Size error with the "Software Projects" example

Hi All,
I have tried to download some examples from http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html - eg. "Software Projects" applications.
The file "sw_projects_0.93.zip" was downloaded but when I have tried to run the initial script "sw_projects_installer_0.93.sql" there is the following error displayed:
"The script exceeds the maximum size allowed."
The script has 2222 kB and it looks it is not possible to install. Does anyone have a solution?
Thanks,
AB

Hello,
Have your APEX administrator increase the size of the "SQL Scripts Maximum Script Size in bytes" setting in the APEX instance, they can do this by logging into the Instance as an Administrator and navigating to -
Home -> Manage Service -> Feature Configuration
Hope this helps,
John.
http://jes.blogs.shellprompt.net
http://apex-evangelists.com

Similar Messages

I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software. I could not install it. Where do I go from here?

I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software. I could not install it. Where do I go from here?

Photoshop 4.0 is not compatible with MAC 10.9.3 . You will face issues as when Photoshop 4.0 was launched there was no MAC Mavericks and Adobe has not tested the version on new MAC OS.
If you want you can download the latest version of Photoshop CC 2014 and you can use it as a trial for 30 days and you can plan to switch to the latest version.
http://www.adobe.com/products/photoshop.html

HELLO, I HAVE THE SNOW OF LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ... THANK YOU

HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!

Have a look here:
http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
(Like any website owner, I may (or may not) derive compensation from my website)

HT5022 10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"

You are trying to install a version of Airport Utility earlier than 6.0, correct? If so see the following: Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.

Event Library will not show External HD with the current project.

Problem opening the project I'm working on...I start FCPX and the Event Library quickly shows the external hd with the current project I want but only for a slit second, then it fires up a error message(the I can't possibly read) and acts as if the hd doesn't exist. I can see the hd on the desktop(share is on) and the drive is partitioned, with one of the parts as a Time Machine BU(but I have turned TM off).
Tried:
permissions
restarting
moving file to main drive
moving file to another drive that isn't a TM drive
Thanks in advance for any advice

It's been documented that Time Machine drives cannot be used with FCPX (they disappear just like you are talking about). However, I would genuinely be surprised if you couldn't partition a drive so that one partition is devoted to TM and the other to FCPX, as the two partitions should be seen as two separate drives.
That said, when FCPX sees the TM drive partition, it might do something that dismounts the other partition from its view as well. For example, it might look at a drive-level identifier and decide that anything with that identification is not suitable for FCPX.
Give this a try -- eject the TM drive partition in the Finder prior to opening FCPX. So you should only have in the Finder the partition you are using with FCPX. To be safe, reboot before trying all of this.
EDIT - then open FCPX and see if you can see the drive and it stays visible.

Rhsnippet.apj Error with RoboHTML 11 Project on Network

I have an RH 11 project on a network drive. The project has 485 snippets. When adding or modifying snippets I get the following error:
An error occurred while trying to read data from <n:\roboHelp Projects\\rhsnippet.apj <1>.
When I open the rhsnippet.apj file, the file is truncated like this:
<file>
<name>mysnippet.hts</name>
<comments></comments
It seems that RoboHelp cannot complete writing to the APJ file.
After closing and reopening the project, I then get a message saying the cpd is corrupt. After deleting the cpd and reopening the project, I still get a message saying the project is corrupt.
The only way I have found to fix the project is to move the project back to a local drive, delete the cpd, delete the rhsnippet.apj file and re-import all the snippets.
I have seen a similar issue which was resolved by moving to another network drive. I moved my project to another network drive but the issue still occurred.
rhsnippet.apj Error with RoboHTML 10 Project on Network
My experience with R10 R11 projects on a network drive has been problematic, despite Adobes assertion that R11 and R10 projects now work on network drives. For example, Adobe support confirmed that RoboHelp does not support projects on a network drive that uses DFS (Distributed File System). I have found that large projects seem to be problematic on network drives.
I suspect that part of this issue is the large amount of snippets I have, as other projects on the network drive don't appear to have this issue as they do not contain a large amount of snippets.
If anybody else has experienced a similar issue with projects on a network drive related to snippets I'd be grateful for some advice.

