Showing Zero Unit Price/Row Total

Hi,
We currently allow posting rows for item sales with zero unit price. I am having trouble showing the unit price and row total as "$0.00" instead of a blank field with PLD. Both of these fields are system variables (80 and 84), neither field is linked to itself, and neither field has the 'Suppress zeros' box checked. Any possible solution to this? Thank you.

Hi there,
You could try using a formula type field and multiplying your system variable field by 1.
- Say for example your Unit Price field has a Unique ID of F_100.
- Create a new line Formula field and set its value to Round(F_100*1,2).
- This will display your zero value unit price as 0.00.
- Note that I'm only using Round() to display zeros after the decimal place, otherwise the zero value unit price would appear as 0. So change the number of decimals as required.
- Unfortunately this removes the currency code display from the value so you will need to re-display it if required, you can do this using a database type field and selecting the Price Currency field.
Do the same for row total. Hope that helps.
Regards,
Andrew.

Similar Messages

Zero unit price at invent. trans. gd receipt and last purch. price

Hi Expert,
I am wondering why B1(2007) does not update the last purchase price when the good receipt has been done at Inventory > Inventory transaction > Good receipts if the unit price is ZERO?
However, if the non-zero unit price is entered and transaction post, the last purchase price will be updated accordingly.
Thanks

Hi!
That may be the system behaviour !

Sales quotation without unit price & total shows a error invalid total INR

Dear All,
According to my clients requirement,iam creating a sales quotation without unit price and total .
Now when iam copying it to a sales order,it is showing me a error "Invalid Total INR".
I could not understand why and how it is happening.
Can anyone help me out.
Regards,
Meghana

sir,
i tried removing FMS still it is coming.........
The surprise thg is in certain sales quotation without unit price and total there is no such error and it is converted into order, but the issues is wiyth certain old sales quotations.
Regards,
Meghana
Edited by: MEGHSHILPK on Nov 8, 2010 12:11 PM

In RFx comparison, the unit price of un-qouted items shown as ???

Dear All;
We are using SRM7.0.
In RFx response, if we leave the price as zero, the system will display the below message:
Line 0001: '0' in the price field means that you are offering the item for free
Line 0002: '0' in the price field means that you are offering the item for free
Line 0003: '0' in the price field means that you are offering the item for free
therefore, we have to change the submitted qty to zero and keep the price as zero too. By doing so, the system will NOT consider these items as free item. However, in price comaprison details, it shows the unit prices of all these items with zero prices and qty as ???.
Is this the system standard to show the unit price of un-quoted items as "???".
Appreciate your help.

Hi hoasheq
We changed using Message control to force Vendors to put a price while submitting RFx Response.
Cause once a Vendor submitted a price 0 we were not able to create POs out of the winning Bid.
In SRM 4 it used the price we had in ECC to create the PO.
Nikhil

Can't enter unit price in Goods Receipt PO form

Priority: High
Hello Experts,
In GRPO >> form settings, I have checked both the boxes VISIBLE AND ACTIVE. It displays the field on form but does not allow me to modify it.
Help Required...
tha

This is because of the Authorization.
Check if you have 'Full Authorization' in 'Sales - A/R -> Change Row Amounts' in the General Authorization screen.
The following are the authorization for 'Change Row Amounts'
Full Authorization u2013 The user can change prices and amount in the document rows.
No Authorization u2013 The user cannot change item prices, row totals, and so on.
Edited by: Sridharan T on Aug 27, 2008 6:48 PM

How to show unit price total to document level UDF

Hi,
In sales order document I have to show the total of unit price of all items in document level UDF.
Is it possible by using FMS? How?
FMS Query Select SUM($[$38.14.Number]) is not worked for this issue.

Hi Swapnil,
This is the limitation that you cannot bring row level details on document level field.
If you want so then you have to use SDK or you can use Type-->Subtotal option to check the row total.
Regards,
Rahul

Document Settings - Calculate the row total using the unit price

Hi All,
I'm using SAP2007A PL37, the option "Calculate the row total using the unit price" in Document Settings is no longer available. Is there any updates on this issue?
Thank you,

Hi Marlon,
In 2007A, by default, new database would be created without this
checkbox activated.
However, there is a way to bring this checkbox back to the configuration
screen, even if it is a DB newly created in 2007A. In order to do so it
is necessary to do as follows:
1) Open B1 2007A
2) Go to Help -> Support Desk -> Activation Request
3) Copy the ASCII string that appears in the top textbox ("Customer
Request Code").
4) Open a Support ticket stating that you want the "Calculate Row Total
by Unit Price" checkbox activated for the specified system (Copy the
string in the step 2) into a text file and attach it to the message).
5) VERY IMPORTANT: State in the message also the Business Impact leading to this request. In your case you should just say that your AddOn needs this option changed in order to work correctly.
6) You will receive a reply from B1 Support with a number to be entered
in the "SAP Support Code" textbox in Help -> Support Desk -> Activation
Request
7) Click on OK and the checkbox will be displayed thereafter.
Hope this can be helpful.
Best Regards
Helen Sun

Unit price shows discounted value...

I added a Discount column to a quotation page so I can line item discounts, I placed it after the Unit Price. When I add a line item discount it shows the discount value in the Unit Price column. How do I get it to retain the original Unit Price and have it show the discounted price at the end? In addition if there is a 100% discount it shows the obvious zero value. I am not too familier with the PLD so I do not know the correct protocol for setting up a formula, if that is neccessary.
Thanks

At the row level there are 2 columns.
Unit Price
Price After discount
Make sure both these fields are enabled.
Also, in Admin > System init > Document Settings > General Tab ..Calculate the Row total using Unit price ....... should be unchecked

Vendor code in Purchase order changed after invoice,net price showing zero.

