Silent install of custom application
Is there is a way , where we can use adobe service to install the custom application as silent installers through web browser as soon as people login into our webapplication.
Thank you for the reply, my requirement is like this, we have developed a web application, which requires certain dll's and other files to be installed on a client machine to run this application. The prerequisties has to be installed as soon as they login into our application first time at the back ground, without user intervention
Similar Messages
-
Repackaging Safari 5.1.7 with silent install and custom settings
Hi everyone,
I'm searching for a solution to create a custom installation for Safari 5.1.7.
I accomplished the same task for other browsers using the MSI extraction from the .EXE installer and using different methods to set custom settings like: EULA accepted, default home page, etc during the installation process.
My question here is if Apple supports or allows to do a redistribution of its application for large Windows Enterprise environments with this kind of custom settings using either Flexera Install Shield or any other to modify the MSI installer and accomplish this task without the need of using external .JS, .XML files like other browser silent installations supports for redistribution / repackaging.
I isolated the Safari MSI file to prevent the installation of the other software that comes with the main .EXE: AppleSoftwareUpdate.msi, Bonjour and Bonjour64.msi, SetupAdmin.exe but I can't modify the default home page or prevent the prompt to set the default browser from inside the MSI to have it done.
This custom settings should be done in a more elegant way than using Regedit to search for the changes after the Setup finishes.
If you have any answer for this please let me know.
Kind regards.Well I guess I have to reply to myself. No one seems to know this one.
I found that : https://discussions.apple.com/thread/2316559?threadID=2316559 is Not working for Safari 5.1.7 on Windows 7 x64 even if you tried to open the pslist file from : ...\AppData\Roaming\Apple Computer\Preferences\com.apple.Safari.plist the file seems that will be set as per user and even if you modify it it will not work.
No support has been found to have a GPO neither Flexera Admin Sudio Repackager or Tunner has succeeded to repackage or Build a successful MSI using Isolate or Installation Monitoring process due to some errors during the installation pointing to folder : C:\Windows\winsxs
So, basically I just need to confirm with any Apple guru if this is Possible or Not to do that or what could be the solution to get a normal SCCM 2012 package for Safari 5.1.7 with custom settings: Home Page, Disable ask for Default Browser, Disable Ask for Updates.
By the way I have the switches that works fine for Silent install and it works fine:
msiexec /i Safari.msi /qn SCHEDULE_ASUW=0 DESKTOP_SHORTCUTS=1 installdir="%programfiles(x86)%\Safari" allusers=true reboot=suppress
I will really appreciate if some one replies asap !!!!
Thanks and Kind regards. -
Issue with NI-CAN 2.7.5 DLL(s) install for custom applications
We have custom applications built on top of NI-CAN for Windows using the MS Visual C lib and header. In the past, to run our applications, we simply installed the latest NI-CAN package. Our applications would run, find and access any runtime DLLs, and be fine.
With NI-CAN 2.7.5 though, we are seeing errors in our applications that suggest they cannot see the required DLL necessary to operate. The error is:
"A dynamic link library (DLL) initialization routine failed."
Did anything change in 2.7.5 with regards to the placement or installation DLLs required to run custom NI-CAN applications?I was able to get a little more information. Using Visual Studio to get a debug log, I see the following. With 2.7.4, the NI-CAN DLLs load and it work fine:
'MATLAB.exe': Loaded 'E:\jobarchive\Btm1\2014_02_21_h12m30s17_job89749_pass\matlab\toolbox\vnt\vnt\mexNICAN.mexw32', Symbols loaded.
'MATLAB.exe': Loaded 'C:\Windows\System32\Nican.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanFrm.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalu.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalut.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\nipal32.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanpu.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanCfq.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\nicanDBA.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanTsk.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NiSpyLog.dll'
On 2.7.5 though, additional error information shows up:
'MATLAB.exe': Loaded 'T:\12\jpyle.Btm1.j86236.sb\matlab\toolbox\vnt\vnt\mexNICAN.mexw32', Symbols loaded.
