Show record number in cube report

Hi,
There is record number for ODS and infoset, where I can get record number for Cube? I remember I can use formulary, however I can not find it.
Thanks

hi,
not sure this is what you are looking
count
try in selection screen, mark 'output number of hits', and entry Max. no. of hits with a big number, estimate will bigger then the total rows you will get.
after execute, there is one column 1ROWCOUNT which's filled with '1', click this column and click 'Total' (icon like E), the last row of table will show the total rows.
or check how to count doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af
hope this helps.

Similar Messages

Show record number in forms

Hi Sir,
When I retrieve 10 records, I would have a non-database column on form to show the record number from 1..10.
When I delete one of the record in the middle of the 10 records, say record 5, all the other record number should be reflected correctly.
and when I scroll down to see more record, it should start from record 11 onwards.
Is there any way of doing this without writing to much code?
Please help.
Thanks.

Try using a formula field that has for formula :system.trigger_record.
I'm not sure, but if this doesn't do it, then you'd have to write lots of code. And that would also run quite slowly.
null

How to disable showing page number on oracle report

Hi,
when i am using ttitle and btitle options in oracle report, page number & date gets automatically added top of my report. Is there any option if i don't want these two to appear on my report. how can i disable them.

Hi,
user8531525 wrote:
Hi,
when i am using ttitle and btitle options in oracle report, page number & date gets automatically added top of my report. Is there any option if i don't want these two to appear on my report. how can i disable them.When you use the word "report", people (like Tubby) are likely to think you are using Oracle Reports, rather than SQL*Plus. Avoid the word "report", or else make it clear what you're doing.
By default, TTITLE puts the date on the left, and the page number on the right.
If you don't want them, put something else there. Explicitly put an empty string there, if you don't want anything else:
TTITLE LEFT "" CENTER "Monthly Firbolig Summary" RIGHT ""

I want to show Vendor Number in CS11 report

Dear Guru,
Please help me to display vendor details in report CS11- BOM EXPLOSION LEVEL BY LEVEL.
INPUT: 1) HEADER:2) PLANT:3) ALTERNATIVE:4) BOM APPLICATIN : BEST
OUTPUT: VENDOR IS NOT DISPLAY THERE
where is customization, settings for display vendor.
MANOJ

Dear Monoj
Please enter the following details
In CS11- BOM EXPLOSION LEVEL BY LEVEL.
INPUT: 1) HEADER:2) PLANT:3) ALTERNATIVE:4) BOM APPLICATIN : PP01 or as applicable
Now once you have excuted , system will display a result with qty , BUM, Item detauils etc .After that you goto Change Layout Option (coulr ful checker box -just beside the Envelope symbol ) -Here you will find list of Filed in hidden column -Select Vendor Filed in the down list and drag it to Dsiplay colu,mn and SAVE.
Try and come back
Regards
JH

Special Field- Record Number count incorrect

Hi,
Looks like the record number special field is displaying the record count incorrectly. There are no records returned by the query nor there are any records in the detail section of the report. But the record number in the report footer shows 1. Is there any way to fix this?
Thanks in advance,
Sirisha

One way to "fix" it would be to do a count on a field in the details section and then compare that count to NULL or zero and if so then display zero otherwise display the recordnumber.
1. Create a running total on a field in the details section that doesnt reset.
2. Create a formula with:
if isnull({#RTotal0}) or {#RTotal0} = 0 then 0 else recordnumber
3. Display the formula instead of the recordnumber in the report footer.

Max number of records in a cube & architectural issues

Hi,
Sorry if my question was already done but i can't find the same question with the research button (may be i have not the good words for search, I'm not english).
I am on a BIG BIG IP project. The forecast volume of planned records is about 1.000.000.000 records a year. So we choose to split records toward many cubes.
1) Is there a maximum number of record supported by a cube to be planned? We planned to put 100.000.000 records maximum on a cube to be planned. Is it too much?
2) If I make 100 cubes (one for each organizational entity) with 10.000.000 records per cube and if I "plug" a planning layout on these 100 cubes with a multiprovider, will IP:
spread time to search the good cube to write in (due to the selected entity) in the 100 cubes (too much time !), or,
search directly in the good cube (thanks to user exit that match cube with selected entity), so the response time will be about the same as the one for 1 layout plugged on 1 cube of 10.000.000 records?
Thanks a lot, and sorry for my english language level
Georges

Hi Georges,
Having too many records in the cube should not be very detrimental for performance of planning application as long as you can ensure that the data volume that you fetch at one go is restricted to reasonable limits, using restrictions in filters (the more restrictive the better). Take care of this while modelling both your planning functions/sequences and input-ready queries.
I understand that you'll need to create a multiprovider for reporting purposes, but if you dont need the data from more than one cube for planning purpose, it will be better to create the aggregation level (and rest of the planning model) on top of individual cube. In case, you want to use the same planning function/input queries for multiple cubes (which will probably be the case), you can create the aggregation levels on the multiprovider but make sure you restrict the characteristic 'infoprovider' properly in the filter restrictions to avoid the function reading unnecessary data from many cubes.
Hope this helps.

Report showing the number of active users in the system

All,
There is a standard SAP report which shows the number of active users in the system (output same as AL08).
Does anyone remember this?
Cheers,
Bidwan

Hello Bidwan,
Are you talking about the report RSUSR000?
Regards.
Ruchit.

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to find number of records in a cube and ODS....

Hi,
How do we find total number of records in a cube and ODS?
Is there any Tcode for this ?
From the content it is difficult to get the number of records, if it is more in number.
Thanks,
Jeetu

Hello ,
Please check the following thread,
Number of records in a infocube
hope it helps,
assign points if helpful.

