Siebel 8.0 MQ Adapter for EAI Integration Workflows through WebSphere MQ

Hello,
IHAC that has Siebel 8.0 set up in a Siebel Server Cluster. They want to develop EAI Integration workflows interacting with a WebSpere MQ. I have seen in the Bookshelf: Transports and Interfaces: Siebel Enterprise Application Integration a note that states "The EAI MQSeries Server Transport can connect only to IBM MQSeries Server software. The
IBM MQSeries server must be running on the same system with your Siebel Server". The client has their Websphere MQ Integration broker in another machine; will they need to install a MQ Client on each of the Siebel Servers within the cluster? I haven't found information about best practices or configuring for such scenario, or even if its the best option for them to go with. Any suggestions or references will be deeply appreciated.
Regards, Wilver

For the benefit of other readers on the matter let me reference the Siebel Bookshelf supplemented reference in the section "About the Siebel EAI MQSeries Transport" there is the following note:
"NOTE: The EAI MQSeries Server Transport Can only connect to IBM MQSeries Server software. The IBM MQSeries Server must be running on the same system as your Siebel Server. Before using the EAI MQSeries Server Transport, You Need to install and configure the IBM MQSeries software. Contact your IBM sales representative for details. "
Info Architecture: "SR 3-1826475241 Siebel EAI MQ Transport Adapter Configuration for WebSphere Remote Queues" It is specified that in order to use the EAI Siebel adapter transport, it requires an IBM WebSphere MQ Server is installed on the same machine. This then is responsible for routing messages to the Q to be defined by GBM.
The current version at BPD (8.0.0.3 SIA 20 416) only supports Static Qs, which requires additional effort in the definition and implementation of routing in the local MQ Server to Siebel. The fix is supported 8.0.0.9 Dynamic Qs, supporting and ReplyToQMgr ReplyToQ methods, which requires MQ Server routing configuration to connect with the remote MQ Server and get the response Q through it.
Other References http://support.oracle.com:
1. Where Can You Install Third Party Software To Use Siebel's MQ and JMS Transports? [ID 473811.1]
2. Does the MQ Queue manager Have to be installed on the Siebel Application server or can it use a remote queue manager? [ID 845103.1]
3. For Websphere MQ Versions Supported Siebel EAI MQ Series Server Transport / EAI JMS Transport [ID 978645.1]
4. Siebel setup with MQ Queue managers in CLUSTER [ID 759972.1]

Similar Messages

  • Rdbms adapter for Weblogic integrator 7.0--Query

    I am trying to configure RDBMS Event adapter (version 7.0 sp2) for Oracle 8i database.
    We have gone through the full cycle of configuration, installation as specified
    in the product
    documentation without any error
    But when we are trying to test the event we are getting a response as "Timed out"
    If anybody has ever encountered similar problems and has been able to successfull
    solve it
    then your suggestions are welcome.

    Which was the event you tried to test?
    If it is timestamp event then the Weblogic server system date and EIS system date
    should be in sync.
    "Narayan Ubrani" <[email protected]> wrote:
    >
    I am trying to configure RDBMS Event adapter (version 7.0 sp2) for Oracle
    8i database.
    We have gone through the full cycle of configuration, installation as
    specified
    in the product
    documentation without any error
    But when we are trying to test the event we are getting a response as
    "Timed out"
    If anybody has ever encountered similar problems and has been able to
    successfull
    solve it
    then your suggestions are welcome.

  • Want to install Siebel CRM in my PC for integrating with UCM.

    I am very familiar with Oracle UCM and trying to integrate with Siebel CRM. I have UCM 11g installed in my PC with Oracle 11g DB and also I know the configuration process or steps from siebel end as well as UCM end. Now I want to install Siebel CRM for this integration.
    I searched in orcale and found that I need the below softawres and also I downloaded it from e-delivery:
    Oracle Base Application (V26510-01_1of2 and V26510-01_2of2)
    Oracle Siebel Image creator(V26511-01)
    Oracle DB11g: OracleXEUniv
    RCU
    What should I do now?
    1. Is the above softwares enough for installation of Siebel ? If yes then can anyone please tell me the installation guide docs.
    2. Should I require more softawre ?
    3. I have also V26699-01_1of6 to V26699-01_6of6 setup files for siebel but I do not know whether I should install from these because I do not have any idea regarding this setup files.
    Regards,
    Santanu

