Significance of OD when group is rolled up

My terms might be a bit off, as I'm a Primavera rookie,
but what is the significance of the OD value when a group
of activities is rolled up with all activities 100%
complete within the group? I can't seem to find any
relationship between the actual data that has been rolled
up and the value that is displayed in the OD column once
rolled up. This question was brought up in a meeting and I
was not able to provide a solid explanation. Thanks!

If the activities are 100 percent completed, and when
we rolled up for summaries, the original duration is
calculated as (The difference between the actual start
date and the actual finish date; the remaining
duration becomes zero) that's it..
Hope you
have got the right answer for what you were looking...

Similar Messages

How do I make a textbox appear in a PDF made in InDesign CC when the cursor rolls over another textbox?

I'm trying to make a textbox appear in a PDF made in InDesign when the user rolls the cursor over another textbox, and I want it to disappear when the cursor moves off the first textbox. I've tried the following with various setting, and it's just not working for me.
Display a different button on rollover
You can create a hot spot in which clicking or mousing over an object displays another object. To do this, create two buttons, hide one of the buttons, and use the Show/Hide Button action to show and hide the target button.
Create an object to be used as the source button. In the Buttons panel, click the Convert Object To A Button icon.
Place the image you want to be used as the target button, and convert it to a button.
Select the target image and select Hidden Until Triggered at the bottom of the Buttons panel.
The image needs to be hidden in the exported document so that it can be displayed when the source button is moused over or clicked.
Select the source button and create two different actions, one to show the target image and a second to hide the target image.
If you want the image to appear when the mouse hovers over the source button, use the On Roll Over and On Roll Off events. If you want the image to appear when you click the source button and disappear when you release it, use the On Click and On Release events. In either case, use the Show/Hide Buttons action to display and hide the target button. See Make buttons interactive.
Use the Preview panel to test the buttons.

Here's more information about what I'm doing.
1. create text box with a little text
2. turn it into a button (Button 1)
3. create another text box with some text
4. turn this into a button (Button 2)
5. check "Hidden Until Triggered" for Button 2
6. For Button 1, select "On Roll Over" for Event
7. For Button 1, click + to add Action and choose "Show/Hide Buttons and Forms"
8. For Button 1, change icon next to Button 2 into eyeball (which I assume makes Button 2 visible on roll over).
9. For Button 1,, select "On Roll Off" for Event
7. For Button 1, click + to add Action and choose "Show/Hide Buttons and Forms"
8. For Button 1, change icon next to Button 2 into crossed-out eyeball (which I assume makes Button 2 invisible on roll off).
8. Export to PDF with modified smallest file size and include bookmarks and hyperlinks and include appearance for interactive elements.
Both buttons are visible in the PDF, and nothing happens with roll over and off.
What am I doing wrong?

Saving a book as PDF takes significantly more time when the file binary *.fm rater than *.mif?

Is it possible, that saving a book (with FrameMaker 10) as PDF takes significantly more time when the file is formatted in the binary *.fm rather than the *.mif format?
We have books (+160p) that take about 20 min to be saved as PDF, whereas the same book in MIF format can be saved as PDF within about 4 minutes. Is this a known issue?
Or could that be a problem with our books?
Does anyone know how to speed up the process (how to tweak) or are there any special adjustments in the books or documents that might slowdown the process of saving them as PDF?
The distiller seems not to be the problem. The distiller takes equally long for both formats.
best regards

Strikes me as peculiar. I would expect that FM is rendering from the data structures in memory, which I would expect to be essentially identical whether originally opened as .fm or .mif.
If return-to-UI time is important, the fastest path is:
print to local .ps file
Distill separately.
And it sounds like you have the full Acrobat product, and thus have full Distiller.
I don't have sufficient experience with Print-to-PDF vs. Save-as-PDF to opine on potential time differences for those paths.

Help,Layers changing position when grouped.

I imported a layered JPEG image from Photoshop into Motion 3 (each layer together made up a single image)
When trying to group some of the layers in motion, the grouped layers alter their position (i.e appear dislodged from the single image.)
Is there a way i can group layers together without changing their position?
I've tried holding the Cmd key when grouping (as suggested in the release notes) but that did not work.