Thanks for the advice Peter, but deleting the CPD does not fix the issue. I have 500 snippets because I have 500 fields (and growing all the time) to document that can appear in multiple reports and also require that each field is documented separately. So although I seem to be pushing the envelope with the amount of snippets, I am grateful for the existence of snippets because trying to document this without snippets would be a nightmare!
One thing that annoys me is that you cannot apply a style sheet to multiple snippets at the same time. At least I have not found a way. Is there a way of doing this – short of editing the HTML for each snippet individually? I will add this to a feature request for RoboHelp as well as log a bug report with Adobe.

"There were errors installing the software. Please try again"

I have decided to sell my iMac and G4 iBook, in order to buy a Macbook Pro. I have two people interested, but only if both computers are formatted and as they were when they left the factory.
I erased all my files from both computers, leaving just the system files. I placed the instalation disk for OS X into my iMac (The disk that came with it) and selected instal. I chose the option to delete the current settings and instal a fresh version of OS X.
I hope that makes sense so far.
Anyway after a while, disk 1 had finished, and I was told to insert disk 2. I inserted disk 2, only for half way through the instal process, to be greeted by "There were errors installing the software. Please try again". I have now tried 14 times. I have officially given up.
I have searched these forums for an answer, but it seems as though other people have done things such as, installing other software, or hardware, and that is the cause of the problem. However I have done none of the above. I have tried searching the Mac Support pages, with no luck.
Can anyone help?

I suggest you do the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Now try installing OS X. If you still have a problem then it's possible the hard drive is bad or the installer discs are damaged (or possibly just dirty and need a gentle cleaning) or there's a problem with the optical drive.

Internal Error: Error in the Software Update Packa...

hello,
I'm using the latest Ovi Suite and N82 (v30). I saw notification of firmware update and then clicked to update it. the updated was downloaded but when it's in the process of updating it says
Internal Error: Error in the Software Update Package Configuration
I've replugged my device after the system restart but it shows the same.
how do resolve it? neither do i see any option of redownload the update package. where does it download the update package?
thanks

And whatmake you think this is going to help? The answer from local Nokia Care Pointwas: “if you hit the phone it might be the reason for this problems and we arenot responsible for warranty void for your Nokia phone blah blah – of course Idid not hit or throw the phone but never mind – the just don’t care. Thisproblems was described in details to Nokia Care Point Finland and the answerwas … “ we are very sorry, but you need to make a connection with your localNokia Care Point” ha ha – thank you very much, they were so helpful ! That’swhy I don’t want to call or connect Nokia anymore – no help at all! Sorry ifthis information is not good for you, but it is true! Don’t believed it : check THREAD ID:1-4N513T0 from 06.January and THREAD ID:1-4N0DM6A from 05. January. That’s why I need User help, notNokia help.

There were errors installing the software

Mac Mini G4 1.25GHz / 512MB / 40GB / Combo / Modem.
Ser: YM6***TAB
<Edited by Moderator: Personal Info - Please See Terms of Use>
Originally Mum's Mini was "doing strange things", so I had to drive 150 miles to try to sort it out.
First I downloaded AppleJack and tried it out on my own G4 Tower before heading north to visit Mum. Applejack installed OK from my USB memory stick.
Unfortunately, it didn't occur to me to take a spare keyboard and I was unable to get her Mac Mini (with a miniature keyboard) to respond to any key presses at start-up, which foiled all attempts to use AppleJack or even single user mode!
However, I was able to use DiskWarrior and it found several corrupted files on the Hard Drive, which it claimed (after two attempts) were repaired. I then "repaired permissions" and ejected the DiskWarrior disc. Then I had the bright idea of going to "Software Update" in the Apple Menu. This downloaded the latest OS10.4.11 and started to install it. After 20 minutes it reported that there was a "problem with installation" and I should reboot and try again, which I did, with the same result. So then I had the amazingly bright idea of erasing the drive and installing 10.4 from the original DVD. This got several minutes into the procedure before reporting a problem. "There were problems installing the software".
I gave up at that point, left Mum my iBook to use and brought the Mac Mini home.
I was able to boot it up from an external Firewire HD, which contained a clone of the boot drive from my own G4 Mac Mini. It seemed to work OK so I tried the Tiger installation DVD again. It failed as before but I was able to save the Crash Log onto the Firewire Drive and you can view it here:
http://www.amstard.co.uk/temp/OSInstallCrashLog.txt
(I hope this means something to somebody! The way I interpret it is that it installed a file then discovered that file was corrupted?)
I used Prosoft "Drive Genius" to erase the internal Hard Drive again and it reported that all was well. But I still couldn't install the OS.
After that, I couldn't even get the Mac Mini to boot from the external Firewire drive. It just produces a black oblong on a gray screen with a stalled "cog wheel". Here's a photo that I took:
http://www.amstard.co.uk/temp/screenphoto.jpg
There is nothing connected except the standard USB keyboard and mouse at this point and the external Firewire drive.
It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
I have "zapped the PRAM" without making any difference to this symptom.
I have tried doing the simplest installation without any additional fonts, language translators or bundled software.
Any suggestions - apart from "scrap it!"?
Martin (UK)

