Simple connection to Access - in hurry!!!

Hello
I am really in hurry, all I need is to write table to Access
without some sophisticated tools. I can create the table in
Access and simple transfer some data in to it. How I can do this.
I have spent 2 days for searching for some SQL's, examples and
many more and I am exhausted.
I need working example of transferring data to MS Access from
Labview 6 in Windows NT 4.0
Can anybody help me?
Thanks
regards
PP

The attached example uses the DAO activeX object to send data to a database table. In this manner you can send data to any DSN with a ODBC driver. Other examples can be found on the ni website (www.ni.com).
Attachments:
DAO_SQL.llb ‏77 KB

Similar Messages

Simple Connect access other Components

Hi !!
I'm using FMS components, in that I'm not able to connect the
simple connect component with other components which were in other
frame.
Can any one please help in solving this issue.
Thanks in advance
Anil Golla :

Hi anil!
well it was not the problem with the instance name! well i
even i am not quiet sure what is the problem or now can say what
was the problem!
one fine day it started working automatically, with out me
doing any changes!!!
Unusual right?

Difference between connection pooling and simple connection

Anybody please tell me what is the Difference between connection pooling and simple connection and also where we define connection pooling and how.
Thanks
Please reply soon
amitindia

Creating and closing connection to the database is a relatively slow process. Equally connections use database resources so you can't just open as many as you want.
A connection pool maintains a number of open connections throughout the lifetime of the application. Instead of opening and closing the connections your application just "borrows" them from the pool when they're needed.
If the pool runs out of connections it will usually create new ones as needed until you reach some predefined upper limit.
A good connection pool will also manage connections which have failed for any reason, and report code which fails to return connections to the pool (ie connection leaks).
The number of connections created at startup is referred to as the "low water mark" and the maximum number that the pool will allow to be opened at any given time is the "high water mark". If no connections are available client code will generally block until one is released.
If by "defined" you mean where can you get a working implementation then your database or application server vendor is likely to provide one. Also the Apache Jakarta Commons includes [url http://jakarta.apache.org/commons/dbcp/]an implementation which you can use with any JDBC driver.
Dave.

How to connect my access database using applet?

hi all,
i need to connect my access database in my applet program which should work like an atm machine..I dont know how to connect it. Im new to applet same thing in JDBC application. Please help i terribly need it, our deadline in our case study is fast approaching and i still dont know how to do it. I tried the tutorial but i received some sql exception error. thanks!

Try this link
http://java.sun.com/docs/books/tutorial/jdbc/basics/

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

Cannot connect to Access 2007

I got an exception error for connecting to Access 2007 (.accdb) . However, I can connect to the Access file with the .mdb file. I am using window vista. I would like to know is there anything I need to configure to be able to connect to the Access (.accdb).
Error:java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
How do I specify a driver?
Thank You

BB81 wrote:
I do print them? what should I do. I have no idea how to connect to the database I have now. I am wandering whether I need to download a driver? where can I download it? Does sun offer a free download driver for connection to database using ODBC?
Your code looks something like this.
DB_URL+=filename.trim()+";DriverID=22;READONLY=true}";
con = DriverManager.getConnection( DB_URL ,"","");
Your code needs to look like this.
DB_URL+=filename.trim()+";DriverID=22;READONLY=true}";
System.out.println("DB_URL=[" + DB_URL +"]");
con = DriverManager.getConnection( DB_URL ,"","");
Once you have run that then you post all of the line that println() prints here. You copy and paste it (do NOT retype it.)
Then you also post the full stack trace.

How to connect MS Access or other d/b tools to SAP R/3

Hi SAP Experts,
I got a requirement i.e by using MS Access or other database tools to take the SAP table dumps and analyze gaps or errors in the system data using business guided .
I don't know how to connect MS Access to SAP R/3 and how to connect other database tools to SAP R/3.
pls any body can explain me on this topic or inform me where i can get the corresponding documents.
This is urgent for me.
I appreciate you're help.

Hi,
For some databases (for example MSSQL, Oracle,...) you can use transaction DBCO (table DBCON) to create connection to external database. Then you can use native SQL in ABAP programs (EXEC SQL command).
Krzys

Error when Connect to Access 2007 with password using OLEDB

Hi there,
I am seeing the below error when trying to Connect to Access 2007 with password using Crystal XI or Crystal 2008, when using the OLEDB to connection Access data.
Logon failed
Details: DAO Error Code: 0xd0f
Source: DAO.Workspace
Description: Unrecognised database format 'path to database\crs project database.aaadb
Get though when I use Access 2007 without password setup.
Many Thanks for any one can help.
Daphne Li

As a copy of this query has been posted to the CR design forum at 11:21, assuming this is indeed a design question.
Thus setting this thread as answered.
- Ludek

To connect MS Access database in back ground

Hello Gurus,
I have a requirement in which I need to connect to MS Access database in back ground as a daily job. I tried using OLE2, Its working fine in front end but failed in back ground.
Please help me in this regard.
Thanks,
Naresh.

Hi naresh,
I am also facing this requirement to connect MS ACCESS database in front end or back end. Could you please help me out in this.
plz provide me steps and program.
thanks
Sarayu.

Setting up default connection for accessing emails...

