Record number on report!

Hi!
I'm wondering if it is possible to get on report a record number. On the report i have two repeating frame. I would like to have number of first one so the report would look like this:
*1.* Test name1 <-------- First repeating frame
Department1 \
Department2 <-------- Second repeating fram
Department3 /
*2.* Test name2 <-------- First repeating frame
Department1 \
Department2 <---------- Second repeating frame
Department3 /

Hi!
As you have two repeating frames, you are having two groups.
In each of this groups create 1 summary column each of Summary function : Count.
Source : A field from group1 and group2 (test name group and department name group in your case.)
Reset At : Report and and group 1 respectively
Hope this helps.
Regards
Arif

Similar Messages

Show record number in cube report

Hi,
There is record number for ODS and infoset, where I can get record number for Cube? I remember I can use formulary, however I can not find it.
Thanks

hi,
not sure this is what you are looking
count
try in selection screen, mark 'output number of hits', and entry Max. no. of hits with a big number, estimate will bigger then the total rows you will get.
after execute, there is one column 1ROWCOUNT which's filled with '1', click this column and click 'Total' (icon like E), the last row of table will show the total rows.
or check how to count doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af
hope this helps.

Need help on filtering out one record from a report and open in new page

Hi I am new and embarrassed to write in the forum asking silly questions. Thing is I am learning all from scratch without help from anyone. I have created a database (have previous knowledge only from Access) and have managed to create a beautiful report from a search filter. This report lines up several records matching what I needed. Now, I want to make the whole report with hyperlinks to a detailed page on each of the records in the report. I have tried using the feature where one can make one column hyperlinked and redirect to a new page, where I am getting all the records again - instead of only getting the record I am clicking on. I have looked and looked in the forums without finding solution and I have tested and tried various methods without luck. I am suspecting that I need some sort of knowledge on how to write a select query with where conditions that can apply to filtering out a record from one report to get another detailed on only one object (i.e. record). :/ Stupid or what?

Hrefna.
What you need to look into is two things:
1) The link you defined, needs to set additional attributes for the target page. In the "Column Link" box, you have set the link to "Page in this Application" and followed by the page number (let's say, Page 10). Below that, you should set an Item to an item on you target page (let's call that P10_PRODUCT_ID). This item should be the primary key of your detail table (on the targe page). You can select this item from the popup list. The Value of the item should be picked from a popup list as well, being the value from the record you clicked on. This should then transfer your selected item to your page. The URL will then have something like P10_PRODUCT_ID:5 at the end.
2) On the target page, 10, you must change the query slightly, so that it adds a WHERE clause:
WHERE PRODUCT_ID = :P10_PRODUCT_ID
Now, you should be set.
Hope this helps.
Borkur

Record Number In Cross Tab

Hello...
How can i add Serial Number for each records in crosstab reports.
Thanks ......

Hello.....
CR 2008 licensed version.
We are direct customer of Business Objects
Thanks.

How to get the Data Record Number in BI 7.0?

Hi All,
In our requirement we need to load the Data Record Number in the DSO. I got the Request ID and Data Packet Number but not the Data Record Number.
Does anyone has any idea?

Hi......
When the data is activated in DSO, it is written to the table of active data, where it is then available for reporting. Requests are sorted by the key of the DataStore object, request ID, data package ID, or data record number.
You just load the data to the DSO.....and activate it.......it will autometically get generated.......You cannot load it from one DSO to other beacuse in this case Change log table is used........and this filed is in active table..........I think you need this fir reporting purpose.....so load it and activate the DSO......then it will be available in your active table for reporting.........because reporting is done on active table.......
Check this link :
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/49453cabf4ef6fe10000000a114084/frameset.htm
Hope this helps you....
Regards,
Debjani....
Edited by: Debjani Mukherjee on Sep 16, 2008 5:22 PM
Edited by: Debjani Mukherjee on Sep 16, 2008 5:25 PM

Vendor Master Record number ranges

Hi,
We have one requirement . At present my client is maintaining the vendor master record number ranges with 4 digits. Ex. 0001 to 9999
His present requirement is that to maintain the number ranges with 4 digits .ex. 00001 to 99999. They want this should apply even to existing records. Ex: Old number 2345 , they want the present number should be 02345.
Request you to please help in resolving the issue. Thanks in advance for the help. Matter is urgent
Thanks
D.K.Lakshmi narayana

