SimplePass not fully working with IE 11

HP DV7 6143cl Windows 7 Home Premium 64 bit recently updated IE from 9 to 11.
I bought the laptop mid 2011and did not get around to looking at the fingerprint reader until the end of that year. I used it briefly but with very few passwords I un-enrolled my fingerprints and let it sit idle.
Recently I decided to use it again but it was dead.
I installed the Validity Fingerprint Sensor driver sp55109.exe and HP SimplePass Identity Protection 2011 sp54680.exe. Upon restart it took me though the fingerprint enrolment process and started working.
The first driver is the actual sensor and the second is the management software, correct?
Very recently I updated Internet Explorer from 9 to 11 and the SimplePass stopped working again. So I repeated the above steps but only overwrote the existing drivers.
It started working again in that I can logon the laptop with a fingerprint and I can assign a website to an enrolled fingerprint to launch but it is no longer asking me if I want simple pass to save passwords.
Could this be related to IE 11?.
I read Dragon Fur's tutorial on SkyDrive: Simple Instructions to Upgrade HP.
Should I try again after I delete the existing fingerprint driver?
I the tutorial mentions an very new driver sp63224 HP SimplePass V6.0.100.276 Win7-8
Would this driver help or am I just overlooking something else as it partially functions?
This question was solved.
View Solution.

The newer SimplePass adds better compatibily with newer browsers.Will it solve all of your problems? Possibly, but either way it can't hurt.
There is also a newer Validity you might want to try.
Validity:
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56403.exe
SimplePass:
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63224.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

Mini display Port To HDMI not fully working with tv

Ok So, I am using and 13" macbook Pro Alu (march 2009) and a 40" Samsung LED 120hz 1080p screen (Brand spankin New!). I am connecting the two between a dynex mini Display port adapter to HDMI out. Then have an HDMI cable Running from the adapter to the TV.
My Problem:
When i connect the two together The output to the TV doesn't Fit the whole Screen. There is about a 4 inch Gap on the sides that are just black and about an 1 1/2 inch gap on the top and bottom. This was how it was on my old tv and was hoping it would just work better on the new tv. The old tv was 720p 32 inch toshiba. but it is very frustrating because i use ableton and it defeats the purpose of having such a large display if it doesnt work properly. ive read a couple forums that were similar but non were the exact problem nor the right solution. I downloaded switchresX and it gives me higher resolutions to output but it does not change the gap. Im starting to think it may be a setting on the tv but i have yet to find anything that with fix it on either the settings on the TV nor the computer. please help thank you

When you're in Extended desktop mode (not mirror), and you Open System Preferences > Display, there should be a preference on your main screen and one on the TV. The one on the TV should have the underscan setting like this:

Search function not fully working with Exchange 2007 and Outlook 2007

The Search function in outlook is partly available.
I can only search into the inbox with basic search.
Advances search functions an dsearching into subfolders is not available.
As you can see in the screenshot, the options are greyed out.
Situation:
W2k8R2 + Exchange 2007 (windows search role not installed)
W2k8R2 + Outlook 2007 (windows search role not installed)
Question:
- Does the search role need to be installed on the exchange server to provide full search functionality?
- Does the search role need to be installed on the client (server) to get the search funtion fully available in Outlook?
I can't find this awnser if I search in google of technet, so hope someone can help me with this.

As I already wrote to you, the current forum is for developers. I'd recommend asking non-programming questions in the
Outlook IT Pro Discussions forum instead.

6234 does not fully work with iSync on a Mac

Hello everybody,
i bought a Mac and found out that the nokia 6234 is not supported via iSync. What can i do?
Shouldnt the 6234 be similar to the 6230?
Thanks for any help...
Gery

Hi auusieknight44
Have PM you link sent before although I did not get feedback as to it's usefulness.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
What's wrong? Any idea?
Thanks

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

I downloaded iMovie 11 butit seems not to work with IDVD6. Do I need to get the Newest IDVD? Which IDVD is the latest and where do i download it from?

I downloaded iMovie11 but it seems not to work with iDVD6. Do I need to down load the latest IDVD?

