Single records statistics

Hi,
What is "Single records Statistics" in terms of performance tuning in ABAP. I want to know the concept of "Single records statistics"
Please help
Regards,
Santosh

Dear Sanket,
Thanks for helping me. Full points for your effort.
Regards,
Mirella

Similar Messages

How to store as single record data coming from different ods to cube

Hi All,
we have the scenario like .
Same contract values are uploaded from 3 ods to cube.In the cube this information is stored as 3 different records.
Is there any option having same contract no and same fiscal period values should be stored as single record in cube.
Thanks in advance.
Regards,
Shradda.

Hi Shradda,
On Performance Side .....consider below points
1. Indexes on Cube ( That delete indexes before load and create them after Load ).
2. Aggregate Design ( Decision on Base Aggregates, roll up Hierarchy , BW Statistics etc ).
3. Partition of InfoCube ( Basically decision on No. of Partition )
4. Data Package Size ( Always try to have larger Data Package so that preaggreation will reduce the no. of Data Records ).
Best is Service.sap.com on BI page u will find material for performance . THat will help you .
To assign points on the left of screen u will get radio buttons for assigning points for each person who has responded .
Regards,
Vijay

How to use execute query For a single record

Hi All,
I am working with oracle forms 10g, I have developed a custom form.
I the form user enter some data and click save in the menu and data get inserted into my table. Inside the insert statement i have hardcoded some values, Once data get inserted i cant able to see that values immediately in my text fields in my form.After requerying i can able to see the changes.
For example I have a text field called Status, and the field is display only field. At that time of insert i have hardcoded as "INCOMPLETE". Once the user enter the data in the form and click save the data get inserted in to my table but i cant able to see the status, after i requery my form i can able to see the status.
Here i do multi insert also.
This is my insert statement
BEGIN
First_Record;
LOOP
IF :BANK_GUARANTEE_BLK.CHECK_IN_OUT = 'Y'
THEN
XXBANK_GUARANTEE_HEADERS.XXBANK_GUARANTEE_INSERT;(this is my package, here i have written my insert statement)
--Execute_query;
END IF;
Exit when :System.Last_Record = 'TRUE';
Next_Record;
END LOOP;
END;
If user insert only one row and i gave Execute_query to refresh and bring the current data, but when i use execute_query Its brings up all the datas in the table.
Can any one tell me how to avoid this and how to use execute_query for a single record.
Thanks &regards
Srikkanth

Solved,
The solution is
set_block_property('LC_REQ_BLK',ONETIME_WHERE,'LC_PO_NUMBER='||:LC_REQ_BLK.LC_PO_NUMBER);
go_block('LC_REQ_BLK');
execute_query;
Works fine.
Regards
Sri

How to insert sales text (MM02) into a single record of a Ztable.

Hi,
I'm extracting data from different data base tables and populating a Ztable which has Matnr as primary key and sales text as a field.
I have already used READ_TEXT to display the text and it is displayed in multiple records which in turn leads to duplication of Material numbers.
Now I want to avoid duplication of records (Matnr) as this being a primary record, and display the sales text of a particular material number into one single record.
Can anyone tell me how to insert sales text (MM02) transaction into one single record.
Thanks,
Govind

sorry i am not enough clear about your requirement...
as i can understand i am explaining to you.
suppose your itab contains repaeating matnr.
matnr
1
1
2
2
2
3
3
like this.
data : text(200),
matnr like mara-matnr.
loop at itab.
call READ_TEXT fnmodule.
loop at tline.
concatenate text tline-tdline into text.
endloop.
matnr = itab-matnr.
at end of matnr.
itab1-matnr = matnr.
itab1-text = text.
append itab1.
clear text.
endat.
endloop.
NB change the code as per your requirement
regards
shiba dutta

Concatenate multiple records into one single record

Hello everyone,
Can anyone guide me how to merge multiple records into one single record
like......... I am getting the data in the file like
aaaaa/bbbbbbb/ccccccccccc/dddddddddddd/eee
ffffff/gggg/hhhhhhhhhhhhhh
/123/4567/55555/99999999/kaoabfa/eee
fffff/kkkkkkkk/llllllllllllllllllllllll
when i use gui_upload I am getting the data into the internal table in the above format.
My main intension is to split the record at / to multiple lines and dowload it into another file.
What i am planning to do is... if the line does not start with / then i want to concatenate the multiple lines into single line and then split it into multiple records. Can anyone guide me how to achieve this.

