Since upgrade to OS5 I can't pair my apple wireless keyboad to my Ipad2

I recently upgraded my Ipad2 to O2 5 and since then it no longer recognizes my Apple wireless keyboard.  I have changed batteries on the keyboard and followed directions in the instruction book and the Ipad doesn't feel that the keyboard is within range or turned on.

Try Settings > General > Reset > Reset Network Settings

Similar Messages

  • Can't pair my Apple wireless keyboard

    My Apple wireless keyboard was working and pairing with my iMac until this morning.  I got a low battery message, replaced the batteries and the keyboard wouldn't pair.  It was recognized but wouldn't/couldn't pair (though it will pair with my iPad).  I tried to pair without a "PIN" number and now the keyboard isn't even recognized by my iMac (though still working fine with the iPad).  What's going on and how do I fix it?

    Hello:
    Try a couple of things:
    Trash a preference file (com.apple.bluetooth.plist) and restart.
    Reset the PRAM and SMC
    I am assuming you have a wired KB that works.
    Barry

  • Can't pair my apple keyboard with ipad2. Green light on the keyboard doesn't stay on. Have changed the batteries.

    I can't pair my apple wireless keyboard with my ipad2. The green light on the keyboard is not steady so I put in new batteries but still not showing a steady light.

    Hello:
    Try a couple of things:
    Trash a preference file (com.apple.bluetooth.plist) and restart.
    Reset the PRAM and SMC
    I am assuming you have a wired KB that works.
    Barry

  • I can no longer use my ipad to show Netflix on my TV since upgrading to ios7. I don't have Apple TV or airplay icon showing. What can I do to correct this problem?

    I can no longer use my ipad to show Netflix on my TV since upgrading to ios7. I don't have Apple TV or airplay icon showing. What can I do to correct this problem?

    This issue is with Netflix upgrade. I spoke to Netflix and here is the solution. Remove Netflix app from Ipad and reload the app version 5.0.1. This updated version will correct the problem.

  • Since upgrading to OS5 I know longer receive notice of incoming mail unless I actually click the mail icon.

    Since upgrading to OS5, I no longer receive notificatios of incoming mail unless I actually click the mail icon. Then it connects to the server and loads mail. Any answers?

    Go to System Preferences > iCloud and make sure your account info is correct, delete the password and reenter to be sure it is clean.  Go to Mail and then open Preferences and check the account informaiton for the iCloud account and again, delete and reenter the password for the account.  Sometimes the passwords get garbled during an upgrade.

  • Since upgrade ios  and iTunes can't access homeshare on ipad

    Since upgrade ios and iTunes can't access homeshare on ipad. I see 'share', when using music app on iPad. I click on it and then select my MacBook Pro. Circle starts goes half way the stops. My Apple TV works great. So iTunes on MacBook must be set up right.  Videos app is similar, the circle just spins and spins. My wifi is an apple airport. I beginning to think I have invested badly. I have signed out and in  again of home share on iPad and MacBook  as advised. I have read and re-read. Is there a solution?

    Hello Gary,
    Thank you for the details of the issue you are experiencing with Home Sharing.  It sounds like you are not able to access iTunes from your iPad using Home Sharing.  I found an article with steps that I think would help with this issue.
    I recommend reviewing the full article below, but I think steps 4-7 are specifically useful for what you described:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. Does anyone know what the problem is?

    I am running a 7 year old MacBook Pro 15. Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. I did not have this problem with Mavericks OSX. Does anyone know what the problem is and is there a fix?

    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Since upgrading to Yosemite I can't upgrade I Photo.

    Since upgrading to Yosemite I can't upgrade IPhoto.  It gives me this error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

    Do SMC and PRAM reset and see what happens.  Is your CD drive connected directly to the Mini?  Perhaps it needs cleaning.

  • Since upgrading to Yosemite I can't open Illustrator CS6

    Since upgrading to Yosemite I can't open Illustrator CS6 - it gives me an error message saying I need to install Java SE 6.
    Of course I have no idea where or how to find the downgrade to legacy Java SE 6 and eveyrtime I put the error into your search bar I get a Dreamweaver How to install Java SE 6 note.... and If I could apply that advice to my  illustrator error I would but I don't get an option to install ...
    SIGH I need this to work now-this is my lively hood

    Prompted to install Java SE 6 Runtime | Mac OS 10.9
    Mylenium

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Since upgrading to IOS8 I can't send or receive emails.  Can I uninstall?

    Since upgrading to IOS8 I can't send or receive emails. Can I uninstall?