Where do I download it from?
You need to use iDVD 09 or iDVD 11. These are only available on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
If you live in a state where Amazon collects sales tax you may prefer the link below.
http://dealmac.com/lw/artclick.html?1,527850,1872219

What to do if black berry bold 9900 contacts not fully syncing with macbook pro?

what to do if black berry bold 9900 contacts not fully syncing with macbook pro?

thanks for the advice
I have an I phone 4S that is having almost the same problem, and only some of the newly added contact of the phone are added to the address book, so not a big difference, and its not a solution to get read of all products only because we use apple.

UCS MP for Microsoft Ops Mgr R2 not fully working - can anyone help?

Hi, I'm responsible for Ops Mgr in our Organization and we have recently deployed a large UCS installation. I have just installed the management pack as per the Quickstart guide, but unfortunately I have had some problems getting it to discover/monitor properly (even before I get a chance to do any tuning of alerts).
Intially after install, in diag view the following 5 nodes appeared but NONE where being actively monitored (empty circle beside icon) for HW Inventory,Hypervisors,Operating Systems,Service Profiles,Virtual Machines. (Note i had installed the VMM MP as prereq for monitoring virtual machines). After a bit of play with the RunAs account/Profiles and trying to add in virtually all relevant UCS classes, I have now go 2 out of the 5 nodes being monitored, ie HW Inventory and Service Profiles (I had used overrides to reduce discovery to 5mins (as per quickstart guide) to quickly get the objects discovered. This is all I am getting, I cant get the other 3 nodes discovered/monitored at all!!
I was wondering if anyone else has successfully installed this MP and got it fully working - if so I'd love to hear from you and see if I can get mine working as it would be great to add value to our monitoring solution. Any help much appreciated!!...
Cheers

Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
(alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
the computer was in normal mode then it can be disregarded.
You will find some general advice on interpreting Event Viewer reports here:
http://www.gerryscomputertips.co.uk/syserrors5.htm
Hope this helps, Gerry

My MacBook Pro speakers are not fully working.

The speakers work, but not fully. The sound seems very far away, like they are only partially working. They go in and out of fully working and then suddenly they will switch to sounding far off. The headphone jack works just fine.
Help! The computer was bought in 2011 and the internal systems were replaced in 2012 from water damage and the hard drive was replaced last spring.

Try zapping the PRAM.
Check out Boom

BEWARE - 7toX DOES NOT yet WORK with PAL (50HZ)

Philip Hodgetts wrote:
It is neither "shambolic" nor "amateurish" but rather simply unfortunate that one CCIR format was not correctly identified.
Sorry Phillip - I think it's shambolic and amateurish that a week on down the line, you still have not stated on your website, and Apple have not stated on the App Store that this thing (by your own admission) DOES NOT WORK WITH PAL.
http://assistedediting.intelligentassistance.com/7toX/about.html#before_exportin g
Absolutely no mention of it in the 'Known Issues' section, so presumably you're not 'extremely sorry and somewhat embarrased' quite enough to actually warn people that they shouldn't buy it until the patch appears on the App Store.
If you were in the UK, you could be prosecuted under Consumer Law.
Andy

Patrick, I'm not complaining about the bug itself, I'm complaining about the catalogue of mis-information and/or non-information.
Yes, I defended Apple over the utter shambles that is FCP X - a sensational application released at least six months too early.
In my original thread, I said that I blamed Apple as much as Intelligent Assistance for this - does nobody at Apple actually test software before they display it on their website?
To be honest, I'm up to here with Apple - and if todays fresh install of Lion doesn't bear more fruit than the one I did two weeks ago, I'm seriiously thinking (for the first time in ten years) of buying a PC (although the thought fills me with dread).
I applaud Philip and his colleagues for doing what they're trying to do, but I wish they - and Apple - had done the whole thing more professionally.
That's all I'm going to say on the matter, now I'll keep quiet and hope to goodness they get 7toX working soon because if it takes too long, I could well be struggling with a PC instead of a Mac.
Andy

Roboform 7.x does NOT YET work with Firefox 7. Update coming soon says Roboform

I just called Roboform (09/27), they said their programmers are scrambling to get their software to work with the new FF7. I can't update until then. I didn't see anything else on the net yet about this question, even Roboform's site didn't have a comment about it yet. Just an FYI, hopefully in the next few days.

help.................I lost all RF passwords when upgrading the FF 7.0.1 on Oct 5th. I see the links about but when I get there still don't know what to do, not very computer literate and hate RF as this always happens with upgrades. got to be a better way as this is the third time in as many upgrades.
If anyone can help me I would appreciate it
Thank you

ITunes not respecting / working with Socks5 configuration

iTunes (and Safari) are not working with a socks proxy set. What is strange is that iChat does work well with it.
What gives? Has anyone been able to get iTunes working over a Socks5 proxy?

