Showing 0 value in vertical bar chart

Hi,
is it possible to show the 0 value in a bar chart using Show data labels "Always"? By default it is suppressed.
Zero is a success value in quality reporting and my clients want it to be visible, so they do not confuse it with "no data delivered". Is there any way to highlight Zeros in a bar chart?
Mny thx Thomas

We had the same issue and used a work around. Use case when value = 0 then 'Some value of choice' and it will be seen on the chart.
Let the client know that 'Some value of choice' on the chart means 0. Sounds ridiculuos, but we did not find any other alternative.

Similar Messages

Display name and value on label of vertical bar chart

Hi,
i have a vertical bar chart. On x-axis there are Countries: (Italy, Netherlands and so on), and on y-axies there are the values.
When i mouse over a bar, on default is shown only the value. I want show a tooltip with the value and the name.
For example, when i mouse over Netherlands bar, i want to display, NETHERLANDS , 92,45.
I've modified bar.pcxml file adding following string:
FormatString='%_YVALUE'
I've restarted all processes, but now when i mouse over on bar i see a tooltip with %_YVALUE text.
What's the correct syntax?
Thanks
Giancarlo

I don't think its possible to use this '%_YVALUE' for Bar graphs. Please refer to table 1.1 in the below link for the supported values for FormatString for each graph type:
[http://www.corda.com/docsource/doc4/popchart/docs/builder/creatin7.htm#447987]
As you can see, '%_YVALUE' and '%_XVALUE' are supported for X-Y graphs only, which I guess are Scatter and Bubble charts. I tried using other ones like '%_GRAPH_TOTAL' for bar graphs which just works fine.
Hope this helps!!
Thanks

How to create a vertical bar chart from a table? (PHP, HTML and CSS)

Hi everyone,
I have created a table and wish to proceed to do it even better in terms of analysis pattern. I want
to create a vertical bar chart from the created table but I dunno how to start it.
Here is the code for the table:
<?php
$gpa11=$_REQUEST['gpa11'];
$gpa12=$_REQUEST['gpa12'];
$gpa21=$_REQUEST['gpa21'];
$gpa22=$_REQUEST['gpa22'];
$gpa31=$_REQUEST['gpa31'];
$gpa32=$_REQUEST['gpa32'];
$gpa41=$_REQUEST['gpa41'];
$gpa42=$_REQUEST['gpa42'];
$gpa51=$_REQUEST['gpa51'];
$gpa52=$_REQUEST['gpa52'];
?>
<!doctype html>
<html lang="en">
   <head>
      <meta charset="utf-8">
      <meta name="viewport" content="width=1024">
      <title>Feng Mentor Mentee</title>
   </head>
   <body>
      <div id="wrapper">
         <div class="chart">
            <h3>GPA Performance Graph</h3>
            <table id="data-table" border="1" cellpadding="10" cellspacing="0"
            summary="The performance of students throughout the years in university">
               <thead>
                  <tr>
                     <td> </td>
                     <th scope="col">Year 1</th>
                     <th scope="col">Year 2</th>
                     <th scope="col">Year 3</th>
                     <th scope="col">Year 4</th>
                     <th scope="col">Year 5</th>
                  </tr>
               </thead>
               <tbody>
                  <tr>
                     <th scope="row">Sem 1</th>
                     <td><?php echo $gpa11;?></td>
                     <td><?php echo $gpa21;?></td>
                     <td><?php echo $gpa31;?></td>
                     <td><?php echo $gpa41;?></td>
                     <td><?php echo $gpa51;?></td>
                  </tr>
                  <tr>
                     <th scope="row">Sem 2</th>
                     <td><?php echo $gpa12;?></td>
                     <td><?php echo $gpa22;?></td>
                     <td><?php echo $gpa32;?></td>
                     <td><?php echo $gpa42;?></td>
                     <td><?php echo $gpa52;?></td>
                  </tr>
               </tbody>
            </table>
         </div>
      </div>
   </body>
</html>
Here's the look:
                                                          GPA Performance Graph
Year 1
Year 2
Year 3
Year 4
Year 5
Sem 1
Sem 2
Please help me on this because this is my 1st project on php.