Yes, it should work.
In my example
Loop at itab.
concatenate i_text itab into i_text.
endloop.
You change that loop for the loop of your internal table with the file records
So if you have this three records
'aaaa/bbb/ccc'
'/dddd/efg'
'hijk/lmn'
i_text will look like this at the end
'aaaa/bbb/ccc/dddd/efghijk/lmn'
then in this part of the code
split i_text at '/' into table itab2.
itab2 will have the records looking like this
aaaa
bbb
ccc
dddd
efghijk
lmn'

How can I map last of the repeating records into a single record?

I have a following input schema, I need to take only one of the <Student> records and map that to a single record in output. Doesn't matter if the first, second or last one of the records get mapped, I only need one in the output. Any idea how can
this be accomplished?
Input:
<Students>
<Student id="1">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
<Student id="2">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
<Student id="3">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
</Students>
Expected Output:
<Candidate>
<Student>
<Name>
A
</Name>
</Student>
</Candidate>

Sounds rather complex for something that could be done very simple in custom XSLT like this:
<?xml version="1.0" encoding="utf-16"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="Students">
<Candidate>
<Student>
<Name>
<xsl:value-of select="Student/Name" />
</Name>
</Student>
</Candidate>
</xsl:template>
</xsl:stylesheet>
Morten la Cour

Integrating number of records into a single record

Hi
I have a table where we store trainees with certifications, it stores trainees address, id, pass/fail flag, course codes, competetion date and certificate expiration date. WHat I need is to display a single record for each trainee in my query. In this case, what we have currently in the table is we might have 11 certificates for a trainee or 1 or maybe 5 etc. All I need is to display all his information, address, trainee id, courrse code..course code11 in a signle record. Is it possible and how? Please help

Try this one - it points to the same page and looks like it works:
Re: How to show the SELECT result in a certain form?

Merging two records in a single record for the same matnr,werks and bwart.

Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table.
I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable.
Then there should be only one record for the same matnr,werks,bwart.
Any suggestion would be appreciated.
Regards,
Amit

hi,
You can COLLECT statement only if all non key fields are numeric.
This statement Adds all such fields and give us a single record.
Regards
Sumit Agarwal

Getting error " Incomplete update due to error in single records"

Dear All,
We are loading data from DSO to Cube using full load and the load is failing giving an error message Collection in the source system ended and when checked the error message button it is showing as " Incomplete update due to error in single records" . and also one more message "Messages (type E) for data records with record number 0
Message no. RSM2714". Can any one tell us the reason for the failure of this load ? and how to resolve it ?.
When we click on the help button of the error message it is displaying the message as below
Incomplete update due to errors in single records --> Long text
Message no. RSM2712
Diagnosis
In the update rules, one InfoSource record was used to create several records in the data target. These records must be handled in the same way to enable tracking into the PSA and the treatment of errors in individual records.
In the previous case, one record was updated in this kind of group generated by update rules, whereas other records in the same group were rejected. If you updated the PSA data record again, the records that were already updated would be updated again. Duplicate records would appear in the data target and the data target would thus be inconsistent.
System Response
The data record with errors was highlighted in the PSA. However, no error request was generated.
Procedure
Delete the request in the data target and, after removing the error, update all records for the request to the data target again.
Regards,
JayaKrishna

hi,
Can you please check out the PSA error record and check this out in Source DSO as this load is for DSO -> Cube....
Please correct it in PSA if this is not correct as per DSO ....prior correcting data in PSA pls delete the request from Cube.....then it will allow to correct or delete record in PSA and then further push data from PSA to Target Cube...
If its correct as per DSO then run load in DSO sometime few records wrongly updated by end user and they correct it by evening for Submission....So u will get the corrected record and then run manually further load to Cube...
Hope this will help....
Regards,
Mahesh

Sender File Adapter cannot send single record per message ?

