Single Devel Vstudio - Multiple target SSAS2012 and SSAS2014

Hi all,
we have prepared a Visual Studio 2012 build machine with all required SDK and Data Access components for sql2008 R2 and sql2012.
Is it possible to add the sql 2014 client components (data access adomdclient etc...) without removing existing Data Access ?
I would like to keep supporting existing sql2012 projects and begin develop sql2014 specific feature.
Are there any tips for achieving the result without side effect on existing visual studio solutions ?
Do I need vs2013 update 3 ?
Thanks in advance
Diego
Diego scaravaggi (TXT e-Solutions)

Hi dscaravaggi,
According to your description, you want to use SQL Server Data Tool-BI to develop both SQL 2012 and SQL 2014 BI projects. Right?
For developing SQL 2014 BI projects, we don't have to use SSDT-BI for VS 2013. In this scenario, since you already have Visual Studio 2012, you can just download the SQL Server Data Tools – Business Intelligence for Visual Studio 2012. It supports both SQL
2014 and SQL 2012 BI projects. Actually, the SSDT is a Visual Studio integrated shell. It's not a part of Visual Studio, even there's no Visual Studio installed on you machine, you can still install the SSDT and use the BI templates. Please refer
to links below:
SQL Server Data Tools – Business Intelligence for Visual Studio 2012 released online 
Install SQL Server Data Tools - Business Intelligence for Visual Studio
If you have any feedback on our support, please click
here.
Simon Hou
TechNet Community Support

Similar Messages

  • Single cycle set , multiple cycle sets and counters

    Hi every one,
    i wanan know the use of single cycle set, multiple cycle set and counters. What kind of functionalilites can be covered by these fields specially in performance based planning and schedulling. Kindly give me some documentation on all three or some good example which can explain the scnerio clearly. Any help would be of great imprortance for me.
    Regards
    Abhishek Sinha

    Hi,
    This may help you
    http://help.sap.com/saphelp_46C/helpdata/EN/b0/df293581dc1f79e10000009b38f889/frameset.htm
    Regds
    Vinit

  • Single hierarchy for multiple target systems

    Hi,
    I have a version named "Account" with a hierarchy named as "Acc2013".
    the hierarchy "Acc2013" is same across Oracle EBS, Oracle Fusion GL, and HFM.
    how can i assign multiple node types to the same hierarchy so that i just need to maintain one hierarchy (this case account hierarchy) and select the properties pertaining to each target system?
    i.e. i select the Oracle GL from the drop down and give the details for the Oracle GL then i select the HFM category from the drop down and provide the HFM related properties.
    the reason why i am asking is, if i dont give the node type, all the unnecessary properties are showing up for other type of hierarchies. for e.g. there is another hierarhcy named cost center there its showing the account related properties.
    to summarize, how i can utilize a single hierarchy to be used for different target systems? Appreciate your help. do i need to create different version and hierarchy for different types of target systems?

    I'm late to respond to this, but I always preach to customers that it is critical for DRM to act as an enterprise view. This isn't a "System A" hierarchy, or a "System B" hierarchy, but rather it's an asset that is shared by both systems, and therefore attributes for both systems are valid. Since node types provide the ability to hide properties, many interesting options present themselves, not all of which lead to a good outcome in the longer term. If a user doesn't ever want to see properties for a particular system, it would be better to just remove their access to that property category in many cases. (They may already have read only access but they object to "being bothered" with seeing those properties.)
    I've seen many DRM implementations head down the other path and end up with duplicate maintenance requirements, configuration challenges, or even having to do major reengineering efforts to transition DRM from a Finance department tool into an enterprise use case feeding a data warehouse. A current customer of mine used a scheme where a checkbox on each property category would make the properties disappear if unchecked...this worked great with a handful of node types, but unfortunately the number of node types needed to support all of these property category combinations was bound by factorial math principles. Consequently the maintenance for this solution went from unweildy to unmanageable as more "non-HFM" data was added to DRM.
    DRM implementations should be guided by governance principles and maintenance business rules, rather than than how things appear in DRM. It's how they appear when published that is of primary importance. I think the new features related to Data Governance will help greatly in this regard. Users that are overwhelmed by the DRM UI can easily be limited to the attributes that are relevant to their specific workflows, and only the "Power users" will see everything.

  • Process single chq for Multiple Vendor Invoice and other Non-Vendor GL

    Hello Experts,
    Scenrio :
    In most of the cases, Vendors of our client have the same Banks as that of our client. our client provides facilty to thier Vendors by depositing chqs in thier account upon due date.
    Procedure :
    I want to process a manual transaction (with a single chq for intra-bank transfer). the total amt on chq would be the total of selection of several invoices & some other payable GLs.
    Query :
    which T-Code should i use & how do i proceed.

