SIDs not created when creating hierarchy

Hello experts
I am having a problem with the creation of a hierarchy. The hierarchy is created manually in a z function module. After filling the appropriate parameters, we call the FM RSNDI_SHIE_STRUCTURE_UPDATE3.
The execution of the FM renders the following results :
1. The RSHIEDIR system table is correctly filled.
2. The hierarchies are correctly created under the characteristic in transaction RSA1.
Under the hierarchy tab of the characteristic :
3. The hierarchy table (H table) is filled.
4. The SID table for the hierarchy is empty.
5. The SID structure of the hierarchy is empty.
Moreover the execution does not output any error message or whatsoever at the end.
Following this, our BEX query is incorrect since it cannot find a valid hierarchy.
I have tried looking for other FMs but I'm confused as for their use.
Any suggestion or hint would be the most welcomed.
Thanks.
Regards,
Dimple

Hello,
I think that it´s well worth a try adding the following entry (and at least initially keep your current entry) in BD52:
DEBI - KNA1 - KEY
I have checked both in 4.6B and 4.7 and the original settings in BD52 for DEBMAS were (among others) these two entries:
DEBI - KNA1 - KUNNR (as you already have)
DEBI - KNA1 - KEY
Both for ARTMAS and for CREMAS we have kept the KEY entries for the main tables (MARA/LFA1) in BD52.
If you do try this please advise if it made any difference or not.
Best regards,
Maria

Similar Messages

PSE 8 some photos will not autoimport when creating an photobook and block the whole sequence. Are there knows reasons why individual photos can hang the import? Thanks Michael

When creating photobooks with PSE 8 I find occasionally that certain photos block the autoimport function and none of the sequence are loaded into the new photobook. Using the identical setting to create a photobook other sequences of photos work perfectly. The photos have been checked and found and all are connected and recognised. Are there knows issues with some photo formats which will not autoimport when creating a photobook?
Thanks for the help.
Michael

Sometimes LR can be "nudged" into showing folder relationships which better match the file system, by using the "show parent folder" command. When existing folders appear as if they were "top level" in the drive, we can see a more or less virtual picture of the situation, rather than anything real. So newly added folders can sometimes present themselves as if independent of what is already there.
By forcing LR to show a fuller hierarchy of folders, more attention gets paid to the actual arrangement - so new and existing folders should "wake up" and thereafter appear more reliably in the right relationships.

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11. I can see the tables and views in the database tab, but no stored procedures. If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

Ben thanks for the reply!
Yes that is the process I am following:
In Dreamweaver, open the page that will run the stored procedure.
In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
Enter the ColdFusion Data Source user name and password.
At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated. I need to make sure it is pulling from the correct server but right now it appears to be working.
Thanks
Dwight

Change pointers are not generated when creating a material master

Dear Experts,
Change pointers are not generated when creating a material master.
However, when a change is made to the already created material, the change pointers are created according the fields in BD52.
Am I missing any settings?
I need to create change pointers immediately when I create the material master in MM01.
Please suggest.
Regards,
Shetty

did you follow the steps given in
http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.

Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra

Goods recipient field not available when creating a service purchase req

We are trying to create a release strategy for purchase requisitions with acount assignments K, F and P. The release strategy would use the requisitioner and goods recipient fields to determine the release group. The issue is when creating a purchase req with item category D for any account assignment, the recipient field cannot be populated. It is greyed out. I tried setting the field as mandatory in the IMG at the account assignment level but it doesn't prompt me for a recipient if item category D is entered. Is there a way to allow this field to be populated? I don't care if the value is transferred to the purchase order but I need it populated to determine the appropriate release strategy. We are not using workflow so that is not an option. Any suggestions would be appreciated.

Srinivas, I appreciate the response but the requisitioner field is not the problem. I can set that field to mandatory. The issue is I cannot populate the recipient field that's located on the account assignment tab of the purchase req. The recipient field can be populated if the item category field is blank but as soon as I populate the item category with D for service, the recipient field is unavailable. Is there a way to populate this field when the item category is D?

Partner Role not coming when creating the Vendor Master

Hi all
There is a standrd role AZ.
There is a standrd Partner Determination procedure L1.
The role AZ is assigned to the Partner Determination procedure L1.
When creating the vendor master in MK01 the role is not coming in the list of partner function.
For Document types there is a standard shema 0002.
The role AZ has also been assigned to doc type.
What can be the reason.
Is the assignment against doc type at all required.
Please suggest.
Regards