Hi Andy
Sorry for the late reply.
What I’m trying to do is to import an image that I cut up into layers Photoshop (like a jigsaw puzzle) and then import that layered Photoshop file into motion.
The goal is to hopefully create a smashed pane of glass effect, with the image. (you know.. “smash” the image into the created pieces (layers) and have them fly towards the viewer, then reverse animated media so that it forms one image again)
I got as far as importing the picture as a whole into motion with all the layers creating what looks like a single image. But as soon as I group a number of the layers that form the image together, those grouped layers become dislodged from the whole picture.
I’m going to try playing with the anchor points as you suggested, and hopeful it may fix it.

Pswsync fails when groups sync fails

pswsync fails to retrieve remote id when groups sync fails
Resync fails when I enable group sync.
I can't succeed to resync
as soon as I disable the group sync, everything comes OK again
It could be mapped to http://forums.sun.com/thread.jspa?messageID=10153191
or to Bug ID: 6572575
For the group synchronization to work successfully during resync, both the user and group should reside at the same level in the synchronization scope. Otherwise, it displays an error.
But the AD's DIT exists and can't be altered. Groupos and people are in different branches that is a common design as soon as you leave the default "put all in CN=USERS"
Is there a workaround?

6230i is rather old phone, so if you had a version of pc suite that worked with it, try to find it and use that,maybe the newest pc suite no longer supports well 6230i (altough I have seen it in the forum here that it does work. You have something special in your setup that prevents it from working but difficult to guess what.
And if you like to get official Nokia support, contac NOkia care, this is end user forum, you will not get official Nokia help from here.

Difference between group by roll up and group by cube

Please let me know with an example for the difference between group by roll up and group by cube.
thanks,
Vinodh

http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/aggreg.htm#sthref1601

"Error when grouping on werks"

Hello,
When i tried to run one custom program i got an error message with the following message "Error when grouping on werks". Pl. suggest what could be the possible problem.

Hi ..
PFB the message no.
Message no. 00368
Thanks.
RK

Group Currency Roll-Forward

Hello,
I seem to be having an issue rolling by 2006 balances forward. I have been using transaction F.16 to carry them forward and FS10 to verify. Everything looks fine in the local currency view in FS10 but when I look at the group currency balance it has not rolled forward. Any ideas on why this may be happening would be greatly appreciated.
Thanks.

Wrong Forum

Why must I upgrade RIGHT NOW or quit CC when an update rolls out?

After the umteenth iteration of this, I'm growing very tired of being FORCED to update my creative cloud manager every single time an update rolls out. I come from a an IT strategic background that strongely believes in not changing smoothly running setups until the most opportune time (between projects), and this is necessitating mid-project version changing.
What is changing so frequently with that app manager service? Why is it so critical that I be up to date that you force the exiting of the service rather than let it run one version back? Please consider changing this policy as it is disruptive to professional workflow, though, admittedly, the app manager itself isn't likely to cause a project jeaopardizing problem as much as, say, after effects or premiere are. THe more significant issue may simply be that it's annoying me and the staff here when it seems pretty much every time we ever click that CC icon, we have to sit through an update.

I agree. Sick of this kind of blackmail from Adobe.

List View filtered by multiple params (one from cookie) - works fine when groups are expanded initially, but hides filtered items when collapsed and then expanded.

Hello!
I have a page with a list view web part. I am applying multiple filter parameters to it: I have to display documents for all US locations (general) and also filtered view of documents for user's office location. I am setting the user location Cookie and
i have configured webpart with Param to read it. Second filter value is hard-coded (Non-specific location). It all works FINE when i set the list View to expand all groups by default. The problem starts when I set it to be collapsed from the start:
Collapsed group shows correct number of items to be inside but when i expand it, the 1 extra LOCAL item filtered by {PARAM} is missing from inside this expanded group. Only items filtered by a "hardcoded text param" are being shown. And
again - when i change the view and set it to be expanded by default - ALL items are being shown without any problem! Only thing that breaks it - setting of collapsed-expanded for this view groups. nothing else.
Any suggestion on how to work with this thing?
I can't make all groups expanded by default - too many documents, but it only time when it works.
I tried changing view design, other characteristics, but nothing makes it change the behavior so far.
I really want o avoid creating custom "hardcoded" views for each location where location is predefined instead of dynamically read it from cookie. For me it looks like something is connected with PARAM as only these items are affected by this weird
behavior. Thank you in advance!