    Hi Hussein Merchant ,
    For your requirement you have to do single payment at F-53.There you need to select Other account check box at open item selection.Give the all open item vendor codes and get a cleared document number.
    Go to FCH5 and assign manual single check here
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • How to import a single schema into multiple target schema?

    Hi,
    I want to import a schema named sd from my source database to my target database in  schema sd1 and sd2.
    I have tried using the following impdp parameter which is throwing error :-
    impdp system/system schemas=sd remap_schema=sd:sd1,sd:sd2 directory=backup dumpfile=8.12.13.dmp logfile=8.12.13.log
    Please help me.

    If you look up the syntax in the docs, you will see that while you can remap many schemas into one, you cannot remap one schema into many.

  • How do I create. A single PDF from multiple files? PDF pack on iOS

    How do I create. A single PDF from multiple files? PDF pack on iOS
    The primary reason I signed up for. PDF Pack was to create a single PDF from multiple image files and other PDFs .
    Is this possible? If so how
    thanks in advance
    rich

    Hi Rich,
    The combine files feature isn't available when you're using Reader for iOS. However, you can log on to the web interface at Adobe Acrobat.com using your Adobe ID and credentials, and use the Combine Files feature there.
    Please let us know if you need further assistance.
    Best,
    Sara

  • HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function.  Can you then connect an iPod touch and copy music from a shared librar

    Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function.  Can you then connect an iPod touch and copy music from a shared library?

    Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

  • 1 Success Caption for Multiple Targets in a Drag and Drop Interaction

    I see how I can add success captions to each target in a drag and drop interaction, but can you apply only 1 success caption multiple targets?

    The boundaries of smartshapes were overlapping with each other. For example, the smartshape on 1st line was overlapping with the one on 2nd line. Due to this, every time you place the text caption "Investment" on the smartshape on 2nd line, it automatically moved to the smartshape on 1st line. As a result, you could never get the answer right, and hence you never saw the Success Caption.
    Solution: Move the smartshapes away from each other (or resize them), and ensure that there are no overlaps.
    2,  The number of attempts for this interaction was set to Infinite. So, you have to play this until you get it right, but you could not get it right because of the reasons mention above. That is why you never saw the Failure Caption.
    Solution: Clear the Infinite check box in the Action accordion and specify the required number of attempts. You will get the Failure Caption if you don't get it right in those attempts.
    I just tested these solutions and they worked fine. Let me know if you still face any issues.

  • Is that possible to set up a multiple y-axis and single x-axis in one waveformchart (in LabVIEW 8.0)?

    Hello!
    Is that possible to set up a multiple y-axis and single x-axis in one waveform chart using LabVIEW 8.0?
    Because I need to display several channels in the same chart, if one channel has a very big data range and the others not, the channels with smaller data range will not be displayed very clear.
    Thanks!

    See similar thread at http://forums.ni.com/ni/board/message?board.id=170&message.id=154428&requireLogin=False

  • Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

    Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
    Please help!!

    I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
    Add-PSSnapin "Microsoft.SharePoint.PowerShell"
    $sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
    $uri = new-object System.Uri("http://url/")
    $sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
    $sts.Update();
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Is it or has it ever been possible to select multiple PDF's and print into a single print stream using Reader

    We have Multiple users who claim they have been able to select multiple PDF's and select print. It then would send to a single stream and end up as one document. These are reader users.
    We have tested under reader 10.1.4 and 11.0.06 and haven't been able to make it work. Has this ever been possible?

    Thanks everyone. That's what I needed to know.

  • Multiple flat file in and multiple target tables

    Hi,
    How can we have multiple flat file into multiple targets.
    I am trying to load data from multiple flat files into respective tables. But it gives error like
    VLD-2411: Cannot handle two file structures
    Make sure that only one file structure is used in a SQL*Loader map
    Can anyone help.
    Regards
    Rakesh Kumar

    I donot thing in one mapping you can take multiple sqlloader file.
    If want to load data form multiple file use External table.