Hi,
I have scenario flat file to jdbc. but then why the sender file adapter didn't split the record to become single record per message eventhough i have set it in "Recordsets Per Message" = 1. ?
Document Name               MT_APINVOICE
Document Namespace          urn:file:jdbc:apivinvoice
Document Offset               8
Recordset Name               INPUT
Recordset Namespace
Recordset Structure                          RECORD,*
Recordset Sequence                          Ascending
Recordset per Message          1
Key Field Name
Key field Type               String
RECORD.fieldFixedLengths     10,5,10,10
RECORD.endSeparator     'nl'
RECORD.fieldNames          F1,F2,F3,F4
Please advise
Thank You and Best Regards
Fernand

>>but then how to make for example more then 1 records per message.
like 10 records per message. should i set RECORD,10 ?
That is right. Just try it out yourself.
@Shesagiri,
Number of record is decided by the parameter Recordset structure and number of recordset with in a message is decided by Recordset per Message.
Regards
Jaishankar

How can I add recording time to a single recording not a series recording?

If I set-up a series recording it allows me to add minutes to the recording time why can't I add time to a single recording? For example if I want to record a single show tomorrow I find it on the guide and hit record. Now I want to add a few minutes on the end of the show because I know it always runs over it's advertised time why can't I add the time? It doesn't gives to extra options for a single recording. The only time I can add time to a single recording is if the show is currently on then it allows me to add time but, not before the show is on. So what good does that do? Comcast allowed me to set-up extra options to a single recording.

Actually you can. It's a bit clumsy but what you have to do is go to the DVR menu, select scheduled reordings, select the recording you want to extend, scroll through the menu and you will find an option to modify the start / end time.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

IDOC with Multiple Segment to One Single Record Mapping

Hello
I have a problem mapping the values of the segment <E1CSKTM>
which occurs two times in my source IDOC to a single record.
My requirement is to get one field (LTEXT) from the first E1CSKTM segment and map it to Name and take the same field (LTEXT) but from the second E1CSKTM segment and map it to OrgDescription
The source message:
<?xml version="1.0" encoding="UTF-8"?>
<COSMAS01>
   <IDOC BEGIN="1">
      <EDI_DC40 SEGMENT="1">
         <TABNAM>EDI_DC40</TABNAM>
         <MANDT>300</MANDT>
         <DOCNUM>0000000000750131</DOCNUM>
         <DOCREL>700</DOCREL>
         <STATUS>30</STATUS>
         <DIRECT>1</DIRECT>
         <OUTMOD>2</OUTMOD>
         <IDOCTYP>COSMAS01</IDOCTYP>
         <MESTYP>COSMAS</MESTYP>
         <STDMES>COSMAS</STDMES>
         <SNDPOR>SAPQAE</SNDPOR>
         <SNDPRT>LS</SNDPRT>
         <SNDPRN>QAE300</SNDPRN>
         <RCVPOR>SAPQAX</RCVPOR>
         <RCVPRT>LS</RCVPRT>
         <RCVPRN>QAX304</RCVPRN>
         <CREDAT>20080308</CREDAT>
         <CRETIM>090820</CRETIM>
         <SERIAL>20080211134325</SERIAL>
      </EDI_DC40>
      <E1CSKSM SEGMENT="1">
         <MSGFN>005</MSGFN>
         <MANDT>300</MANDT>
         <KOKRS>1000</KOKRS>
         <KOSTL>0105012501</KOSTL>
         <DATBI>99991231</DATBI>
         <DATAB>19000101</DATAB>
         <ERSDA>20060219</ERSDA>
         <USNAM>HAMEED</USNAM>
         <BKZER>X</BKZER>
         <BKZOB>X</BKZOB>
         <PKZER>X</PKZER>
         <MGEFL>X</MGEFL>
         <BUKRS>1000</BUKRS>
         <GSBER>20</GSBER>
         <KOSAR>N</KOSAR>
         <VERAK>TBA</VERAK>
         <WAERS>SAR</WAERS>
         <KHINR>105012001</KHINR>
         <KOMPL>X</KOMPL>
         <OBJNR>KS10000105012501</OBJNR>
         <PRCTR>0105012000</PRCTR>
         <FUNC_AREA>Z240</FUNC_AREA>
         <FUNC_AREA_LONG>Z240</FUNC_AREA_LONG>
         <E1CSKTM SEGMENT="1">
            <MSGFN>005</MSGFN>
            <SPRAS>A</SPRAS>
            <KTEXT>مدير الدائرة وموظفوه</KTEXT>
            <LTEXT>م. د. وموظفوه/ حسابات منطقة المدينة</LTEXT>
            <SPRAS_ISO>AR</SPRAS_ISO>
         </E1CSKTM>
         <E1CSKTM SEGMENT="1">
            <MSGFN>005</MSGFN>
            <SPRAS>E</SPRAS>
            <KTEXT>DvM and Stff/AOD-Mad.</KTEXT>
            <LTEXT>Div Mgr and Staff/AOD-Madinah</LTEXT>
            <SPRAS_ISO>EN</SPRAS_ISO>
         </E1CSKTM>
      </E1CSKSM>
   </IDOC>
</COSMAS01>
The Target Message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:CostElementMT xmlns:ns0="http://se.com.sa/materials">
   <INSERT>
      <COSTELEMENT_DATA action="INSERT">
         <TABLE>usmuser.OrganizationCodes_test</TABLE>
         <access>
            <OrgCode>105012001</OrgCode>
            <CostCenter>0105012501</CostCenter>
            <OrgDescription> English Name<OrgDescription/>
            <Name>Arabic Name</Name>
         </access>
      </COSTELEMENT_DATA>
   </INSERT>
</ns0:CostElementMT>
is this possible using the graphical mapping?

