ShowDocument not working with Host name in IE

I have the following applet code:
try
     URL NodeURL = selectedNode.getNodeURL();
     if (NodeURL != null)
String pageName = selectedNode.getNodeURLTarget();
getAppletContext().showDocument(NodeURL,pageName);
     } catch (Exception e)
System.out.println("6.mousePressed Execept = ");
          e.printStackTrace(); // fps '04 uncommented
Html page.
<html>
<head>
<title>Module Home Page</title>
</head>
<frameset cols="33%,*">
<frame src="http://11.2.2.125/java/WebViewTree.html" name="treedisplay" marginwidth=0 marginheight=0>
<frame src="GenInfo.html" name="pagedisplay" marginwidth=5 marginheight=5>
</frameset>
</html>
When I bring up my webpage via IP(http://11.2.2.125) everything is ok. If I use the host name (http://davehost) the page does not get displayed in the frame named 'pagedisplay'.
Now this only happes with IE (6.0 sp2) it works with Netscape.
I notice the following:
If I change the code to use getAppletContext().showDocument(NodeURL,'_blank'); it actually pops up a new window and works ok.
I noticed that the browser never sends the 'GET' when executing the showDocument.
Any one notice this or notice someting I am doing wrong.
Thanks,
Frank

Hard coding the ip is not a good practice more over try using the relative path
such a ..\ for directory..
and i believe that the ip need not be specified when you are deploying it on web server.

Similar Messages

IM not working with hosted domains

My IM working with default domain within portal and from jnlp site but with my hosted domains is not signing in. I have IMS 7.1 (patched) Sun JES 2005Q4
It dont even generate any log for hosted domains.
IM log set at DEBUG level.
Does IM 7 support hosted / virtual domains in only one IM instance (single install)

I dont know much about it because there is no log fot failure logins. It simply working with default domain but not for any hosted domain. I also followed following.
* cd /opt/SUNWiim/html/en/
#vi im.jnlp
Add the following in the im.jnlp just above the </resource> tag
<property name="com.iplanet.im.client.allowarobase" value="true" />
* Redeploy im resources into the web-container with recent changes
* Now launch the client from http://<hostname>:<webport>/im/en/im.jnlp
and then login as [email protected]
How do i Redeploy im resources into the web-container with recent changes

.mac does not work with domain name

I used Iweb 08 to host my domain name from godaddy.com.
Godaddy account is: http://www.eyalphotography.com/
.mac web page is: http://web.mac.com/enahmias
I published to .Mac and went through the personal domain name procedure (using .Mac account settings and godaddy CNAME) so now .Mac is my host and I don't upload anything to godaddy. Updates are made to .Mac. but even after 4 days when trying to go to http://www.eyalphotography.com/ I still get this message: “Safari can’t open the page “http://www.eyalphotography.com/” because it can’t find the server “www.eyalphotography.com”. If I go to http://web.mac.com/enahmias no problems.
I want my page updated to http://www.eyalphotography.com/ that is the whole point of doing the cname and forwarding my domain. People should just go www.eyalphotography.com and done.. not web.mac.com/eyalphotography etc.. it beats the purpose of this thing.
So any solutions why it’s not working?

Here is a step by step on how it finally worked for me.
1. From Iweb choose domain name
2. when logged to .mac click on domain name
3. If you have any troubled name there just remove it.
4. Create a new domain name and follow instructions until it says to go to your domain registrar and continue later
5. Log to godaddy.com
6. Under the Domains menu click on My domain names
7. Click on your domain name that you want to change cname for .mac
8. On the top third of the page in the middle click on Total DNS Control and MX Records
9. On the page that opens in the cnames section click on the Reset to default setting
10. Wait a few minutes, and then refresh the page. Then on the same section under www. click on the pencil icon to edit the cname
11. Leave www. alone and on the next line type: web.mac.com and ok the changes.
12. Log out of godaddy
13. Return to the .mac domain name dialogue box and finish according to the prompts.
14. Go back to iweb and republish ALL to .mac
15. In my case it took only a few hours and after 2 weeks of frustration it worked as magic.
Good luck
Message was edited by: eyaln