Hi
Are you using BI query? If yes then follow the steps -
1. Take Sales org in rows of BI query. & take invoice type & Key figure in Columns.
2. In VC use this query & drag chart from the output of this query.
3. Right click on chart & go to 'Configure Element'. There select Chart Type as 'Bar chart'
4. Below that you will get default option as clustered, there you select 'Stacked'
5. Create Data series as per your requirement.
6. Arrange proper layout of the model & then deploy.
You will get required output in stacked format.
Regards
Sandeep

Percentage Stacked Vertical Bar Chart

`Hi everybody,
i have a new question for you.
i am just working on a stacked vertical bar chart.
initial position: the chart is grouped by the column continet and there is one measure revenue and a column state (Vary Color By(Horizontal Axis)).
My question is: Is there a possibility to let the chart shown in percentage, without formating the column formula of the measure in any kind?
So, one bar part visualizes the revenue for one spezific state.
In my case the bar part should be displayed in percentaged height of the whole revenue of the continent.
Does anyone of you have an idea?
Thanks,
Alex

Plaese Guys,
i need your help.
Thanks

WA 9.3.1, centralized the value position in bar chart?

In Web Analysis 9.3.1, I have one bar chart, when I select show value, the figures (amount or percentage) will be displayed in the all the bars,. However, I notice the position of the values are at the top of the bar.
I am not able to find the option to make the value to be displayed in the middle (vertical center) of the bar. Anyone has solution?
Thanks a lot

Hi Jyothy ,
Chop down your formula ,place each section of formula as a column and check for error .
use below
[Includingweekends]=Sum(DaysBetween([Eff_st_dt];RelativeDate([Eff_end_dt];1) ForEach([Eq No];[Recp_Id];[Eff_st_dt];[Eff_end_dt]))
hrs_avail=sum(If([Prompt for Weekends]="N") Then ([Prompt for Available Hours] * [Excluding weekends]) Else ([Includingweekends] * [Prompt for Available Hours]))

Display -ve Measure Values in Horizontal Bar Chart on right hand side or in bar

In OBIEE I have an issue where the negative measure values in a horizontal bar chart are displayed on the left and overlap with the Y axis values, how do I force these values to be displayed on the right or in the bar itself ? The measure values are set to always on, hoverover cannot be the solution

Hi,
It should not be overlapped. If you are using horizontal bar then 0 will come in center. It should show structure like:
|
|
|
|
|
|-------------------------------------------------
-4 -2 0 2 4
May I know in your report, how it is looking and what is your requirement.
Thanks

Create Pie Chart and Vertical bar chart using report builder 3.0 with sharepoint custom list

Hi All,
I have a client requirement to create reports which should show the graphical representation of SharePoint Custom List data. The reports are Month wise and YTD. Also i have to create dashboard.
For creating reports, i have heard about Report Builder and SSRS. I have SQL server 2008r2 and installed report builder 3.0 but i am not aware of creating reports(KPI, Pie Chart, Vertical bar, etc.,) with sharepoint customlist.
Can some one please help me on this.
MercuryMan

Here is some information about using the SharePoint List Data source with SSRS/Report Builder/BIDS:
http://www.infotoad.com/blog/post/2012/10/11/using-a-sharepoint-list-connection-type-as-a-data-source-for-reporting-services.aspx
http://technet.microsoft.com/en-us/library/ee633650.aspx
http://www.codeproject.com/Articles/24469/SQL-Reporting-Services-data-from-SharePoint-lists
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Multi value error in bar chart

Hi,
I am getting the following error in bar chart for recp_id versus actual and budget.
"Formula Evaluation- Error in dataset: Multivalue check formula definition in this dataset context"
I have following report in the tab1, chart on tab2
Class, Eq No, Recp_Id, Status, hrs_used, hrs_avail, rate, Actual, Budget
2         123            R1      A         10        10              5      50     50
2          123           R1      A         _         20              5      0       100
1           234          R2      A         10        5               10    100    50
I have 3 data providers:
hrs_used Dp1: Eq No, hrs_used, compcode,recp_id
hrs_avail Dp2: Eq No, Eff_st_dt,Eff_end_dt,compcode, recp_id
master data Dp3: Eq No, compcode,status, Eq name, class
Merging on Eq No, compcode, recp_id
I was getting multi value error for hrs_avail, actual,budget and resolved it in the report using below formula for hrs_avail. I have multi value error in Budget in the report
[Includingweekends]=Sum(DaysBetween([Eff_st_dt];RelativeDate([Eff_end_dt];1) ) ForEach([Eq No];[Recp_Id];[Eff_st_dt];[Eff_end_dt]))
hrs_avail=If([Prompt for Weekends]="N") Then ([Prompt for Available Hours] * [Excluding weekends]) Else ([Includingweekends] * [Prompt for Available Hours])
Actual=[hrs_used] * [rate]
Budget=[hrs_avail]* [rate]
Report output now:
Class, Eq No, Recp_Id, Status, hrs_used, hrs_avail, rate, Actual, Budget
2          123     R1               A         10        30        5          150     50
1          234     R2               A         10        5         10         100    50
I have an issue with the graph with multi value alert on the top of chart for recp_id versus actual and budget.