    I think you also need V14496-01 Part 1 of 2 and V14496-01 Part 2 of 2 (English Language Extension Packs).
    Installation is explained in the Bookshelf: V29095-01

  • Oracle Integration Adapter for SAP R/3

    I am working with a customer implementing Oracle EBS Release 12.2.
    The customer has implemented SAP for financial modules and the oracle solution considers an EBS - SAP Integration for Receivables. Does anyone have any experience integrating Oracle EBS Receivables with SAP? Can you give us some guidance regarding EBS - SAP Integration best practices?
    We have found a paper regarding Oracle Integration Adapter for SAP R3. We would like to have some information about what are the Oracle products we can integrate with SAP using Oracle Integration Adapter for SAP R3.
    In case Oracle EBS can integrate with SAP using Oracle Integration Adapter, we would like to know if anyone has experience integrating Oracle EBS Receivables with SAP using Oracle Integration Adapter for SAP R3 for AR transactions and Receipts?
    Any help would be very much appreciated.

    Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
    I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

  • Problems with OracleAS adapter for Siebel

    Hi,
    I have a problem starting the Java data bean connection from the OracleAS Adapter Application Explorer. When I try to connect to my Siebel Instance I get the following error from the application explorer
    Problem Activating adapter. (null). See logs for details.
    When I look in my logs $ORACLE_HOME/adapters/application/config/siebelconnection/logs I get the following information
    Wed, 11 Oct 2006 16:51:28.0188 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    Found adapter 'IWAF'
    Wed, 11 Oct 2006 16:51:28.0204 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    Found adapter 'Siebel'
    Wed, 11 Oct 2006 16:51:28.0219 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [storage] Repository URL 'file:///space/oracle/product/10.1.2.0.2/eaidev1/adapte
    rs/application/config/SiebelConnection/repository.xml' resolved to repositoty ty
    pe: file
    Wed, 11 Oct 2006 16:51:28.0220 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [storage] Getting Repository reference: 'file:///space/oracle/product/10.1.2.0.2
    /eaidev1/adapters/application/config/SiebelConnection/repository.xml&user=null&p
    assword=***'...
    Wed, 11 Oct 2006 16:51:28.0394 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [storage] Created Repository System storage.
    Wed, 11 Oct 2006 16:51:28.0398 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [state] State Repository URL 'file:///space/oracle/product/10.1.2.0.2/eaidev1/ad
    apters/application/config/SiebelConnection/st_repository.xml' repositoty type: f
    ile
    Wed, 11 Oct 2006 16:51:28.0399 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
    [state] Getting Repository reference: 'file:///space/oracle/product/10.1.2.0.2/e
    aidev1/adapters/application/config/SiebelConnection/st_repository.xml&user=null&
    password=***'...
    "aejca_1160581888102.log" 100 lines, 13137 characters
    Wed, 11 Oct 2006 16:51:28.0188 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] Found adapter 'IWAF'
    Wed, 11 Oct 2006 16:51:28.0204 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] Found adapter 'Siebel'
    Wed, 11 Oct 2006 16:51:28.0219 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Repository URL 'file:///space/oracl
    e/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/repository.xml' resolved to repositoty type: file
    Wed, 11 Oct 2006 16:51:28.0220 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Getting Repository reference: 'file
    :///space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/repository.xml&user=null&password=**
    Wed, 11 Oct 2006 16:51:28.0394 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Created Repository System storage.
    Wed, 11 Oct 2006 16:51:28.0398 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] State Repository URL 'file:///space/o
    racle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/st_repository.xml' repositoty type: file
    Wed, 11 Oct 2006 16:51:28.0399 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] Getting Repository reference: 'file:/
    //space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/st_repository.xml&user=null&password=*
    Wed, 11 Oct 2006 16:51:28.0415 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] Created State Repository System stora
