Shutdown NOT due to heat

Whenever I play GTA V on optimal graphics (via GeForce Experience) it powers off after 5-10 minutes and then reboots automatically after another 2-3 mins. It s definitely not an overheating issue, since I know the laptop has been hotter before and I checked the temperatures with coretemp. I suspect it might be a power related problem.
As far as I can recall, it does not happen when I run the game in safe mode, xcept if I then run it on DirectX 10.1 instead of version 11.

Dear Ricu
Welcome in lenovo community
Have you ever noticed the same issue while the machine connected to the charger and without it ?
Let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Mid 2009 macbook pro battery is dead and fan is constantly ramped up (not due to heat). Would installing a new battery fix the fan problem?

Battery icon has an "x" over it and I need to have my laptop plugged in to be on. I've ordered a new battery to install, but I was wondering if it's possible that something else might be causing the fan to be on over drive constantly. I've tried resenting the SMC and the PRAM, but nothing has stopped the fans from running at higher than normal speeds.

If you've updated to Mavericks, you'll either need to use the original install DVD containing the AHT, or download the right one from Apple's servers, then replace the hidden /System/Library/CoreServices.diagnostics folder.
I think that replacing the battery is likely to stop the fan problem anyway.

Has my MacBook Pro melted due to heat?

I have a Unibody MacBook Pro, and near the hinge on one corner of the lid it has this weird bend?
I've never dropped it, so the only way I can imagine that this has happened is through heat - it does get hot there, but I didn't think it could get that hot.
Here's a pic: http://yfrog.com/jmrvfsj
What do you think? Will Apple repair it?

I recently went on a trip and took my MacBook Pro with me. While in the airport waiting to board a plane I decided to play a movie while I waited and to my surprise when I tried to plug in my earbuds from my iPhone into the jack on the left side.. my case was so melted that the plug would no longer fit inside the jack. I began to inspect the case and it was very noticeable that the case has melted due to heat. I have a difficult time believing that this case is made of aluminum. I am also a welder and work with aluminum... the case is warped and curled under, not typical of melting aluminum. I looked further and the left front corner (if closed) of my display is also melted with a divit in the lid and the corner is turning/bending up. My MBP is out of warrantee as I have owned it for almost 2 years now. I called the local Apple store in Huntsville AL and made and appointment to go have it looked at. I have never once dropped or misused this computer or left in in the sun. It has always sat on a marble table top or on my lap. I have noticed in the past that sometimes it gets so hot in my lap that I have to put it back on the table for a while and let the cool marble top heat sink some of the pain away. The gentleman that I spoke with, Vance Hughes... with the supposed title of Genius told me in not so many words to go pound sand. He told me that he has worked in the Apple store for years and has never seen a case melt like that, in that spot. He accused me of setting it on a hot surface because there was nothing in the computer that could produce enough heat to do this type of damage. I assured him that I am an honest guy and I never misused it or set it on anything hot.. He said that the parts could be replaced but it would cost me over $1000.00 and I should take it to an aftermarket computer store to have it worked on. What really ticks me off is 1, he in not so many words called me a liar and 2, would not even consider standing behind the Apple product. I understand when a warrantee is up, normal wear and tear is expected.. but this has got to be a design flaw and it is just a matter of time before the computers that were purchased around the same time as mine (December of 2008) will start showing the same problems. This computer has been plugged in almost since the day it was purchased. Is there any relief to this issue? I would think that Apple would be very interested in why my computer is melting. What if it caught on fire and burned down my house..? Then what? I am going on record here that this is a problem and I hope that no one else experiences the same issue but on the other hand I hope that everyone does so this problem in some sense gets validation.
Respectfully,
MR.

Deformed due to heat?

I brought this macbook for about 2 weeks now and i have noticed that the macbook gets quite hot on the bottom side enclosure. I have noticed that the macbook has deformed due to heat. I can now see the keyboard curve inwards and the lid does not fully close. Is this a warranty issue?

