SignalExpress Tektronix Edition with TDS2014C

I have the full version of SignalExpress Tektronix Edition to use with a Tektronix TDS2014C 4-channel scope.  Unfortunately SignalExpress will only show me Channel 1 and Channel 2.  I have yet to figure out how to get it to display Channels 3 and 4.  Below are the steps I take:
Add Step -> Tektronix -> Acquire Signals -> Tek TDS1000/2000
The image below is what SignalExpress gives me.  Any suggestions?

Hi Viper32,
Here is a link to the lates version of the driver. Install it and see if this helps the issue. It was updated in 2008.
Regards,
Perry S.
Applications Engineer
National Instruments

Similar Messages

  • What kind of FIR filter in Labview SignalExpress Tektronix Edition?

    I am using FIR filter in Labview SignalExpress Tektronix Edition to process signal acquired from the TDS3032B.But i dont know what kind of this filter(Window,least-squares,or equiripple...).Does any one know about this?

    Check out some of NIs links:
    Virtual Instrumentation Empowers Digital Signal Processing Design
    http://zone.ni.com/devzone/cda/tut/p/id/4759
    Designing Filters Using the NI LabVIEW Digital Filter Design Toolkit
    http://zone.ni.com/devzone/cda/tut/p/id/3237
    lots of information about different FIR can be found by searching on google as well.
    National Instruments

  • Tektronix edition - Log import

    Hi all,
    I've got a problem, which I can't solve on my own, so I'm asking your help.
    I've got the softwareprogram: SignalExpress Tektronix edition v2.5.1
    Now in this program you got the option to record your measurements, wonderful!
    But I accidentely deleted one of my files and I can't remeasure it anymore.
    What happend: I pressed on the delete button for a couple of file (one to much..) and removed them from the project (left on the disk).
    Now I wan't to get back one of those files, but it just won't work...
    When I try to import the file like: "Logged Signals From Another Project" then it just won't see any file so I tried the other option:
    "Logged Signals from SignalExpress TDMS Files…" (see: http://digital.ni.com/public.nsf/allkb/40499FC78C039BC386257944004D4450).
    I can see the files now, but still can't load them into my project.
    I'm getting an error: "You cannot choose this folder name; a file of that name already exists" then (see figure)
    But there aren't any log files named like that. even tried with a blank project, still same result.
    How to fix this? because I really need that data.
    Kind regards,
    Dennis1001.
    Solved!
    Go to Solution.
    Attachments:
    probleem logfiles.PNG ‏50 KB

    Hello Dennis,
    It seems like you selected a specific file instead of a folder.
    In the pop-up message they mention:
    "Choose a folder that contains tdms file"
    So when you're in the right folder, you should choose/click "Current Folder" instead of selecting a specific tdms-file.
    Can you try this?
    Kind Regards,
    Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
    CLD, CTA
    If someone helped you, let them know. Mark as solved and/or give a kudo.

  • SignalExpress Tektronix license manager

    I'm still the site administrator for LabVIEW SignalExpress Tektronix Edition licenses (used by the Tektronix sales force to sell SignalExpress TE) and I still have the same computer, but IT is about to move me from XP to Win7. Will the same license manager software still work, or am I going to need an upgrade? A new license for the license manager?
    Solved!
    Go to Solution.

    Hello scottdavidson,
    What version of Volume License Manager are you using? Are you upgrading the server OS or client OS? If you are just upgrading client machines, you need to install your software on the new OS and point it at the server.
    Regards,
    Applications Engineer | National Instruments

  • Editing with Photoshop Elements 4.0

    I'm sure the problem and solution are simple, but I'm missing something. Here goes.
    I'm using iPhoto 6.0.2. Just installed and started using Adobe Photoshop Elements 4.0. Have been editing about 1,100 photos from a recent trip to Africa, which were imported from my Canon. Wanted more editing tools, so stopped editing with iPhoto and started using PS Elements. So I open a photo from the iPhoto library using PS Elements. Let's say I open a photo from Roll 100, and call it the Monkey Photo. I edit the Monkey Photo in PS Elements, and then save (not save as, but save, using the same Monkey Photo file name). It saves the photo, but not back into Roll 100, but into a new Roll created somehow by the operating system, let's call it Roll 110, found in both the Originals and Modified folders (which seems odd).
    Just like importing directly into iPhoto, when I save from PS Elements, a thumbnail is created, called a Preview. So now I have two thumbnails/previews, one from the original photo and one from the PS edited version.
    So now I go to the Africa album in iPhoto. I double click on the thumbnail on the main screen to open Monkey Photo and I see a big gray blob with a large exclamation point in the middle. I go to the iPhoto library folders, and see that Monkey Photo is no longer in Roll 100, but now in Roll 110. But somehow iPhoto is not recognizing Monkey Photo in Roll 110 (and it's no longer in Roll 100, so as far as iPhoto is concerned, it doesn't exist...but it does).
    So back to iPhoto. I click on View and switch to Roll view. Now I see Roll 100 and Roll 110. I click on Monkey Photo thumbnail in Roll 100, big gray blob, but click on Monkey Photo preview in Roll 110, and now I see Monkey Photo, in all his/her wonderfully edited colors from PS Elements.
    How do I get the thumbnail in the iPhoto Library and the Africa album to work to recognize that Monkey Photo is now in a new roll? I did the rebuild stuff (control-option on opening iPhoto, click on first three choices, wait 30 minutes....nothing happened). I noticed the ColorSync profile was missing, and reinstalled it. Still the big gray blob following thumbnail clicking. I did a war dance. Still nothing.
    What am I missing here? If you tell me that I have to recreate the Library, then the next noise you hear will be iPhoto disc being used as a frisbee and smashing into the neighbor's window.

