Showing remote device's files on mobile

Actually in my project what I want is that the mobile device will search for the available PC server and PC will share a folder like we normally share a folder on network.I want to show the contents of the shared folder on mobile device,so that user can select any file and copy to mobile device.How I should proceed.Does JSR-75 can show the remote device's files????thank you!

This is not an easy job but is not that hard either.
First of all you have to write two programs: one for the PC and one for the mobile phone. This two programs will communicate via bluetooth.
The J2ME application will have to use JSR-75 for file connection.
When the PC and mobile are connected the j2me application will send a string with the root directory for example. The PC application will display the the root directory(Here you can use swing,swt...). Because on the pc you can use all java power(it doesn't have to be java :D) you can draw the folders how ever you want but you have to put an an event on those(double click for example). In this stage the j2me application waits for requests from the pc program(this two are still connected). On double-click event the pc program sends a request(a string with the folder name) to the j2me application to send the content for the selected folder.
This is only a draft but it's a start. You should draw some sequence diagrams following the steps i described above.
Good luck and regards,
David

Similar Messages

Lines or guides showing up in published files on mobile devices but not on computers

Guides or fine lines are showing up in published files on mobile devices. See http://townmarket.businesscatalyst.com/services.html
Look below the headings Printing Services and Direct Mail Services. This is happening on other pages as well.
Does not show up on computers, just mobile devices.

Here are pics showing lines.

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I made a purchase on iTunes and it is not showing on any of my devices. When I tried to watch the show in my purchased file I could not. When I go back to iTunes it tells me I made the purchase already. Why can't I access my purchases. Case

I made a purchase on iTunes and it is not showing on any of my devices. When I tried to watch the show in my purchased file I could not. When I go back to iTunes it tells me I made the purchase already. Why can't I access my purchases. Case # 506294747

Hi Paul,
If you are having an issue such as this with an item such as a movie purchased from the iTunes store, you may want to report it to the store. Use the steps in this article -
Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
Thanks for using Apple Support Communities.
Best,
Brett L

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

TS1538 I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and myApple Iphone appears in Portable Devices. I tried uninstalling the driver and reinstalling it.

I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and my Apple Iphone appears in Portable Devices only, not in Universal devices. I tried uninstalling the driver and reinstalling it. My Iphone is still not recognized by Itunes when I plug it in. I can see my photos in the internal storage folder on my Windows 7 system though. So I know my PC sees the device. The Iphoneis an Iphone 4 with IOS 6 installed. It was working fine until I had to reinstall my Windows system. Now Itunes does not see it. I've uninstalled Itunes and reinstalled it (64bit) to no avail. Where is the Driver folder article TS1538 talks about?

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device ..

Anyone else have this error when installing Itunes 7.5 or 7.6 upgrade? Help please.
Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\SyncServices\Clients\com.apple.IE\Contents\Resources\Spanish.lproj\Loca lizable.strings. Verify that you have access to that directory.

Just doublechecking something before proceeding. Are you getting a 2330 error message number with that error message, screenpartners?

I have a problem with my apple mobile device support file

Hey guys!
i'm really having a problem with my apple mobile device..
whenever i connect my cable to my computer WITHOUT the apple mobile device support file/program..my ITOUCH can sync and it WORKS!
but ITUNES doesnt sync in with my itouch because ITUNES doesn't work without the apple mobile device support program.. SO...
i reinstalled my ITUNES
i reinstalled my mobile device support file/program
i even changing it to AUTO (what they said about control panal, program, service, thingy)
I RESTARTED everything.. i think i did almost everything there is in apple support!
with NO LUCK! was it able to connect my computer.. UNLESS i take the apple mobile device support program OUT! @.@
i really need your help guys D:
P.S i dont have a Virus! i have a really good computer that is stable, so i'm certain i dont have a virus doing this.. but do you happened to know why it's causing this? Also how can i fix it?
BTW.. IT IS A CODE 52 i don't know what that means..
PLEASE AND THANKS YOU GUYS~ <3

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

I had the same problem. It fixed itself when I opened Internet Explorer (I don't normally use it). I was opening Support Portal to get some support help, but I'm not sure if it was the page or simply opening IE that did the trick.

Error Message "The Remote device or resourse wont accept connection, not set up to accept connection from port https"

I get this error message when trying to open and log into an online casino "The Remote device or resource wont accept connection, not set up to accept connection from port https".
I am on a desktop computer my connection to the net is with a USB Virgin Mobile hotspot device.
I also have issues with some downloads not installing right for instance SKYPE wont work. If the problems are related I don't know
Thanks

Starting in Firefox 14, Firefox will guess an address and place it in the address bar (AutoFill feature). If you have ever connected to the site using a secure (HTTPS) connection, then Firefox will try to connect security to the address suggested by the AutoFill feature. To work around this you can:
* Edit the address to force Firefox to interpret your entry literally. For example, if there is a trailing / you can remove it.
* Turn off the URL bar AutoFill feature and just use the AutoSuggest drop-down.
* Clear Firefox's memory of the site so it doesn't default to a secure connection (however, this also removes any bookmarks you have to pages on the site).
To disable the in-address-bar autofill without losing the suggestions that appear below the bar:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''autofill''' and pause while the list is filtered
(3) Double-click '''browser.urlbar.autoFill''' to toggle it from true to false. You're done with about:config and you can close this tab.
"Forget about this site" will clear cache, history, bookmarks, and permissions for the site, and probably any saved certificate. There are two ways to get to this:
* History > Show All History, right-click an entry for the site > "Forget about this site"
* Type or paste about:permissions in the address bar and press Enter, then select the site from the list on the left side, and click the "Forget about this site" button on the right side
Depending on the size of your history and cache, this may lock Firefox up for a minute or two while everything is cleansed.