Yes. Take it to an Apple Store and have it looked at.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time

Dear all,
sorry for opening another thread on this.
I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
Is that normal? Is that the performance that everyone else is seeing as well?
I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
(1)
I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
(2)
The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
(3)
The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
(4)
Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
(5)
There is nothing obvious in the logs.
(6)
We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
(7)
I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
(8)
I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
Where do I take it from here?
I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
If it is worth watching more performance counters then I’d need to know what to compare them to.
Is there something else I am missing?
Thanks
Martin

Hi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig | Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold 100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig | Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize 200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/

F150 dunning note prints also not due items

Hello
I want the dunning note to print only the customer overdue items and not all the opent items. Now it prints also items that are not due yet.
Thanks
Ofer

Hi
Check in the dunning settings in FBMP. if you have ticked "print all Items" check box in Dunning levels tab. If this is ticked then it will cover all items.
pushkaraj

Tried to upgrade os4 to os7 but could not due to "find my iphone" still turned on. Could not turn off at that stage so set up as new iphone. Now icloud will only accept past id email address which i no longer have, but itunes on my phone has my correc

Tried to upgrade os4 to os7 but could not due to "find my iphone" still turned on.
Could not turn it off at that stage so set up as new iphone. Now icloud will only accept past id email address and password which i no longer have,
but itunes on my phone has my correct current id and password. I need to restore my back up from itunes, i did not use icloud.
Any help please.
I did try yesterday but did not realise at that time that itunes had correct apple id. Hopefully this is a good thing!

Thank you for your prompt reply.
I have looked at icloud.com/find numerous times and my iPad is not showing at all (see picture below). As I said I did turn off 'Find My iPhone' on my iPad and then erase all settings and data before taking it to the repair centre.
The gentleman at the repair centre said that the device won't restore because "Apple thinks that 'Find My iPhone' is still turned on" (I'm repeating what he said).

I just received my new phone from Verizon, I turned it on and followed direction for set up...now I lost my connection with ATT....How do I get the service back from ATT...not due to change until the 16th

I just received my new 6 from Verizon by mail. I was not due to change carriers til the 16th, but I turned on the new phone and did the set up...now I lost ATT. How do I get the ATT carrier back on my old phone?

I just received my new 6 from Verizon by mail. I was not due to change carriers til the 16th, but I turned on the new phone and did the set up...now I lost ATT. How do I get the ATT carrier back on my old phone?

0.01 price difference local currency amount (not due to forex)

Hi All,
I have this strange system behaviour.
In foreign currency, it has no issue. But when see in local currency, it has price difference which is not due to forex.
The exchange rate used is 7.79594
ithe 4 GR lines in foreign currency
14,006.00
9,870.00
14,194.00
3,948.00
where the total foreign amount is 42,018.00
the 4 GR lines in local currency
109,189.98
76,945.96
110,655.62
30,778.38
where the total calculated by system is 327,569.94
BUT, if you calculate yourself, it should be the below where total is 327569.81.
109189.94
76945.93
110655.57
30778.37
Both amount giving the difference of 0.12. (line item of GRC cannot set off due to difference of 0.12. GR 327,569.94 and IR 327,569.82).
Now, during IR, the foreign amount is same which is 42,018.00 and exchagne rate also the same 7.79594 but the GRC amount is credited 327569.82.
But if you see in PO history in me23n, the amount at IR line is 327569.81.
When I see the document in local currency, it throws out credit of 0.01.
My question is,
1) why during GR, the amount calculated manually and system different by 0.12?
2) why during IR, the local amount with addition of 0.01, which is 327569.82 whereas in PO history in me23n, it is showing 327569.81. Why FI document figure and PO history tab IR line different by 0.01?
Thanks

Hi Calesta,
While the currencies have decimals exceeding 4places, then system would many times dismayed while converting and displaying between the local and the foreign currencies. Pls check if you have defined decimal places for the currencies as per your requirement.
Finally the concern is in the acc doc entries either in MIGO or MIRO. If the difference you are getting is affecting your accounting due to exchange rate differences etc you can configure automatic posting by TE key KDR in OBYC
Regards
Shiva

How to include not due invoices in payment run

Hi Gurus,
Good day.
Kindly advice how we can include invoices that are not due in the payment run to avail discounts.
Thanks in advance.

