Size of the side & filmstrip/top panels should save upon exiting LR.

Sorry if this is a repeat... I couldn't find it in a search. Really basic one: Its a real hassle to have to resize all of these each time you start LR... I couldn't find anywhere to "save your workspace", but maybe I'm just dumb?

Cool - that is really good to know! Kind of a pain to resize left hand pane all of the time so I can see my full folder names, etc.

Similar Messages

Error Code - client cache is smaller than the size of the requested content

Even though we have increased the size of the ccmcache via Control Panel > Configuration Manager, we still get the Error Code 0x87D01202 (-2016407038) "the content
download cannot be performed because the total size of the client cache is smaller than the size of the requested content" The CCMEXEC Service and computer have both been restarted, after increasing the ccmcache size. Which local log
file under C:\Windows\CCM\Logs should we check for more information ?
Thanks

so when you re deploying the client go into your settings and set the variable below:
smscachesize=10240
note:
SMSCACHESIZE
Specifies the size of the client cache folder in megabyte (MB) or as a percentage when used with the PERCENTDISKSPACE or PERCENTFREEDISKSPACE property. If this property is not set, the folder defaults to a maximum size of 5120 MB. The lowest value that you
can specify is 1 MB.
Note
If a new package that must be downloaded would cause the folder to exceed the maximum size, and if the folder cannot be purged to make sufficient space available, the package download fails, and the program or application will not run.
This setting is ignored when you upgrade an existing client and when the client downloads software updates.
Example: CCMSetup.exe SMSCACHESIZE=100
Note
If you reinstall a client, you cannot use the SMSCACHESIZE or SMSCACHEFLAGS installation properties to set the cache size to be smaller than it was previously. If you try to do this, your value is ignored and the cache size is automatically set to the last
size it was previously.
For example, if you install the client with the default cache size of 5120 MB, and then reinstall the client with a cache size of 100 MB, the cache folder size on the reinstalled client is set to 5120 MB.
Twitter: @dguilloryjr LinkedIn: http://www.linkedin.com/in/dannyjr Facebook: http://www.facebook.com/#!/dguilloryjr

Sides and top cut off on my 1080i TV

Watching the election coverage and they have all the graphic data on the sides and at the top. On my 1080i 56" TV the sides and top are partly cut off but if I watch my 720p 24" TV the graphics seem well placed. Anyone know what might be the issue?
BTW the 720p is a LCD and the 1080i is a rear projection.
Thanks

It sounds like your 1080i TV has an unusually large amount of overscan. Overscan is the part of the screen that your TV cuts off.
Plasmas and LCDs typically have relatively low overscan (between 0% and 6% total cut per dimension), while older CRT projection displays can have closer to 10% overscan. You should make sure you are in 1080i mode on your 56" TV.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

# of objects, not the size of the objects, determine size of a Collection

There are objects, and references to objects.
Do, List / Set / Map , etc. just maintain a list of 32-bit addresses for their contained objects? What more does a Collection need, memory-wise, to add an element? The size of the objects in a Collection should not matter?
listA.add(new Integer(2)); // listA size grows by 32-bits
listB.add(new GiantSizedClass()); // listB size grows by 32-bitsI started thinking about Collections being able to dynamically grow in runtime. I heard this is complex, but it "looks" like all you do is append a memory address and incriment a counter? This sounds quick, easy, and incorrect. I don't understand. Thanks.

