Single FP Bool control always get keydown focus??

Hi Folks,
I'm a little sheepish about posting this, because it seems like such a trite thing, but the last two very simple VI's have suffered from this problem. When entering data into a numeric control, and hitting /r, the default action is to activate my STOP button (!!). I monitored the bool's KeyFocus value while tabbing, entering data, etc, but I never see it get focus. However anytime I hit the enter key... I did a quick work-around prior by simply filtering the /r... I had planned to discard this keydown *if* STOP had focus, but this doesn't seem to be the case. Thoughts? It's quite annoying!
PS - I tried moving the bool in and out of the TAB control (used here for decoration purposes)
Cheers,
Jamie
v2009 devel. w/RT
Solved!
Go to Solution.

Those pesky system booleans come with a preset Keyboard navigation that toggles the button whenever return is pressed. Right-click ->Properties -> Keyboard Navigation then change Toggle to None.
Then consider this idea:
http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Get-rid-of-automatic-key-navigation-assignment/idi-p/1...

Similar Messages

Setting focus outside a control when no other control can get the focus

Hello
I'd like to know if there is a way to setfocus outside of a control even if there is no other control to receive the focus.
I have an editbox that has the focus (active) and I want to set visible to false to this control., but I cannot since it has the focus and there is no other controls that can get the focus.
As a temporary measure I've added another editbox that I moved outside of the visible interface to which I've moved the focus. But I would like to know the proper way to do this.
Thank you for your help.

I think you are asking how to bring a windows form to the front.
If not I apologize...
The way I have done this:
1. I created a new thread.
2. I maxmized the window
I set the following properties:
ShowInTaskbar = False
TopMost = True
Focus()
BringToFront()
In all my testing I needed the window to be maximized, if it wasn't B1 stayed on top.

Database Control always gets "The database status is currently unavailable"

I have two 10.1.0 databases installed on a Windows XP machine. Instance orcl always gets this message. Instance orcltwo does not. If I shut down orcl and then start the web database control page I can select the startup button and it starts up the database and then goes back to the pages that says that the database is not available. The console for that database is running with no errors that I can find. The DBSNMP account is not locked. The SYSMAN account is not locked. There are no errors in any log file that I can find. What am I doing wrong here. The orcltwo instance has no problems at all.

Just to share this experience with everyone. This happened with Grid Control (not sure if it applies to Database Control).
All the targets in EM (except the Agent) showed Down or Unavailable for two weeks. This is how I checked it.
Note that if the Agent is not able to upload Metrics to the repository due to one reason or the other, you will not be able to see the current status.
Assuming your ORACLE_HOME is different from your AGENT_HOME. Check the emagent trace file in the Agent home.
e.g with AGENT home as D:\oracle\agent\
check D:\oracle\agent\sysman\log\emagent.trc to see the latest error message.
Then check the upload directory to see if there are xml files waiting to be uploaded
e.g D:\oracle\agent\sysman\emd\upload
This directory should be clear of .xml file if your metrics loading is working.
From the Agents Monitoring screen in Enterprice Manager (Management System -> Agent), under the Upload session where there is Upload Metric Data button, check for "Last Successful Upload" and "Data Pending Upload " and any error messages. If the Metric upload is not working, the Data Pending uplaod will be more than 0.00MB and the error message link will show you the xml file it is unable to load. Which you will find in my example D:\oracle\agent\sysman\emd\upload
I my example upload file B0002332.xml is the one I found on the error url and when I viewed it in the directory, the structure is different from others. This inability to load it caused all other upload files to be queuing. There was a line in it as
<METRIC_GUID><![CDATA[=3F6739EE03C21CE7CA5E32FD9185]]></METRIC_GUID>
Looking at the structure of other files, I took a guess (not the best , this is a test EM) and changed it to
<METRIC_GUID>80C23F6739EE03C21CE7CA5E32FD9185</METRIC_GUID>
Then all the two weeks 32MB of xml files loaded automatically within seconds. Logoff EM and Login, everything showed the correct status.
Hope this helps.

