Signing in to Premiere after reloading.

I had to reload Premiere after a lightning strike took out my computer. On the new computer, I get a sign in message which tells me I can't sign in because I am offline or the computer clock is set incorrectly. Neither is the case. How do I get out of this endless loop?

Similar Messages

Premiere, After Effects, Speedgrade, Media Encoder and... the dynamic link

My feeback after working with the dynamic link these days. Basic project. Editing, color correction, animated titles.
I'm using a 3.5Ghz iMac 24GB Ram and a GTX 780 4GB. (2014 versions & last updates).
Rendering the timeline in Premiere is sometimes extremly slow (with AE comps). Need to quit and reload the project to get a good speed.
Too long delay of refresh for the AE compositions inside Premiere (with the dynamic link). Need to go in AE then back to Premiere to get the refresh.
When i export to media encoder i need sometimes to save then send it 2 or 3 times to get the last edits in the export.
Even worse with the AE compositions. If i change something in AE then export from Premiere i need to quit and reload Media Encoder to get the last changes.
Really fast export from Premiere to Speedgrade and from Speedgrade to Premiere.
But !!! Lumetri fx is not compatible with AE. And Speedgrade doesn't support BlackMagic but only this nVidia Sdi thing.
And why we could not export h264 from AE anymore ???
Quiet disappointing :-(

Using Premiere Pro CC 2014.0.1 (build 21) and Media Encoder 2014.0.1 (build 8.0.1.48) on OS X 10.8.5
If I Export a video from Premiere, I can continue using Premiere, but if I Queue an export, returning to Premiere produces the beach ball of death. If I give it time, the beach ball goes away and the arrow returns, but trying to click anywhere in Premiere simply returns the beach ball. There is nothing to be done but Force Quit Premiere. I can leave Premiere and run any other application, but if I leave to execute the Media Encoder queue, I cannot return to Premiere and use Premiere. I can visit Media Encoder (call it to the foreground) and return to Premiere after the queue is done.
My current workaround is to use Export from Premiere and not use Queue from Premiere.

After reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

after reloading adobe creative suite cs3 on my mac 10.4.11 acrobat will not open any pdfs it previously opened. help!

hello.   hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

I am unable to edit information I have typed into a spacebar, this includes backspace, and when I highlight it, even after reloading the page

I recently upgraded to Firefox 4 on my 3 yr old Macbook, though I am unsure if this is in fact connected. Now I am often unable to edit information I have typed into a search bar or text box (such as this one) even after reloading that page or pressing first the back, then the forward buttons. Has anyone else run into this, and does anyone know what is going on?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

LMS 4.0.1 software distribution 3 out of 7 fail to pass traffic after reload

I've distributed (7) IOS C3560-ipbasek9-mz.150-1.SE2.bin upgrades on identical 3560G PS-S platform using LMS 4.0.1. All jobs come back successfully completed with the /MD5 hash matching exactly what Cisco has on their website. All devices have sufficient 32MB worth of Flash and verified enough was available prior to distribution.
Issue: After reload 2 of these 3560G devices would not pass traffic. Also, neighboring devices could see these devices through "show cdp neighbors detail" but the management IP was not being displayed. After consoling into these devices via (console port) the management IP address was there but was unable to ping this address locally and neighboring devices were unable to be pinged as well. Performed the "sh run" command and verified the config was correct.
***Cisco's engineers suggestion was to load a lower IOS.***
***I've perused the caveats with this release and have not found any solutions.***
I've already replaced the offending switches with new devices but don't want to keep upgrading with this many failures after reloading.

Your devices with the NX-OS versions you indicate should be OK per the LMS 4.0.1 Supported Devices Table.
Have you updated your LMS with the latest device packages? See the procedure here.

Multicast VPN Extranet Support doesn't work after reload

Hi!
We have Cat6500 with configured Multicast VPN Extranet Support feature. After reload of the 6500 customers in the receive MVPN cannot get mcast stream. We connect test device into source MVPN on that 6500 - everything is OK, mcast stream is available.
Workaround is "no mls ip multicast/mls ip multicast". After these commands mcast in the receive MVPN works fine.
IOS 12.2 SXJ2
Looks like a bug. We have several Cat6500 but only two of them have this issue.
Does anybody faced with such trouble?

Hi!
We have Cat6500 with configured Multicast VPN Extranet Support feature. After reload of the 6500 customers in the receive MVPN cannot get mcast stream. We connect test device into source MVPN on that 6500 - everything is OK, mcast stream is available.
Workaround is "no mls ip multicast/mls ip multicast". After these commands mcast in the receive MVPN works fine.
IOS 12.2 SXJ2
Looks like a bug. We have several Cat6500 but only two of them have this issue.
Does anybody faced with such trouble?

