Single or multiple gridlines inside plot chart

I have a plot chart that needs horizontal gridlines based on
y-axis. If y-axis is from 0 to 100 then I need the gridlines at 20,
50, and 75.
Thanks.

Hi,
If you have two different controlling areas, I see no functional point of creating single FM area. Moreover, it is not allowed from technical point of view.
Regards,
Eli

Similar Messages

Multiple Reports inside one Single Report

Post Author: maximus85
CA Forum: Crystal Reports
Hi....I'm having this problem of having multiple reports inside one single report. Basically what i wanted to built is a Dashboard that contains 4 main subjects:i)Sales - Contains graph that can be drill down for further detailsii)Internal Process - Contains tables that can be drill downiii)Profit/Lossiv)HRAs far as i know, since all four are of different fact table data, they cannot be all thrown inside one single report to be built on. So i came out with using subreports instead for each components and then finally putting them all together as subreport inside the main report(Dashboard).However, i just realized that by doing that, whenever i clicked on the reports that i wanted to drill down with, it will prompt that particular report that i clicked into a new page, and then from there only i can perform drill down.Is there anyway to enable me to straight away drill down the Sales and Internal Process reports from the main reports(Dashboard) instead of having to click twice as that will be unnecessary right?Or mayb if there's another better ways to do what I have to do? Please do advise and suggest......Thanks alot.......

hi chack,
doesnt matter or preferrably both, as long as i can export all the reports in 1 page into 1 excel, or 1 pdf.

Crystal report -How to display multiple lines in line chart?

Hi,
M struggling to display multiple lines in line chart. All the values m fetching it from database into data table in below format & data type
Category(String).....year(Int).....graph_values(Int).....table_value(String)
Test.........................2006.......... -100............................(100)
Avg..........................2006..........20................................20
Median......................2006...........5................................5
Test..........................2007...........500.............................500
Avg...........................2007............90..............................90
Median.......................2007............45..............................45
M using cross tab to display data and chart to plot line. Following fields I used in Cross tab Expert & Chart expert
Cross tab expert-
Rows u2013 category
Columns u2013 year
Summarized fields u2013 Min of table_value
In Chart Expert u2013
On Change of - Year
Show values - graph values
In cross tab m able to see the data properly but not in graph.I have three categories. Hence it should plot three lines in line chart but m able to see only one line for test category.
FYI u2013 using VS 2008 and crystal report assembly version 10.5
Urgent. Please reply soon.
Thanks
ThakurS

I got the solution.
In Chart Expert - I should use
On Change of -- Year, Category
Show values -- graph values
Thanks,
ThakurS

Toggling between single and multiple selection in a table

I am working on ADF faces. I need to switch between single and multiple selection in <af:table based on a button I select.
I cannot use switcher or rendered property inside <af:table. Only the first one is rendering the second one is not rendering based on the switch
<f:facet name="selection">
<af:tableSelectMany autoSubmit="true"
rendered="#{treeBean.multipleRows}"/>
</f:facet>
<f:facet name="selection">
<af:tableSelectOne autoSubmit="true"
rendered="#{treeBean.singleRows}"/>
</f:facet>
When I use inside the switcher, it doesn't like the parent.
Any ideas would be greatly appreciated.
Thanks,
Vijay.

I have probably misunderstood what your issue is. I do not know what your version of ADF faces is. Here is some sample code working with my version. Please check if your jdev has "rowSelection" attribute. If it has, please try my sampe code
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
xmlns:af="http://xmlns.oracle.com/adf/faces">
<jsp:directive.page contentType="text/html;charset=utf-8"/>
<f:view>
<af:document title="tableSelectMany Demo">
<af:form>
<af:panelGroup layout="vertical">
<af:messages/>
<af:selectOneChoice value="#{sessionScope.tableSelection}"
autoSubmit="true"
id="selType"
label="Selection Type">
<af:selectItem label="Single" value="#{null}"/>
<af:selectItem label="Multiple" value="#{true}"/>
</af:selectOneChoice>
<af:table summary="Periodic table"
binding="#{tableActions.table}"
partialTriggers="selType"
rowSelection="#{sessionScope.tableSelection ? 'multiple' : 'single'}"
value="#{periodicTable.tableData}" var="row" rows="10">
<af:column>
<f:facet name="header">
<af:outputText value="Name"/>
</f:facet>
<af:outputText value="#{row.name}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Symbol"/>
</f:facet>
<af:outputText value="#{row.symbol}"/>
</af:column>
<af:column>
<f:facet name="header">
<af:outputText value="Action Column"/>
</f:facet>
<af:commandButton immediate="true" text="Action"
action="#{row.action}"/>
</af:column>
</af:table>
</af:panelGroup>
</af:form>
</af:document>
</f:view>
</jsp:root>