Hi Jyothy ,
Chop down your formula ,place each section of formula as a column and check for error .
use below
[Includingweekends]=Sum(DaysBetween([Eff_st_dt];RelativeDate([Eff_end_dt];1)   ForEach([Eq No];[Recp_Id];[Eff_st_dt];[Eff_end_dt]))
hrs_avail=sum(If([Prompt for Weekends]="N") Then ([Prompt for Available Hours] * [Excluding weekends]) Else ([Includingweekends] * [Prompt for Available Hours]))

Possible to show null data in bar chart?

I am creating a report that has a chart that charts when a part was rejected and who it was rejected by (customer or internal). The problem is, that when I create the chart it does not show dates when there is no rejection. I would like the chart to show each day for the month even if there was no rejection. Is there a way to do this?
Thanks,
Cody

hi Cody,
for missing dates, there's a bunch of solutions reviewed here
thanks,
-jamie

Assign Value to Graph/bar chart?help

Anyone who know how to transfer a value in an variable to a graph plot
such as 88/100 marks.The bar status

A cut/paste of a SQL*Plus session is always helpful, especially since your types are not even valid here (you need to use a name other than 'comment').
Change that name and you'll be fine, although I would bulk collect it instead:
create or replace procedure test_data_prodx
(tests out test_data_array)
is
begin
select test_data(name, address, comment) bulk collect
into tests
from customer_data;
end;
/

WAD - Values above Bar Chart not displaying.

Hi All,
Please find the report that created in WAD using Chart.
From the above image, the numbers above the Bars is not displaying except the first Bar. I have checked the Series in WAD and all the settings are same Bar 1 and Bar 2. But still, the values are not displaying except 1st Bar. Please find the settings i made in Web Application designer.
And also some text is displaying "Missing text XXXX". Any settings i need to do for not appearing in the chart, pls suggest.
Do i need to do any other settings for displaying the value above the Bar Chart.
Thanks.

Hello Jalina,
I would echo recommendation from Sapna. Upgrade your IGS if possible.
Goto the IGS Download area in the SAP Service Marketplace.
Download the IGS executable and library patch (igsexe*.sar) for
your platform from
-: http://service.sap.com/swdc
-> Support Packages and Patches -> A-Z Index ->Select "I"
-> SAP IGS -> SAP IGS <version>
-> SAP IGS <version>   -> <operating system>.
Also review notes
896400 BC-FES-IGS Upgrade your WebAS 7.x based IGS
1491848 BC-FES-IGS What IGS should I be using with my Web AS?
844669 BC-FES-IGS Profile parameter of IGS as of Version 7.00
514841 BC-FES-IGS Troubleshooting when a problem occurs with the IGS
If this is not possible can you update the thread with your IGS version and system details?
To find the IGS Version. Call transaction: SIGS - if the IGS server is running
This page shows the versions of the IGS components. The number before
the last number shows the patch level
You will something like this: Version     7200.0.3.1
                                                                           ^
                                                this is your patch level
7200.0.3.1
^^
this is your IGS Version level
this means your IGS is 7.20 Patch 3
You can also check your patch level as follows:
- Start transaction SA38 (or SE38)
- Run the report GRAPHICS_IGS_ADMIN
- Choose the rfc destination, IGS_RFC_DEST should be the default
- Select Status
Best regards,
Oisin

Need to eliminate the Zero values in the marker text in Bar chart

Hi all,
I have a requrement where i have to show the values in the BAR chart . so i have used the following syntax,
<MarkerText visible="true" markerTextPlace="MTP_TOP"/>
but the condition is i have to eliminate the zero value. i.e when the value is zero it should not be shown.
Kindly pelase help me to solve this.
Many thanks in advance,
Regards,
Dhaya.

Hi all,
I found the solution .
below is wat i did.
i have created a variable and inside the group, i ahev assigned and i will check for the conidion whether it is zero or not. if it is Zero then i will display null .
<RowData>
<xsl:for-each-group select=".//SALARY_SCALE" group-by="SALGRADE" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:sort select="SALGRADE"/>
<xsl:variable name="Fcnt" > <xsl:value-of select="sum(current-group()[GENDER='Female']/COUNT) div $total * 100 "/> </xsl:variable>
<Cell><xsl:value-of select="xdoxslt:ifelse($Fcnt=0,'',$Fcnt)"/></Cell>
</xsl:for-each-group>
</RowData>
Regards,
Dhaya.