10000: PPPoE session recovery after reload

Hi.
We have seen that there are a feature that recover the PPPoE sessions closed in one side and up in the other. This feature is called 'PPPoE Session Recovery After Reload '.
In the feature navigator, we can see that this feature is available for 7200 series. It seems not available for 10000.
But in the release notes of Cisco IOS 12.3(7)XI3,
http://www.cisco.com/en/US/partner/products/hw/routers/ps133/prod_release_note09186a008040929e.html
appears this bug as resolved:
CSCsa46626
PPP PADT messages are not sent by a PPPoX PTA router to a client when the PPPoX user is no longer connected to the PPPoX PTA router.
This feature is enabled only within the BBA Group configuration using:
bba-group pppoe pppoe1
sessions auto cleanup
This issue can occur when a Cisco 10000 Series router is used as a PPPoX PTA router, and there has been a network flap causing the PPPoX users to lose their connections. PPPoE will experience this issue when BBA Groups are in use. VPDN Group configuration does not support this feature.
There are no known workarounds.
We have tested the IOS 12.3(7)XI6, but the router (10000) doesn't send the PADT (auto cleanup). In 7200, it works correctly.
Anyone have has this problem?
Anyone can confirm if this feature is supported?
Regards.
Jose

Hi Jose ,
I checked it using feature navigator and noticed that cisco 10000 doesn't support ""PPPoE Session Recovery After Reload"" feature.
The following platforms support the feature.
1700
1800
2600
2800
3200
3600
3700
3800
7200
7301
7400
Thanks,
satish

IPhoto will not open even after reload

I have remove iPhoto and reloaded from disc. Still getting the same error message. I am basically pretty frustrated at this point, any ideas?
Interval Since Last Report: 13374 sec
Crashes Since Last Report: 8
Per-App Crashes Since Last Report: 8
Anonymous UUID: 41254D60-DDE4-4A37-A55C-DB4E70D14C3F
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/Framework s/iLifeSlideshowProducer.framework/Versions/A/iLifeSlideshowProducer
Referenced from: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/Framework s/iLifeSlideshowProducer.framework/Versions/A/iLifeSlideshowProducer:
stat() failed with errno=5=

I am at my wits end with iPhoto error messages and inability to reload it. It has worked fine until yesterday when I started getting the library not loaded error message. I deleted the app, removed the pkg files from HD/Library/Receipts and reloaded the app from my iLife CD as suggested. I have done this 6 times without success and continue to receive the same error message. During reinstall it runs for a long time saying loading packages. After reload there are no new pkg files in teh HD/Library/Receipts location. I do not know what to do next . . . I am open to any assistance.

Anyway to recover photos on a iPhone 4s after reload of os?

Anyway to recover photos on a iPhone 4s after reload of os?

Only from your backup if you have any.

What is your Premiere, After Effects and SpeedGrade Workflow?

Hi Everyone,
I am an experienced editor who's switched to Adobe's CC barely a year ago. At the moment I'm in the midst of finishing up a corporate project and trying to think of the best workflow between Premiere, After Effects and SpeedGrade. I'm loving the Dynamic Link workflows, but at the some time I'm facing some obstacles, and am wondering how you guys do your work.
Let's say I finished the edit of the project and send the project via Dynamic Link to SG. I finish the grade and then decide to use the Dynamic Link to AE to add some titles with shapes and effects such as Fast Blur. This is where I'm facing the first problem. When I choose a clip to be 'Replaced with an AE Composition', the color correction is gone, and now if I grade in SG, it will naturally grade the titles I added. So, it seems as though my color grade is a waste of time and I have to do it the old school way of first absolutley completing the color grade, exporting, re-importing and then heading for titles and effects. That makes you lose quite a bit of "dynamics" in your work (and time aka money), if my clients want changes for example.
For simple animations with text, and shapes, this is not a big issue since you could easily add the titles to a second Video track. But when you use After Effects which changes the acutal image of a clip by adding effects, things don't work out too easily. But in any case, these might just be the limitations to the relativley new Dynamic Link workflow.
In my specific example, how would you go about it? What is your workflow? Maybe I'm missing out on some tips & tricks.
Be happy to hear from you guys and maybe get some expert knowledge.
Best,
fabian