How to get the focus in a Table Control

Hello Experts,
I have a simple Table control in my screen . I want to know under which column my cursor is ? Basically i want to get the focus the table control . How can i achieve this ?
Thanks
Vivek

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

JS: Get Control that has the Focus and paste something into it

Hi,
I want to implement some clientside code that gets the control that has the focus and copy some text into it.
Can this be easily accomplished?
Thanks
Sven

Hi,
According to your post, my understanding is that you want to get the focus element via JavaScript.
We can use the document.activeElement to get the current active element.
http://stackoverflow.com/questions/497094/how-do-i-find-out-which-dom-element-has-the-focus
http://stackoverflow.com/questions/11277989/how-to-get-the-focused-element-with-jquery
Then you can use the obtained focus element to paste text into it.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Jason Guo
TechNet Community Support

We connected 2 iphones to a single ipad. now the 2 iphone accounts are messed up. One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone

We connected 2 iphones to a single ipad. now the 2 iphone accounts are messed up. One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone

rdpn wrote:
We connected 2 iphones to a single ipad. now the 2 iphone accounts are messed up. One phone is always getting update notices for apps that are not wanted on that phone, but on the other phone
How did you do that? Do you mean you sync to iTunes that had the ipad library?
The phone with the issue, settings - general - reset - erase all contents and settings - this will wipe the phone clean and then restore from your backup.

Always getting errors when trying to control YOKOGAWA 7651 power supply on Labwindows/CVI

Hi,
I'm trying to set the voltage on the YOKOGAWA 7651 power supply through labwindows/cvi. I've set up a numeric slide on my userinterface with callback function "yoko7651dcvolts" and constant name "YOKO7651DCVOLTS".
I always get this error when I run my program:
"FATAL RUN-TIME ERROR: "DcSource.c", line 53, col 65, thread id 0x00001F3C: Invalid argument type: found 'pointer to double', expected 'pointer to int'."
This error points to the third argument of the GetCtrlVal function below. The program/compiler wants me pass the variable "yoko1volts" as integer, but I want to (and should) be able to set voltages as floating numbers.
Plus, even when I declare "yoko1volts" as integer, it stills doesn't work. All I get is zero, zero, and zero...on the power supply meter everytime I press the numeric slide.
This is the section of the C code that is problemic:
int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
double yoko1volts;
switch (event)
case EVENT_COMMIT:
GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
break;
return 0;
This is the related h-file:
#define YOKO7651_1 4
#define YOKO7651_1_YOKO7651SWITCH 2 /* control type: binary, callback function: yoko7651switch */
#define YOKO7651_1_YOKO7651DCVOLTS 3 /* control type: scale, callback function: yoko7651dcvolts */
Please help, how can I fix this issue?
All the drivers (including the YOKOGAWA 7651 power supply) are properly installed and mounted. As a matter of fact, I can successfully turn the power supply on and off with the code below:
int CVICALLBACK yoko7651switch (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
int yoko7651switchstate;
switch (event)
case EVENT_COMMIT:
GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, &yoko7651switchstate);
SetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, !yoko7651switchstate);
yk7651_output (yoko76511Panel, !yoko7651switchstate);
break;
return 0;
It's just setting the voltage on the power supply that is very problematic. Any help is appreciated...Thanks.
Solved!
Go to Solution.

I second Al opinion of a disconnection between the UIR and the variable that holds the panel handle.
As a side note, I noted that the problematic line is reading the value of the controll whose callback is executed:
#define YOKO7651_1_YOKO7651DCVOLTS 3 /* control type: scale, callback function: yoko7651dcvolts */
int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
double yoko1volts;
switch (event)
case EVENT_COMMIT:
GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
break;
return 0;
In a situation like this, I would try using GetCtrlVal (panel, control, &yoko1volts); instead, that should get rid of all problems in panel handle / control ID.
Despite this solution is working, in any case I would deep into the problem as an incorrect panel handle can lead to erratical behaviour in other places of the program.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

HT1338 What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

Why do i always get the Japanese version of JRE/JDK?

why do i always get the Japanese version?
i am in tokyo and i just want to get the English version of JRE and JDK. Why is it so difficult, I have been trying for the last 8 hours to find mirrors and other versions and installing all of them only to see they are all in Japanese and I don't know why. I checked my settings, my local language is German or English, i.e. not Japanese, and always I install it it's in Japanese and afterwards I get the compiler messages in Japanese and I don't understand them.
And then... why is it so difficult to make a comment at sun? i have been to ibm's page and google, you just fill out a form send it, it takes 5 secs, here it takes 20 minutes to find where you can ask a question, then some more to fill out the questionaire...
could you pls tell me where to get the US/english version for jre 1.4.2.x and jdk 1.4.2.x?

You probally ARE getting the english version. If you are using a japanese version of windows or an english version of windows with the locale setting set to Japan then all of the menus (including the installer) will be displayed in japanese. So it just seems like you are installing a japanese version.
To check your local in windows 2000 go to the control panel and then choose regional options. Then, select the general tab and change your locale to one of the English locales. Also, if you want to keep your locale setting set to Japan there are other workarounds. However, first try this.

