Simulation of Business Content

Hi,
While installing the business content,I have simulated and in the simulation install I have seen some objects in red.For some objects the error message is <b>" The object is not avilable in version A"</b>What will the effect and how to install those objects.
Do I need to go to that particular object and activate.
Pls help me out..

Hi,
Thanks for the reply..
If I want to install an object which is in red-- How to go with it?
Say I have 100 objects in a cube and among them 15 are showing red in the simulate installation..and I need to install those 15 also...
Can I first install those 15 first?
If want how to install them...Can we install an object Ex Info Object which is in red...
Waiting for the reply..

Similar Messages

  • Error while loading external data using Business Content

    Hi,
    I am new to BW and I'm stuck up with this problem.
    I'm trying to load data from external file using business content cube(0PUR_C01)and infosources(2LIS_02_ITM/S012/SCL).
    I first installed the above mentioned cube and data sources.
    Then I activated the update rules and transfer rules, without any changes.(I don't know what changes might be required!)
    Monitor is showing successful load but the cube has 0 enteries.
    Even the simulation of update is showing data in the data target.
    Can someone please guide me through this ?
    Its really urgent....
    Thank you all in advance.

    Hi Sharmistha,
    Welcome to SDN !! Does your monitor shows any records extracted till PSA ? Go to the details tab -> processing and click on each node to check what monitor shows.
    Hope it helps.
    Thx,
    Soumya

  • Error while activating Business Content

    Hi!
    I'm trying to activating a BC ODS.. but when I run the installation simulation I get the following error message:
    "InfoObject 0KN_USE is not available in version A"
    I've marked the infoobject 0KN_USE to be installed..
    Any ideas of how to proceed?
    BR
    Bjørn

    Maybe that infoobject existed before in inactive version, check it and activate manually, after that activate business content version

  • Error during activation of business content

    Hi
    I am facing problems during the activation of the standard business content.
    I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
    while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
    infoobject XXX is not available in version A
    Error when reading data target XXXX
    Data source XX not mantained
    Key figure XXX is not available in version D
    In order to avoid activating pre-installed objects i have deselected them.
    I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
    thanks in advance!

    Hi Everyone!
    Thanks the responses have been encouraging and i do see a glimmer of hope
    since i am fairly new at this I wanted to know
    1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
    2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf  and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
    thanks in advance!

  • Business Content Activation of business partner

    Hi,
    I am activating standard business partner from business content.The business partner we have right now is of version 3.3/01 and has lot of custom fields. When I am activating the version 3.5/03 I want to make sure I don't lose those custom attributes and also want to know how this will impact the cubes,ODS,Infosets,Update rules,Transfer rules, queries etc associated with this InfoObject. Can anyone please help me out with this issue.
    Also while trying to simulate installation of an InfoObject,it ends up with red light. It gives me a message that one of the attributes in the latest version is a navigational attribute and the older version it was a display attribute.Hence while simulating I check both the install and match/copy box so that I can transfer the selections without having to make it navigational but end up with the red light. Is it advisable that I go ahead with installation or how should I go above it.
    Thanks,
    Kal

    Kal,
    when you activate the new version , the version is changed from M to A and the new business content would become the active state...
    But then since the old BPartner IOBJ is being used in ODS.. cubes etc , I am not sure if your Business COntent installation can proceed since there is master data as well as the same being used across BW.
    You could try a merge instead to see if he new fields as part of the new business content is carried over.
    Hope it helps.
    Arun
    Assign points if useful

  • BI 7 Service Management Business Content

    Hi Fellows: I've never worked with Service Management. I was asked to put together all the names of Standard Business content Infocubes and Queries. I was told by one of the R/3 consultant that I would find those cubes and Queries under QM since the data was to come from Plant Maintenance. Is that right? He listed the following cubes for me to look into
    Notifications: 0QM_C10
    Notifications - Activities: 0QM_C07
    Notification - Tasks: 0QM_C08
    Notifications - Items: 0QM__C09
    Notifications - Causes: 0QM_C06
    Service Orders - OCS_C02
    Service Orders - Operations: OCS_C03
    Service Orders: Costs and Allocation: 0CS_C01
    Simulated Maintenance Costs: 0PM_C05
    Budget Data for Plant Maintenance (Transactional): 0PM_C06
    Plant Maintenance Budget Data (MultiProvider): 0PM_MC01
    Any help would be greatly appreciated and points rendered for sure. Thanks
    B