Hi Baheej,
If in your input "E1CSKTM" segment always occurs twice than u can go with the above UDF mentioned by Chirag and also u need to take care that field (LTEXT) also always occurs.If the field does not occur always than you need to check it using exists functions.
Andmoreover if the "E1CSKTM" segment does occur more than twice than u need to create a UDF where u need to pass the values alternatively.
Please check the above details and let us know if any furthur enhancements are to be made.
Thanks,
Bhargav
Note:Award Points if found useful.

Time out while reading single record from CRMD_ORDERADM_H table on OBJECTID

Hi,
This is the problem i am facing in CRMD_ORDERADM_H.
if i search for a single record in CRMD_ORDERADM_H Table using SE11 on OBJECT_ID field, it is giving me Time out error.
CRMD_ORDERADM_H db size would be > 1 Billion records.
It is having a Secondary Standard index on OBJECT_ID.
If i search for single record with OBJECT_ID and PROCESS_TYPE i am able to get the result within seconds.
But if i take some range in OBJECT_ID and single value in PROCESS_TYPE then i am getting Time out erro.
we have index (custom) on OBJECT_ID and PROCESS_TYPE combination.
What would be the cause?
Thanks in Advance,
-Kishore

Hello,
there is a special table for reading records from orders: CRMD_ORDER_INDEX.
Regards, R

Open single record form for particular record

It's simple to open tabular form for particular record
- just add page item, pass value to this item
and add this item to WHERE clause.
But what is common approach for single record form?
Where is it described?

here is my solution:
1) create page item which will receive primary key value
2) look at Sample Application Page 7 - customers edit page -
you need "Automated Row Fetch", called in "After Header" block

Function Module to convert multiple records into single record and vice-ver

hi,
i have a requirement to convert 10 records in an internal table to single record which should be passed
to a single variable and store in the database.Kindly let me know is there any function module
which meets my requirement. Also i need to do split one single record to 10 records each of
say 65 length interval.
kindly provide me if there is nay functinon module as such.
I can do with ABAP-OOPS.Please suggest function module.

I dont think such FM exists, but if you wanna code one it would be simple. Just loop through the internal table, keep concatenating the currently processing record into a long character variable to convert 10 records into one record.

Single records statistics

Similar Messages

Maybe you are looking for