Dear Experts ,
In one purchase order , user had done GR & invoice for a line item ( service ),item category "D" , and
thereafter somehow the system allowed user to change the vendor code. The PO line is now having amounts in
the sub-service line items , but net price for the line item is showing as zero. Since the PO was made
directly without any contract/RFQ/PR , there is no reference document or info record shown against the line
item.
In the conditions tab of Item details,the condition for basic price is not seen & since there are no amounts
applicable for the other conditions such as insurance , octroi etc., the NET price shown for the item is
Zero, which is also getting printed in the PO as zero , which is not acceptable , as we can not send to the
vendor PO copy having prices for individual services printed correctly but the total gross price showing
zero.
Pl advise what can be done so that Net Price is shown correctly & not zero.

I think the new vendor is having a different pricing schema than the old vendor. Check the pricing schema for the old vendor (in purchasing view in field 'Schema Group. vendor) and compare it to the new vendor. I think they're different.
If it is then what i think happening is the user already input the price for the condition type in pricing schema A, then the vendor is changed and the new pricing schema is kiciking in thus making the old condition type missing.
Try to either:
A. Change to the old vendor back,
B. Change the pricing schema of the new vendor to be the same with old vendor

Unit price needs to show Euro not GBP Question

Hi,
We have a Goods Receipt PO and the Unit price is showing GBP but the Total (Doc) field is in Euro. We know this is becasue the Unit Price is based on the Price List but how can we change the Unit price to show Euros ie so all the fields show Euros ?
Thank you,

Mathew
The GBP or EURO notation comes from the Price List, so if you change the GBP to EURO, it will show as EURO on all documents that use the Price list.
Robert

Total calculation based on unit price and UDF field values

Hi All,
This is for a construction related company. Please find attached screen shot for details.
My scenario is when we are creating sales order my client wants to calculate the total amount based on unit price towards the UDF fields defined. For example user will give the unit price per sqft in Unit price ie 2800 as per screen shot column and constructed area in Sqft in he will enter the area like cons area in sqft =1500. So this 1500 need to calculate with unit price and will display in total. So in Total field it should show like 2800*1500= result. Like wise other amount values in udf needs to be calculated and displayed in total field .
Is this possible in SAP B1. Please help me with your valuable suggestions.

Hi,
Try this:
SELECT ($[$38.U_Price.number]* $[ORDR.U_CArea.number)+ $[ORDR.U_EBexp.number]+ $[ORDR.U_RO.number]+ $[ORDR.U_Maintenance.number]+ $[ORDR.U_CorpFund.number]
Thanks & Regards,
Nagarajan

Unit Price and Document Total in a Marketing Document

Hi Experts,
I am trying to post a marketing document through the DI API. I have assigned value to the document lines as follows:
                sapDocument.Lines.ItemCode = items.MaterialCode;
                sapDocument.Lines.Quantity = items.Quantity;
                //sapDocument.Lines.Price = items.Price; // tried assigning to both Price and Unit Price
                sapDocument.Lines.UnitPrice = items.Price;
                //sapDocument.Lines.LineTotal = items.LineTotal // Also tried assigning this.
All my documents have been successfully posted in SAP Business One except that there is no Price saved and therefore follows that my Line Total and Document Total are all 0.00.
Hope someone could help me out.
Thanks.
Melvin Balingit

Hello Guys,
So the correct method is
first assign the unitprice, than assign the qty.
Dim oDoc As SAPbobsCOM.Documents = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
        oDoc.CardCode = "C20007"
        oDoc.DocType = BoDocumentTypes.dDocument_Items
        oDoc.DocDueDate = Today
        oDoc.Lines.ItemCode = "A00002"
        oDoc.Lines.Quantity = 2
        oDoc.Lines.UnitPrice = 100
        oDoc.Lines.Add()
        oDoc.Lines.ItemCode = "A00003"
        oDoc.Lines.Quantity = 2
        oDoc.Lines.UnitPrice = 100
        If oDoc.Add <> 0 Then
            MsgBox("Erreur " + oCompany.GetLastErrorDescription())
        Else
            Dim newCode As String = oCompany.GetNewObjectKey()
            MsgBox(newCode)
            AddInvoiceEx(newCode)
        End If
Regards
János

The System permit add line with unit price in zeros

Hello ,
I need colaboratioin in this case, i create ar invoice or ap invoice and the system permit create with lines in zeros into the documents.
Since(As,Like) controlling that it could not create documents with lines in zeros, with whole bigger than zero but one of the lines with price zero
Thanks
Ma.Cristina

Hello Thanga,
Thanks for you help, but in this case the item if has cost, the field in blanck is Unit Price. , the option
Administration > System Initiallization > Comapny Details > Basic Initialization > Uncheck Allow Stock Release Without Item Cost
is disable.

To show Local Currency row total in FC documents

Hi All
is there any possible to show LC row total on the screen when I enter a FC document in SAP B1?
Thanks in advance.
Regards,
Catea k
Edited by: Catea k on Aug 31, 2010 6:55 AM

Hi,
You could use UDF for header level and assigned query formatted search to the udf so that the value in the udf is automatically entered.
You could also use SDK code to display LC total of document beside FC total document. The same solution is applicable for row level of document.
JimM

Showing Zero values in columns and rows in BW report

Hi,
the BW report is showing all rows and columns all Zero's..... so what does it mean till target the data is fine but in the report it is showing 'zero' in all fields.... so let me know the reason...
Regards
vishali

Can you please check the Key figures value? Is it Zero or as per the selection/filter the values are coming "Zero".

Showing Zero Unit Price/Row Total

Similar Messages

Maybe you are looking for