    Ravi (or anyone else who can answer this in case Ravi is busy): thanks again for answering the questions. I right clicked the infocube 0QM_C10 in the 'BI Content' section and selected 'Display Description'. I then get the detailed metadata of the infocube. Perfect so far. I then click on the link that says 'Network display of the data flow', where I get the detailed data flow and its wonderful. The only issue is that the DataSources listed in the diagram are not listed as the datasources for the Customer Service DataSources in help.sap.com. Any reason for that?
    Does that mean I need to activate all the datasources and infoobject for QM and Customer Service under Production Planning?
    Hope I didn't confuse you. Thanks again.
    P.S. for Sayed: if you get a little white blank screen then just maximize it and wait for a short while. Also see if you can scroll up or down. The diagram might be hidden.

  • Business content-Personnel Cost Planning

    Hi, expert
    Now, our clients work in HR dept. wants to do personnel cost planning in BW side.
    1) is there any standard business content for Personnel Cost Planning in SAP?
    2) and if we have how to active these required BCT.
    3) Does SAP have 'personnel cost planning'  best practice? If Yes, please post useful links just about 'personnel cost planning' best practice information and documentation.
    Thanks for your kind support.

    Hello,  
    See this link for [Personnel Cost Planning|http://help.sap.com/saphelp_nw04/helpdata/en/88/b11d3ca2a25013e10000000a114084/frameset.htm] and [Personnel Cost Planning and Simulation|http://help.sap.com/saphelp_nw04/helpdata/en/13/be533dd5ce930fe10000000a114084/frameset.htm]
    See this for all [Human Resources |http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm]Related BW Information
    [Thanks|http://chandranonline.blogspot.com/]
    [Chandran|http://chandranonline.blogspot.com/]

  • Update rule could not be found during business content activation

    Dear BW experts,
    I am having an issue activating business content for an update rule (2LIS_03_BX) for 0IC_C03.  Below is a log of the error.  It seems like the system is not recognizing the update rule for some reason.  Can somebody please help shed some light on this. 
    Installation (simulation mode) of: Update Rules (UPDR)
    Transfer/Merge of the Content Version (Object Type Update Rules )
    Object Update Rules BW9VUFZSUYTTIZS0HT9I4U3RP: Installation of the Content Version
    Transfer update rules IC: 0IC_C03 / IS: 2LIS_03_BX
    Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found
    Transferring the 1 objects from type UPDR took 1.2 seconds
    Post-processing of Objects after activation
    The post-processing lasts 0.0 seconds
    Thank you.
    Andrew

    Ravi,
    Thanks for you reply.  I checked the underlying cube (0IC_C03) and the info source (2LIS_03_BX) and they are both active.  I didn't choose the option in data flow before and after because it would have brought way too much contents which I don't need.  Instead, I only activated the info source and update rule individually. All three info sources (2LIS_03_BF, BX, UM) and the info cube were successfully activated.  I am only having problem with the update rule.
    Any other ideas?
    Thanks,
    Andrew

  • Error during Business Content Installation of a query

    Hi,
    I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
    Any help on the above problem would be appreciated.
    Thanks & Regards,
    Raj

    Hi Raj,
    <i>Is the request creation for a BEx transport is different from the normal request creation??</i>
    Yes, Handling of changes to already transported Queries is different to other things of BW.
    Refer :
    http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    Re: Not able to Change or delete Query
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma

  • Error on installing infoobject catalog from business content

    while performing Install from Administrator Workbench:Business Content I am getting error.
    I am trying to install Infoobject catalog 0MMIC_CHA01 and 0MMIC_KYF01 from business content
    The error messages appearing are as follows:
    Installation (simulation mode) of: InfoObject (IOBJ)
    Checking Objects with Type InfoObject
    Checking InfoObject 0BPARTNER
    Char. 0LEGALFORM is exclusively an attribute (cannot be a navigation attribute)
    Checking InfoObject 0CM_CDT1
    Char. 0CM_HIEID may not appear in compounding and attributes simultaneously
    Characteristic 0CM_CDT1 is used as Navigation Attribute of 0RT_SEAROLL, but characteristic
    IInstallation (simulation mode) of: ODS Object (ODSO)
    Installation (simulation mode) of: Update Rules (UPDR)