Hello Lakshmi,
It seems to me these are your alternatives.
1) For each old vendor in the 4-digit scheme, create a new vendor master record in the 5-digit scheme with the leading zero. Then, transfer all open documents/master records (invoices, purchase orders, info records, etc.) from the old vendor to the new vendor. Then, block the old vendor.
2) Same as previous except instead of changing all open documents, only change the master data (e.g., info records or long term contracts or agreements) to the new vendor master record and continue to use the old vendor master record until the open documents are closed. Then, block the old vendor master record.
I think option 2 will be the "safer" choice. Plus, for reporting, you will probably need to continue using both vendor numbers for a while.
Maybe someone else has an easier way...
Cheers,
Larry

Need help Updating Records in a Report Region

We have created some javascript to check a drop down used in a report region.
This is the way the report is supposed to work:
The first time the user comes to this screen he will go down the list and select a value of '1' or '2' for col2.
When col2 drop down has a value of 1 then we want to disable col3 and col4.
Then the user will click on the Submit button.
When he clicks on the Submit button then we want to set col4 to have a value of sysdate in the database table for any record where col2 had a value of 1.
The next time the user comes to this screen he will select values for col3 and col4 of the records that col2 had a value of 2 (meaning col3 and col4 are enabled)
This works fine if there is only one record in the report region.
The problem is when we have more than one record.
for example:
Say we have two records...
for record1 the user selects '1' for col2 and for record2 the user selects '2' for col2.
When the user clicks on the Submit button col3 and col4 get disabled and col4 gets set to sysdate for record1, while col3 and col4 remain available but empty (because the user has not made a selection for these columns at this point) for record2.
When the user comes back to this screen he now selects a value for col3 and picks a date for col4 for record2. When he clicks on the Submit button the value for col3 and the date entered in col4 for record2 should get updated in the database table and it is but the col3 value and the col4 date is being inverted with record1's data for some reason.
Can you please tell me how to fix this?
This is what the user has selected on the screen:
(COL2) (COL3) (COL4)
Requested? Granted? Response Date
Record1 NO - 13-APR-09
Record2 YES YES 20-APR-09
After the user clicks on the Submit button this is how the screen displays it back:
(COL2) (COL3) (COL4)
Requested? Granted? Response Date
Record1 NO YES 20-APR-09
Record2 YES N/A 13-APR-09
I am including the code from my update staement below:
DECLARE
A_ID NUMBER;
requested NUMBER;
grnted NUMBER;
respdate DATE;
f01 = AID ID
f02 = REQUESTED YES OR NO
F03 = GRANTED YES OR NO
F04 = RESPONSE DATE
BEGIN
FOR i IN 1..HTMLDB_APPLICATION.G_F01.COUNT LOOP
BEGIN
A_ID := HTMLDB_APPLICATION.G_F01(i); -- this is hidden
requested := HTMLDB_APPLICATION.G_F02(i); -- (YES or NO)
grnted := HTMLDB_APPLICATION.G_F03(i); -- (YES or NO)
respdate := to_date(HTMLDB_APPLICATION.G_F04(i),'MM/DD/YYYY');
EXCEPTION
WHEN OTHERS THEN
A_ID := HTMLDB_APPLICATION.G_F01(i); -- this is hidden
requested := HTMLDB_APPLICATION.G_F02(i); -- (YES or NO)
grnted := 3; -- (YES or NO)
respdate := sysdate;
END;
UPDATE TBL_AIT
SET b_requested_id = requested,
b_granted_id = grnted,
b_response_date = respdate
WHERE ait_id = A_ID;
END LOOP;
END;

Hi,
Any disabled items are not submitted with the page - therefore, your f03 and f04 collections would be one value short. This is a browser feature rather than an Apex feature.
You can get around this by enabling all items before the submit takes place. Have a look at: Re: A better method of handling tabular forms with variable column type? This is for disabling items mainly, but includes an enableItems() javascript function that should help you.
Andy

Record Number in QLD

Hi again,
Experts I would like to ask how to generate a record number in QLD.
Im trying to get the list employee and I want to put an incremental no in the side. Example :
Names
Joe Clint
Clint Pow
Large Clint
The result must be :
Names :
1. Joe Clint
2. Clint Pow
3. Large Clint
How can i do this? in crystal report it is already a function but in QLD i cant find any. Please advise thank you very much.
regards,
Clint

Wow thank you very much for a very fast reply!
regards,
clint

How to inlcude all records in a report, with a formula result of 0 or 0?