It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
Since this is an original G4 mini, there is no reason at all that any full retail 10.4 installer, or the original MacOS installer that came with the mini would not work. Later minis, released after Tiger's release date were in some instances unable to boot from the early versions of the Tiger retail installer because 10.4.0 or 10.4.1 pre-dated the versions those minis came supplied with, but clearly that isn't the case with your system.
If you are certain that the MacOS install disk you have is the one that original one that came with the mini (which should be a late version of MacOS 10.3.x), then the only obvious thing to check is that you have correctly partitioned the drive (it should be partitioned in the Apple Partition Map scheme, and then formatted as MacOS Extended (Journalled). If those parameters are met and you continue to get the error from a valid installer for that system, then the potential causes narrow to such things as defective install disks (unlikely since you have tried more than one), defective optical drive unlikely because you can boot from the install disk using the drive), or defective logic board/disk controller - which is a distinct possibility since it's possible that was responsible for the first drive failure (or the indications of failure).
Boot the system using the original MacOS installer and using Disk Utility, set the new internal drive up again with the APM partitioning and MacOS Extended (Journalled) formatting, then immediately run the 'Repair Disk' tool on it to make sure the drive is being read and written correctly. Then performa PMU reset (instructions below) to ensure that the failure to boot from the external FW drive is not a simple matter of dropped FW port. On rebooting with your FW drive connected, hold the Option key down to see if the system then recognizes your external drive. If it does, select it and attempt to boot from it.
With luck that will give you a working system, booted from your external, at which point I would then see if it's possible to clone your external to the new internal drive, rather than attempt a reinstall from the MacOS installer.
On the face of it there should be no reason that would not work since by booting from the MacOS installer you basically show that the system is sound and the optical drive is working. By partitioning and formatting the internal drive and getting a clean bill of health from the repair disk tool, you show the drive and disk controller are OK. That doesn't leave much else to be at fault!

There were errors installing the software Os x disk 2

Hey guys.
I run an older version of os x (10.4.8) on a Macbook as I have an old version of pro tools that I won't run on anything newer. I havn't gotten round to updating pro tools.
Yesterday, I tried to install the update for 10.4.11 since I'm not too bothered about pro tools anymore.
It took around 2 hours, then at the end seemed to stop without any confirmation of it's success.
After this, everything froze and I was forced to manually restart the macbook using the power button.
When restarting, I got a kernel panic error which asked me to repeatedly start the system.
Fed up with this, I decided to revert back to 10.4.8 by booting from the dvd, erasing the macbook harddrive and installing from scratch.
Disk one went fine, but disk 2 hangs up when installing garage band instruments, then I get the message THERE WERE ERRORS INSTALLING THE SOFTWARE. PLEASE TRY AGAIN.
I've tried this three times with no joy.
Any ideas?
Thanks

Hi Ibin5, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
It took around 2 hours, then at the end seemed to stop without any confirmation of it's success.
Hmmm, that's too long, might see this...
http://www.apple.com/support/macbook/hd/repairextension/
Also, That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442

'There were errors installing the software. Please try installing again.'

