Simple Executable Report based on SD

Hi
in my selection screen i have 2 parameters Customer No and Date
based on this customer no and date .. all the purchase orders and sales orders and materials i want to fetch from the tables..
for this.. what are the tables i need to use.. and what is the select statement..
Thanks
Babu

Babu,
You can get it from the combination of VBAP, VBAK and VBPA tables.

Similar Messages

Creating a simple ALV report based on join condition

Dear All
SAP Version: ECC6 EHP7
I wan to create simple ALV report based on join condition. can anyone provide me the complete steps to create this report.
Regards,

Hi Syed,
Please check the link,
ALV report - Joining 2 tables
Regards,
Prakash.

Creating a performance report based upon a custom group

I am trying to create a simple performance report based on a SCOM group that I created, however when I run the report the relevant data cannot be found. When I look at the group membership I see a list of Windows servers. I then go into a generic
performance report, add a single chart, and line series, and select "Add group" and then search and select the SCOM group I created. I then add % processor time for 2008 systems as my rule. However when the report is run, no relevant
data is found. Performance reports run fine when selecting "Add group" and selecting the members of the group themselves.
My suspicion is that it is trying to run the performance report based on the group object and not the members of the group. Is there anyway that I can accomplish this? Perhaps via XML?
Keith

Hi,
For your reference:
Creating Useful Custom Reports in OpsMgr: How to create a custom performance counter report for a group of servers
http://www.systemcentercentral.com/creating-useful-custom-reports-in-opsmgr-how-to-create-a-custom-performance-counter-report-for-a-group-of-servers/
SCOM reports on performance counters for large groups of servers
http://www.bictt.com/blogs/bictt.php/2010/11/28/scom-reports-on-performance-counters-for-large-groups-of-servers
Regards,
Yan Li
Regards, Yan Li

Create Report based on Query in SCCM 2012

I have a lot of useful queries, however I would like to create a few reports based on these queries. What is the simple way to do this? I started to create a New Report, but kind of lost after that. Is there a way I can just copy my statement from the
query to a blank report?

Execute the WQL query from the queries node in the console and watch smsprov.log on the site server. It should contain the "translated" SQL statement.
Torsten Meringer | http://www.mssccmfaq.de

How to create a report based on a DataSet programatically

I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
      public NewReportWorker(string reportFileName)
         : base(reportFileName)
public override void Process()
         DatabaseController databaseController = ClientDoc.DatabaseController;
         Table table = new Table();
         string tabelName = "Table140";
         table.Name = tabelName;
         table.Alias = tabelName;
         table.QualifiedName = tabelName;
         table.Description = tabelName;
         var fields = new Fields();
         var dbField = new DBField();
         var fieldName = "ID";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         dbField = new DBField();
         fieldName = "IDLEGITIMATIEBEWIJS";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         // More code for more tables to add.
         table.DataFields = fields;
         //CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
         //   new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
         //info.Attributes.Add("Databse DLL", "xxx.dll");
         //table.ConnectionInfo = info;
         // Here an error occurs.
         databaseController.AddTable(table, null);
         ReportDoc.SetDataSource( [MyFilledDataSet] );
         //object path = @"d:\logfiles\";
         //ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
   internal abstract class Worker
      private ReportDocument _ReportDoc;
      private ISCDReportClientDocument _ClientDoc;
      private string _ReportFileName;
      public Worker(string reportFileName)
         _ReportFileName = reportFileName;
         _ReportDoc = new ReportDocument();
         // Load the report from file path passed by the designer.
         _ReportDoc.Load(reportFileName);
         // Create a RAS Document through In-Proc RAS through the RPTDoc.
         _ClientDoc = _ReportDoc.ReportClientDocument;
      public string ReportFileName
         get
            return _ReportFileName;
      public ReportDocument ReportDoc
         get
            return _ReportDoc;
      public ISCDReportClientDocument ClientDoc
         get
            return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?

Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+           * the following two string values can be modified to reflect your system+
+          ************************************************************************************************/+
+          string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb";    // path to xtreme.mdb file+
+          string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+          // Dataset+
+          OleDbConnection m_connection;                         // ado.net connection+
+          OleDbDataAdapter m_adapter;                              // ado.net adapter+
+          System.Data.DataSet m_dataset;                         // ado.net dataset+
+          // CR variables+
+          ReportClientDocument m_crReportDocument;          // report client document+
+          Field m_crFieldCustomer;+
+          Field m_crFieldCountry;+
+          void CreateData()+
+          {+
+               // Create OLEDB connection+
+               m_connection = new OleDbConnection();+
+               m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+               // Create Data Adapter+
+               m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+               // create dataset and fill+
+               m_dataset = new System.Data.DataSet();+
+               m_adapter.Fill(m_dataset, "Customer");+
+               // create a schema file+
+               m_dataset.WriteXmlSchema(xsd_path);+
+          }+
+          // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+          // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+          void AddDataSourceUsingDataSet(+
+               ReportClientDocument rcDoc,          // report client document+
+               System.Data.DataSet data)          // dataset+
+          {+
+               // add a datasource+
+               DataSetConverter.AddDataSource(rcDoc, data);+
+          }+
+          // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+          // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+          // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+          // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+          // above.+
+          void AddDataSourceUsingSchemaFile(+
+               ReportClientDocument rcDoc,          // report client document+
+               string schema_file_name,          // xml schema file location+
+               string table_name,                    // table to be added+
+               System.Data.DataSet data)          // dataset+
+          {+
+               PropertyBag crLogonInfo;               // logon info+
+               PropertyBag crAttributes;               // logon attributes+
+               ConnectionInfo crConnectionInfo;     // connection info+
+               CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+               // database table+
+               // create logon property+
+               crLogonInfo = new PropertyBag();+
+               crLogonInfo["XML File Path"] = schema_file_name;+
+               // create logon attributes+
+               crAttributes = new PropertyBag();+
+               crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+               crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+               crAttributes["QE_ServerDescription"] = "NewDataSet";+
+               crAttributes["QE_SQLDB"] = true;+
+               crAttributes["QE_LogonProperties"] = crLogonInfo;+
+               // create connection info+
+               crConnectionInfo = new ConnectionInfo();+
+               crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+               crConnectionInfo.Attributes = crAttributes;+
+               // create a table+
+               crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+               crTable.ConnectionInfo = crConnectionInfo;+
+               crTable.Name = table_name;+
+               crTable.Alias = table_name;+
+               // add a table+
+               rcDoc.DatabaseController.AddTable(crTable, null);+
+               // pass dataset+
+               rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+          }+
+          void CreateReport()+
+          {+
+               int iField;+
+               // create ado.net dataset+
+               CreateData();+
+               // create report client document+
+               m_crReportDocument = new ReportClientDocument();+
+               m_crReportDocument.ReportAppServer = "127.0.0.1";+
+               // new report document+
+               m_crReportDocument.New();+
+               // add a datasource using a schema file+
+               // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+               // for more information, refer to comments on these methods.+
+               AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+                              +
+               // get Customer Name and Country fields+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               // add Customer Name and Country fields+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+               // view report+
+               crystalReportViewer1.ReportSource = m_crReportDocument;+
+          }+
+          public Form1()+
+          {+
+               //+
+               // Required for Windows Form Designer support+
+               //+
+               InitializeComponent();+
+               // Create Report+
+               CreateReport();+
+               //+
+               // TODO: Add any constructor code after InitializeComponent call+
+               //+
+          }+//=========================================================================

Report based on Procedure

Hi All,
I have a discoverer report based on a function, function is executed and insert the Data into Global Temporary table. When I try to execute the Function in one Discoverer TAB and Display the Data by SELECTING FROM Global Temporary table in another Discoverer TAB, Data is displayed but when I try to execute the function from same Discoverer TAB and try to select the data, it displayes no rows.
Please let me know how to accomplish this in one discoverer sheet instead of TWOS..
Thanks