'MATLAB.exe': Loaded 'C:\Windows\System32\Nican.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanFrm.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalu.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalut.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\nipal32.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanpu.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanCfq.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\nicanDBA.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanTsk.dll', Cannot find or open the PDB file
'MATLAB.exe': Unloaded 'T:\12\jpyle.Btm1.j86236.sb\matlab\toolbox\vnt\vnt\mexNICAN.mexw32'
'MATLAB.exe': Unloaded 'C:\Windows\System32\Nican.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NicanTsk.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NIcanFrm.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NicanCfq.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nicanDBA.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NIcanpu.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nipalu.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nipal32.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nipalut.dll'
You can see it tries to load under 2.7.5, get a bunch of PDB file issues and then immediately unloads.
Inspecting the DLLs under 2.7.4 vs 2.7.5, they look identical except for the nicanDBA.dll. That's the only one that has a version difference between NI-CAN versions. In both 2.7.4 and 2.7.5, all DLLs are being properly installed to \windows\system32 as expected so both sets are fully accessible path-wise.
Please advise. -
How can I perform a silent install of an application AND use "run executable after installation"
I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jasonjmburns wrote:
I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jason
This problem is fixed in a future release of LabVIEW. Here's the CAR ID 67549 for tracking purposes.
Message Edited by Bob P on 07-10-2008 09:10 AM -
Silenting Installing AIR applications using Altiris
I was wondering if anyone can provide some guidance or
recommendations on how to silently install an AIR application using
Altiris. We are not able to package the .air installer and proceed
with the setup without prompting the user for the options screens.
Any help or assistance that can be provided would be greatly
appreciated.
Thanks!If you have signed up for Adobe AIR Runtime Distribution Agreement, you should be able to use Silent Installation of AIR Runtime and App. We use that in our msi installer.
Usage is:
-silent {-eulaAccepted ( -location <loc> ) -desktopShortcut -programMenu} path_to_air_file
Details of the options are included in the adobe_air_runtime_redistribution.pdf that you will get when you sign the agreement.
-Jeesmon -
Silent install Photoshop CS 6 extended and how do i get it?
I hva bought a license for Photoshop CS 6 extended, and i need to to get a hold of a .msi (microsoft installer) file for this application, where do i get it?
I also want to do the silent install for this application, with both installation and registration of the product using my license. I have no internet connection and i am wondering if this i possible?Hi There,
Please go through the doc below to see the workflow to create a .msi.
http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/AdobeApplication ManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
Thanks,
Ashish -
Silentely deploy an air application
Hi,
AIR is already installed on my computer. I run a v3.
Now I want to silentely install an air application (not air itself) on many computers so double clicking the air file is not an option. Anyone knows how to silentely answers the questions asked during the install ?
I also get the message saying the publisher is unknown. Is there a way to skip this step without digitally signing the application ?
ThanksDoes this thread help at all?
http://forums.adobe.com/thread/414547 -
I would like to migrate a client java application we have to
an air application. However, the product supports100-300 clients.
We have an automated mechnism to install/update all of the client
software, so no user interaction is required on the client systems.
I have searched through this forum, and it seems there is no way to
do an install of the air runtime or an air application without
being prompted with the liscense agreement dialogs.
Are there any plans to to enable a silent install of the air
runtime and air applications? If so is there a timeframe when it
will be enabled?Yes; the only supported mechanism for silently installing an
AIR application will be via the redistribution support.
We've done it this way because it's the only way to guarantee
that, when your application is installed, the correct version of
AIR also gets installed. In fact, it's the re-distributable
installer for AIR--the thing you sign up for--that contains the
capability of silently installing an AIR application.