I'm reporting on classes scheduled for a certain location, and calculating the number of available seats per class. A formula will give me the net seats available (Max seats-count of students). BUT if there are no students enrolled, class does not appear on the report. Formula is {SCHEDULES.qy_sch_max} - Count ({WAITING_LISTS.no_emp}, {SCHEDULES.cd_crs)
What am I missing? Currently using Crystal 8.5 and reporting against a SQL database.
Appreciate your help.
christi

A: How to inlcude all records in a report, with a formula result of 0 or >0?

thanks, Sanjay - been there done that.
basically, I need to show the net result for the open seats available,which will be the same as the max seats offered.
I tried the following:
If Isnull{WAITING_LISTS.no_emp}
then {@Open}={SCHEDULES.qy_sch_max}
else
{SCHEDULES.qy_sch_max} - Count ({WAITING_LISTS.no_emp}, {SCHEDULES.cd_crs})
and got a message "Missing the then". (@Open is the formula title)

Special Field- Record Number count incorrect

Hi,
Looks like the record number special field is displaying the record count incorrectly. There are no records returned by the query nor there are any records in the detail section of the report. But the record number in the report footer shows 1. Is there any way to fix this?
Thanks in advance,
Sirisha

One way to "fix" it would be to do a count on a field in the details section and then compare that count to NULL or zero and if so then display zero otherwise display the recordnumber.
1. Create a running total on a field in the details section that doesnt reset.
2. Create a formula with:
if isnull({#RTotal0}) or {#RTotal0} = 0 then 0 else recordnumber
3. Display the formula instead of the recordnumber in the report footer.

How can I numbered the records in the report

Hi, can anyone please show me how do I number the records in the reports in the Report Builder?
Thank you.

Hi,
Follow the following steps:
1. Create a summary column in the data model of the report.
2. Select the function as Count.
3. Select the source for which you want to generate the serial no.
4.Reset the column at Report level.
5. Now create a field in the paper layout of the report and select this summary column as the source. The field should be in the same repeating frame as its source.
This will generate the nos. as reqd.
Swati

How to display serial number in reports

Hi,
I want to display serial number (for each row of records retrieved ) in reports.How can I accomplish that?Please help
Regards,
Nycy

Like this:
SELECT ROWNUM RN,
COL1,
COLN
FROM (SELECT COL1,
COLN
FROM TABLE
ORDER BY ORDERCONDITION
or
sometime you sould use logic like this:
first, you should take a summry column into relevent group.
then
goto its property
then
goto Function field
then
select Count from list
then
select the source means you want to count records acoording to which column.
then
select from relevent group cource from Reset at
Now, give this summary column source to the required field then generate the report.
If you feel better to understand then give comments otherwise mail me at "[email protected]"I will give you the complete procedure with images.
Edited by: Waqas Attari on Feb 18, 2009 7:13 AM

How to give serial number in reports

Hi,
I want to display serial number (for each row of records retrieved ) in reports.How can I accomplish that?Please help
Regards,
Nycy

Dear
sometime you sould use logic like this:
first, you should take a summry column into relevent group.
then
goto its property
then
goto Function field
then
select Count from list
then
select the source means you want to count records acoording to which column.
then
select from relevent group cource from Reset at
Now, give this summary column source to the required field then generate the report.
If you feel better to understand then give comments otherwise mail me at "[email protected]"I will give you the complete procedure with images.

How Many Records a Desktop report can display

Hi All,
Just wanted to ask a basic question. Is there any limitation that a discoverer desktop report can display only a certain number records.
My report is completed with error message saying fetched maximum number of records, Report may not contain all records.
Thank you,

madhu
go to tools --> options --> query governor tab and deselect the "limit retreived query data to:"
--boys

How can i get the tax code from Condition record number

Hi all,
i have the Condition record number from which i have to get the tax code as i looked inthe KNOP that Condition record number there but no tax code is maintained there.
so is there any other way to find the tax code for particular Condition record number
Regards
suresh

hi suresh,
can u tell me the field name for condition record number and in which table it is stored.
because i knew one condition number which is stored in table EKKO and the field name is
KNUMV- Number of the document condition.
from ekko take relevant details and look for ekpo where u find the tax code
filed name of the tax code id MWSKZ- Tax on sales/purchases code

Record number on report!

Similar Messages

Maybe you are looking for