    ge.
    Wed, 11 Oct 2006 16:51:28.0449 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Creating IWAF Container classload
    er using libdir '/space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/lib'.
    Wed, 11 Oct 2006 16:51:28.0751 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0752 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Building adapters list...
    Wed, 11 Oct 2006 16:51:28.0753 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0754 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0754 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Adapter: Siebel
    Wed, 11 Oct 2006 16:51:28.0755 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0755 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Inspecting adapter 'Siebel' modul
    es.
    Wed, 11 Oct 2006 16:51:28.0770 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Skiping IWAF Container adapter.
    Wed, 11 Oct 2006 16:51:28.0807 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0808 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Building default security manager
    Wed, 11 Oct 2006 16:51:28.0809 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:28.0811 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] iway.home is set to '/space/oracl
    e/product/10.1.2.0.2/eaidev1/adapters/application'.
    Wed, 11 Oct 2006 16:51:28.0812 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] iway.config is set to 'SiebelConn
    ection'.
    Wed, 11 Oct 2006 16:51:28.0813 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Using default: keystore.type=jks
    and keystore.password=iwaysoftware
    Wed, 11 Oct 2006 16:51:28.0814 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Security manager using keystore :
    /space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/security/keystore.jks
    Wed, 11 Oct 2006 16:51:29.0416 BST - Thread[Thread-5,6,main] [warn ] [IWAF JCA] [container] Security manager will not be avai
    lable due to problem.
    java.lang.IllegalStateException: Problem loading keystore: java.io.EOFException; make sure the password is correct
    at com.iwaysoftware.security.KeyStoreUtil.getKeyStore(KeyStoreUtil.java:39)
    at com.ibi.adapters.util.security.SecurityManagerImpl.<init>(SecurityManagerImpl.java:45)
    at com.iwaysoftware.af.container.IWAFFactory.buildSecurityManager(IWAFFactory.java:209)
    at com.iwaysoftware.af.container.IWAFContainer.start(IWAFContainer.java:169)
    at com.ibi.afjca.spi.IWAFManagedConnectionFactory.getContainer(IWAFManagedConnectionFactory.java:536)
    at com.ibi.afjca.spi.IWAFManagedConnectionFactory.createManagedConnection(IWAFManagedConnectionFactory.java:215)
    at com.ibi.afjca.spi.IWAFConnectionManager.allocateConnection(IWAFConnectionManager.java:35)
    at com.ibi.afjca.cci.IWAFConnectionFactory.getConnection(IWAFConnectionFactory.java:103)
    at com.iwaysoftware.iwae.common.JCATransport.initJCA(JCATransport.java:104)
    at com.iwaysoftware.iwae.common.JCATransport.<init>(JCATransport.java:85)
    at com.iwaysoftware.iwae.common.AdapterClient.<init>(AdapterClient.java:85)
    at com.ibi.bse.ConfigWorker.run(ConfigWorker.java:41)
    at java.lang.Thread.run(Thread.java:595)
    Wed, 11 Oct 2006 16:51:29.0419 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Starting IWAF container managers.
    Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
    Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF AdapterManager starting...
    Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF AdapterManager started.
    Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChannelManager starting...
    Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChannelManager started.
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChainManager starting...
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChainManager started.
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF PortManager starting...
    Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF PortManager started.
    Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] IWAF AEManager start
    ing...
    Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Target ID l
    ist..
    Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0826 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Creating TID for ada
    pter 'Siebel' configuration 'ReutersSiebel'.
    Wed, 11 Oct 2006 16:51:29.0840 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Cr
