Sizing TREX-Server
Hi everybody,
hope someone can help me regarding TREX installation in a Non-Portal-Environment.
Our customer has a content of about 400GB, which is to be indexed. Questions:
1) Which experience you made when installing TREX Server in the case of needed RAM, HDD, and CPU?
2) How easy or difficult is it to implement a distributed TREX scenario? I already checked the SAP Material, but as you know they always explain it on high level.
3) Can TREX also search for DMS content in an Archive-server? Our server is connected over HTTP. First I heard, yes it is possible, now I heard it's impossible. Maybe there exists a workaround.
Thanks for your answers and help.
Hi Kruno,
on http://service.sap.com/sizing you will find a sizing paper for TREX 6.1 in the Media Library. That should answer 1).
2) The documentation on "Scaling TREX" (6.0) and its eqivalent for TREX 6.1 "Conf. Guide - Distributed TREX 6.1 Systems" that can be found http://service.sap.com/instguides are actually rather detailed. What kind of info are you missing?
3) Should be answered by a DMS contact hopefully as TREX does not take care of the connectivity itself.
Regards, Karsten
Similar Messages
-
How can I calc sizing of TREX server
Hi,
I'd like to use succession management and
I'd like to install minimum sizing server and I can find the doc of sizing nakisa server as below.
https://websmp209.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000728933&_SCENARIO=01100035870000000202&
But I couldn't find about TREX server doc from here.
How can I size of TREX?
Which sizing is the best for minimum spec?
Hope you can help us!!
Best regards,
MakotoHi Makoto,
SAP recommends using the Quick Sizer Tool in http://service.sap.com/sizing to size your hardware.
For other information check out the TREX 7.1 documentation here:
[https://websmp202.sap-ag.de/sapidb/011000358700000854952007E/TREX71InstallSingleHost.pdf|https://websmp202.sap-ag.de/sapidb/011000358700000854952007E/TREX71InstallSingleHost.pdf] (single host)
[https://websmp202.sap-ag.de/sapidb/011000358700000854982007E/TREX71InstallMultipleHosts.pdf|https://websmp202.sap-ag.de/sapidb/011000358700000854982007E/TREX71InstallMultipleHosts.pdf] (multiple hosts)
I hope that helps!
Luke -
How can I measure TREX server.
Hi,
I'm from Nakisa forum as below.
<How can I calc sizing of TREX server
I'd like to install minimum TREX server for Nakisa.
A document of nakisa is written about nakisa server but it isn't written trex server.
<https://websmp209.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000728933&_SCENARIO=01100035870000000202&>
I found SAP note 1266024 which is written about sizing guide line of Nakisa but it's so difficult to calc.
How can I measure TREX server and which minimun sizing is best to use Nakisa?
Hope you can help us.
Best regards,
MakotoHi Makoto,
try the infos for TREX under http://service.sap.com/sizing.
They are not made for Nakisa. But I am sure you will be able to roughly map them to your use case.
best, Karsten -
Importance of TREX server and services for Services registry
Hello All
Is a TREX Server and TREX services mandatory to be able to connect to the services registry??
Because I have no trex server and when i browse the services registry , no results are yielded..
Need information on the TREX and relation with the registry.
Thanks
VijayTREX is not mandatory to connect to Service Registry. But to Search a service in the registry, TREX is used in the backend.
Regards,
Prateek -
How the CRM data is transferred (initial load) to TREX server in CRM EHP1
Hi Guru's
I am working on HV segmentation first time and would like to know, how the CRM data is transferred (initial load) to TREX server in CRM EHP1, if we create the 'Data source for HV - Attribute set / Inforset' will that transfer the data to TREX server or do we need to perform Initial load by execute by batch program / Transaction.
For the update (delta load) is the program : CRM_MKTTG_TREX_UPDATE to update the BP data, can we also add other objects (Transactional data) for delta load.
Regards,
Ajay KumarHi Ajay,
Yes you are right the Report CRM_MKTTG_TREX_UPDATE is used for Full load (inital load) for HV segmentation data.
Both Full and Delta load is suggested to be performed in background. You can use the options "Business partners" and "Marketing permissions". For BP's you can use Delta upload with further options:
Synchonize Business Partners Beforehand
Force Update
Offset for Delta Table Entries (in sec.)