Can anyone provide a solution for a sudden problem I've encountered. It began when trying to install Backup 3.1 and has now been repeated with OS X 10.4.5.
When trying through Software Update I'm told The update [packagename] can't be installed. Sorry, an unexpected error occurred. The Installer package has been moved to the Trash. To try again, open the package from the Finder.
When I try opening the Installer packages from the Finder the Installer reaches the stage of 'preparing target volume' and then displays this error: There were errors installing the software. Please try installing again.
Installer's Error Log says: Install failed: The following install step failed: run preflight script for [packagename].
Console.log contains this:2006-02-15 21:07:27.431 Software Update[331] session:product:061-2046 didFailWithError:NSError "Error SUSessionErrorDomain 6" Domain=SUSessionErrorDomain Code=6 UserInfo={errorCode = -2; }
Unsuccessful steps I've taken to resolve this issue have been: (1) I trashed com.apple.installer.plist, (2) I repaired disk persmissions; (3) I repaired the disk (when I did so, Disk Utility reported that no repairs were necessary); (4) I restarted in Safe Mode; and (5) I tried installing using a different User account.
Anyone?

Since first posting, I learned of further updates being available in Software Update (all the iLife '06 suite, basically). Horrified, I suspected that my Installer problem would rear its ugly head again with these, and sure enough that's precisely what happened. As a test, I unchecked all but one of the new items in Software Update and tried installing that. The exact same problem reoccurred.
Fortunately I also have an iBook G4 on which I had earlier run a successful upgrade to OS X 10.4.5. I ran Software Update on that machine, installed everything successfully, and then used Target Disk mode between iBook and iMac to first install 10.4.5 on the iMac and then to copy over the new versions of Backup, iDVD, iMovie, iPhoto, iTunes and iWeb. So my iMac is now up to date, but only by intervention of another machine. My original question remains: what could be causing the problem with Installer?
Thanks Jpfresno for your response. The only part of it which I had not tried was disconnecting my external Firewire HD before running Installer.

Win OS could not start becasue of error in the software on Satellite A85-S107?

Windows could not start because of an error in the software. Please report this problem as:
Load needed DLLs for kernel.
Please contact your support person to report this problem."
A blue screen was suddenly pop up when i was surfing a website, the above warning in black and white was showed after i took out the battery and restarted the windows.
I thought it was just a simple step if i took out the recovery disk, but i was wrong.
The recovery procedure was doing fine to 100% finished. But after pressing any key, the above warning kept appear, no matter how many times i had re-installed by recovery disk or (every time reached 100% )or by using full version of window Xp.
Neither it worked by formatting the HD I had connected it with a IDE2USB link to my friend's XP laptop nor changing another HD.
I excluded the HD problem, then i guess it might be the BIOS was being hacked (?) I downloaded the BIOS update to see whether it works or not?
but the result was disappointing. It just stop at the step 4 of the updating procedure, it just freeze at performing flash initiating step.
I want to take out the CMOS battery for few seconds, but i am not that pro and i might cause damage by improper handling.
Could anyone tell me what happen to my computer and how i can show the above problem?

Hello Wai
If your unit make troubles after recovery image installation it is probably hardware related issue. Can you enter BIOS settings as usual? If not I am afraid the BIOS chip is damaged. It happen if BIOS update is interrupted whatever the reason can be.
Removing CMOS battery doesnt work like on desktps. Forget it!

My hard drive had to be recently reinstalled with the software being 100% totally new. I therefore do not have iwork 09 which was purchased as a family pack. How can I download and reactivate it?

My hard drive had to be recently reinstalled (5 days ago) with the software being 100% totally new, and totally up to date.
I therefore do not have iwork 09 which was purchased as a family pack (via download). How can I download it again without purchasing, and reactivate iwork09? It does not show up in my App store under purchases, as it was purchased a few years ago.

It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
You can transfer itunes purchases fom an iphone: Without syncing : File Transfer Purchases
or you can redownload them. Open itunes store, click Purchased, under Quick Links.

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesen't wor at all.

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?

Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list.

Size error with the "Software Projects" example

Similar Messages

Maybe you are looking for