    Robert:L
    Are you accessing that file from the Finder to open in PSE or are you using iPhoto's preferences to use PSE when you double click a thumbnail? The latter is the way it should be done. Then as long as you do not create a layered or otherwise edited file that required the psd extension nor change the file name, iPhoto will recognize the edit update the thumbnail accordingly. If you access those files from the Finder, open in PSE, edit and save, the thumbnail will not be updated but when you go to the edit mode you'll see the edits.
    Go to iPhoto's preferences and under the General section select PSE under the Open photo with: menu.

  • Anyone using ms sqlserver standard edition with XI 3.0

    wondering if anyone is successfully using ms sqlserver standard edition (not enterprise edition) with XI 3.0. I would like to set up a dev/test XI system and the standard sqlserver edition is less expensive than enterprise edition. I would like to confirm that it works ok first.
    thanks-

    Henry,
    I haven't tried but I think it will be successful with mssql server standard edition also. The following link gives the key difference between standard and enterprise edition.
    http://www.databasejournal.com/img/RS_servereditions_code.html
    Best of luck!
    regards,
    Felix

  • To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

    Dear Sir,
    Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
    2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
    Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
    Thanks

    Hi,
    1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
    2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
    3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself).  If you want you may configure these two settings via group policy setting instead.  The path of the
    group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
    5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
    -TP

  • Unable to edit document using "Edit with Word" option

    Hi All,
    i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
    i am able to open documents in browser
    i am able to edit document using " edit with word/excel web" option
    but i am unable to edit document using "edit with word/excel" option
    i have Office 2010 installed on my local machine.
    do we need to have MS office of 2013 version? or is there anything missing from configuration part.
    Please help me.
    Thank You,
    Bhaskar.

    Hi,
    According to your post, my understanding is that you could not use the "edit with word/excel" option.
    I had tested the issue with the Office 2010, the option worked well.
    You don’t need to install the Office 2013 to use this option.
    What did you mean “but i am unable to edit document using "edit with word/excel" option
    Did you mean the option gray out? Did the issue occur in other browsers?
    You can use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    You can also add the site into Trusted sites.
    Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
    What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Questions about editing with io HD or Kona 3 cards

    My production company is switching from Avid to Final Cut Pro. I have a few editing system questions (not ingesting and outputting, just questions about systems for the actual editors - we will have mac pros with either kona 3 or io HD for ingest and outputs)
    1) Our editors work from home so they most likely will be using MacBook Pros - Intel Core 2 Duo 2.6GHz 4GB computers with eSata drives to work on uncompressed HD, will they be able to work more quickly in FCP if they are using the new Mac Pro 8-Core (2 Quad-Core 2.8GHz Intel Xeon) or will the mac book pro's be able to hold their own with editing hour long documentaries, uncompressed HD
    2) Will having an AJA Kona 3 (if we get the editors mac pros) or io HD (for the mac book pros) connected be a significant help to the editor's and their process, will it speed up their work, will it allow them to edit sequences without having to render clips of different formats? Or will they be just as well off without editing with the io HD?
    I'm just trying to get a better understanding of the necessity of the AJA hardware in terms of working with the editors to help them do what they have to do with projects that have been shot on many formats- DVCPro tapes, Aiptek cameras that create QTs and P2 footage.
    Thanks