Oliver Goldman | Adobe AIR Engineering -
Error Code 7 when attempting silent install
Hi there,
When I try a silent install of an application, I occasionally get this logged to my .airinstall.log and .airappinstall.log files:
~/.airinstall.log
Starting silent x1 install from file:///Applications/Eye-Fi/Eye-Fi%20Center.air
UI SWF load is complete
stateRunningAppInstaller: appinstaller -runtime "/Applications/Eye-Fi/Eye-Fi Center Installer.app/Contents/Frameworks" -silent -withRuntime -url -location /Applications/Eye-Fi file:///Applications/Eye-Fi/Eye-Fi%20Center.air
App installer failed; exit code 7
begin quitting
~/.airappinstall.log
Starting silent app install of file:///Applications/Eye-Fi/Eye-Fi%20Center.air
UI SWF load is complete
UI initialized
Unpackaging to /private/var/folders/1a/1a3UlrdVEhGjua3KXTo49E+++Tc/TemporaryItems/FlashTmp0
unpackaging is complete
application is bound to side-by-side version 1.0
application is bound to this version of the runtime
app id fi.eye.Eye-Fi-Center
pub id E430518E652B889A80EC0E8A6E532C09FF36DF62.1
Application not located
creating native installer in: /private/var/folders/1a/1a3UlrdVEhGjua3KXTo49E+++Tc/TemporaryItems/FlashTmp1
native installer creation complete
Starting install
Destination for installed application is /Applications/Eye-Fi
stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
starting cleanup of temporary files
application installer exiting
When I look at the /Applications/Eye-Fi directory, this is what I see for permissions:
prabha-mac:OSX prabhak$ ls -ld /Applications/Eye-Fi/
drwxr-xr-x 3 root admin 102 Jan 13 16:10 /Applications/Eye-Fi/
prabha-mac:OSX prabhak$
Any ideas on why this directory isn't write-able?
SeanYolanda,
Thank you very much for your concern and your assistance!
Unless you instructor otherwise, I will implement the following steps:
1. Download the System Update Readiness Tool from http://windows.microsoft.com/en-in/windows7/what-is-the-system-update-readiness-tool and run.
2. Shutdown PC.
3. Start PC.
4. Disable Avast Free A/V SW.
5. Install Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2931356).
6. Post outcome here.
7. If install fails, upload the cbs file (windows\logs\cbs) and windows update log (%windir%\Windowsupdate.log) here for further analysis.
Thank you, again, for helping me.
Sincerely,
Jim Kochanski
I followed all of the steps above.
When I went to install the update, seven were available and all seven failed (see below).
The log files were too large to cut and paste therefore you can find them at:
http://www.mediafire.com/view/vqm41z2bghb85fq/WindowsUpdate.log
http://www.mediafire.com/view/q9dc84kf6ftm31d/CBS.log
I was just wondering if anyone was trying to help me with this?
Thanks!
Jim -
I am trying to do a silent install of Sun Application Server 8.1 on Solaris 8. I am using the Q4 jes installer.
I can install manually, but if I give a state file, the installer wuites without generating any error or creating any logs.
PLEASE HELP!
LizPlease post this in Java ES installation related forum.
http://forum.sun.com/jive/forum.jspa?forumID=324 -
Silent install Air Runtime and Air App with custom installer?
I want to use a custom installer that will perform some actions, and then silently install air runtime and an air application. The goal here is to be able to perform a customized install for an Air application (for a user that might not have Air installed) without confusing the user with multiple install screens. Can I use a custom installer to silently install Air (if the user doesn't have it installed) and the Air app? If so, are there any restrictions on the custom installer? If there are any examples of this, please provide the links.
Since you applied for the distribution from Adobe you should
have received a link to a page where you can download what they
call the "side-car" installer. It's basically an installation
system they are making available to developers that can be easily
configured to deliver a bundled runtime and application
installation for Mac and Windows.
Check your email again and see if you can't find a link in
there pointing you to a download page for the AIR runtime as well
as the aforementioned side-car installer. For those who don't know,
here
is where you can apply for a redistribution permit for AIR.
I have a small tutorial posted that might be of help to you
on my blog:
http://blog.arnimaack.com/flex-air-series-4-air-all-in-one-installers-on-CD-DVD -
AIR Application Silent install
Is it possible to start AIR application immediately after Silent install.