    That's strange.
    I bet you updated your iPad without using iTunes.
    Anyway
    No, you cannot uninstall iOS 8 and downgrade to iOS 7, but you can try reinstall iOS 8.
    I would suggest you to do it from DFU mode.
    Here are some things you need to know before proceeding:
    You WILL NOT lose your photos, messages, notes, reminders or anything on your device.
    If you choose to backup on iTunes, you will NOT lose your Apps. Anyway, if that happens someway, (it shouldn't happen, don't worry) you can download them later for FREE.
    Here's how to proceed:
    -First of all, as usual, do a complete backup of your device either on iCloud or your iTunes (i personally suggest iTunes. If iTunes asks to backup Apps, agree.)
    -Put your device in DFU [While the iPad is connected to iTunes, press and hold both the home and the power button. When the Apple logo appears, release the power button and keep holding the home button until you see the iTunes logo on the iPad screen.]
    -Once your device is in DFU mode, iTunes will automatically detect it as an iPad in recovery mode, so it will ask you to restore your iPad.
    -Click on Restore and accept iOS 8 terms and conditions to continue the installation.
    -Wait for iTunes to download and install the software.
    -Once your iPad restarts, you will be guided to the configuration of your iPad. When it asks you if you want to configure it as a new iPad or restore from a backup, choose the iTunes or iCloud backup depending on where your backup is.
    -Wait for iTunes to restore your device.
    You're done!
    Now test your device and let me know if everything works well!
    Cheers, @tooFrozen

  • Since upgrading to iWeb08 I can't link to my photos from an external forum.

    I have several webpages created on iWeb '06. I use these sites to post photos on the web. I used to link to individual photos on a page so that they would appear in a discussion forum by getting the image URL ending in .jpg, and posting it with BBS tags in the appropriate forum.
    Since upgrading to '08 I can't do this. All the links I have created over the years have been broken and I can't create new ones from a photo page. Even if I find an image url with what appears to be a unique name - it has a number like #3.jpg at the end - when I paste it in the forum, the link defaults to the whole page/slideshow.
    I can get a url of an individual image using the new Web Gallery, but I don't want to have to republish all my pages as galleries.
    Anyone know what I'm doing wrong/differently?

    I tried to connect a Samsung hard drive. Before Mavericks it was working fine. Now it won't appear in Finder and it can't be mounted in Disk Utility. As with previous issues I reported concerning iOS 7 and Mavericks, I wrote in this forum, but Apple never reacts. People are trying to help each other with workarounds, which is great, but the core issue isn't solved by Apple. It seems after Steve Jobs they're not concerned about quality that much anymore. The fact that I can't use a very common Samsung external hard drive on Mavericks is just way beyond deplorable. And what did I get in return? iBooks?

  • Since upgrading to iOS6 I can't browsing all application at app store only few I can browse which made me upset it narrow down my choices how can I over come this problem plz

    Since upgrading to iOS6 I can't browsing all application at app store only few I can browse which made me upset it narrow down my choices how can I over come this problem plz

    Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first  year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
    Good luck.

  • Since upgrading to Mountain Lion I cannot connect to my wireless router

    Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

    Try this, it's for information.
    In Finder, open the Go menu, press and hold the option  key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

  • Hi, since upgrading to OS6 I am being directed to apple's US store rather than the UK one. Any ideas on how to reset UK store as default, please?

    Hi, since upgrading to OS6 I am being directed to apple's US store rather than the UK one. Any ideas on how to reset UK store as default, please?

    i also am having this EXACT same problem and alot of others seem to be too? i wonder what is going on here! if anyone from apple reads this, maybe it is something you can look into? My mac did not come with a start up disk and i accidently deleted the iphoto app... i have 2 apple I.Ds but i dont use the one originally registered. i am aware i will have to buy the app again in this case so please let me buy iPhoto please! and thanks!

Maybe you are looking for

  • Installing Windows XP with bootcamp from usb thumb on MacBook air 11'

    Hi everyone, I have a macbook air and I'm new to macs. I had recently installed win7 on it with bootcamp and a usb drive successfully. But, the 20g space required to install win7 was getting on my nerves (lets put it that way). I wanted to install a

  • Linking Subreports based on group in the main report

    Hello, I have a main report that groups by department, month, and then employee name.  I put a subreport in at the month and name level (it brings back statistics for a particular employee for the chosen month).  The subreport is based on a completel

  • AP Express cutting music

    Hello there, I just bought Airport Express 802.11 I've set it all on Mac and it work perfectly, internet and airtunes. However when my roommate try to play some music on itunes from his WDS on the living room speakers it start to cut the song in and

  • Using LabVIEW OOP Objects with TestStand 2010

    I need to use labview classes in Teststand 2010. I am not able to pass reference between Labview and Teststand.

  • No position management procedure could by found in Customizing for 57

    Hello I get in FTR_CREATE the error No position management procedure could by found in Customizing for position  CoCd:BPO1 ValArea001 ValCls0003  Trans.:\INTERN\0057. But a product category or product type 57 does not exist? I am creating a 62C inter