jverd, ejp: you have always been there with quick responses to help me. ejp, i purchased your book "Fundamental Networking in Java". When I start programming again, your book about RMI is on my list. that said.
with all sincerity. i belived that serliazing objects in byte[] allows for storing objects in objects, not object references in objects. here is my test code (just cut/paste):
My idea seems similars to me as cryogenics and so that is the theme of my test code (and it is my favourite movie). note: this code is "proof of concept" and is exetremely hacked together.
public class Test {
private static HashMap<String, byte[]> barracks = new HashMap<String, byte[]>();
public static void main(String[] args) {
    try { new Test().go(); }   catch(Exception e) { e.printStackTrace(); }
public void go() throws Exception {
    Employee empl = new Employee("Dallas", "Captain");
    barracks.put(empl.name, cryogenicallyFreeze(empl));
    empl = new Employee("Kane", "Navigator");
    barracks.put(empl.name, cryogenicallyFreeze(empl));
    empl = new Employee("Ripley", "First Officer");
    barracks.put(empl.name, cryogenicallyFreeze(empl));
    empl = new Employee("Ash", "Science Officer");
    barracks.put(empl.name, cryogenicallyFreeze(empl));
    System.out.println("___log file___");System.out.println(".........");
    int id = (int) (System.currentTimeMillis() % barracks.size());
    System.out.println("[Nostromo]: emergency id #"+id+". Re-animation initiated...");
    switch (id) {
      case 0: empl = (Employee) reanimate("Dallas"); break;
      case 1: empl = (Employee) reanimate("Kane"); break;
      case 2: empl = (Employee) reanimate("Ash"); break;
      case 3: empl = (Employee) reanimate("Ripley");
    System.out.println("[Nostromo]: \"" + empl.name + "\" in command.");
    System.out.println("["+empl.name+"]: Hello. I was an object, not a reference, stored in a collection.");
    System.out.println();
    public static Employee reanimate(String name) throws Exception {
        PipedOutputStream pout = new PipedOutputStream();
        PipedInputStream pin = new PipedInputStream(pout);
        byte[] frozenEmpl = (byte[]) barracks.get(name);
        pout.write(frozenEmpl);
        ObjectInputStream ois = new ObjectInputStream(pin);
        return ((Employee) ois.readObject());
    public static byte[] cryogenicallyFreeze(Employee emp) throws Exception {
        PipedOutputStream pout = new PipedOutputStream();
        PipedInputStream pin = new PipedInputStream(pout);
        ObjectOutputStream oos = new ObjectOutputStream(pout);
        oos.writeObject(emp);
        byte[] frozenEmpl = new byte[pin.available()];
        pin.read(frozenEmpl);
        return frozenEmpl;
      public static class Employee implements Serializable {
        String name; String title;
        Employee(String n, String t) { name = n; title = t; }
}"inside" of each byte[] object is an "Employee" object? I can't see it any other way. But I am not the sharpest pencil in the drawer...I'm on vacation from coding for a while. maybe i will get it when i start again. thanks.
Edited by: rdkh on Jan 29, 2010 3:53 AM

How to freeze a scene push it to left and make another scene appear at the side when doing a split s

Hello everyone,
I am new to the editing world. I am just trying out various options in Adobe premier pro cs 5.5. Here is the scenario.
I have four videos. I am able to do a splitscreen using scaling in the effects control. I am also able to crop the black bars using the crop tool. I did those, placed all the four videos one above the other in the timeline, and made all the four to appear onscreen in the form of a grid with two videos aat the tp and two videos at the bottom.
What I don't know
When a video is playing in full screen i need that video to be paused and pushed to the left. then the next video should start playing in the size of the remaing screen and it should then be pushed to the left. This should end after the fourth video ends. See the video below to get and idea of what I want.
http://www.youtube.com/watch?v=QEAPi0Ht2eU
Please send me a tutorial or video or guideline or anything that would help.
Thanks,
VJ

No tutorial or video, but experiment with motion/position, keyframes and freeze frame.
Look at https://vimeo.com/1954849 to see what you can do with position, crop, keyframes, etc.

Finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

This problem occurs after I move a file or files to trash. If I remove one file, then the sequence is one file off, if I move two files to trash then the sequence istwo file off. For example, if I delete file 1 and highlight (click on) file 3, then the cover flow panel shows file 2, when it should show file 3.

How do I safely get the side panels of the printer off

How do I safely get the side panels off the printer. I am attempting a repair and do not want to break them

The thin strip is called the encoder strip. It has very fine lines that are used to keep track of where the carriage is as it moves across the paper. You should not need to remove the sides to replace this, but it can be a bit tricky. The post here may help. Be sure the encoder strip is properly threaded through the sensor at the back of the carriage.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

The little lock has nothing to do with speaker volume. It means you have locked the rotation on your iPhone.
Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls?

There is a tiny gap all around the side of my ipod between front aluminium panel and stainless back. Is it normal?

I just bought an Ipod classic and noticed that there is a tiny gap all around the side of ipod between front aluminium panel and stainless back.
Is it normal?
I am just concerned because when I was given the box at the Futureshop, the box had a big dent on the side.
(as if the box was dropped from 2-3 feet high atleast)
I was wondering the dent would've done something to make that gap on my ipod.
I am thinking to return it if it is defective
Any advice?
Thank you

Return it, there should be no gap, for creeepy crawlies to go in and make nest and poop on your iPod circuit.