Hi Ellen,
As a SAP standard, if according to payment terms assigned to a document, has cash discount and the due date is between the payment run date and the next run date, it automatically gets included in the current run date.
SAP also includes documents in the current payment run if the documents become overdue by thenext run date entered in the parameters but not due for the current rundate.
You can do F1 in the Next p/date column to get the SAP help.
Please revert for any clarifications.
Thanks and Regards,
Anit

0FI_AP_4 Not extracting data for items not due

Dear SAP Forum,
Please note when we are trying to pull the 0FIA_P_4 data into SAP BI system, there are certain records like
items not due - records ( in tcode fbl1n) are not populating in the standard DataSource .
I need to display these records in my report.
Please help us on this issue,like how can we pull above records into BI system.
Best Regards,
Padugula Srinivas

Dear SAP Forum,
Please note this is a production issue and need to resolve with in SLA.
Please help us.
Srinivas Padugula

I cannot sit outside for more than 45 minutes without my ipad shutting down due to heat. is there a way to fix this?

i cannot sit outside for more than 45 minutes without my ipad shutting down due to heat. is there a way to fix this?

What model iPad? What is the outside temperature?
When outside what are you doing on the iPad - running a graphic intensive app?
iPad operating ambient temperature: 0° to 35° C (32° to 95° F)
 Cheers, Tom

Ear buds not working. Not due to broken headphones, so it must be the connector in the iPod that is not working.

On my iPod Classic, the right ear bud does not work and the left one spots off and on. The music works fine on a dock, and I know it is not due to broken headphones (a problem I've encountered many times), because they work fine on other iPods, other headphones have the same problem on this iPod, so it must be the connector in the iPod that is not working. Can I fix this myself, do I need to take it in to get it fixed, or do I need a new iPod?

Yes, if you got very steady hands, and you must have the correct tools to open the Ipod. (which is the most difficult part).
For the parts, you can buy off ebay, the audio jack and cable, less than $20 I think.
Those plastic opening tools that they are selling only works for cases that has been opened before, they dont worked for sealed virgin iPod cases.
The screws are quite tiny, so be careful, it might jump out off the window or into the some hole, so better lay white sheets of paper on the floor.
Here is a 4 minute video on how to do it.
http://www.youtube.com/watch?v=ILd9AqzLW60&feature=related

Validation for not due items.

I want to make a validation that when a vendor invoice is cleared and if it is not due (i.e. days in arrears are negative), system should issue a message that the item is not due. I tried with :
pre-req : transaction code=F-53
check : days in arrears < 0
message : error
but it is not working. I dont know whether i have selected the correct message class.
Please guide me.

Hi ,
Please ensure that you have activated the validation through the T code GGB4 .
Secondly , take a trace of the validation and check in which condition is your validation not firing .
Revert back with trance analaysis if stuck up .
Regards ,
Dewang T.

Items Not Due

Hi,
In report how do we determine items which are not due in 0-30 days of keydate using:
net due date, clearing date, posting date, item status and clearing date.
Thank you,
sam

Hi,
Check this link below. You have to create restricted keyfigures as described here.
SAP has provided three variables for this 0P_KEYDT, 0p_KEYD2 and 0P_KEYD3.
For open items select KF debit credit amount
Restrict net due date with 0P_KEYDT and set offset as (0 to -30), and Postingdate should be restricted by less than equal to 0p_KEYD2
For closed items select KF debit credit amount
Restrict net due date with 0P_KEYDT and set offset as (0 to -30), and Postingdate should be restricted by less than equal to 0p_KEYD2
Clearing date should be > 0P_KEYD3.
Add open+ closed items.
http://help.sap.com/saphelp_bw33/helpdata/en/ac/b2ae397f768c3ce10000000a11402f/content.htm
Jaya

Shutdown NOT due to heat

Similar Messages

Maybe you are looking for