I had a quick look and found similar problems on here, but none that I thought were the same.
I've been able to set up Gmail to be received through my 'Messaging' on my N96. Turns out its quite a handy function. Also figured out that you can get it to automatically check you mail at regular intervals. I want to use this, but I don't want to have to select the connection every time the phone wants to check for new mail. So I need to set up a preferred connection. That's no problem...
The problem occurs when I try to select my WLAN as default. However, every time I select it, the phone freezes up. Not completely, as I can change programs and even exit the messaging settings via the hang up key, but if I do that, it doesn't make any changes.
I have deleted and restored the WLAN connection, I have accessed my inbox manually, so it isn't a problem on Google's end, and I have checked the various connection options to no avail.
So, does anyone know why it my phone would freeze when trying to set up my WLAN connection as the default connection for accessing my e-mails? Any questions about my situation, just ask and I will gladly supply whatever you ask for.
Regards,
Jarvis
Message Edited by jarvis187 on 15-Jan-2009 01:24 AM

No help available out there? If you need it explained clearer just say so and I'll do so. Thanks in advance.

N8 Belle connection failed- access denied. NO INTE...

After the Belle update I have a problem with my internet connections. Both WiFi and mobile internet are not working at all. At first it was ok but after a while or a reboot of the device I simply cannot connect to any wifi wether it's a known one or an open one. I always get an box message on the top of the screen that says
"Connection failed
Access denied"
There's nothing I can do about it! I tried reinstalling Belle and it was ok at first but shortly the problem occurred. So I have a phone with NO INTERNET CONNECTION at all!!! It's almost useless.
I would like a nokia support response please. This is a huge problem!
Solved!
Go to Solution.

Posts: 3
Re: N8 Belle connection failed- access denied. NO INTERNET![ Edited ]
19-Feb-2012 11:12 AM - last edited on 19-Feb-2012 11:30 AM
Hi Torben
Thank you for contacting Nokia Care customer support.
Since we wrote last I have got a lot more experience with the Belles situation in this area.
Recently suspicion fell on a bug in old saved data from the "Anna" that causes general network error.
To solve it, there must be a backup - but NOT the programs / settings, since they bear the error.
Subsequently, disconnect the phone from, select the Offline profile (Press and hold the cards on the off button and choose the one on this list)
"Ring" now * # 7370 # accept and enter the security code is 12345, if it asks for it.
Your security code if you have change it.
Set Time & Date and reviewing start-up menus.
Get immediately sent to the settings for data and multimedia.
Restart your phone and try now about the Internet is working properly.
Do they do it; you can safely restore contacts and whatever else you have in your backup.
I would personally appreciate it if you want to participate in a brief survey that will be about my response to you. Customer survey will receive a separate e-mail.
If there is anything I can do for you, then you're obviously more than welcome to contact me again.
Sincerely
Jannik Petersen
Nokia Care
Thanks, these steps resolved my Connectivity issues

Connecting MS-Access database with Oracle Forms

Hai,
Can any one suggest as to how I can connect MS-Access database
with Oracle Developer Forms. What is the procedure ? Suggest me
if I need to install any drivers. Waiting for an early reply.
Warm Regards,
Raghav.
email:[email protected]

Not possible as far as I know.
Probably because ODBC itself (the defined interface) doesn't support it.
There is a commercial MS Access (java only) driver that might support it.

How do i connect ms access database in Eclipse ?

Help me to solve the problem
how do i connect ms access database in Eclipse ?
Its urgent please
give any link that gives the procedure to connect ...........

The Eclipse WTP by default has a database explorer: Window - Show View - Data. Finally rightclicking at the new "DB Servers" console gives straightforward menu options.

Mifi 2200 - Error 691: Connection Failed - Access was denied ...

I have set up a Mifi 2200. It CAN work great. Intermittently though, I can't get connected wheen using the device as a USB modem. It will ALWAYS connect fine when I connect through Wifi.
The error I get: Mifi 2200 - Error 691: Connection Failed - Access was denied because the username and/or password was invalid in the domain.
I have done all the usual things:
1. Reinstalled the VZAccess Manager software including latest update. I am at 7.3.13.1 (2635a)
2. Obtained all latest Windows updates (XP SP2).
3. Removed, replaced, manually, auto-configured a Dial Up Connection many times.
4. Replaced the USB to microUSB cable.
I found the VZAccess Managers diagnostic tool where you press CTRL-D and enter the password diagvzw and see some additional settings.
There I had a minor break through. There is a setting where I can force the modem to only use 1X. If I do that, I connect every time without fail. No problems, no errors. The moment I put that setting back to Auto or forced EVDO, I fail again, or only work every 20th try or so after a reboot of the device etc.
Is anyone else seeing this, or getting this error? It can't be an account issue since it works sometimes on EVDO and ALWAYS fine on 1X.
Thanks for any help or ideas.
PN

I think I have an update that might be a clue that it IS an Verizon issue either with the device itself or at the towers.
I have determined that when I connect to it through WiFi where I mentioned it seems to ALWAYS work. Well, it always works in 1X mode there. It fails in EVDO mode.
Something up at the towers? Although multiple towers have been tried.
Anyone any ideas?

Can't connect to Access 2007 data with password using OLEDB

Hi there,
I am seeing the below error when trying to Connect to Access 2007 with password using Crystal XI or Crystal 2008, when using the OLEDB to connection Access data.
Logon failed
Details: DAO Error Code: 0xd0f
Source: DAO.Workspace
Description: Unrecognised database format 'path to database\crs project database.aaadb
Get though when I use Access 2007 without password setup.
Many Thanks for any one can help.
Daphne Li

Hi Daphne,
Crystal can only use the top level password. If you have a system password I don't believe that will work, never has.
Thank you
Don

Simple connection to Access - in hurry!!!

Similar Messages

Maybe you are looking for