Hi All,
I have a discoverer report based on a function, function is executed and insert the Data into Global Temporary table. When I try to execute the Function in one Discoverer TAB and Display the Data by SELECTING FROM Global Temporary table in another Discoverer TAB, Data is displayed but when I try to execute the function from same Discoverer TAB and try to select the data, it displayes no rows.
Please let me know how to accomplish this in one discoverer sheet instead of TWOS..
Thanks

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
 IF i_step = 1.
 <check for condition -- if successful, variable flag = 1, else variable flag = 0>
 IF flag = 0.
 MESSAGE e157(00). "Error Message
 ENDIF.
 ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

How to create a report based on the selection of a node of a tree

Hello,
I am new to Oracle Apex and I was trying to build a tree and also an interactive report based on the empno column of the emp table.
I have created a tree based on emp table. Now I want to display records of the employee selected in the tree.
Here is the tree query:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"ENAME" as title,
null as icon,
"EMPNO" as value,
null as tooltip,
null as link
from "#OWNER#"."EMP"
start with "MGR" is null
connect by prior "EMPNO" = "MGR"
order siblings by "ENAME"
Can anyone tell me step by step how to go from here?
I tried to follow the thread Re: tree question but could not understand much from it.

The approach for reloading the page and displaying the report is quite simple.
<li>You start by creating a new page item which would be used to store the selected node ID , eg. P100_SELECTED_NODE (you can make it atext item and change it hidden once everything works as expected)
<li>Modify the tree query and change the link column in the tree definition SQL query to a link to the same
for example if your page is 100 , you would make the tree node link to the same page but set the P100SELECTED_NODE with selected node's id_
This done here
{message:id=4410987}
In this case it would be
'f?p=&APP_ID.:100:'||:APP_SESSION||'::::P100_SELECTED_NODE:'||EMPNO as link Now when you click on a tree node link , it would come back to the same page, but set the P100_SELECTED_NODE with the empno of the clicked node.
<li> All that is left to do, is changing your Report so that it refers to the new item inorder to filter the records for this employee i.e empno
SELECT ...
WHERE empno= :P100_SELECTED_NODE

BI Report based on Age bands?

Hi all,
I need to create a simple OBIEE report on the sales made by sales persons based on the age band:
Eg:
Sales Person Sales
Age 25 - 35 --> 30000 units
Age 36 - 45 --> 10000 units
Age 46 - 55 --> 5000 units
Age 56 - 65 --> 20000 units
I have the "*Date_ of_Birth*" field in the SalesPerson_Dimension and the No_units_sold by a sales person in the Fact table.
My big question is how to create Age Bands in OBIEE?
Appreciate your help.

You create a logical collumn 'Age Band' in a Logical Dim table. Use whatever physical table is holding your DOB columm as the LTS for this dimension. For the mapping to the LTS do something like :
CASE
WHEN TIMESTAMPDIFF( SQL_TSI_DAY , CURRENT_DATE , physical_table.dob_column) <= 20 THEN '0-20'
WHEN TIMESTAMPDIFF( SQL_TSI_DAY , CURRENT_DATE , physical_table.dob_column) <= 30 THEN '21-30'
ELSE '100+'
END
You really want this field in a logical dim as you typically want to group by it. If the DOB column is in a fact table dont worry, just use that fact table as the LTS table and do the ususal complex join for this dimension to the fact as normal in the BMM layer.
Dont forget a hierarchy, good practice even if no true levels, Total -> Detail with your age band as the detail. Also dont forget your content levels in the LTS content tab.
So all the logic for assigning the bands is performed on each row.
If your having probs let us know !
Cheers
Alastair