    eated adapter instance for class'class com.ibi.adapter.siebelaf.SiebelAdapter'.
    Wed, 11 Oct 2006 16:51:29.0892 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0893 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Port list..
    Wed, 11 Oct 2006 16:51:29.0893 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0902 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0902 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Channel lis
    t..
    Wed, 11 Oct 2006 16:51:29.0911 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:29.0945 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [Siebel.channel_ReutersSiebelHTTP
    ] Created adapter instance for class'class com.ibi.http.adapter.HTTPListenerAdapter'.
    Wed, 11 Oct 2006 16:51:29.0955 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Creating channel for
    adapter 'Siebel' configuration 'ReutersSiebelHTTP'.
    Wed, 11 Oct 2006 16:51:29.0992 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] IWAF AEManager start
    ed.
    Wed, 11 Oct 2006 16:51:29.0992 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
    Wed, 11 Oct 2006 16:51:30.0008 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF contained started.
    Wed, 11 Oct 2006 16:51:30.0018 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA IAEAdapter] IWAFManagedConnection for IAEAdapt
    er:null has listener registered: com.ibi.afjca.spi.IWAFConnectionManager@cb754f
    Wed, 11 Oct 2006 16:51:31.0282 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.adapter.siebelaf.SiebelAdapter'.
    Wed, 11 Oct 2006 16:51:31.0289 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.http.adapter.HTTPListenerAdapter'.
    Wed, 11 Oct 2006 16:51:31.0303 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] [com.ibi.mq.MQListenerAda
    pter] init called.
    Wed, 11 Oct 2006 16:51:31.0303 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.mq.MQListenerAdapter'.
    Wed, 11 Oct 2006 16:51:31.0332 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] [com.ibi.file.FileListene
    rAdapter] init called.
    Wed, 11 Oct 2006 16:51:31.0332 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
    apter class 'com.ibi.file.FileListenerAdapter'.
    Wed, 11 Oct 2006 16:51:58.0450 BST - Thread[Thread-7,6,main] [info ] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Cr
    eated adapter instance for class'class com.ibi.adapter.siebelaf.SiebelAdapter'.
    Wed, 11 Oct 2006 16:51:58.0811 BST - Thread[Thread-7,6,main] [error] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Pr
    oblem activating adapter. (null). Check logs for more information
    java.lang.IllegalStateException
    at com.ibi.adapter.siebelaf.SiebelAdapter.activate(SiebelAdapter.java:143)
    at com.iwaysoftware.af.container.adapter.ProxyAdapter.activate(ProxyAdapter.java:104)
    at com.iwaysoftware.af.container.adapter.AdapterConfiguration.activateAdapter(AdapterConfiguration.java:319)
    at com.iwaysoftware.af.container.adapter.AdapterConfiguration.getActivatedAdapter(AdapterConfiguration.java:299)
    at com.iwaysoftware.af.container.AdapterManager.getActivatedAdapter(AdapterManager.java:269)
    at com.iwaysoftware.af.container.IWAFContainer.getActivatedAdapter(IWAFContainer.java:526)
    at com.iwaysoftware.af.container.AEManager.getTargetAdapter(AEManager.java:646)
    at com.iwaysoftware.af.container.ae.AETargetMessage.buildGETTARGET(AETargetMessage.java:255)
    at com.iwaysoftware.af.container.ae.AETargetMessage.build(AETargetMessage.java:84)
    at com.iwaysoftware.af.container.ae.AETargetMessage.<init>(AETargetMessage.java:54)
    at com.iwaysoftware.af.container.AEManager.dispatch(AEManager.java:131)
    at com.iwaysoftware.af.container.IWAFContainer.dispatchAERequest(IWAFContainer.java:612)
    at com.ibi.afjca.cci.IWAFInteraction.execIWAE(IWAFInteraction.java:270)
    at com.ibi.afjca.cci.IWAFInteraction.exec(IWAFInteraction.java:155)
    at com.ibi.afjca.cci.IWAFInteraction.execute(IWAFInteraction.java:93)
    at com.iwaysoftware.iwae.common.JCATransport.execute(JCATransport.java:204)
    at com.iwaysoftware.iwae.common.AdapterClient.getTarget(AdapterClient.java:293)
    at com.ibi.bse.TargetWorker.run(TargetWorker.java:37)
    at java.lang.Thread.run(Thread.java:595)
    My platform is AS 10g (10.1.2.0.2) with Adapters (10.1.2.0.2) on Solaris 10. I am connecting to a Siebel 7.8 instance running on Windows 2000 SP4.
    I would be very grateful of any help you could give.
    Regards,
    Mark.