Number of records in BPC Cube

Dear Friends,
I am working in EPM10 NW/BW 7.31.
I just want to know how can I find number of records in BPC cube from the back end (i.e using T-Code RSA1)
As I am not a BW expert, any simple suggestion will be appreciated.
Thanks,
Rahul

Hi Rahul,
The way I do it is right click on the cube, then display data.
goto the bottom section of the menu where you see the following:
tick output number of hits
also change the max no, of hits to a high number
then run
in the output screen you sum up the first column, it will give you the total number of records in the cube
Andy

Record number on report!

Hi!
I'm wondering if it is possible to get on report a record number. On the report i have two repeating frame. I would like to have number of first one so the report would look like this:
*1.* Test name1 <-------- First repeating frame
Department1 \
Department2 <-------- Second repeating fram
Department3 /
*2.* Test name2 <-------- First repeating frame
Department1 \
Department2 <---------- Second repeating frame
Department3 /

Hi!
As you have two repeating frames, you are having two groups.
In each of this groups create 1 summary column each of Summary function : Count.
Source : A field from group1 and group2 (test name group and department name group in your case.)
Reset At : Report and and group 1 respectively
Hope this helps.
Regards
Arif

Hierarchy datasource is showing wrong number of records

Hi,
I have to load hierarchies from r/3 to BW.when i test my hierarchy DataSource in RSA6 number of records its showing is 40,where as my R/3 system has 45 records for the same hierarchy.Can any one please let me know why its showing different number of records and how to overcome this problem.

Hello VaKa,
How r u ?
Just load the data to the PSA and identify which records are missing, you can do this, u have small amount of data. Then you can identify which 5 records are missing and it will help to find the reason as well.
Best Regards....
Sankar Kumar
+91 98403 47141

When we drilldown at document level it displays one record for each cube

Dear Experts .
The users want to see the report by status for the order detail report at document level it displays one record for each cube .
They want to see the single line for the order quantity , Amount, Billing quantity delivery and amount along with the Sales order number , billing document number billing date , delvert date ..et in signgle line. ( Sale order DeliveryBilling)
When we are doing on Multiprovider recording displaying from each cube.
We have tried with Constant selections and it is not giving the required results m since these want to see by status. Due to huge data performance reasons we re unable to use it .
Please provide your valuable inputs.
Thanks,
Mahesh.

Mahesh,
If you want to get detail data with respect to Sales order - delivery - Billing, on top of Multiprovider you can come up with Constant selection.
But I am not clear that why constant selection is not working properly, can I have some light on that.
Probably, you are struggling with multiple records .
I suggest you to go with end routine and map all fields to one IC and do reporting on that single IC, then your requirement will fulfill.
But here we need to take care of performance issues and process chain scheduling wile loading deltas.
If Multiprovider is not working properly , then try with Infoset(If you have more than 2 ICs it not possible).
Regards,
rvc

Retrieve All records and display in Report using CAML query in Report Builder if Parameter value is blank

Hello Experts,
i have created a report where i have one parameter field where user will pass parameter(e.g. EmpId). As per parameter record will fetched to report if no parameter is passed then it will display all records. I have done it by taking SqlServer Database as datasource.
by using Following method
Now i would like to do it by taking Sharepoint List as Datasource. For that what would be the CAML Query.
Here is my existing CAML query.
<RSSharePointList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ListName>Employees</ListName>
<ViewFields>
<FieldRef Name="Title" />
<FieldRef Name="FirstName" />
<FieldRef Name="LastName" />
<FieldRef Name="FullName" />
<FieldRef Name="UserName" />
<FieldRef Name="Company" />
</ViewFields>
<Query>
<Where>
<Eq>
<FieldRef Name="Title" />
<Value Type="Text">
<Parameter Name="EmployeeId"/>
</Value>
</Eq>
</Where>
</Query>
</RSSharePointList>
The above code is working if i am passing an employeeId to Parameter. If nothing is passed, it is Not retrieving any record.
Please suggest
Thank you
saroj
saroj

Your problem follows the well-established pattern of using an "All" parameter filter in SSRS. There are a few approaches depending on the size of your data. The easiest one is to return all data from CAML and then filter it within SSRS, the following thread
provides some examples,
http://stackoverflow.com/questions/18203317/show-all-records-some-records-based-on-parameter-value.
Other options include passing all of the possible values within the CAML query when "All" is selected, using multiple Report Files to distinguish between both CAML queries, or to use multiple datasets with some logic to show/hide the correct one.
Dimitri Ayrapetov (MCSE: SharePoint)

How to print blank records after the detail records in a masterdetail report

Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Your solution works when I am not limiting the no. of records per page for a department to 10 records and when I want to print blanks lines for the depts that has fewer than 10 employees in it.
Exactly in my report I have several dept's that has more than 10 emp's. In such cases I'll be printing first 10 in one page and the rest in the next page. Now I want to dynamically print the blank lines in the second page depending on the no. of emp's on that page. I tried to acheive this by using a CS column that reset's at page level but, REPORTS is not letting me use CS column that reset's at page level in a format trigger. I also tried to copy the CS value into a parameter and or to a Place holder column and did not help.
Any more work around ideas to acheive this?? please help.
Thanks alot
Kavita.
Hi
Create a column called Serial_No in ur emloyee query like this
select 1 , empno ,ename from emp;
Create a summary column on the serial column with the function SUM
and resetting it to Page
Display the column in the report by using the text color as white
so it doesn't display in the report
I think this should help u i believe
Sri
Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Show record number in cube report

Similar Messages

Maybe you are looking for