Single phase inverter controlled by compactRIO

Hi guys, I am conducting my application which need a single phase grid-tie inverter. I want to find a custimized or commercialized single-phase grid-interactive inverter which allow the user to define the control algorithms. I wish I can controll this inverter on Real Time by my CRIO since I have already get these analog/digital I/O modules with my CRIO.
Do you guys any any recommendation for which inverter I can find to achieve this kind of function? or any other suggestion for my application.
BTW, I read there's some NI product called NI Single-Board RIO General Purpose Inverter Controller. Is that one have some specific function for inverter which CRIO doesn't have or it is just a single-board RIO which has similar function with a normal CRIO?
Peter

Hello sdualienware,
The functionality of the Single-Board General-Purpose Inverter Controller (GPIC) is defined by the code deployed to the hardware and may in fact, be used with a normal CompactRIO. I have included a few helpful links below that will not only help to explain the functionality and benefits of using the NI-RIO technology to perform this control (although most resources specifically point to the Single-Board RIO), but also provide sample code that may be used for single-phase inverter control.
http://www.ni.com/white-paper/14207/en (NI Single-Board RIO General-Purpose Inverter Controller)
https://lumen.ni.com/nicif/us/codepowelecguide/content.xhtml (Download the Latest Power Electronics Design Guide Code)
https://decibel.ni.com/content/groups/power-electronics-development-center (Community: Power Electronics Development Center)
Wes W
Application Engineering
National Instruments
www.ni.com/support

Get a focus for table column

Hi, need your help again.
How to do this:
A JTable is inside a form, whenever this form is called out, the first row and first column in table must get the focus, with cursor blinking.
Any way to do this?

Hi,
GROUP BY (using aggregate functions) is the best way to do what you described.
PIVOT and UNPIVOT are probably what you'd want in this case. The phrase "GROUP BY" may not actually appear in your code, but you'll essentially be doing a GROUP BY.
Analytic functions (rather than aggregate functions) can do the job, too, but they'll be less efficient. Analytic functions get you results about the groups, without losing each row's identify, but in this case, losing each row's identity is eactly what you want to do. You only want 'Apple' to appear 1 time, not 3 times.
The fact that you need to do the same query on 20 different tables suggests that there's something wrong with your table design. Wouldn't it be better to have 1 big table, with a new column that has 20 unique values instead?
I hope this answers your question.
If not, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved, so that the people who want to help you can re-create the problem and test their ideas.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Simplify the problem as much as possible. For example, instead of posting a problem with 20 tables, each having 25 columns, post a similar problem involving, say, 2 tables, each with 3 columns.
Always say which version of Oracle you're using (for example, 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Picture duration longer than 4sec not possible? Always gets set to 10min instead.

Hi,
I am using iMovie 11 (9.0.4). At some point in my project, I want to show a single photo, but not for the default 4 seconds, but rather for 30 seconds. So I double-click on the clip and in Clip->Duration I try to change the 4,0s to something else.
First thing which is stange is that I cannot simple set my cursor behind the 4 and hit backspace. Even entering something after the 4 (e.g. 42) is not possible. The only thing which I can do, is setting the cursor behind the 's' and delete everything. Only then am I able to actually enter something in this edit field. Well, I enter 30, but without the 's', because pressing the 's' key on the keyboard is again not possible. Strange? If I hit Enter, 30 get immediatley replaced by 10:00 and now my clip is 10 minutes long. No matter what I enter in this field, it always gets set to 10 minutes.
Does anyone has a solution for this?

You simply cannot - repeat cannot - go from one menu to another menu without breaking up the soundtrack. It is not possible under DVD-Video specifications. DVD-Video is graphically dominant, which means when you switch from one menu to another, or from a timeline to a menu, or from a menu to a timeline, the audio
i must change to the next item's audio stream.
There is no way around this.
I have LOST season 1, and will check it out for you & get back to you later on.
You CAN have continuous audio from the movie into when the highlight layer (subpicture) appears by delaying the appearance of the buttons. The whole thing then becomes one long Motion Menu, with delayed buttons. This can have one long audio stream. Clever timing will make it appear that Audio is seamless if it goes from Motion to Static. I will check this out on Season 1 though.
Slideshows.
Best way to do these is to not actually create a slideshow, but instead create a video timeline at a very low bitrate for the video. Set up your stills as & where you want them in relation to your Audio, in your NLE (Premiere Pro?) and export to a 3Mb/sec MPEG-2 clip instead. You may - depending on the pictures - get away with 2.5 or even 2Mb/sec.
Chapters.
What you want to do can only be done via scripting.
Text.
Subpicture overlays can contain a maximum of 4 colours, including background as colour #1. Blu Ray & HD DVD both get around this and increase the allowed colours in subpicture overlays. What this means to you is that you cannot use drop shadowing or anything other than primitive anti-aliasing. The best you can do is to set the main text colour as the base, and then use the 2 highlight colours at 66% & 33% respectively. It takes practise but can be quite effective.