    Hi,
    There could be couple of possible reasons for this. Please see below:
    1. When you configure a adapter target for Siebel 7.7 or 7.8, do not supply a value for "Siebel Server" field. Please see details related to this in the "Defining a Target to Siebel" section of the Siebel adapter user guide.
    2. If the adapter is installed in the UNIX platform, then necessary encoding should be added to the Application Explorer and the Application Server. Please see the details for this in the "Establishing a Connection (Target) for Siebel" of the Siebel adapter user guide.
    Let me know whether this sorts out the issue or not.
    Regards,
    Kris

  • Procedure for CICS adapter and XI integration?

    Dear All,
    Can you plz provide me the step by step procedure for CICS adapter and XI integration?
    Thanks,
    Srinivas.

    Hi ,
    Check this link..
    http://www.iwaysoftware.com/products/adapters/CICS_IMS_Transaction_Processing.html
    Regards,

  • IWay Adapter for Siebel

    Hi,
       Could you please tell me what are the advantages of using iWay adapter to integrate with Siebel?
       Is it possible to use file or HTTP adapter to send data to Siebel? If yes, then why do we need iway adapter?
       Thanks in advance...
    Regards,
    Vivek.

    Hi Vivek,
    Basically u will have  3 transport protocols in Siebel iWay Adapter like File,MQ,HTTP.You can use any on of the transport protocol basing on the requirement.
    Please see the below threads
    iWAY
    IWAY Adapter(siebel): Error while using Applicaiton Explorer
    Integrating JDEdwards system with XI using IWAY adapter part - I
    Integrating JDEdwards system with XI using IWAY adapter part - III
    Integrating JDEdwards system with XI using IWAY adapter part - II
    XI to mainframe adapter
    B2B Adapters
    step by step procedure to configure a BAAN adapter
    Siebel - http://www-128.ibm.com/developerworks/rational/library/05/419_siebel/index.html
    Push Data to MVC Architectured application using XI
    Invoke Webservices using SAPXI
    Testing XI exposed Web-Services
    Regards,
    Vinod.

  • Adapter for Siebel

    Is there a way that I can browse the data catalog in Siebel from AquaLogic Data Services?
    I am trying to build an application that requires access to Siebel but I do not want to use WLI, WLP or ALUI.
    Any ideas?
    Thanks!

    Look for an iWay adapter for Siebel that can expose it as a webservice

  • Oracle Adapter for SAP that supports Integration with SAP 6.0??

    Hi,
    I am working currently with Oracle Adapter for SAP with SAP 4.6.
    But my company is looking for upgrading the Enterprise SAP system to 6.0.
    Do we have Oracle Adapter for SAP that supports SAP 6.0? Please let me know if anyone has already worked on this?
    Thanks,
    Sasi Bhushan

    Sasi,
    There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
    12.4.1 MySAP ERP Versions and APIs
    The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
    ERP:
    ■ SAP R/3 Enterprise 47x100
    ■ SAP R/3 Enterprise 47x200
    ■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
    ■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
    ■ SAP Java Connector (SAP JCo) Version 2.18.
    For the current release status of the SAP Java Connector, refer to SAP Note #549268
    in the SAP Service Marketplace.
    Release versions may vary by product component. In addition, SAP functions may
    vary by SAP product version and support package.
    Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
    It is not recommended to use the OracleAS Adapter for MySAP ERP with older
    versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
    example SAP R/3 4.6C, prior approval from iWay Software Product Management is
    required.

  • Process Scheduling Adapter for Solution Manager integration

    Hi,
    If we have chargeable CPS version in place, does it offer Process scheduling adapter for free of charge or separate cost involved on it ?
    Thanks,

    If you have the incense version in place that is all you need, you have the full version. Maybe you wanted to ask if you also can install the free of chare  as another instance, yes of course you can maybe if you wnat this as a demo. But is faster/more convenient  for administration to use the full licence otherwise you need to mantain an isolation group per SAP instance.
    Hope this helps
    Juan Jose Alvarado

  • OPA Adapter for PeopleSoft

    Hi All,
    I have created an OPA adapter for PeopleSoft which is purely written in PeopleSoft since its consuming ODS web services. I am also using Oracle XSL Mapper to transform messages.
    Now, I'm thinking of integrating OWD to PeopleSoft. Does anyone have any experience in doing this integration? Can you share some thoughts?
    Regards,
    Jerome