    1. with the IoHD, laptops become OK working with ProRes and simply eSata setups. Without the Io, they can't view externally on a video monitor (a must in my book). It will not speed up rendering a ton, nor will it save renders of mixed formats. The idea is to get all source footage to ProRes with the Io, and then the Io also lifts the CPU from having to convert ProRes to something you can monitor externally on a video monitor, and record back to any tape format you want... all in real time.
    2. Kona 3's on Towers would run circles around render times on a Laptop... no matter what the codec, but the Kona does not really speed renders up. That's a function of the CPU and just how fast is it. (lots of CPU's at faster speeds will speed up render times).
    I'd recommend you capture to ProRes with Io's or the Kona 3 and don't work in uncompressed HD. You gain nothing doing it quality wise at all. And you only use up a ton of disk space (6 times the size in fact) capturing and working in uncompressed HD, which from your post, you're not shooting anyway. The lovely thing about ProRes is that it's visually lossless, efficient, and speeds up the editing process. Mixing formats can be done, but it's better to go to ProRes for all source footage, and edit that way.
    With either the Kona or the Io, you then can output to uncompressed HD tape... that's what they do for you no matter what codec you've edited in. ProRes is designed to be the codec of choice for all HD projects when you're shooting different formats especially... Get them all singing the same tune in your editing stations, and you'll be a much happier camper. Only reason to buy laptops is portability... otherwise you're much better off with towers and the Kona 3 speed wise.
    Jerry
    Message was edited by: Jerry Hofmann

  • Iphoto Editing with Photoshop Elements 9

    I am going into Iphoto, clicking the Edit button and it brings up Photoshop Elements 9.  I make changes, they
    look OK so I save it.  When I get back to IPhoto, it looks like the change has been made.  However when I go
    back later in the day and click on the updated photo and there is a triangle with an exclamation point in the middle.
    This means it can't find the original.  They're all located in Iphoto, what is happening?  Why does it look like the changes
    are make and then I can't find them?

    I do use a Mac, so I don¹t think versions is an issue. I would rather
    pictures edited in PSE, which began life in iPhoto, should always be saved
    back to iPhoto, as they were in Elements 8. That is not happening. Neither
    do I know where to find pictures that PSE has saved.
    From: "Barbara B." <[email protected]>
    Reply-To: <[email protected]>
    Date: Sun, 21 Aug 2011 15:05:25 -0600
    To: Warren Newman <[email protected]>
    Subject: Iphoto Editing with Photoshop Elements 9
    >> The save dialog sees an original and asks for permission to change it.
    If you see the save as dialog you don't have your saving files preference set
    correctly. To make versions, you must set it to Save over Original.
    However, note that there is a big ol' bug in the mac version that if you even
    open that particular preference window (even if you don't change anything
    there) PSE will no longer add file extensions when you save. When using PSE as
    external editor it doesn't matter so much, but if you ever save to the desktop
    you will need to add the file extension manually to the saved file.
    >

  • Which of these laptops to buy for editing with premiere pro

    Hello guys,
    I am looking for a new laptop to replace my dead beloved desktop L
    I will be editing mainly with Adobe Premiere CS6 and After Effects CS6 and do some graphic works (PS,ILL…)
    After a long research the choice was narrowed to the options mentioned bellow. Which one do you recommend ? Is there any other option in the same price range that I did not consider?
    P.S. Please pay attention to the Hard disk variations!!! Would that make a great difference in editing?
    Thank you in advance J
    ASUS N550JV-CM160P
    Intel Core i7-4700HQ (6M Cache, up to 3.40 GHz),
    16GB DDR3L 1600 MHz,
    750 GB SATA 7200 rpm,
    NVIDIA GeForce GT 750M 4096 MB DDR3,
    39.624 cm (15.6 ") 16:9 IPS FHD (1920x1080) LED Backlight,
    Super-Multi DVD DL,
    10/100/1000 Base T, 802.11 b/g/n,
    Bluetooth 4.0,
    Windows 8 Pro
    LENOVO IDEAPAD Y510P
    Intel Core i7-4700HQ (6M Cache, up to 3.40 GHz),
    16GB DDR3L 1600 MHz,
    256 GB Solid State Disc
    2x NVIDIA Geforce GT 750M, 2048 MB GDDR5 VRAM
    39.624 cm (15.6 ") 16:9 IPS FHD (1920x1080) LED Backlight,
    Windows 8 64 Bit
    OR   same Lenovo with 1024 GB 5400rpm AND 24 GB Solid State Disc!!!!

    Sadnakhleh wrote:
    That is a 17" right? I am going to buy a 15" I think.
    The biggest problem with the Asus in question is that it will be really hard to upgrade it and I still did not find a model with SSD.
    I found a comparision review here:  http://www.notebookcheck.net/Review-Asus-N550JV-CN201H-Notebook.98311. 0.html 
    The Asus scores better in the cinebench sector (slightly with OpenGL and much with CPU)  and the Lenovo is better in the Pcmark7 and the 3dmark11. What are these tests? and which one is more important when it comes to video editing?
    Thank you again for your time and efferts
    P.S. I am studying the article about Hard disks, it is really interesting!!! thanks
    Correct it is a 17-inch, and of course it weighs and costs slightly more than a 15.6-inch
    It is a very simple task to upgrade the unit to an dual SSD system, and memory upgrade is very easy.  You undo one screw on the bottom and (below) this is what you see.  Two disk drive carriers with my SSD's installed and two 8 GB SODIMM add on RAM modules
    Those benchmarks have very little to do with editing with Premiere, there is only one real comperhensive Premiere benchmark it is our PPBM.