Add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit

How to add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit. Assume like my test data is like below:
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7
The above graph generated manually in excel. I want to generate the same using excel report generation toolkit. when I use Excel Insert Graph.vi where the input data is 2D array with numeric data but here labview converts the empty cells (eg.x -axis 1,data1- is empty) as zero and while plotting i am getting zero for empty cell values.
Can anyone please help me on how to plot the graph without adding zero for empty cells?
Thanks&Regards,
Bharathi T
TE
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7

Hi Bharathi,
The Excel Insert graph function takes in only 2d arrays as inputs. Since arrays can only have numeric values, any table with a null string is read as 0. Now to get a plot like you mentioned, you could read the table and replace blank Strings as NaN. NaN values in an array when plotted do not appear in the excel sheet. For reference I have attached a sample vi to help you understand.
Regards
Vijetha Nuthakki,
Applications Engineer
NI Systems India
Attachments:
Excel_graph_multiplot.vi ‏21 KB

Single EAR multiple WAR model - faces-config not loading

Hi
I am deploying my application on weblogic 10.3 My application is in form of a Single-EAR-Multiple-WAR model. The application starts up correctly but when i bavigate from one module (WAR) to another (WAR), it doesnt initializes the managed beans. It is not able to load the faces-config from the second WAR.
can anyone please let me know ehat am i missing?
Thanks a lot
-Ankur

Hi,
This is not an issue caused by having multiple wars inside same ear.
This looks like a runtime exception when trying to render the jsp (The jsp is compiled to a sevlet and the inside the service method of the servlet you are getting this exception). Double check you jsp for the possible cause of this exception.
Thanks,
Gopinath Ramasamy

Insert pages from a single document multiple times

I'm trying to create a simple program that I can use to display PDF files that I can use to play at the piano. I perform often, and need to create "play lists" from which I can pull all, or part of, a PDF file containing music and display it.
I have it all working, except for one problem. I may need to "repeat" a section of a piece. I'm building up the play list by calling AcroPDDoc.InsertPages for each item in the play list. If a PDF file appears multiple times in the play list, when I call InsertPages, the call fails.
In this code snippet, pdDoc is the main doc to which I'm adding pages. playList is a generic List of my own PlayList objects, and I need to iterate through all the items in the playList except the first one, which is already loaded.
This code works great unless the fileName I specify has already been opened. The call to AcroPDDoc.Open succeeds just fine, but the call to pdDoc.InsertPages fails if the file has already had pages from it inserted. All other documents work fine. The documentation, of course, doesn't mention this.
        int insertPage = pdDoc.GetNumPages() - 1;
        for (int i = 1; i < playList.Count; i++)
          var newDoc = new AcroPDDoc();
          var item = playList(i);
          int startPage = 0;
          int endPage = 0;
          if (newDoc.Open(item.fileName))
            startPage = Math.Max(0, item.startPage);
            endPage = Math.Max(0, item.endPage);
            var totalPages = newDoc.GetNumPages;
            if (item.endPage < 0 || item.endPage > totalPages)
              endPage = totalPages - 1;
            int numPages = (endPage - startPage) + 1;
            if (pdDoc.InsertPages(insertPage, newDoc, startPage, numPages, 0))
              insertPage += numPages;
So, the questions:
1.) Is it possible to load pages from a single document multiple times?
2.) Is there a better way to do this? (That is, loop through a list of file names, starting and ending page numbers, and add the documents to an existing document.)
Any help appreciated! Thanks -- Ken

Hi Ken,
>The documentation, of course, doesn't mention this.
The documentation does not state explicitly that you can't insert pages again from a PDDoc you open again and never close.
But it mentions that you get references only from an already opened PDDoc.
"...Opens the specified document. If the document is already open, it returns a reference to the already opened PDDoc. You must call PDDocClose() once for every successful open..."
It doesn't state that you can't insert pages from a referenced PDDoc but it seems so.
I would close the PDDoc within your for-loop after inserting pages and release newDoc.
Regards
Norbert

Crosshair mouse tracker on Plot Chart

Hi All,
I have implemented a flex plot chart, which works fine (able to plot items to it). I want to add a cross hair tracking device that will move along with the mouse. The cross hair will draw a simple horizontal and vertical line crossing at the mouse pointer to the edges of the chart. I already have registered for the mouse move event (I have a status line that prints the real world values based on x/y position as the mouse moves). The crosshair implementation I have tried implementing causes the mouse tracking to act very strange...almost, in a lagging type behaviour. I am using a Graphics object from the plot chart object. I do a clear each time before I redraw the crosshair (as the mouse moves). The 'clear' seems to be the core of the lag problem (if I comment out the 'clear', the tracking works fine..but of course the crosshair from the previous mouse position doesnt erase). I didnt see an 'xor' type of function which is what I have used on like projects before. Any ideas or suggestions would be greatly appreciated.
my plot char is called tlat_chart.
var G:Graphics = tlat_chart.graphics;
G.clear();
G.moveTo(somex, somey);
G.lineTo(newx, somey);
etc......