Just in case, I would try this: http://docs.info.apple.com/article.html?artnum=304424
If that fails, and you still get no sound from the computer at all, you'll want to talk to your computer support, as that would mean you may have a sound driver problem.

CMIS Mount not correctly working with Mavericks

Hi.
I have recently updated my system to MAC OS X Mavericks (10.9) and Adobe Drive to Version 5.0.1. I am using CS6.
I updated from CS5, Drive 3 and Mac OS X 10.6.
The problem is as follows: The volume mount name is wrong and the permissions are wrong!
When i connect the CMIS volume (an alfresco 3.4 community dam) with Drive 5 the volume is mounted in Mac Finder as "cmis". Instead of my custom volume mount name "MyCustomVolume". I defined the custom name in Drive as well as in Alfresco CMIS-Config. And it worked flawlessly before updating. But i need the volume to be mounted as "MyCustomVolume" and not as "cmis".
The strange thing is: If i run the terminal and have a look at "~/Volumes" i can see, that there is a volume "dr-x------@ 1 myusername nogroup 0 20 Nov 15:22 MyCustomVolume" mounted. And no volume "cmis". So where does this "cmis" come from?
Needless to say, that my file linkings e.g. in InDesign documents are related to the old mount name and not to "cmis". Currently every file i open will have broken links.
And there is another issue: The "cmis" volume is "readonly" and not writeable. Using the Finder i am not able to change any of the cmis mount properties.
Actually i am wondering whether it is a Drive or a Mavericks issue. I posted this issue in the Adobe Forums as well.
I already tried this:
- Several Adobe Drive reinstallations, Adobe Drive Cache/Setting clearings as well as Mac OS Disk Utility permission repairs.
- Deactivated Sophos Antivir
- Uninstalled MacFuse and Tuxera NTFS
The problem is critical for me because my daily work depends on a seemless cmis integration.
So i hope for some help.
Best regards
Volker

You are correct: it does not on Mavericks. It was released many many years ago, replaced by Logic Pro 9 and Logic Pro X, doesn't support 64-bit, etc. It is very old software, that doesn't work with the latest OS X version. Not a total surprise...

Airplay does not always work with Apple TV (no airplay symbol)

We have two iPhones and one iPad (all using iOS6). Sometimes we can connect any device without problems, sometimes the Airplay symbol does not appear on the iPhone or iPad at all. Rebooting (unplugging and plugging again power cord) the Apple TV sometimes helps. Anyhow, I checked all hints from the Apple FAQ and the only thing I don't use is iOS 7 (but currently iOS 6 should still be ok).
Does anybody made the same experience?

This morning I downgraded the firmware of my Apple TV to 5.3 (I was on 6.0.2). This solved my problem! :)
I too had lagging playback, both from iTunes as well as for Airplaying a video from my iPad. Often the video or airplay just would not start.
With firmware 5.3 my ATV is again as fast as it used to be: videos start promptly, no waiting for the spinning disc and hoping the thing will start. It just works now :)

Memory not fully working on MSI P965 NEO

I've build a new computer and everything is working fine exept for the DDR2 memory.
Specs
- MSI P965 Neo, bios 7235ims v1.5
- Memory, 2x 512 Mb PQI, Dual channel DDRII, 533
- Intel core 2 duo, 6400
When starting it only reports 256Mb of RAM memory.
I've tried putting the memory in the different dimms and in all combinations. This makes no difference.
Any help to get the full 1Gb will be greatly appreciated.
M

When I put in just 1 module, doesn't matter which one, and into which socket, the computer runs, but there's no screen. So it doesn't work with just one.
I upped the voltage to 2.0V and manually put in the timing. No difference at all.
Also I ran Memtest, and it displayed 255M of memory, and an error using test nr 4. When I did the specific memory tests on test 1 it said 255M, test 2 showed 621M and than freezed with lots of errors, and test 3 freezed immeadiatly.
So can I conclude the memory is broken or can Memtest not handle this memory.

SimplePass not fully working with IE 11

Similar Messages

Maybe you are looking for