    Jerome wrote:
    Hi All,
    I have created an OPA adapter for PeopleSoft which is purely written in PeopleSoft since its consuming ODS web services. I am also using Oracle XSL Mapper to transform messages.
    Now, I'm thinking of integrating OWD to PeopleSoft. Does anyone have any experience in doing this integration? Can you share some thoughts?
    Regards,
    JeromeJerome,
    You will find integrating with Web Determinations (OWD) has a different set of requirements than integrating with Determinations Server (ODS).
    When Integrating with ODS, PeopleSoft can act as a client, calling ODS and processing the response. When integrating with OWD, you need to think about how data will get sent to OWD (pre-seeding a session) and also sent from OWD back to PeopleSoft when a save call is made (session save).
    The point of integration for this sort of thing for OWD is the DataAdaptor (see Data Adaptor Plugin Overview in the Oracle Policy Automation Developer's Guide http://docs.oracle.com/html/E29403_01/toc.htm). You need be write an implementation that can load and save cases to PeopleSoft.
    The DataAdaptor implementation will need to have a service in PeopleSoft to call to load and save information to. I would suggest that you create a Web Service in PeopleSoft. The DataAdapter can then act as a client to that service to send information.
    This is the basic approach of Web Determinations integration with products like CRM On Demand and Siebel CRM.
    Cheers
    Frank

  • Error in creating AQ Adapter for SYS.ANYDATA Queue  Exception : 1w

    Hi everyone,
    I'm trying to run AQ Adapter wizard for a SYS.ANYDATA type of queue in my composite application with Oracle Mediator. According to the oracle documentation, it is recommended to set SchemaValidation property to false before running this wizard to avoid further validation exceptions. Here is the statement in oracle documentation :
    Note:
    When creating an SOA composite that uses Oracle AQ Adapter with ADT data type if the SchemaValidation property is set to TRUE, then any NULL data type in dequeue message will result in AQ_INVALID_PAYLOAD error further resulting in message rejection. To avoid message rejection, you must set the SchemaValidation property to false.
    [http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_aq.htm|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_aq.htm]
    However, I can't find where should I set this property in my composite project. I can't find any sample of AQ Adapter for SYS.ANYDATA type of queue. I'm getting this exception while creating AQ Adapter partner link:
    "Error while getting Oracle object xml schema definition for queue table xxx_qt Exception :1 "
    "Error while writting wsdl file .... AQIn.wsdl Exception : null "
    The same post I found but no one has answered yet:
    [http://kr.forums.oracle.com/forums/thread.jspa?threadID=664494|http://kr.forums.oracle.com/forums/thread.jspa?threadID=664494]
    I will appreciate if someone can give me a sample on how to use SYS.ANYDATA queue using AQ Adapter.
    Thanks
    Edited by: user3788199 on Aug 29, 2009 1:36 AM
    Edited by: user3788199 on Aug 29, 2009 2:14 AM
    Edited by: user3788199 on Aug 29, 2009 2:17 AM

    I too had this issue, the error message regarding the CONNECT BY is misleading, the XML schema did give me a clue.
    Connect to the Oracle db using the same user as you are using through the AQ Adapter. Do a desc on the message table. This did bring up the columns, however when I clicked on Data on table, I got an error saying it couldn't access underlying data type. I then executed a grant all to object type under the owner of the object type to the AQ Adapter user.
    Came back to BPEL and went through the same steps, but did not get any error on clicking Finish on the Wizard.
    Hope this helps.
    Edited by: user4783399 on Oct 2, 2009 3:54 AM

  • Custom field not found in in the definition of EAI Integration Component

    Hi,
    I added a custom field to Account with integration tag "FirmsOfficesType". I got an error when I'm adding an account:
    Element with XML tag 'FirmsOfficesType' is not found in the definition of EAI Integration Component 'Account'(SBL-EAI-04127)
    Here is the soap message for adding a account:
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
    <s:Header>
    <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" s:mustUnderstand="1">
    <wsse:UsernameToken>
    <wsse:Username>user</wsse:Username>
    <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">passwd</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security>
    </s:Header>
    <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <AccountInsert_Input xmlns="urn:crmondemand/ws/ecbs/account/10/2004">
    <ListOfAccount xmlns="urn:/crmondemand/xml/Account/Data">
    <Account>
    <Status>Active</Status>
    <PrimaryBillToCity>KANSAS CITY</PrimaryBillToCity>
    <PrimaryBillToCountry>USA</PrimaryBillToCountry>
    <PrimaryBillToPostalCode>64150</PrimaryBillToPostalCode>
    <PrimaryBillToState>MO</PrimaryBillToState>
    <PrimaryBillToStreetAddress>1805 ABC ROAD</PrimaryBillToStreetAddress>
    <PrimaryBillToStreetAddress2>STE 300</PrimaryBillToStreetAddress2>
    <ExternalSystemId>OF222652</ExternalSystemId>
    <IntegrationId>OF222652</IntegrationId>
    <Location>OF222652</Location>
    <MainPhone>+1 1235877526</MainPhone>
    <AccountName>ABC Inc</AccountName>
    <AccountType>INDEPENDENT BD A</AccountType>
    <FirmsOfficesType>Branch</FirmsOfficesType>
    <FirmName>ABC SECURITIES CO</FirmName>
    </Account>
    </ListOfAccount>
    </AccountInsert_Input>
    </s:Body>
    </s:Envelope>
    thx