Sender FTP Adapter not working with certain name

Hello,
We're facing the next problem within XI.
We configured a sender FTP adapter within the central adapter engine. This adapter is configured correctly however for some reason it is not picking up any file from the FTP server.
Changing status to inactive-> active again all kinds of modes and configs we tested.
However when copying this non-working adapter to a new one with a different name (Configuration is exactly the same!!!!!) and use this one in the sender agreement it worked immediately.
Somebody else faced similar problems and managed to solve it because for this error we don't want to adjust our naming conventions....
Thanks,
Emile

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

Windows 8.1 with Hyper-V external switch - 802.1x not working in host nor guest

Hi,
I have Windows 8.1 with installed Hyper-V and virtual machines connected via Hyper-V Switch - External. 802.1x wired authentication is not working in host nor in guest machine (computer is not responding to switch requests). If I will change switch mode
to Internal/Private it will start working.
Do you have any idea how to get it working also in external mode?

Hi,
What is the physical network configuration in your environment? Are you using wireless or wired connection?
We tested this issue as you described here, and the external switch is working fine.
Have you tried to delete the created switches and recreate one, test this issue again?
Yolanda Zhu
TechNet Community Support

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

EPrint does not work with Google Apps for Business (hosted email)

I have looked up numerous posts, from back into 2011 even, and HP still has not resolved this.
HP's ePrint does not work with companies using Google Apps for Business (hosted email).
Our emails come from our domain, but from the servers/DNS of Google, so we wind up getting
the "550 5.7.1 Command Rehected" error.
This is a major issue as more and more companies (especially small business owners) are moving away
from having in-house/Exchange servers, and they are moving toward hosted systems.
You really need to find a way to stop rejecting emails coming from Google Apps hosted email.
It's been around 4 years now (looking at previous posts). Why hasn't HP found a resolution to this yet?

I have brought your issue to the attention of an appropriate team within HP.
They will likely request information from you in order to look up your case details or product serial number.
Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Membership rules does not work with UDF column name having the max length

Found a bug in OIM .
Membership rules does not work with UDF column name having the maximum length
Steps to Reproduce
1.Create a UDF having max column name length for eg UDF_USR_PERSONAL_SUB_DOMAIN_CO (lable = Personal Code)
2. Create a simple Rule like Personal Code = 7000
3. Assign this Rule as a member ship rule of a Group.
4. Create a user with Personal Code = 7000.
5. User doesnot get the group membership.
Thanks
Suren

Yes , i verified logs as well .
If you just decrease the column name length , w/o making change to any other attributes , it starts working ..
Thanks
Suren

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Applet does not work with a proxy server.URgent

Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
     at com/ms/net/wininet/http/HttpInputStream.connect
     at com/ms/net/wininet/http/HttpInputStream.<init>
     at com/ms/net/wininet/http/HttpURLConnection.createInputStream
     at com/ms/net/wininet/WininetURLConnection.getInputStream
     at TalkClientApplet.rendezvous
     at TalkClientApplet.actionPerformed1
     at TalkClientApplet.start
     at com/ms/applet/AppletPanel.securedCall0
     at com/ms/applet/AppletPanel.securedCall
     at com/ms/applet/AppletPanel.processSentEvent
     at com/ms/applet/AppletPanel.run
     at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
          System.out.println ("Protocol: " + url.getProtocol());
          System.out.println ("Host :" + url.getHost());
          System.out.println ("Port :" + url.getPort());
          System.out.println ("File :" + url.getFile() );
          System.out.println ("Full :" + url.toExternalForm());
          System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
     System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopper

Thanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
            URL url = new URL(protocol,hostName,portNumber,URLstring);
            InputStream in = url.openStream();
            BufferedInputStream bis = new BufferedInputStream(in);
            StringBuffer input = new StringBuffer(60);
            int c;
            while ((c = bis.read()) != -1){
                System.out.print((char)c);
                input.append((char)c);
            bis.close();
            dataFromServer = input.toString();
        catch(Exception ex) {
            ex.printStackTrace();
        }I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ?

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

My 4th gen iPod Touch does not work with Ford sync since updating OS

When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

Have lots of issues with Fords MySync and here's some info that might help....
Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
http://www.ford.com/syncmyride/
or call 1-800-392-3673 Opt 3
A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
Good Luck

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

ShowDocument not working with Host name in IE

Similar Messages

Maybe you are looking for