Hi Olga
I have tried the method you have mentioned, but the jquery function is not working to collapse the groups.
I have tried 2 approaches, but none of them is working fully:
1) Raising the Click event as follows
for (var i = 0; i < links.length; i++)
if (links[i].href == "javascript:" && links[i].onclick.toString().indexOf("ExpCollGroup")
> -1)
links[i].click();
2) ExpCollGroup()
Please suggest or send the correct method to collapse

Weblogic 10.3.0 - Security Violation when Group Membership Lookup enabled

Dear Admins,
We're running a Weblogic 10.3.0 cluster with our own software deployed.
We're using SQL authentication (JDBC to Oracle DB) to authenticate users.
Recently we've been tuning our WL cluster to improve performance, and have enabled Group Membership Lookup Hierarchy Caching.
Sometimes users log into our application and get inssuficient rights (or some other error). This appears to happen at random. Most of the times they can log in without problems.
We determined it's not something to do with the cluster, although it can happen on one node and the other node will work as normal.
In the Managed server we see this error (with test user):
Managed7Server.out00011:java.rmi.AccessException: [EJB:010160]Security Violation: User: 'test' has insufficient permission to access EJB: type=<ejb>, application=leanapps, module=process_general.jar, ejb=LaLifeProcessController,
method=create, methodInterface=Home, signature={}.
When we disable Group Membership Lookup Hierarchy Caching, this error never occurs.
Our settings (Security Realms -> myrealm -> Providers -> SQL Authenticator -> Performance):
Max Group Hierarchies In Cache: 5000 (we have approx. 2000 groups)
Group Hierarchy Cache TTL: 3600
provider specific settings :
Group Membership Searching: unlimited
Max Group Membership Search Level: 0
Also in Myrealm -> Performance we have set :
Enable WebLogic Principal Validator Cache
Max WebLogic Principals In Cache: 5000
If we put the TTL really low (default 60 seconds), the error hardly ever occurs. But we want to have cache that lasts longer then one minute.
This might be a bug, as we have other clusters running on WL 10.3.5, 12c where we use the same cache settings. This issue does not occur there.
I'm more then willing to provide more info or config files
Edited by: user5974192 on 21-nov-2012 5:17

This is fixed now. Someone had defined a Servlet for the web service in web.xml that was preventing the EJB container to kick in.
Edited by: user572625 on Aug 25, 2011 11:54 PM

Attempting to Display Total/Percentage in Answers when grouped by Attribute

Hi all,
I'm relatively new to BI and attempting the following setup. (I'm simplifying the model somewhat of course).
I have a Fact called Job which has an attribute called Type ( along with others such as Create Date , Delivered Date , Length , Score etc ).
What I need to display , is the following columns together in Answers.
Type | Count of Type | Percentage of Total Number of Jobs.
Count of Type is just the number of times the Type shows up for a specific type value.
I can easily do a "Count of Type" as a Logical Column in the Business Model and Mapping for the Fact Table using a Default Aggregation Rule of Count.
Percentage of Total Number of Jobs is supposed to be the Percentage that the specific Type Count is of the total number of jobs . i.e. Count of Type / Total number of all Jobs as %age.
This is where I have my issue. I can create a logical column called Total Number of Jobs using default aggregation rule of count on Job ID and create a Percentage using Calculation Wizard just fine.
But when I try to have this column in Answers against the first two columns I don't get the right result - I get 100% for every row in the third column - because of course it is grouping the results by Type so it is calculating the "Total Number of Jobs" and consequently the Percentage measure for each individual Type. Thus I get something like
Type | Count of Type | Percentage of Total Number of Jobs
1 | 5 | 100%
2 | 5 | 100%
When I really want to get
Type | Count of Type | Percentage of Total Number of Jobs
1 | 5 | 50%
2 | 5 | 50%
Is there any way I can "store" the total number of jobs in the Business Model and Mapping Layer as a logical column in the Job Fact so that it does not display the count aggregate for the grouping (Type) but instead just the total count ?
I'll be glad to clarify if this sounds too fuzzy.
Thanks in advance.
AB.