    Hi
    Please go through the related pointers ->
    The OSS note 672960 has already indicated you need to use BADI to address it.
    For Search criteria
    You can also use user-defined fields as search criteria. To do this, you have to set fields XINPUT and XDISPLAY to 'X' in table ET_FIELDS for the fields you want to use in BADI BBP_CUF_BADI_2 in method MODIFY_SCREEN. The fields defined this way are displayed if you choose the 'Extended search' link.
    Re: Custom field in Create Bid Invitation..
    Re: Search Help for Purchasing Group..
    Re: urgent help request - How to add custom fields to  header BID.
    Re: New Screen with table control information in Process Bid Invitation
    Do let me know.
    Regards
    - Atul

  • Using DB Adapter for MS SQL Server 2005  SP in OSB 11g.

    Hi All,
    I have a requirement to create a DB Adapter for MS SQL Server Stored Procedure in JDeveloper and export the Adapter file to OSB 11g. I have Created the Adapter and imported it into OSB 11g successfully. Created the Datasource and Connection pool also in console.
    The problem is while trying to execute the created business Service, I am getting the error as below,
    <Oct 26, 2012 12:20:25 PM IST> <Error> <JCATransport> <BEA-381967> <Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/Test/CheckAppID/WL_Driver/CheckAppId_WL_Driver [ CheckAppId_WL_Driver_ptt::CheckAppId_WL_Driver(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'CheckAppId_WL_Driver' failed due to: Unimplemented string conversion.
    Conversion of JDBC type to String is not supported.
    An attempt was made to convert a Java object to String using an unsupported JDBC type: .
    ; nested exception is:
         BINDING.JCA-11804
    Unimplemented string conversion.
    My XSD is ,
    <element name="InputParameters">
    <complexType>
    <sequence>
    <element name="application_id" type="int" db:index="1" db:type="INT" minOccurs="0" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <element name="OutputParameters">
    <complexType>
    <sequence>
    <element name="RowSet0" type="db:RowSet0_RowSet" db:type="RowSet0" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
    <element name="RowSet1" type="db:RowSet1_RowSet" db:type="RowSet1" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
    </sequence>
    </complexType>
    </element>
    <complexType name="RowSet1_RowSet">
    <sequence>
    <element name="RowSet1_Row" minOccurs="0" maxOccurs="unbounded">
    <complexType>
    <sequence>
    <element name="cde" type="int" db:type="INT" minOccurs="0" nillable="true"/>
    <element name="msg" db:type="NVARCHAR" minOccurs="0" nillable="true">
    <simpleType>
    <restriction base="string">
    <maxLength value="255"/>
    </restriction>
    </simpleType>
    </element>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    <complexType name="RowSet0_RowSet">
    <sequence>
    <element name="RowSet0_Row" minOccurs="0" maxOccurs="unbounded">
    <complexType>
    <sequence>
    <element name="aaa" type="boolean" db:type="BIT" minOccurs="0" nillable="true"/>
    <element name="bbb" db:type="NVARCHAR" minOccurs="0" nillable="true">
    <simpleType>
    <restriction base="string">
    <maxLength value="10"/>
    </restriction>
    </simpleType>
    </element>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    I don't know why there is a datatype conversion error.
    Help me in resolving this.
    Regards,
    Nataraj R.