Hey there,
I'm also looking for a solid workflow solution since adopting (and actually really liking) Speedgrade. So below is what I'm going to try which should work and will follow this thread to see if any other workflows pop up. Also typing this out here to help me with plan of attack
Project Specs - 3 minute corporate video with text animation, interviews, broll, and computer screen replacement
Edit in Premiere
Dynamic link to SpeedGrade for color correction
Open back up in Premiere, confirm all color corrections are applied, and then duplicate sequence to an AE Prep extension
In AE prep sequence, take all AE "base" shots (for computer screen composite or anything needing stabilization) up onto their own track (i.e. V5 & V6)
Add 10 frame handles to in & out, checkerboard clips as needed
Delete all other remaining content but keep blank spaces / no ripple deletes
Export this out to a ProRes4444 QT movie
Import ProRes4444 QT movie back into premiere, add over existing video layers in AE Prep extension sequence, and then there time out the screen shot replacement content to cover effect duration
Dynamic link AE Prep Premiere Pro sequence to AE
Do the AE work
Dynamic link back to Premiere
DoneHopefully
This was my similar work around back in the day before I had Automatic Duck in FCP to AE
Hope this helps anyone else - if there are any glaring "why would you do all that" points - please let me know I'll also report back if there are any horrible roadblocks throughout the process.
_Christina

CS5 Premiere, After Effects, and Encore hang on splash screen - Solution

I just installed Production Premium CS5 on a Windows 7 64 bit system. The install went without a hitch, but when I attempted to start Premiere, After Effects or Encore, they would all hang at some place with the splash screen showing. I spent 2 hours on the phone with Adobe and they never solved the problem. They had me uninstall iTunes and Quicktime, upgrade my nVidea driver and upgrade to a newer version of Quicktime. None of this made a difference and at that point I realized they were not going to fix my problem. The first woman was an idiot and the guy I spoke to next was a lot better, but no solution. Premiere was hanging when loading the Quicktime plug-ins.
Then I had an Aha! moment. I shut off User Account Control, rebooted and then everything worked. I could also get the programs to work with UAC on if I changed the shortcut to "Run as Administrator" but then there would be a UAC prompt. By the way, I was running as a user with full administrator privileges.
I am astounded that Adobe has never encountered this problem before and did not have an immediate solution. Once again, Adobe Tech Support has continued to provide pathetic tech support.
Steve

The plug-ins that were involved in the hang on the splash screen were:
ExporterQuickTimeHost.prm
ImporterQuickTime.prm
The splash screen would hang for 5 minutes on each of these and then if PPro started it would only be a plain white window with the Menu Bar and then there would be no further response.

After reloading a website its page is not active.

After reloading a website the page is not active. I have to click on a different program, minimize and restore, or click on the windows task bar and then things are able to be clicked on and pointer is recognized. All sites are affected
== URL of affected sites ==
http://ALL SITES
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

Hi ,
According to your description, my understanding is that you got an error when you clicked the link to a library.
Whether you customize the library page.
Please check Recycle Bin on your site, see whether there is the library in it. If yes, restore the library, then compare the result.
If this issue still exists, please find more information about this issue in the logging file, the path is C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

CX Module failed after reload

Hi there!
I do know if it is some kind of bug, but all the time after reload the CX module all things stop work, regardless of what form do I reset the module.
I already tried to acccess the module and reload, tried to stop services with "services stop" command and after that "reload", tried to shutdown using ASA commands and reload it from ASA... everytime I reload when the module come back all services start perfectly, like example below:
spcx02>show services status
============================================================
Process           | PID   | Up    | Up Time
============================================================
AD Interface      | 6284 | True | 05:03:03
Message Nameserver| 6022 | True | 05:03:59
HTTP Auth Daemon | 6094 | True | 05:03:58
PDTS              | 6073 | True | 05:03:59
HTTP Inspector    | 6193 | True | 05:03:37
HTTP Server       | 5972 | True | 05:03:59
Data Plane        | 6270 | True | 05:03:06
Management Plane | 6115 | True | 05:03:45
HPM Monitor       | 6289 | True | 05:03:03
Updater           | 6399 | True | 05:02:52
Card Manager      | 5930 | True | 05:03:59
ARP Daemon        | 6089 | True | 05:03:58
Event Server      | 6133 | True | 05:03:41
TLS Proxy         | 6204 | True | 05:03:37
============================================================
spcx02>show ver
Cisco ASA CX Platform 9.1.2 (42)
Cisco Prime Security Manager 9.1.2 (42) for spcx02 firewall
spcx02>
I even can access the GUI using my browser, but all athentication with CDA or AD that before boot was working correctly show up the error:
"Connection failed with error: Could not connect to virtual directory interface."
Everytime I reload I must reinstall the entire module and reconfigure everything. Anyone know if this is a bug that crashes the database or something like this?
Regards,
Rodrigo Alves

Ah, I forgot to write down that after reload the module and it come back it stop all traffic passing through the firewall and I must remove the policy-map configuration:
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect rsh
inspect rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect h323 h225
inspect h323 ras
inspect skinny
class class-default
cxsc fail-open auth-proxy

Signing in to Premiere after reloading.

Similar Messages

Maybe you are looking for