You can also "Define Delta Source Objects for High Volume Segmentation" in SPRO > MKT > HV segmentation.
Here you can set relevant data source objects that is available for delta upload.
For more details refer to documentation next to the customization entry.
Hope this information helps you.
Regards,
Anup -
E-Recruitment - Resume scanning by Trex server
Hi Experts,
In E-recruitment, can TRex server search a string through attached resume? If yes, what are the pre-requisites? any configuration requirement?Hi,
it is standard functionality in e-recruiting. Go into IMG into E-Recruting -> Talent Warehouse -> Candidate Search -> Search profiles. You will find a step for "Assign attachment types to search profiles". There you can define the searchable attachments. But it just works if you create search indexes as described in the IMG or indexing notes for component PA-ER in service market place.
Best regards
Sebastian -
Where are TREX index stored? TREX server File system? or KM repository?
hi, friends:
can someone tell me where are TREX index stored ?
in TREX server file system?
or in portal KM repository? file system or DB?
thank you
CarolCarol,
TREX is a separate product. During installation and configuration of TREX you connect it to the portal. The search iViews of the portal will use the configured TREX server to do the actual search:
SAP Help: http://help.sap.com/saphelp_nw70/helpdata/EN/a4/929d4206b70931e10000000a1550b0/content.htm
The index is stored on the TREX server: TREX/IndexServer/basepath/index=%(SAP_RETRIEVAL_PATH)/index
SAP Help: http://help.sap.com/saphelp_nw70/helpdata/EN/4c/d91e40777cdd5fe10000000a155106/content.htm
br,
Tobias -
Search-Function without TREX server ?
Hello to all,
I want to use the Search-Function but we don't have a TREX server. Can I nevertheless use it? Which iView can I take? And which settings do I need?
Are there guidances for it?
Thank you and regards.
GalynaGalyna,
No unfortunately you cannot - TREX is required for search functionality and as such there is nothing else built into Portal/CM that will do the same thing.
I would guess it is not worth your effort trying to do your own thing !!!!
Haydn -
Hi,
We have TREX 7.0 installed in Solman. We have configured our SRM system to use TREX. Now we would like to bring the TREX server to the same system where SRM runs (SRM 4.0).
So there would be a server hostname change (From SOLMAN to SRM) for TREX configuration.
I have checked the URL in help.sap.com (attached below) which explains the "Changing the TREX Host Name (Single Host)", is it the only changes I have to perform for this switch over?
http://help.sap.com/saphelp_nw70/helpdata/en/47/1b074063616446e10000000a114a6b/frameset.htm
Please advice.
Thanks
ShylHi,
Regarding the change in TREX server, please go through the below details and provide your inputs on the same,
Current Scenario:
TREX 7.0 is installed in Solution Manager system.
TREX is used by SRM and PI applications through RFC.
Requirement:
TREX for SRM should be moved from existing Solution Manager system to SRM server.
Question:
As per help.sap.com for host name change for TREX servers, it is mentioned only change the host name in TREX configuration files and Profile settings. But we have installed TREX 7 only in Solution Manager. We have older version of TREX in SRM server. So if we follow help.sap.com and change the files and move the file systems related to TREX 7 from Solution Manager to SRM system, is that the only change we have to perform?
OR
Do we need to install TREX 7 in our SRM server and then move related file system to the installed SRM server?
Please note that after the move also, TREX which use in PI application should work as usual.
I welcome all your inputs on this subject.
Thank you in advance.
Regards,
Shyl -
How to install the TREX server
Hello,
Cam any one explain me how to installl and configure the TREX server in portal.
Thanks in Advancehi,
TREX is a standalone server which indexes the documents in the repositories.TREX is based on a client/server architecture. The client software is integrated into the
application that uses the TREX functions, and allows communication with the TREX servers.
The TREX servers execute the requests of the clients: They index and classify documents
and respond to search queries.
Look at
service.sap.com/instguidesNW04 -> Installation ->Installation Guide Search and Classification TREX 6.1 .