    Hi,
    I believe NVARCHAR is an unsupported type...
    The following document lists the supported data types for SQL Server stored procedures and functions... NVARCHAR is not in the list... :-(
    http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#CHDEBEEE
    Hope this helps...
    Cheers,
    Vlad

  • Oracle Adapter for MySAP: Error trying to publish RFC as WSLD using J2CA.

    Hi,
    I'm using the "Application Explorer" tool in order to publish a BAPI function as WSLD. I can connect the SAP system, I can access the BAPI function, and when I try to execute "Export Outbound JCA Service (request/response)"... I get nothing but a error trace on the console...
    **Exception occurred during event dispatching:**
    **java.lang.NoClassDefFoundError: com/bea/wli/config/resource/BaseQuery**
    **at com.ibi.bse.gui.ExportIntoWSDLDialog.exportWSDL(ExportIntoWSDLDialog.java:483)**
    Although the error is quite clear:
    1.- I can not find this class in any JAR file in my Oracle Service Bus installation (10.3.0).
    2.- Why is the Application Explorer tool accessing that class? is it right? do I need to make extra-configuration? I just follow all the steps described in "Application Adapter Installation Guide (MySAP ERP, Siebel, PeopleSoft, J.D. Edwards OneWorld) WebLogic Server 10g Release 3 (10.3.1.0)" and "Application Adapter for MySAP ERP User's Guide WebLogic Server 10g Release 3 (10.3.1.0)".
    Regards,
    Antonio.

    The same end-result for What Siva mentioned, can also be accomplished by running setDomainEnv script in command prompt. It would set all the required jars in classpath. In the same prompt use ae.bat. (for eg. in linux it would be . ./setDomainEnv.sh followed by ae.sh in the same bash/prompt)
    I prefer to do something like this in first line of ae.bat if the above method is not possible
    SET CLASSPATH=%CLASSAPTH%;D:\bea\osb103MP1\osb_10.3\lib\sb-kernel-api.jar;D:\bea\osb103MP1\modules\com.bea.common.configfwk_1.2.1.0.jar;D:\bea\osb103MP1\modules\com.bea.core.management.jmx_1.1.0.0.jar;D:\bea\osb103MP1\modules\com.bea.core.management.core_2.3.0.0.jar;D:\bea\osb103MP1\wlserver_10.3\server\lib\weblogic.jar;%CLASSPATH%
    Mostly the problem I see is the version numbers for the jars mentioned by Siva will change from OSB version to version. Can you double check if the version numbers of jars match (eg com.bea.core.management.core_2.3.0.0.jar can be com.bea.core.management.core_2.3.x.y.jar in your installation.)
    Let me know if you still have the same issue.
    Manoj
    Edited by: mneelapu on Nov 23, 2009 12:06 PM
    Edited by: mneelapu on Nov 23, 2009 12:08 PM

Maybe you are looking for

  • Mandatory field FOR SOME PLANTS - batch management - MARC-XCHPF

    I know you can force material master fields to be mandatory in SAP.  I am not positive that you can force batch management MARC-XCHPF for some of your plants but not all? plant A - field does not exist plant B-C - field exists and should always be ch

  • NOARCHIVELOG - lost datafile

    We have a situation here. We lost the datafile associated with UNDOTBS and we are in NOARCHIVELOG mode. The option seems to be to use .....OFFLINE DROP and then drop the tablespace. Accordingly, dropped the tablespace and attempting to open the datab

  • IPC on CRM 5.0, SAP_AP 700

    Hi All, I have an installation of CRM 5.0 with SAP_AP 700 and have successfully enabled the VMC. I will need IPC because we are building an e-selling scenario. But I have not found a guide for this version of IPC (which has now been integrated). So m

  • Availaibility of EJB3 support in JDeveloper 10g

    Hi, I found online demos such as this one http://www.oracle.com/technology/products/jdev/101/viewlets/101/ejb30entitybeanviewlet_viewlet_swf.htm impressive. Excactly what I need ! I'd love to test it in real life but I can not access the EJB3 related

  • Brazilian iPad 2 In Germany

    Hi, I bought my iPad 2 in Brazil, but now I can't find a place in Germany where to afford a 3G simcard that fits in it. Can anybody help me, please =)