How to display the dataset field values in my ssrs bar chart report ?

HI i have a Bar Chart report in that i want to display the dataset one field values in my x-axis of my ssrs report? so how should i display those values into my bar chart report?
consider i want to display the Every Qtrly details in my x-axis so how should i ?
can you pls help me out for this

I have added the Category Group into my Report area with required field ,now i will get my required output.

Bar Chart: Bar Z-Index

I am trying to create a vertical bar chart. However, I have run into a small snag.
My chart:
- The X-axis has the next 12 months.
- Y-axis has calculated values.
I have multiple calculated values(bars) for each month(Column). Because of this I need to overlap the bars and show them in order of tallest down-to the shortest.
The problem:
When I overlap the bars it doesn't show all of the bars. The graph draws the bars in order of the timeline. The bar that is earliest in the timeline gets drawn first. Because of this, the shorter bars at the beginning of the timeline get hidden by the taller bars near the end of the timeline.
Is there a way I can sort these bars to show smallest - largest per month in their correct series color?
More Info:
A bar represents a project that can span multiple months.
Dataset:
Project Name, Month, hours
Proj1, Jan, 5
Proj1, Feb, 6
Proj1, Mar, 6 <-- will be hidden by Proj2, Mar, 7
Proj1, Apr, 5 <-- will be hidden by Proj2, Apr, 8
Proj2, Mar, 7
Proj2, Apr, 8
Proj2, May, 7
I hope this edit makes it a bit more clear.
Thanks for the assistance!
Edited by: Joseph Forsythe on Sep 30, 2008 8:18 PM

Hello -
I use Custom XML to accomplish this. You want to define the format of the <label_settings> tag. Below is sample code fron one of my bar charts. I've separated the <format> tag so you can see it easily. Notice the numDecimals:2 that is what defines how many decimals to show.
     <data_plot_settings enable_3d_mode="false" >
        <bar_series style="Default">
          <tooltip_settings enabled="true">
            <format><![CDATA[{%Name}{enabled:False} - {%Value}{numDecimals:2,decimalSeparator:.,thousandsSeparator:\,}]]></format>
            <font family="Tahoma" size="10" color="0x000000" />
              <position anchor="Float" valign="Top" padding="10" />
          </tooltip_settings>
          <label_settings enabled="true" mode="Outside" multi_line_align="Center">
            <format><![CDATA[{%Value}{numDecimals:2,decimalSeparator:.,thousandsSeparator:\,}]]></format>
            <background enabled="false"/>
            <font family="Arial" size="10" color="0x000000" />
          </label_settings>
          <bar_style>
          </bar_style>
          <marker_settings enabled="True" >
            <marker type="None" />
          </marker_settings>
        </bar_series>
      </data_plot_settings>
...You may be able to do this without Custom XML. There is a decimal places field in the Axis Settings section of the chart attributes, but i'm pretty sure that only affects the axis display settings.
Austin

Format SVG bar chart labels

I am currently using APEX 2.2.1.
Here is the SQL for my SVG vertical bar chart.
select * from(select null link, hourstart label,(select count(*)
FROM toctasks.toc_tasker
where (tas_create_dt between
to_date(:P17_STARTDATE||' 06:00','DD-MON-RR HH24:MI')
and
to_date(:P17_ENDDATE||' 05:59','DD-MON-RR HH24:MI'))
and
(trim(substr(to_char(tas_create_dt,'DD-MON-RR HH24:MI'),10,6)) >= hourstart
and trim(substr(to_char(tas_create_dt,'DD-MON-RR HH24:MI'),10,6)) <= hourend )
and instr(:P17_INCLUDE_LOGONLY,tas_status) > 0) value from testtocday
order by hrseq)
The X axis labels are the hours of the day (hourstart), starting at 0600 and ending at 0500.
I would like to do any one of the following:
1. Bold and red the hour label when it is equal to 0600, 1400 and 2200.
2. Change the color of the bar when the hour label is equal to 0600, 1400 and 2200.
3. put some sort of vertical marker in the chart when the hour label is equal to 1400 and 2200.
Any of this possible?
Thanks,
Bob

hi patrick--
i'm not seeing this limit in my tests. i tried both vertical and horizontal bar charts and was able to display labels like ename||ename||ename||ename||ename w/o issues. if you're still hitting it, could you please describe where/how your hitting that 15 character limit?
thanks,
raj

Showing 0 value in vertical bar chart

Similar Messages

Maybe you are looking for