Regards,
Ganesh N -
Same TREX server for KM indexing and e-Recruitment
Hi,
Is it possible to use the same TREX server for KM indexing on the portal and e-Recruiting searches on R/3?
Many thanks
JaneHi,
in general and from a technical view it's possible.
But it depends on the load of the applications, perhaps it's a better approach to separate them e.g. for a productive environment.
Regards, Thorsten -
Hi Exports
I am working on Solution Manager 7.0 EHP. we want to install trex server, my question is do we require any additional software licensing for this installation from SAP. consider it as high priorty
Regards
SubbarajuWhen you mention 'other activities'... what exactly? If I remember correctly, the Solution Manager license agreement includes clauses about using the Solution Manager technology components only in the Solution Manager, not externally. As an example, the CRM functionality included with Solution Manager should not be used outside ChaRM, Service Desk and Maintenance Optimizer, I would assume that the same applies to TREX within Solution Manager.
In any case, the Service Desk usage of TREX is included in the Solution Manager license, for the 'solution database' functionality.
Best regards,
Miguel Ariñ -
Hi all DMS Guys
I am Carrying out implementation of DMS , Content Server, and Trex server for the first time.
I have completed DMS , and Content Server configuration.
I want Information on Trex server configuration or some documentation on TREX server configutation and installation.
If any body can pls help me urgently it would be great help.
Thanks
With Warm RegardsHi Mangesh,
If you are looking for a Search Option to be activated in DMS then its very simple,
Go To T.code SKPR07 (KPRO IMS: Monitoring), select Tools tab,
and in Document Class Field Select : Select "DMS:Physical Object for main Originals"
2. In Main menu under Edit select Administration, you get an POP-Up menu of Administration, fill "Document Class" (DMS_PCD1), Document area (DMS), Management table (DMS1DIDSTA)
Check (tick) "Create Indexing Readiness"
Click on the "Indexable Attributes" you get the sub-screen select all or required one.
You can schedule the indexing job by two ways i.e. by ABAP program RSTIRIDX with a T.Code SM36. click on job wizard & Proceed.
After doing all above steps you can see in CV04N SearchTxt Field
Regards
Rehman
Reward Your Points If Useful -
Does the netweaver Sp14 trial version include TREX server ?
HI ,I download the netweaver Sp14 java trial version ,I found the install description include the TREX.
But when I installed sucessfully the netweaver ,I found the the trex server is not installed in the netweaver,
Is that mean if I want to do some index on KM ,I have to find the license to install TREX server,then I can use trex in the netweaver ?Hi,
I think TREX is an individual installation. Check the installation guide for the package you downloaded. You can check them from http://service.sap.com/instguides
Regards,
Harini S -
hi,
we are running ECO 50 with CRM 5.0.
I replicated the complete catalog to the TREX server and now I am looking for a possibilty to browse the catalog at the TREX server. I would like to see which attributes are replicated to the catalog items.
At version 4.0 for R/3 I could use the webapplication trexadmin to browse each catalog. Does someone know a similar tool for the CRM catalog?
Regards
MichaelHi,
Use SRMO and SRSE transactions to look for the attributes. Both A and P index are visible in both the transactions.
In SRMO go to Index tab choose your replicated catalog and dispaly. You will be able to see all the document attributes.
In SRSE you can search for products or areas by providing the search criteria.
Regards,
[Sateesh Chandra|http://sateeshchandrach.googlepages.com]
Maybe you are looking for
-
When I open Mail, all accounts appear offline. I have to get back "online" before mail is delivered or sent. Hassle. Any Ideas?? joehouston
-
Problem with analysis authorization- 0BI_ALL always needed
Dear all: we have a serious issue on so-called "analysis authorization" now. We have auth-restricted user who only have authorization to access data on one company code. We also create a BI-authorization in analysis authorization and assign the follo
-
Can't get my iPhone 4s to print with my new Airport Extreme Router.
-
Can the directory ( where oracle db 9 is installed ) be deleted after the upgrade to 10g in a separate directory ? The tablespaces/customer data from db9 are also installed in separate directories.
-
Hello, everyone. For some reason, my DW has "Split Vertically" default selected every time DW loads. When I want to split view, it's always initially vertically split. This is annoying me. I would like for the split to be horizontal, always, and if