Always get this msg when starting iPhoto:4 photos have been found in the...

I ALWAYS get this message when I start iPhoto:
4 photos have been found in the iPhoto Library that were not imported.
Would you like to import them?
If I click 'NO' it then says:
The photos have been placed in the folder /Users/HomeOffice/Pictures/iPhoto Library Recovered Photos_22.
(22 being the number of folders I now have - not visible in iPhoto - that contain these mysterious pictures)
If I click 'YES' it then creates a 'Recovered Photos' Album - visible in iPhoto.
The thing is, it does this EVERY time and there are no photos to be seen when I try to look at them to see what they are/delete them...
So, what can I do to get rid of these files from my system and stop the endless cycle of 'Recovered Photos' folder creation when there seems to be nothing there??
Any help is MOST appreciated.
Thanks

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
Regards
TD

Always get same compilation error.. Does'nt matter whatever i write in code

Hi All,
I am getting strange error while compiling my pl/sql code.. it always gives me error
SQL> SHOW ERR
ERROR:
ORA-00942: table or view does not exist
..I always get this error. In sample piece of code , i dont have any table also
SQL> SELECT * FROM V$VERSION ;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
PL/SQL Release 9.2.0.5.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.5.0 - Production
NLSRTL Version 9.2.0.5.0 - Production
SQL> Create or replace FUNCTION check_cid IS
BEGIN
dbms_output.put_line("CHAL");
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line("GHODA");
END check_cid;
2 3 4 5 6 7 8
Warning: Function created with compilation errors.
SQL> SQL> show err
ERROR:
ORA-00942: table or view does not exist
SQL> Create or replace FUNCTION check_cid RETURN NUMBER IS
stat_res NUMBER;
BEGIN
stat_res := 1;
dbms_output.put_line("CHAL");
RETURN stat_res;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line("GHODA");
END check_cid;
/ 2 3 4 5 6 7 8 9 10 11
Warning: Function created with compilation errors.
SQL> SHOW ERR
ERROR:
ORA-00942: table or view does not exist
SQL> Create or replace FUNCTION check_cid() RETURN NUMBER IS
stat_res NUMBER;
BEGIN
stat_res := 1;
dbms_output.put_line("CHAL");
RETURN stat_res;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line("GHODA");
END check_cid;
/ 2 3 4 5 6 7 8 9 10 11
Warning: Function created with compilation errors.
SQL> SHOW ERR
ERROR:
ORA-00942: table or view does not exist

The error message is correct.
You are using double quotes instead of single quotes.
Identifiers (table names, column names etc) with special characters should be enclosed by double quotes, so PL/SQL thinks you are using an identifier and can't find it.
Please replace the double quotes by single quotes.
Please also make sure you always try to iron out simple compilation errors yourself, so you become independent, and don't need to ask for the assistance of volunteers.
Optionally, increase your intake of coffee, and/or buy (better) glasses ;)
Sybrand Bakker
Senior Oracle DBA

ITunes installation always get stuck on "Initializing QuickTime types"

Whenever i try to install iTunes and QuickTime it always get stuck on "Initializing QuickTime types."
I am not able to update my software!
Please Help!

Me Too!!
I have XP SP3. Intel pentium 4 2.6Ghz. 4Gb RAM. 116GB open on one HDD, 72GB open on the other.
I'm on Admin access level.
I'm trying to install iTunes 7.7 bundled with Quicktime 7.5.
I emptied my temp folders.
I shut down my antivirus and anti-spyware.
I shut down all non-essential startup menu items.
My folder names dont have unusual characters.
I have uninstalled all versions of Quicktime and iTunes and iPod updaters from my machine.
Still no luck.
When Installing the Quicktime application, the entire machine locks up when it gets to the "Initializing Quicktime types" segment of the install.
I have left the machine on its own for up to 14 hrs and it never does regain normal function.
The only way to regain control is to reset or hard shutdown.
Can someone please respond to this so my daughter can use her 2 month old graduation present?
Thank you so very much.
PS:
How about standalone downloads for each application?
And, how about patches so the download doesnt take so long and the installation doesn't need to be so intrusive?
Message was edited by: Jeteye97

Single FP Bool control always get keydown focus??

Similar Messages

Maybe you are looking for