    Hi
    It seems although's are warnings and not errors. Instead of using Simulation just install the content.
    check out the below article
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • Business content option and update

    hi
       can anyone say teh use of match (x)& copy and simulation result in business content in AWB.
       wht is v1 ,v2 and v3 update
    thanks in advance

    Hi Pradeep,
    Match (X) or Copy
    If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
    With the most important object types, the active version and the SAP delivery version can be matched.
    From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
    When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
    Example of an automatic match
    Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
    Example of a manual match
    An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
    The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
    The active version is overwritten with the delivery version if
    ¡ the match indicator is not set and
    ¡ the install indicator is set.
    In other words, the delivery version is copied to the active version.
    If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
    In the context menu, two options are available:
    a. Merge All Below
    The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
    b. Copy All Below
    The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
    hope this helps.
    Regards,
    Sreedhar

  • How to Install Business Content Objects

    Hi,
    1. How to Install Business Content Objects.
    2. Is there any types in Transport Request.
    Thanks,
    Madhu

    Hi,
    1. In the main menu of BI Modeling choose Data Warehousing Workbench: BI Content (Transaction RSOR). If you are already in the Data Warehousing Workbench, select the BI Content functional area by clicking on the corresponding pushbutton in the left-hand navigation window, or by choosing Goto ® Install BI Content.
    You can display or hide the left navigation window of the Data Warehousing Workbench with Navigation Window On/ Off.
    2. Collect the objects you want to activate and check your settings for activating BI Content with respect to Install, Match or Copy and Active Version Available.
    More information: Collecting Objects
    3. With Install, define how you want to install the BI Content:
    Installation Type
    Information
    Simulate Installation
    The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
    Install
    The selected objects are installed immediately.
    Install in Background
    The selected objects are installed in the background.
    Install and Transport
    The selected objects are installed immediately and then written to a transport request.
    If you have a large number of objects, SAP recommends you use the Install in Background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete.
    Make sure that when you install objects in the background, the versions are not matched. It is always the delivery version that is installed. They are not matched
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    hope it helps.
    Regards
    CSM Reddy

  • Reg. business content

    hi
    greetings.
    sahall anybody explain step by step of installing the business content.
    thanks
    regards
    sridhar
    [email protected]