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program.

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program. This is the first time I have any problems with Aperture.
I run aperture 3 on OS X 10.7 iMac 27" 2.8GHz i7 16GB.
Thanks for any help.

You have to change the cursor focus.
What I usually do for PDF pages/tabs, is click in the URL/location bar, then F11.<br />
For Flash, if you click on the page outside of the video area/box, F11 should work.

MY IPHONE HAS A VERY THIN GREY "DEAD" LINE ON THE TOP, AND ON THE SIDES.

My iphone has a very thin grey dead line on top of the screen, and on the sides, so in sunlight, it looks as if the screen is smaller than it should be, but these grey lines dont affect my touchscreen or visability, so a simple yes or no, do all of u guys have it??

Thanks dude, thats such a relief, i always thought that was a fault in my iPhone, thanks for reducing my sleepisness
Anyway, just to confirm things, i did look closely at an iphone picture on Apple.com, and i did find that thin "apparently black" part i was talking about!
Peace out guys, and thanks again!

Please make it harder to lose the side panels

Am I alone in this?
Countless times I go to click on the scroll bar (left or right, doesn't matter) and instead I accidentally move the mouse "just a little too far" and click to hide the panel instead of clicking the scroll bar.
The thing is, it wastes valuable time having to then go and unhide the panel and return back to what I was doing.
Could we either make the scroll bar slightly wider (making it easier for me to "get it right") or perhaps have an option to only hide the panels by keystroke instead of by clicking on them? I do like to hide the panels ... but it's extremely rare because I need the panels there while I'm in the develop module in order to access presets or develop settings.
Maybe in the develop module turn off the ability to hide the panels? (or, again, make it an option to do so)
It would sure save me a lot of aggravation.

>@Ian Lyons: I can't drag the panels but the scroll-wheel on my mouse works fine...far better than it did in LR1.
Agree--when LR is on the main display, but the scroll wheel does NOT work for scrolling the panels when LR is on the 2nd display. I don't know if this is intentional or an oversight or just a situation I experience, but I have experienced it with all versions of LR and in both XP and Vista.
Note that the scrolling of the side panels isn't the only thing that doesn't work properly with the scroll wheel when LR is on the 2nd display--the thumbnail panel doesn't scroll when on the 2nd display, either. However, using the scroll wheel to adjust brush sizes works fine on either display as does scrolling the thumbnails in the Grid view.

The green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.

Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
MacBook

Bookmarks opens in a window 2/3's the size of my screen since the latest update. Now the first bookmark I scroll over covers the whole window instead of too the side and I can't close it without closing the bookmarks window

I kept getting a reminder I had a Firefox update I needed to install. I did last night but never opened Firefox again till this morning. Now when I click on bookmarks for the drop down it opens a window almost 2/3's the size of my screen instead of the narrow window it has in the past. Now as soon as I move my mouse over or close to any bookmark it opens up that bookmark in the window and I can't access the bookmark I want. I have to close the whole window and then be very careful as I move my mouse to the correct bookmark. In the past with the narrow window it opened the bookmarks to the side and only after you clicked on them. I have tried to resize the window but can't find any option to do so. Also couldn't find an option that would let me change it so a bookmark had to be clicked on. If this can't be changed I will be removing Firefox. This is too inconvenient for me.

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

When creating a new DPS should I use sizes offered by InDesign or the display size of the device?

Hello all,
When creating a new DPS, should I use the sizes offered by InDesign or the display size of the device? I ran into this question when I was looking up the sizes of different devices and found that iPhone 5s, iPhone5c, and iPhone4s sizes differ than the defauly dimensions offered by InDesign.
Also, should I worry about the ppi resolution? With iPhone, they all seem to be 326ppi but when dealing with other devices is this something that I should take into consideration? Ideally, I could be creating DPS apps for all devices offered in the Digital Publishing drop down in InDesign (iPhone, iPad, Kindle Fire/Nook, and Android).
Thank you for any help you can provide.
By the way, if it helps I am using InDesign CC.

Using 1024x768 and creating PDF articles will get you OK with both iPad resolutions, and, as Bob L. says, quite decent "one size fits all" result for all other devices.

Size of the side & filmstrip/top panels should save upon exiting LR.

Similar Messages

Maybe you are looking for