The procedure for setting partner functions:
Step 1
Vendor Account Group
IMG->LOGISTICS GENERAL->BUSINESS PARTNER->VENDOR->CONTROL ->DEFINE
ACCOUNT GROUPS AND FIELD SELECTION
Step 2
Defining Partner Schemas
IMG->MATERIALS MANAGEMENT->PURCHASING->PARTNER -> DETERMINATION -
>PARNER SETTINGS IN VENDOR MASTER RECORD
->DEFINE PARTNER SCHEMAS
Step 3
Assign Partner Schema
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION->PARTNER
SETTINGS IN VENDOR MASTER RECORD->DEFINE PARTNER SCHEMA
« THEN ASSIGN PARTNER SCHEMA
Step 4
Define Permissible Partner Role Per Account Group
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION -
>PARTNER ROLES ->DEFINE PERMISSION PARTNER ROLES
If you want a partner schema for your own document type then define your partner schema and assign to document type using the below mentioned path.
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER ->DETERMINATION -
>PARTNER SETTINGS IN PURCHASING DOCUMENTS ->DEFINE PERMISSION
PARTNER SCHEMAS
And then
ASSIGN PARTNER SCHEMAS TO DOCUMENT TYPE
Once you have this configuration then you change your vendor in easy access menu (XK02-select partner function) define the partner roles.

User Home Directory not being created when "Create Home Now" button hit...

This is a cross post, since I was not sure where this should end up since it touches two pieces- Open Directory and User Management. Any help would be appreciated!
I am running OS X Server 10.5. All of my user accounts have been migrated over along with their home directories. Problem is that when creating new users and then assiging a home directory the system does not actually create the directory.
Currently all users are setup to have their home directory setup here:
afp://172.16.110.100/Users/'username'. The Users folder has been setup to automount, and all users that have folders can be accessed without issue.
The problem is when I create a new user, select the aft://172.16.110.100/Users option and then select "Create Home Now" button and save as it requests... it does not create the directories.
I have even tried to change the Home patch to make it local to see if it was an network issue, and used the /Users choice and it will not create the directory in that way either- both location go to the same place.
The system was obviously able to create the local admin account and directory admin account home folders without issue when the system was installed.
The permissions for the "Users" folder are as follow:
directory admin = Read and Write
local admin= Read and Write
system user (root)= Read and Write
admin group= Read Only
everyone group= Read Only
The system is in production, so any kind of server resets need to be done after 5pm, so I have not been able to reset AFP service.
Currently the only services running are AFP, SMB and Open Directory.
All users have their entire home directories located on the server, and login over Directory Access on their clients, so all user accounts are stored on the server. No one is having issues accessing their files or logging in.
I just can not create new home directories when I create new accounts.

You do not have to be logged on as the root user to do this. Launch the terminal and type-
sudo createhomedir -a
I run an XServe with Tiger server ( 10.4.11) and this has been the workaround I have been using.
Good luck.

Vendor not intended when create SC using create limit item

Hi All,
This is a challenging issue for all of us...
SRM : 5.0
ECC : 6.0
I am facing the problem when creating the Shopping cart..
When i click on Centralized purchasing -- > Shop -- > Create Limit item
and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created..
If i try to create one more item and specify the Good/service as our custom field value , for this item there are no error and
no message saying Vendor not intended for Purchasing organization..
Please help me in finding out the issue.So that will be greatful to you..
Advanced thanks
Points will be rewarded..
Regards
Raju

Hi Teja,
I agree with you answer..
When i tryo to create SC using the Product which are repliacted from ECC to SRM.. I am able to create SC successfully. That means vendor is properly intended to the Porg and Pgrp right...
When i click on Centralized purchasing -- > Shop -- > Create Limit item
and give the Desc, Product category, Value limit, Expected value, Date between, Supplier and Follow-up actions as Confirmation and Invoice and account assignment as Known and click add to shopping cart..
It is giving a message vendor not intended for purchaing org.. in the Item under Good/Service field value LIMIT is getting created automatically.. I dont understand how it is getting created and Product type is neither a Material nor service.. The product type field vale is blank....
Please help me in finding out the issue.So that will be greatful to you..
REgards
Kumar

Books are not saved when created with iPhoto 09

When creating a book, everything is normal but the book is not saved in the computer. So I have to finish the project and order It. The name of the book is still listed on the left but there's no photos or text. I also have a book that seems corrupted because when i try to open the file iphoto jams and i'm not able to remove the corrupted book because the file can't be opened.
Please help me

Welcome to the Apple Discussions. Sounds like a damaged database file. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
Click to view full size
Also what system and iPhoto versions are you running?
Happy New Year

Message Servers not appearing when creating JCO Destination

Hello Experts,
I had created a System Object in the Portal system landscape based on System Template (Template) and choosed SAP system with load balancing (to connect to R/3 server).
Given parameters to Connector, ITS, WAS and User management, when i test the connection test on these settings, All are successful except the connector settings. but when run the transaction code(System Administration -> support-> portal runtime-> SAP Transaction) by selecting this message server, it is executing.
And i want this message server to be selected when creating JCO destination.
This System Object is not showing in the message servers dropdown box selection when creating the JCO destinations.
What may be the issue.
Could anyone help me in solving this.
Thanks in advance
Regards
Sunil

Hi,
Have you checked the Technical systems in the SLD ? When you click on check sld , you appear an SLD url ,,,
Typing the same URL in browser and loging inwith SLD USER .... have you seen all the technical system which you want to appear while creating the JCO's ..
Regards,
Srini

Why a semi-colon is not enough when creating packages and package bodies?