Take a look at Eli's custom chart annotations here: http://demo.quietlyscheming.com/ChartSampler/app.html

Flex 3 : Contour Plot Chart

Hi,
I have been tasked with a project where a contour plot chart is required like the one below. Does anyone know how this coould be done in Flex or are there any third-party components available to do this?
Thanks very much for you help.
Martin

Hi Subeesh,
Thanks for the info but it's not a radar chart. What I am looking for is more like --> http://www.singleton-labs.com/mcharts.php
Martin

Dynamic Series creation for Plot Chart

Hi,
I am using a plot chart which takes data from an external XML file.
Based on certain fields in the data, I create 3 different plot series.
I use a Combo box to show different plot series based on the selected value from it.
I am placing another Combo box
How can do the below task:
I need to create some dynamic series based on some node elements in the series for which the chart is currently shown.
I create another Combo box to show the above generated plot series based on the selected value from it.

Hi,
I am using a plot chart which takes data from an external XML file.
Based on certain fields in the data, I create 3 different plot series.
I use a Combo box to show different plot series based on the selected value from it.
I am placing another Combo box
How can do the below task:
I need to create some dynamic series based on some node elements in the series for which the chart is currently shown.
I create another Combo box to show the above generated plot series based on the selected value from it.

What is meant by single entry-multiple options in the selection screen

hi,
please let me know what is the meant by 'single entry-multiple options' in a selection screen.
thanks in advance

Hi Surya,
Nomally we use to declare Selct options like
<b>select-options : s_var for mara-matnr.</b>
here you can enter range of values for material number like 000 to 9999999999.
but if you want single entry multiple option you need to give no-intervals options when the select option will behave like parameter .. when you cannot give range of values but you can give multiple values for a single field.
for single entry-multiple options write the select option like this
and see the diffrence.
<b>select-options : s_var for mara-matnr NO INTERVALS.</b>
here cannot enter low and high range for matnr but you can enter mulitple values for select option..you can enter only low range values..
Please reward if usefull..
Thanks,
Gokul

Explain about transparent mode, single mode, multiple context mode

You can explain about the differents of transparent mode, single mode, multiple context mode in ASA 5500? Thank you very much.

Great question. Hope the below helps:
Transparent Mode: In this mode, the ASA will filter traffic without requiring L3 on the ASA. This means that in your config you will not put IPs on the interfaces to be used for traffic filtering. Thus, filtering is transparent to the traffic as the traffic isn't directly routed to the firewall. Think of it like you have a server plugged into a switch. In transparent mode, you place the ASA between the server and the switch and no configuration change is required to the server. In routed mode, you place the ASA in the same physical location between the server and switch, but have to change the server to use the ASA as a default gateway.
Single Mode: Default mode of an ASA. The ASA acts as a single firewall and all interfaces are provisioned to be managed through a single firewall configuration.
Multiple Context Mode: The ASA is split into multiple virtual configurations. With the ASA now virtualized, you provision the physical interfaces on the ASA to the virtual firewall configured. Each context has it's own configuration seperate from the rest of the firewall. Multi-context is meant for enterprises to invest in a single piece of hardware and scale it for use as multiple security devices.
Hope this helps. Let me know if you have anymore questions!
-Mike
http://cs-mars.blogspot.com

Simple Flex Chart question - Plot Chart labels

I'm playing around with displaying data from WDA as charts in Flex 3.
I'm able to bind my internal table, which has 3 fields, to the plot chart.
The table looks like this
ext_id      type string    " bound to prjname in Flex
cost         type string    " bound to prjcost in Flex
benefit     type string    " bound to prjbenefit in Flex
These are all bound to my island's DataSource.
I have bound these in Flex and the Cost and Benefits are showing up as points on my chart. However, I can't seem to get the Project Name to display on the plot points. All I see when I mouse over the point is EXT_ID, and the values for cost and benefits.
The cost/benefit values are coming across correctly, just not the project name (ext_id) value. any ideas?
here's the Flex code for the chart
     [Bindable]
     public var dataSource:ArrayCollection;
     [Bindable]
     public var prjcost:String;
     [Bindable]
     public var prjbenefit:String;
     [Bindable]
     public var prjname:String;.
    <mx:PlotChart id="plotchart1" dataProvider="{dataSource}" showDataTips="true">
       <mx:series>
            <mx:PlotSeries displayName="{prjname}" yField="{prjcost}" xField="{prjbenefit}" dataProvider="/>
        </mx:series>
    </mx:PlotChart>