1 Conditional report based on 3 select lists/ 3 different select statements

I have made 1 report based on the three select lists. The report is displayed in the center of the page. The user needs to fill them in order, the select lists are:
Selectlist:
1. P1_LOVPG - Null is allowed, but is only appearing at top with a label of Productgroup
2. P1_LOVSG - Null is allowed, but is only appearing at top with a label of Subgroup
3. P1_LOVMA - Null is allowed, but is only appearing at top with a label of Manufacturer
LOVPG contains a distinct collect of the ProductGroups
QUERY LOV = select distinct pg from X
LOVSG contains a distinct collect of the SubGroups inside the selected PG.list
QUERY LOV = select distinct sg from X where pg = :P1_LOVPG
LOVMA contains a distinct collect of the Manufacturers inside the selected SG.lst
QUERY LOV = select distinct ma from X where sg = :P_LOVSG
Based on the the selected items the user would see the following:
Table X
PG SG MA ART
A-----X----M---1
A-----X----N---2
A-----Y----M---3
A-----X----M---4
B-----X----M---5
B-----Y----N---6
B-----Z----O---7
Seletion 1 PG = A -> selects PG A in select list result, User sees:
Report A
PG SG MA ART
A-----X----M---1
A-----X----N---2
A-----Y----M---3
A-----X----M---4
Query would be: select * from X where PG = :P1_LOVPG
Selection 2, user still sees the above, can only select from the SG select list NULL, X, Y. User needs to choose between X or Y value. He picks X, he sees:
Report B
PG SG MA ART
A-----X----M---1
A-----X----N---2
A-----X----M---4
Query would be: select * from X where PG = :P1_LOVPG and SG = :P_LOVSG
Selection 3, user still sees selection 2 on his screen, can only select from the MA list bewteen NULL, M or N, user needs to choose between M or N. He picks M, he sees:
Report C
PG SG MA ART
A-----X----M---1
A-----X----M---4
Query would be: select * from X where PG = :P1_LOVPG and SG = :P_LOVSG
As you can see the query changes as the user goes deeper into the structure. It is a simple if then else system where the quey changes. How do I set this up in htmldb?
(I've read something about Oracle's SQL and it's decode function, but can they be used with changing select statements?)

are you sure your data meets the JOIN conditions?
You can make a quick check.. only example...
select single * from KONP into ls_konp
where knumh = P_knumh.
if sy-subrc eq 0.
select * from from A905 into table lt_a905 where
     kappl in so_kappl
     and kschl in so_kschl
     and VKORG in so_vkorg
     and vtweg in so_vtweg
     and kondm in so_kondm
     and wkreg in so_wkreg
     and knumh = ls_konp-knumh.
if sy-subrc eq 0.
select * from A919 into table lt_a919
for all entries in lt_a905
where kappl = lt_a905-kappl
and kschl = lt_905-kschl
and knumh = lt_905-knumh.
endif.
endif.

Restrict 'Executing report in background' from selection screen

I want user to not to select option for executing report in background from Selection Screen of the program.
i.e. 'Execute Program in Background' option in 1st menu bar tab should either be disabled OR if user clicks on it then he should get error message on selection screen itself.
Thanks,
Falguni

Hi Falguni,
Write the code based on function code SJOB in the event AT SELECTION-SCREEN. Write the following code :
AT SELECTION-SCREEN
CASE SY-UCOMM.
WHEN 'SJOB'.
MESSAGE E000 WITH 'You cannot schedule background job'.
ENDCASE.
Thanks & Regards,
Faheem.

Creating report based on user selected Date Range

Hello.
I am trying to display an Apex report that selects data for the report based on a user entered date range.
It's a simple page with two date picker fields (p18_start and p18_end).
The report region SQL looks like this:
SELECT *
FROM prj_items
WHERE LM_DT BETWEEN :p18_start AND :P18_end
One table, one field on the table to search and two Apex variables.
I thought this would be fairly simple, but I am obviously missing something.
I not even sure what other information is needed to help me figure this out.
-Jody