Hi,
I'm struggling with a quite simple problem - when creating a package header and body in the same script, it does not work as expected. See for example this very simple package:
CREATE OR REPLACE PACKAGE mypackage AS
PROCEDURE test_proc(id INTEGER);
END mypackage;
CREATE OR REPLACE PACKAGE BODY mypackage AS
PROCEDURE test_proc(id INTEGER) IS
BEGIN
NULL;
END test_proc;
END mypackage;
When executed from JDeveloper (or sqlplus), the package is created but with a "PLS-00103: Encountered the symbol CREATE" error. It seems Oracle does not recognize the script contains header and body, and uses the whole script as a header (which is obviously wrong).
If modified so that there are "/" everything works fine:
CREATE OR REPLACE PACKAGE mypackage AS
PROCEDURE test_proc(id INTEGER);
END mypackage;
CREATE OR REPLACE PACKAGE BODY mypackage AS
PROCEDURE test_proc(id INTEGER) IS
BEGIN
NULL;
END test_proc;
END mypackage;
Why is this necessary? Why Oracle does not recognize that "END mypackage;" actually ends package header definition, and combines it with the body definition into an invalid block? I've thought semicolon is a valid separator, so why is the "/" necessary?
It does not work even when I try to run the statements separately (from the same worksheet in Jdeveloper) - first select the header block, hit F9 (execute statement), then repeated the same for body. In this case both header and body are created, but are invalid because the last semicolon is removed from them (so it's not possible to compile them).

For that to work, the SQL engine would have to understand PL/SQL syntax. Only the PL/SQL compiler knows when all the END statements have matched up with their corresponding declarations, and it doesn't do CREATE statements. I guess it could detect that the compilation unit it started has finished and pass any text left over back up to SQL to have another shot at. I'm not sure that's reasonable. There is no other example in SQL where one CREATE statement can turn into two - e.g. you can't send a block of CREATE INDEX statements together and expect the database to parse them out into separate commands.
Edited by: William Robertson on Jun 6, 2009 6:49 PM
Edited by: William Robertson on Jun 6, 2009 6:51 PM
Added example about indexes.

Properties panel (for Content Types) not showing when creating sharepoint based document

Hello,
I've created three Content Types to populate when creating a new Budget document. The problem I'm seeing is that my pc always opens the Budget doc in Word Online and the properties box does not show. When I create a new Budget doc with my test pc, where
it always opens in Word, the properties box does show the three Content Types.
Is the idea of Content Type and the properties window supposed to work in Word Online?
My pc is Win 7, Office 2010 and IE 11
My test pc is Win 8, Office 2013 and IE 10
Thanks

Hi Jimbo, they don't work online. You should change your library settings to open documents in client program.
cameron rautmann

Materialo slip no not updating when creating the transfer posting(MB1B 313)

Hi all
I have a problem in updating material slip no when creating the transfer posting(MB1B 313).
when creating the MB1B if i put the mat slip no manually then system updating in the material doc.
But when system creating the transfer posting(through auto Jobs) the material slip no not updating in the material doc.
this is started to happen only after i deleted the condition records(ZDRL) for printing the doc for a relavent storage location.Kidly let me know is there any relation between ZDRL and the material slip updating.
Thanks
Manju

hi krishan,
Pl ensure that there is any release strategy, or in the transfer posting enter the plant and m.type also storage location in the application tool bar click with reference to PO, and enter the po number and try to proceed. it will work.
Regards,
nagarajan

Design mode not available when creating or opening a php file - CS5

I am not sure if this is a bug or not. When I create a new php file, it opens in code view. The options to view in design or code and design mode are disabled. If I reset the workspace, does not matter which workspace I am in at the time, then the file is displayed in code and design mode but the options to view in design or code and design are disabled.
If I select code view mode, the design view disappears (as expected) but there is no way to get to design or code and design without resetting the workspace.
Is this considered normal operation? The help system does not hint that there is a restriction on view modes for a PHP file.
Thanks
Walter

Hi Walter,
my DW opens always in that mode which I last worked in with a file and then closed DW. Did you already try this (tranlated from German DW):
Preferences> General> Open new document at startup.
Hans-G.

SIDs not created when creating hierarchy

Similar Messages

Maybe you are looking for