    Hi Sridhar,
    In the main menu of the SAP Business Information Warehouse select BW Administration ->Administrator Workbench.
    Select the Business Content function area using the corresponding pushbutton in the left-hand navigation window or by Jump -> Install Business Content
    With the pushbutton  Navigation Window On/Off on the application toolbar in the Administrator Workbench, you can show or hide the left-hand navigation window. We assume that the navigation window remains hidden in the following section.
    If you want to assign source systems, select  Assignment Source System. The Select Source System as Default dialog window appears.
    Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
    The assignment of source systems is only relevant for transfer rules, file DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.
    If you do not select a source system, all source systems are automatically assigned.
    You can subsequently change the selection you made using  Source System Assignment .
    Change the required settings in the following selection list:
    Grouping
    Choose the objects that you want the system to consider. The groupings summarize all the objects of an area.
    Grouping
    Information
    Only necessary objects (standard setting)
    Only those objects that are really necessary for the action, that is, the transport of the selected objects, are taken into account (minimal selection).
    In data flow before
    All objects are collected that submit data to a collected object.
    In data flow after
    All objects are collected that obtain data from a collected object.
    In data flow before and after
    All objects are collected that both submit and collect data.
    If you change the default setting ( only necessary objects), the new setting will be used as a standard for the user.
    Collection Mode
    Select how you want to collect the objects:
    Collection Mode
    Information
    automatic collection (standard setting).
    The data is collected directly when the objects are selected.
    Start manual collection
    The data is only collected when you select  Collect dependent objects.
    Select an Object Type you want to transfer.
    You have various selection options in the navigation window in the Business Content function area of the Administrator Workbench.
    When you select an object type, the arrangement and selection of the existing objects are displayed in the tree structure of the central screen area as below:
    Object Type in the Administrator Workbench Navigation Window.
    Display objects in the tree structure in the central screen area.
    Data targets by InfoAreas
    List of InfoCubes and ODS objects by InfoAreas.
    InfoObjects by application components.
    List of objects by InfoObject catalog and by InfoAreas
    InfoSources by application components.
    List of InfoSources for master data and transaction data.
    Roles
    List of the standard and branch roles.
    Object Types
    List of objects by type (InfoArea, application, InfoObject catalog, role, workbook, query element, InfoSet query, Crystal Reports template, Web template, Web item, saved query view, MultiProvider, InfoCube, InfoObject, InfoSet, Classic InfoSet, ODS object, update rules, InfoSource transaction data, transfer rules, source system, InfoPackage group, InfoPackage, process chain, Reporting Agent, report/report interface, currency conversion type
    Objects in BW Patch
    List of installed BW patches including list of objects newly delivered or re-delivered with the respective patch.
    Package
    List of packages in which there are SAP objects.
    Select the object(s) you want to transfer in the central screen area and transfer them into the right-hand Collected Objects screen area by drag and drop.
    Using  Search for Object, you can also search for objects by a string (for example, 0CUST) or by pattern (for example, 0CUST_*B).
    You can display a value help for every object type: By double clicking on  Select Objects in the tree structure of the corresponding object type, the screen Value Help for Metadata appears. Select the required objects. Choose  Transfer selections.
    You can only use Business Content DataSources of a source system for transferring data in BW, when you have transferred these in their active forms and then copied them into the BW system.
    The system displays the selected object(s) and all dependent objects in the Collected Objects screen area. To reduce the time taken to access the objects when wanting to use them again, the collected objects are stored by default in the Repository Cache.
    When transferring the objects to the Collected Objects screen area, the objects are added at the same time to the tree structure of the corresponding object type in the central screen area and are saved for the respective user. This personal object list is available every time the program is restarted.
    To remove objects from the personal list, select the object in question and choose Remove Object from Display via the context menu or via .
    Objects that are listed in several tree structures are only displayed as changeable the first time they appear. Each time they are listed again, they are highlighted in gray and are not ready for input.
    Check the following columns in the Collected Objects screen area:
    The following Business Content objects are highlighted in the Transfer column by default:
    Objects transferred for the first time
    Objects delivered again in a new version from Business Content.
    When the SAP delivery version and the active version can be compared, a check box is shown in the column Compare (X) or Copy.
    There is a check mark in this checkbox by default. In this case, your version is compared with the new SAP delivery version and complimented.
    If you remove the indicator then the new SAP delivery version is copied in its entirety.
    Date symbol: The object is already available in an active version. However, the active version belongs to an older Content Release. We recommend that you adopt the new version
    Gray Selection : There is an active version in the system, but the object status is given as inactive. The object has to be subsequently edited.
    In the Active Version Available column, there are the following display options:
    Indicator
    Meaning
    No Indicator
    The object is not available in an active version.
    The object is available in an active version. You can decide whether to retain this version or adopt again.
    Change the required settings in the following selection list :
    Transfer Type
    Information
    Simulate transfer
    A test is made to see if errors are likely to occur during the transfer. The most important objects can be checked in the simulation. However, this does not include all dependent objects Therefore, only use the simulation as an orientation help to be able to recognize errors and remove them.
    Transfer
    The selected objects are transferred immediately.
    Transfer in background
    The selected objects are transferred in the background.
    Transfer and transport
    The selected objects are transferred immediately and then written to a transport request in the connection.
    We recommend Transfer in the Background, because transferring a large number of objects and especially changing already active objects can take up a lot of time.
    You can find out if errors have occurred during the installation of Business Content from a log, which you can request using the  Log pushbutton. Repair the errors in the respective maintenance transaction. Try to transfer the Business Content again.
    Hope this Helps.
    Thanks
    CK

  • Regading business content installation

    Hi,
    can any one tell me while we installing business content we have a option 'install'  in that we have 'simulate install ' and 'install',
    my question is wht is the difference btn above two options .
    Thanks in advance .
    Thanks & Regards,
    ramnaresh.

    Hi,
    Installation Type
    Simulate installation
    The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
    Install
    The selected objects are installed immediately.
    Install in background
    The selected objects are installed in the background.
    Install and transport
    The selected objects are installed immediately and then written to a transport request.
    Refer.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    Thanks,
    JituK

  • Error while activating the business content object

    Hi guru,
    We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
    So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
    but once done with the installation when i try to find the object and display it
    that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
    "_settings for material number conversion not found"_*
    so please help me out what is the problem
    Thanks

    Thanks Subash Balakrishnan for replying,
    but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
    Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
    then instead of showing me the object properties screen it gives me the error as mentioned above,
    so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
    now i hope my problem is quiet explanatory so please help me.
    Thanks

Maybe you are looking for