I have 3dparty software wirelessly with a cryptographic authentication system without my consent (seems to be new technology developed by stanford) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail break. Now what?

I have 3rd party software wirelessly injected and used on my iphone with a cryptographic authentication system without my consent (seems to be new technology developed by stanford and apple security is not updated for this technology) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail breaking my phone, adding and removing software, changing settings all from a remotely controled device from different location (I have a Mac address I'd of this device to know for sure). Almost undetectable. When I look at the legal section of my phone it shows a list of all the unauthorized 3rd party software "as is" copyright encrypted on the phone. This is the most basic way to legally steal software of any kind. Because of this legalality 3rd party ownership have total control of certain software correlated with hardware use including visualization technology, etc. most people luckily will never have this happen to them so it's unlikely many readers have not a clue of what I'm saying currently. Either way, without needing to obtain specific warranty of any kind "as is" copyright control makes system restores not a solution because the source code is not directly encrypted on the actual hardware device only a copy right notice must appear on the specific device 3rd party software validation making it extremely difficult for me to take control of the situation. Apple claims their iOS technology prevents this type copyright obstruction from being possible, however, according to my phone a new form of technology was used developed by Tom wu of Stanford university called the STANFORD SRP AUTHENTICATION TECHNOLOGY which uses Some form of cryptographic authentication system and uses quote "secure remote password" which seems to suceed in hacking iOS apple technology apple claims is not possible to jailbreak an unstolen phone or without the owners consent As well as loading the device with 3rd party copyright Notices to make all of this legalized. My phone shows atleast 30 pages worth of legalized 3rd party copyright permissions! Yesterday my apple care provider labeled me a jailbreaker and refused to look at my legal documented proof which completely blew my mind because it voides my apple care contract I spent 100 on. This employee did not take all factors into consideration and made quick assumptions as well as verbally speaking to me as I'm an automatic criminal. I left the store yesterday with no payed insurance help on a problem I had no control over and couldn't prevent, leaving with voided contracts. This is an apple users worst nightmare and I have spent days researching all of this like i am some kind of lawyer only to be able to use my phone the way it should and spent alot of money on. I can legally backup any claim I have just wrote above currently and have a large source of data collected to prove apple is wrong in voiding insurance support on this issue. The problem lies in apple avoiding and not wanting to believe their software can legally be obtained ot "hacked". Yet still labeled a jailbreaker basically.. What should I do????? Been to local apple store 3 times and rebooted my phone as well sprint service restore 4 times and spoke with reps twiice on the phone. Spoke with my phone provider who said apple has full control over these matters so they can't help me. My case is according to apple "still open"...Anyone else heard of this or of Stanford's office of technology licensing? Maybe I need to buy a blackberry again or just use a landline so I can stop being my own lawyer and focus on other productive areas in life instead of this horrible mess. I shouldn't have to prove to apple I not a jailbreaker they should have to prove I'm one before voiding support I desperately need!!

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

How can I specify a different css file for mobile browsers?

I'm experimenting with updating our website to be "mobile friendly". I could use some help.
We use a lot of static HTML landing pages for things like links from email ads, etc. What I'm trying to do is have 1 landing page so the content/html page is always the same, but the page will detect what browser/device you are using and then load a different css file depending on what it is. But, we don't want to have to load the style info from the PC version if you're not on a PC.
What I'm doing now is specifying the media type in the css link, like this..
<link rel="stylesheet" href="style.css" type="text/css">
<link rel="stylesheet" media="only screen and (max-device-width: 480px)" href="mobile.css" type="text/css">
What's happening is it's loading the main stylesheet first, and then the 2nd one changes some styles if you're on a device with a max width of 480 pixels (like an iPhone). But since it's loading the PC styles first, it's making some things look screwy.
So, is there a way to say "If you're on a PC, load this stylesheet. If you're on an iPhone, load this one instead." .. without javascript? I don't trust javascript too much on mobile devices. I feel like this some simple little thing that I'm missing that will make it all automagically work.
We don't want to have different content depending on the browser, just different stylesheets. Can anyone help?

Hi
Would it be better to do 2 different stylesheets, or just one big one and add a section at the bottom like:
@media only screen and (max-device-width: 480px) { .styles {whatever: styles;} }
2 separate style sheets are recommended. The reason for this is that the Safari mobile browser, (as used in iPhone etc) will download any/all images specified in a style sheet even if they are not used or specified in a media-query rule, this is a know bug with that browser.
I'm also having a new issue where the style "clear: both;" doesn't seem
to be working right. I set up my top horizontal menu using float: left,
and there's a lot of links so on the smaller screen it wraps, which is
fine but now the wrapped links are floating over the page content...
This is one of the reasons that floats should not be used in style sheets for mobile devices, the only exception I know of is for small typographical feature such as 'pull-quotes', (and never use float: right;). It is also recommended to include a menu at the bottom of the page, (or at least a link back to the top).
It works, if I have the iPhone as portrait it looks great, but if I turn
it to landscape, everything is zoomed in. But if I switch back to
portrait, everything is the right size. Is there any kind of way to get
the landscape to have the normal zoom level? I know I can do
"initial-scale=1.0", but that is just for when the page loads, not if
you change it afterwards...
I have heard of only one recommendation to fix this and that is a page refresh on resize, but due to bandwidth limits now being implemented by many providers it is probably not a good idea, you could try setting -
maximum-scale = 1.0
as well.
PZ

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well?

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.

You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Showing remote device's files on mobile

Similar Messages

Maybe you are looking for