Hi ,
Thanks for the reply , that is successful at getting past the issue of having 100% as the result in every row which would happen if we used a measure built in the Business Model and Mapping layer.
I'm running into some other minor issues but I think they are data row count related .. I will update this if they are not.
Additional clarification if it helps anyone else with similar issues.
Basically Type is an attribute of the Job Detail Fact ( 0 to many rows per job ) . There is also a Job Fact that is at a higher level of granularity ( one row per job ).
What I am trying to do is display the Percentage or even the Total Number of Jobs ( row count of Job Fact ) in each row along with the Type and Count of Type of Job Detail.
This is of course made complex because not all Jobs have a Job Detail row and some have many.
In my Job Detail logical table source , I have the Logical Table Job Detail mapped to both the Job and Job detail physical tables . ( I have tried connecting both via Inner and Left Outer joins) .
So ideally I would see something like
Type of Job Detail | Count of Type of Job Detail | Total Number of Jobs | Percentage of Total Number of Jobs
1 | 5 | 50 | 10%
2 | 5 | 50 | 10%
Where the percentage and total are of Jobs and the total is less than 100% .

Parameters won't show up when grouping data in intervals

Post Author: Charles Denight
CA Forum: General
Hi,Using Crystal Reports v. 9. I'm trying to create a report that will give me the sales to a group of 5,000 customers who were sent a mailing. For the mailing they were broken down into 12 segments. I have the sales data for all of those who responded. I'm trying to set up a report that will show me the 12 segments as separate groups, their sales for the promotion period (January, 2008) compared to their monthly sales for the previous 3 months (4th quarter) by month.I've tried several approaches but so far haven't licked it. My latest was to set up a parameter for each of the 12 segments, one each. I did this by creating 12 Excel files, one per segment, with account ID numbers for that segment only, saved as text. Then, when I created each of the 12 parameters in Crystal I used the Excel files as import lists for the default values for each parameter. Then I tried to group the data in intervals, based on Account IDs, and set the condition for each group (I thought I could create 12 groups) using the parameter for that segment. But the parameters don't show up in the pulldown list for the condition. It just shows the list of account numbers in the data. I would appreciate any thoughts you have on....1. How to get the parameters to show in this particular approach to the problem.2. Other approaches to solving the problem.Thanks!

Take the flash drive to the computer you know it works on and copy those files off of it, possibly emailing them to yourself so you can use them on your MacBook. Get a different flash drive that will work better with your MacBook.

Links don't work when grouped with a object

I am trying to create links on a element that will slide; however, when I group my link box to the image I created in Sketch I can no longer click the link. Is there a way to fix this? Thank you.

When objects are grouped, the group act as a single object, that's the reason for grouping. You can add a single link to a grouped object, but only one link. Any links added to individual objects will not action when they are grouped.
If you want to link to multiple slides, you will need to keep any objects that include a link, ungrouped, I've never found a problem doing this.

How to suppress page header when group footer prints

I would like to suppress the page header on my report when a group footer prints. My group footer is going to be a bunch of legal mumbo jumbo and I'm going to have it do a page break before so it prints on it's own page. I do not want my page header info printing on this page.
Is there a way to do this? I am on Crystal XI. Thank you in advance.

I haven't tested this, but...
Formula @InGroupHeader:
WhilePrintingRecords;
BooleanVar InGroupFooter;
InGroupFooter = False;
Formula @InGroupFooter:
WhilePrintingRecords;
BooleanVar InGroupFooter;
InGroupFooter = True;
PageHeader.Suppress:
WhilePrintingRecords;
BooleanVar InGroupFooter;
InGroupFooter;
Edit: I think I like Graham's solution better, actually.
Edited by: Garrett Fitzgerald on Jun 15, 2009 12:12 PM

Significance of OD when group is rolled up

Similar Messages

Maybe you are looking for