We have already signed up Adobe AIR Runtime Distribution Agreement.
and i am using below command line for silent install.
Airinstaller.exe -silent -eulaAccepted -location "C:/Program Files/Abcd" abcd.air
It works fine. But i want to launch AIR application immediately after install. Is it possible?
Thanks!Thanks for posting the log. It appears that the install is failing during the MSI portion of the install.
Microsoft has just released a brand new tool that should help you resolve this problem. Would you mind giving it a try and let us know how it works for you? When running the new tool, go through the uninstall process and try to remove AirWrite from your system. Once that's done, give your command line another try.
http://support.microsoft.com/mats/Program_Install_and_Uninstall/en-us
Thanks,
Chris -
Silent Install fails, normal install works. Application Server 10.1.2
Hi All,
I'm setting up an automated install of Application Server 10g 10.1.2.0.2 (Forms and Reports). When I install it silently using a silent install file, the install completes succuessfully but it isn't actually fully functional, and it isn't recognized by OEM Grid Control.
When I install it normally, using the gui, it works fine and is recognized by the OEM Grid Crontrol.
I'm running on Solaris 10 zones, and I used the recording feature for Silent installations to generate a silent file, but that didn't help either.
Any advice? Tips? Information and your own personal experience would be highly appreciated.
ThanksI realized that I was missing a few parameteres that I found at this site:
http://download.oracle.com/docs/cd/B32110_01/install.1013/b32411/basic_install.htm#BABCHEJI -
SAP BPC 7.5 Client, Silent install but with progress bar, can it be done?
Hi All,
I need to uninstall the BPC 7 Client and then deploy 7.5 to around 250 users accross the country.
We have SCCM (SMS) in place so will be using that.
I have the uninstall of 7 sorted and I have the response file etc sorted for the silent install of 7.5 and the install runs, silently, no issue.
Is there a way though that one can "turn on" the progress bar during the install? So that users dont shutdown or disconnect in the 15min it takes the install to run.
By way of example, in the SAP Business objects enterprise client on can configure the Silent install so that although it never prompts the user for a reponse there is a progress bar that runs, indicating that there is an install in progress.
Thanks in advance,
BryanHi Sebastian,
No worries, I am using a pop up countdown so the users have some idea on progress. Would love to know why the install runs for over 15min.
In the above case the uninstall was easy as we had deployed using MS AppV so it was just a case of deleting the advert in SCCM and the application was pulled from the users desktops.
For 7.5 I am using a vbscript with following to uninstall:
The install string pulled from the clients registry uninstall folder:
RunCommand Chr(34) & "C:\Program Files\InstallShield Installation Information\{EC8753EF-EE78-48B5-A4D0-FBBD237B5D53}\setup.exe" & Chr(34) & " -runfromtemp -l0x0009UNINSTALL -removeonly"
We create a custom link, so this deletes it.
DeleteFile "c:\Users\Public\Desktop\SAP BPC 7.5.lnk"
You should be able to create something similar for 7.0 & 7.1
Hope that helps,
Bryan -
Adobe Acrobat XI Standard 11.0.10 silent install failing with error 1603
Hello
I just updated my AIPs for Adobe Acrobat Pro 11 Pro and Standard. The Pro silent install is working fine. But I cannot get the Standard install to run on Windows 7 or WIndows 8. I have gone over every detail that I can think of or find on forums.
I use the Adobe Customization Wizard XI and choose the basic stuff to create my transform. I don't generally enter a serial number in the customization setup but I tried that and the installation did appear to complete successfully. But when I tried to open Acrobat it did not work. Processes like PDapp.exe where running in a loop but never stopped. Without a serial I get the errors below and the install fails almost immediately. I have recreated the API and transform a few times hoping it would help.
Installing with the following line msiexec /i "%~dp0AcroStan.msi" TRANSFORMS=AcroStan.mst /qb /L*v c:\acrobat.log I get an error message that just says "error".