Hi,
You can set defaults for the datepickers if you need to - this could be done in a computation on the page for each item and conditional on the item being null.
When I've done something similar to this, I've created two hidden page items - eg, :P19_FIRST_DATE and :P19_LAST_DATE and populated these with the earliest/latest date that the user could reasonably select (perhaps, in your case, the MIN(LM_DT) and MAX(LM_DT) values).
Then your SQL would be:
select * from PRJ_ITEMS
where LM_DT BETWEEN TO_DATE(NVL(:P19_START,:P19_FIRST_DATE), 'DD-MON-YY')
AND TO_DATE(NVL(:P19_END,:P19_LAST_DATE), 'DD-MON-YY')If you don't want to set default dates, you could do something like:
SELECT * FROM PRJ_ITEMS
WHERE (:P19_START IS NULL AND :P19_END IS NULL)
OR (:P19_START IS NOT NULL AND :P19_END IS NULL AND LM_DT >= TO_DATE(:P19_START,'DD-MON-YY'))
OR (:P19_START IS NULL AND :P19_END IS NOT NULL AND LM_DT <= TO_DATE(:P19_END,'DD-MON-YY'))
OR (LM_DT BETWEEN TO_DATE(:P19_START,'DD-MON-YY') AND TO_DATE(:P19_END,'DD-MON-YY'))There are various reasons why your two dates are being cleared when the page is reloaded. Firstly, you should check the branch that returns to the same page - make sure you are not clearing the cache for the page. Then, have a look to see if there is a "reset page" process (usually created for you when you create a form page). Then, check the Source settings for the items. Typically, these would be "Only when current value in session state is null" and a Source Type of "Static Assignment" with the "Source Value or Expression" left empty.
Andy

Inserting paragraphs into a report based on a certain condition

Hi, I need some advice on the best method to insert paragraphs of text into a report.
I have +/- 100 paragraphs which are in text format, I need to insert these into the report based on certain conditions.
I have tried entering them into the trailer section one after the other and using conditional formatting to display them if the the condition is met. This works well but I ran out of space in the trailer section.
I then thought of saving the paragraphs somewhere on the server as seperate txt files and inserting them into the report using file links,
or I could put these paragraphs into a table and then insert them from there, some of these paragraphs are longer than 4000 characters,
Please advise on the best method
Thank you
Michael

Hi,
If the button and the textfield are on in the same subform then this code should work in the click event of the button
(This is JavaScript code so make sure the code is set to JavaScript and Client on the drop downs in the script window)
(assuming the name of the textfield is TextField1)
TextField1.rawValue = "some value";
If they are in different subforms then you have 2 options
Please note in both these options it is easier if the subforms have names ( I am assuming this to keep samples simple)
option 1 -
use the parent object to move up the tree till you are at the same level as that of the subform that contains the textfield
e.g.
(Click Event of the button)
this.parent.subformname.TextField1.rawValue = "some value";
option 2 -
Use the resolve node to make your way down from the top level of the form
xfa.resolveNode ("form1.subformname.TextField1").rawValue = "some value";
Hope this helps
Malcolm
p.s. I am making assumptions as the image/file you attached did not appear for me.

Select in (select ...) (select main report based on child records)

I have a Crystal Report XI rel 2 report but I need to narrow the search of the main report based on records in the child table. I have 3-tables and one report w/ a subreport. The tables are locations, crashes, and vehicles. The main report has the tables locations and crashes and the subreport has vehicles (one crash has 1 to n vehicles) How do I select records in the main report based on the child (see below SQL stmt.) SELECT locations.county, locations.state, crashes.numpeople, crashes.time FROM locations,crashes WHERE crashes.cid IN (SELECT cid FROM vehicles WHERE vehicles.vehicletype = 'Trailer'); 

Hi,
Â You can use common shared variables to share data between a sub report and the main report.
What Kathryn has suggested is correct but you must make sure that the sub report is run first and then the main report is executed.
Â Hope this helps
Â Cheers
Â Sam

Execute query based on LOV

Hi,
Is there a special code to execute query based on selecting one of the options by the user in the LOV???? or it is as simple as the following???
Set_Block_Property('PAYMENT_VOUCHER',Default_Where,'payment_method=:PAYMENT_VOUCHER.payment_method'); >>>> in the search button trigger(WBP):::
Execute_Query;
Note that the payment method field has a LOV...

Tasneem wrote:
ok..
I tried to set this thread as answered but cannot!!!! believe me...None of answer you get as Helpful or Correct. ???
You should read...Before posting on this forum please read

Simple Executable Report based on SD

Similar Messages

Maybe you are looking for