  • [Solved] How to create multiple target nodes from single input node (XSL)

    Hello all,
    I have identified what I think is a bug in the visual XSLT mapper (JDev 10.1.3.3). Here is the simplified scenario:
    I have a source XML file that contains a bill-to address and a ship-to address, something like this:
    <header>
    <bill-to-name>My Customer Bill To</bill-to-name>
    <bill-to-address>123 main street</bill-to-address>
    <ship-to-name>My Customer Ship To</ship-to-name>
    <ship-to-address>567 first avenue</ship-to-address>
    </header>I want to translate it to a target XML file that looks like this:
    <addresses>
    <address>
    <address-type>BILLTO</address-type>
    <name>My Customer Bill To</name>
    <street-address>123 main street</street-address>
    </address>
    <address>
    <address-type>SHIPTO</address-type>
    <name>My Customer Ship To</name>
    <street-address>567 first avenue</street-address>
    </address>
    </addresses>Note that what I am trying to do is to create two nodes in the target (something like a for-each), but where there is no repeating node in the source.
    I was able to do this quite simply with a map like this:
    <xsl:template match="/">
      <ns2:addresses>
        </ns2:address>
          <ns2:address-type>
            <xsl:text disable-output-escaping="no">BILLTO</xsl:text>
          </ns2:address-type>
          <ns2:name>
            <xsl:value-of select="/ns1:header/bill_to_name"/>
          </ns2:name>
          <ns2:street-address>
            <xsl:value-of select="/ns1:header/bill_to_address"/>
          </ns2:name>
        </ns2:address>
        </ns2:address>
          <ns2:address-type>
            <xsl:text disable-output-escaping="no">SHIPTO</xsl:text>
          </ns2:address-type>
          <ns2:name>
            <xsl:value-of select="/ns1:header/ship_to_name"/>
          </ns2:name>
          <ns2:street-address>
            <xsl:value-of select="/ns1:header/ship_to_address"/>
          </ns2:name>
        </ns2:address>
      </ns2:addresses>
    </xsl:template>As long as I only use the source view for the xsl file, this works fine and tests just fine. As soon as I switch over to the graphical (design view), the source gets mangled to:
    <xsl:template match="/">
      <ns2:addresses>
        </ns2:address>
          <ns2:address-type>
            <xsl:text disable-output-escaping="no">BILLTOSHIPTO</xsl:text>
          </ns2:address-type>
          <ns2:name>
            <xsl:value-of select="/ns1:header/bill_to_name"/>
            <xsl:value-of select="/ns1:header/ship_to_name"/>
          </ns2:name>
          <ns2:street-address>
            <xsl:value-of select="/ns1:header/bill_to_address"/>
            <xsl:value-of select="/ns1:header/ship_to_address"/>
          </ns2:name>
        </ns2:address>
      </ns2:addresses>
    </xsl:template>which obviously does not work.
    So:
    1). Should my original map work? If not, what is the correct way to do it?
    2). If the map should work (it does), this looks like a bug in the design view.
    3). If my map should work, is there a way to do this in the design view?
    Kind regards,
    John

    John,
    GUI has limited functionality and hence it does not support all the constructs. If you want to implement soln that is visible in gui follow this steps.
    for-each(bill-to-name)
         create <address>tag
         map concat(BILLTO) to <address-type>
         map value of <bill-to-name> to <name>
         map value of <bill-to-address> to <street-address>
    select the for-each you created - right click -> add xsl node ->clone for-each
         repeat similar steps for mapping <ship-to_name>...etc
    If you still unsure send me the source & target xsd and I will send the xsl your way. You can email me at [email protected]
    Dipal

  • Single source to create multiple target nodes

    Hi Guys,
    I need to create multiple target node as many occurrence of source node. how should i achieve it?
    Source node (1...999999)  to Target node(1..1)
    please suggest.
    Regards
    Swapnil

    Hi Nutan,
    Sorry formatting got messed up so posting again.
    Sorry for the confusion. Target structure is 0..unbounded.
    Source structure ...................................... Target structure
    Message 1 ...................................................Message 1
    ZHRMD_A07 (1...1)..........................................MT_EMPLOYEE (0....unbounded)
         E1PLOG1(1...unbounded)................................ Field1
                                                                                    I need to create MT_EMPLOYEE multiple times depend upon occurences of E1PLOG1.
    Regards
    Swapnil
    Edited by: Swapnil Bhalerao on Mar 3, 2010 12:41 PM
    Edited by: Swapnil Bhalerao on Mar 3, 2010 12:47 PM

  • Dual uplinks with single 5400 and single 6509 (with multiple interface cards)

    I have a single 5400 with two gige ports and a single 6509 with dual gige line cards.
    What would be the best method for running them with dual connections in case an interface or line card goes bad?
    Thanks in advance.

    Thank you for the reply Joseph. I swear I've ran SLA on 6500's before. This box is running IOS 12.2 so maybe that's the culprit.
    I found a simple way to configure both devices redundantly using administrative distanced routes pointing through a specified interface. On the 6509, the routes point to a loopback address on the 5400, on the 5400 it's configured as default routes. Like this document explains:
    http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/27082-ip-static-routes.html
    Seems to work like a champ.

Maybe you are looking for