Application Event logs
Product: Adobe Acrobat XI Standard -- error.
Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.10. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1603.
When I run the AcroStan.msi by itself the installation completes successfully so it would appear the issue is in customization process or the .mst file. Any help would be greatly appreciated.
Thank youI'm assuming that verbose logging is accomplished by adding /L*v c:\acrobat.log ? No, I do not have CustomAction AAMIU_Install.196A45B3_0387_4DF9_9420 in my log file. The only items referencing 1603 are below.
CustomAction CheckForPendingOperation returned actual error code 1603 but will be translated to success due to continue marking
CustomAction SetLotusNotesInstalled returned actual error code 1603 but will be translated to success due to continue marking
CustomAction ProcessAbcpy returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (84:C4) [15:30:14:422]: Note: 1: 1708
MSI (s) (84:C4) [15:30:14:422]: Product: Adobe Acrobat XI Standard -- Installation operation failed.
MSI (s) (84:C4) [15:30:14:422]: Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.10. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1603.
MSI (s) (84:C4) [15:30:14:458]: Attempting to delete file C:\windows\Installer\9d9a98.mst
MSI (s) (84:C4) [15:30:14:478]: Deferring clean up of packages/files, if any exist
MSI (s) (84:C4) [15:30:14:478]: Attempting to delete file C:\windows\Installer\9d9a98.mst
MSI (s) (84:C4) [15:30:14:478]: Unable to delete the file outside of the engine. LastError = 2
MSI (s) (84:C4) [15:30:14:479]: MainEngineThread is returning 1603
MSI (s) (84:28) [15:30:14:480]: Calling SRSetRestorePoint API. dwRestorePtType: 13, dwEventType: 103, llSequenceNumber: 31, szDescription: "".
MSI (s) (84:28) [15:30:14:483]: The call to SRSetRestorePoint API succeeded. Returned status: 0.
=== Logging stopped: 1/16/2015 15:30:14 ===
MSI (s) (84:28) [15:30:14:484]: User policy value 'DisableRollback' is 0
MSI (s) (84:28) [15:30:14:485]: Machine policy value 'DisableRollback' is 0
MSI (s) (84:28) [15:30:14:485]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (84:28) [15:30:14:485]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (84:28) [15:30:14:485]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (84:28) [15:30:14:486]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (84:28) [15:30:14:487]: Destroying RemoteAPI object.
MSI (s) (84:54) [15:30:14:487]: Custom Action Manager thread ending.
MSI (c) (E4:0C) [15:30:14:489]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E4:0C) [15:30:14:489]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/16/2015 15:30:14 ===
Maybe you are looking for
-
Why is my Time Sheet not working on Android Readers?
I have a Time Sheet with Javascript that adds the times up, and it works perfect with the PC version of Adobe Reader, but when I try to use it on a nexus 7 tablet the calculations don't work. I have tried the official Adobe Reader for Android as well
-
L How many are running trials on Virtual Machines and under what software
I'm just curious here -- I'm not sure if this Forum has something like a POLL but I'm interested in what type of Virtual Machine setups people are using. I'd like to know HOST OS (RAM size) , Guest OS (Ram size), ABAP trial / JAVA trial / both, Virt
-
Profile Imanges are not getting deleted from Profile Image library
Hi, If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite. I Edit my profile again and this time I remove the profile image and save the changes. Image i
-
Phone: Android - 4.4.4 Firefox - 37.0.2 Desktop: Windows XP Firefox - 37.0.2 Nothing will sync to either device. Is this because XP is incompatible with the newer version of firefox sync? If yes, then how can I go back to the old version and sync? I'
-
Real-Time Collaboration Instant Messaging & .wmv video ?
Hi, is posible using the last version Netweaver 2004s and Netweaver 2004s BI for some <b>Real-Time Collaboration Instant Messaging</b> for speak to users depending the costcenter and territory area ? So idea is show too video .wmv for Principal Direc