  • Aperture - Edit with External Editor - Photoshop

    Hi,
    I recently made my first attempt via Aperture to "Edit with External Editor" and in my case I have the preferences set to export to Photoshop CS4 Extended. The External Editor File Format (in preferences) selected is TIFF and as advised by Apple's Help menu this is set at 16-bit. The External Editor Color Spaces is set to Adobe-RGB (1998).
    I selected an image with some barrel distortion, hit the export button, and Aperture sent the new master to Photoshop. I did my fixing and saved. This automatically sends the updated file to Aperture. This is very handy and practical but I was shocked to see the size of the new and fixed file. The original file was a JPEG at 4MB and the new fixed file was a colossal 200+ MB file. I ended up throwing away the new file - too large.
    I am just wondering if this is normal? This is my first time using the Edit with External Editor in Aperture and I am also quite clueless about using Photoshop efficiently and properly. Could I have done something differently and received the new and fixed file at a smaller size?
    Thanks for your advice and help.
    Chau

    Chau wrote:
    I am just wondering if this is normal? This is my first time using the Edit with External Editor in Aperture and I am also quite clueless about using Photoshop efficiently and properly. Could I have done something differently and received the new and fixed file at a smaller size?
    This is normal.
    TIFF files get rather large and the 200 MB sounds about right. If I send a 1.63 MB JPEG at the same settings in PS CS5, I get a 134 MB TIFF after applying the Lens Correction filter and saving.
    If I send the same file as a TIFF 8-bit in Adobe-RGB (1998), I get back a 54.73 MB file.
    You could therefore send as an 8-bit TIFF to reduce the size. Additionally, the PSD format tends to return a slightly smaller file size (51.xx MB in the case here).
    A JPEG file is actually only an 8-bit file, so it isn't really necessary to go to 16-bit, but many users like to protect against further degradation of the JPEG when editing externally (especially from posterization where smooth gradients - such as a sky - start to break down into visible steps in the color transition).
    I personally send as TIFF 8-bit in the sRGB color space and if the image shows degradation, then I might change to the TIFF 16-bit (or simply not use that image).

  • Finding photos and editing with Photoshop

    to locate a photo in iPhoto library I use Spotlight to search for it - why doesn't iPhoto show in the info window the path to the selected photo? Is there a quick way to locate a particular photo in iPhoto library?

    Terence,
    You set up PS to be the external editor in iPhoto's preferences.
    Once you set up PS there, you can control click on an image in the library and choose any of the editing options: edit, edit in window, edit in full screen, edit with PS.
    If you edit with PS make sure to "save" the image with the same file name and flattened. Do not "save as" unless you want to save a layered file with a different name to a location other than the iPhoto Library.

  • Editing with photoshop elements my copy photo colors change

    When I have a photo open in Aperture and I select "edit with Photo Shop Elements", Aperture makes a copy of my photo as it is opening up PSE9.  The copy photo changes.  I can look at the histogram and see they are different.  Why isn't this copy EXACTLY the same?  

    The file format of the newly created file (it becomes a Master) is set in Aperture Prefs.  Is it different than the file format of the existing Master?  Is there any chance the change in file format accounts for the difference you are seeing?

  • Can't Access Supplementary Editing with Photoshop CS2

    I was a user of Elements3 for a long time mainly because I liked that the catalog's "edit with" feature worked with Photoshop CS2.  I recently got a new PC with Windows 7 so I could not install PSE 3. I downloaded PSE9 trial version to see if all worked well and it was worth the purchase.  The problem I am having is that I cannot seem to get my Photoshop (CS2) as a supplementary editing option.  When I try it tells me this
    But if I don't add it like it says, there is not a Photoshop option when I go to the "edit with" list.
    I don't know if this is right, but from the little bit of research I did it thinks I am trying to add Elements again because the Elements program exe file starts with "Photoshop" so when it reads the Photoshop.exe file it thinks it is a duplicate.  I tried creating a copy and renaming the Photoshop.exe file which almost worked.  Elements allowed me to select it as a supplementary editor and afterwards Photoshop was an edit option.  I tried to edit a photo with it and while the program opened, it then got an error message and ended up closing before the photo came up for editing.
    Can someone give me a fix to use Photoshop as my editor.  I really liked how I could edit in PS and keep a neat catalog of edited versions with the Elements versioning capability.  If I can't do it I probably won't end up purchasing the PSE9 program.

    I have the identical problem trying to use Photoshop as the editor from Photoshop Elements 11.
    Please can some-one let us in on the secret of how to get PSE to recognise that a full Photoshop is installed.
    Thanks
    Dave

Maybe you are looking for