UCS MP for Microsoft Ops Mgr R2 not fully working - can anyone help?
Hi, I'm responsible for Ops Mgr in our Organization and we have recently deployed a large UCS installation. I have just installed the management pack as per the Quickstart guide, but unfortunately I have had some problems getting it to discover/monitor properly (even before I get a chance to do any tuning of alerts).
Intially after install, in diag view the following 5 nodes appeared but NONE where being actively monitored (empty circle beside icon) for HW Inventory,Hypervisors,Operating Systems,Service Profiles,Virtual Machines. (Note i had installed the VMM MP as prereq for monitoring virtual machines). After a bit of play with the RunAs account/Profiles and trying to add in virtually all relevant UCS classes, I have now go 2 out of the 5 nodes being monitored, ie HW Inventory and Service Profiles (I had used overrides to reduce discovery to 5mins (as per quickstart guide) to quickly get the objects discovered. This is all I am getting, I cant get the other 3 nodes discovered/monitored at all!!
I was wondering if anyone else has successfully installed this MP and got it fully working - if so I'd love to hear from you and see if I can get mine working as it would be great to add value to our monitoring solution. Any help much appreciated!!...
Cheers
Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
(alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
the computer was in normal mode then it can be disregarded.
You will find some general advice on interpreting Event Viewer reports here:
http://www.gerryscomputertips.co.uk/syserrors5.htm
Hope this helps, Gerry
Similar Messages
-
I was changing my desktop screen saver in system preferences>screen protection. Now it says it is "Loading Images" and won't stop. The Colourful wheel goes around for ever and It does not stop. Can anyone help me?
Welcome to the Apple Support Communities
I have seen a lot of cases like your issue, and it's easy to solve.
First, open Disk Utility, select Macintosh HD in the sidebar and repair permissions. Sometimes, a permission can be damaged and it makes that an application doesn't work properly.
If that doesn't work, open Finder, select Go menu > Go to Folder, type ~/Library/Prefereces, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist" and restart -
I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?
ebony --
So, when you open your main Applications folder, there is no Office app there?
It's in your Users>Applications folder? -
When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?
gonsa47 wrote:
When I open it in pages or word the correct company logo appears.
Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
So, I would say that the mail app cannot differentiate between hidden and non hidden items -
I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.
First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal. -
I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
can anyone help?Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix. -
Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?
Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
IPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?
iPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?
While we all have MacBooks in this forum not all of us use iPhoto. There's an iPhoto Support Community where everybody uses iPhoto. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/iphoto
-
I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?
I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
I was told I could sync my music on my pc with my ipad2 by an apple agent. I hooked my ipad2 up to my pc and did so, but now I can not open any of my apps on my ipad2. when I try it just flickers and does not open. Can anyone help?
On you iPad, force close all the Apps in the multitask window.
Follow these steps to force an app to close:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it on by one until all cleared
Now do a Soft reset of your iPad:
Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, try your Apps again and see if this resolves the issue. -
When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?
Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox. -
I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???
You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.
-
I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?
Are you trying to get an upgrade before you're actually eligible? If that is the case, it doesn't matter if you've been a customer for 6 years or 6 days...if you're not eligible then you're not eligible. Some of your possible options are to pay full retail, do an early edge up (if you are eligible for that option), or buying a phone from some other source to use.
If your situation is something different then it might help to share that. The options may still be the same but it helps to know what exactly the issue is.
Maybe you are looking for
-
Firefox closes existing window when you open and close a new window
When I'm using firefox and need to open a new window (or a website opens a new window) and I'm done with that new window and close it, Firefox attempts to also close the previous window that I am using. I've tried reinstalling, but other than that I
-
Hi all, This is my first time using this discussion site! Any help would be great, as I am getting very frustrated with pages! What I am trying to do is link text at the bottom of a document to a page at the beginning of the document. I can't find a
-
Connect to EBS using an external URL
Hello I have a EBS 12.1.3 installation on Linux 64 bit all on a single server and I have been asked to make this available via an external IP and URL (server.mydomain.com). I would like to keep the current systems internal IP hostname and domain (ser
-
I have an external harddrive and I'm using Time Capsule to back it up. I looked through the contents and see the applications, but how do I know if all my pictures on iphoto or videos from idvd are there? I can't see them.
-
Hello , I defined copying control from opportunity to quotation, It works fine but I need to copy items from opportunity to quotation more than once. Now if item was copying once from opportunity to quotation system doesn't allow me to copy this item