This is really a Flex question not an Islands specific one. I don't think the displayName properity is what you want to use here. This is the name for the entire series as it will be displayed in the legend. I think what you want is a dataTip. You register a callback for the dataTip rendering and then fill the custom dataTip quick info.
This is an example from a bar chart, but the theory is the same:
<mx:BarChart id="barChart" dataTipFunction="dtFunc" xmlns:mx="http://www.adobe.com/2006/mxml" type="clustered" width="100%" showDataTips="true" height="100%">
     <mx:verticalAxis>
          <mx:CategoryAxis categoryField="{SalesOrd}" dataProvider="{dataSource}" />
     </mx:verticalAxis>
     <mx:series>
          <mx:BarSeries id="bsGross" xField="{grossAmt}" displayName="Gross Amount" dataProvider="{dataSource}" fill="{otdFill}" showDataEffect="{slideIn}" />
          <mx:BarSeries id="bsNet" xField="{netAmt}" displayName="Net Amount" dataProvider="{dataSource}" fill="{rtyFill}" showDataEffect="{zoomIn}" />
     </mx:series>
</mx:BarChart>
private function dtFunc(hd:HitData):String {
              switch(BarSeries(hd.element).id){
                   case "bsGross":
                         return "Sales Order #: " + hd.item.SO_ID + "\n" + FlashIsland.formatNumber(hd.item.TTL_GROSS_AMOUNT) + " " + hd.item.CURRENCY_CODE;
                         break;
                   case "bsNet":
                         return "Sales Order #: " + hd.item.SO_ID + "\n " + FlashIsland.formatNumber(hd.item.TTL_NET_AMOUNT) + " " + hd.item.CURRENCY_CODE;
                         break;
              return "Amount";

How to Implement a Single Folder - Multiple Authors Scenario für NW 7.3?

Hello,
is a version "How to Implement a Single Folder - Multiple Authors Scenario" for NetWeaver 7.3 planned?
Best regards,
Arnold Gallemann

Hi Detlev,
thanks a lot for sharing your work!
Due to the reason we need a different configuration in KM, I changed e.g. some values in the .cc.xml and .co.xml files. I rebuild the project and checked the created EAR file. I noticed that the ConfigArchive file in EAR file still has the old values. It seems that SAP NetWeaver Developer Studio 7.3 is not recognizing in a portal application project the configuration of the src.config folder anymore. To test this, I removed the initial provided ConfigArchive in the folder dist\PORTAL-INF\config\ from your project. I rebuild it and the ConfigArchive in the EAR file wasnu2019t included.
I found in the documentation (http://help.sap.com/saphelp_nw73/helpdata/de/42/60aec0032c1422e10000000a114cbd/frameset.htm) the SAP Note 1572813, which would describe how to use KMC wizards in SAP NetWeaver Developer Studio 7.3. But the article is currently not released to public.
In addition I have discovered, that it is possible to include the src.config folder in the build process if the project is set up as a development component (see for details bullet point Optionally of http://help.sap.com/saphelp_nw73/helpdata/de/42/60aec0032c1422e10000000a114cbd/frameset.htm). This works. But later on I am facing another problem: I am missing the entry KMC-CM to add it as a dependency for the development component.
Best regards
Mario

Single folder multiple Author scenario in KM

Hi Every One,
I have tried to configure Single folder multiple Author scenario in KM. i have done all configurations Given in Following document but i haven't Succeeded. Please help me Out.
Configuration Document like:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1f74d7c0-0d01-0010-50b1-9810a1584b00
Regards
Sridhar.

Hi All,
Sorry for the previous post. Let me explain the scenario in brief..
We need to upload a document to a particular folder in KM and assign Permissions to the same. Say For example, we have 100 users and a admin user. The uplaoded file by a user should not be viewed by other 99 users, the admin & the user who uploaded the doc can have full control over it. Similarly the case should be generated for the other 99 users.
We tried to uplod the document and assign permnissions manually. But i know this is not the best way to approach this requirement.
What should be the best solution to assign permissions to the uploaded document?
Regards,
Sridhar

Single or multiple gridlines inside plot chart

Similar Messages

Maybe you are looking for