Skip forward/back function

Anyone else got a problem with the 'skip forward/back' function on the youview remote since the last upgrade? Sometimes if I'm watching a recording and press the 'skip forward' button once, the recording skips forward 1 minute and then keeps on skipping repeatedly until it reaches the end of the recording. The same thing happens if I press the 'skip back' button, except it repeatedly skips back in 15 second intervals, again until the beginning of the recording. And no, the buttons are not sticking down! The only way I can find to stop it is to press the 'stop' button, and then scroll back to the appropriate point in the recording and start again, very annoying.The problem does not occur on every occassion, but certainly more than 50% of the time. If you press the 'skip forward' button on a live programme (although I'm not sure why you would want to, I just tried it as an experiment), the box just keeps repeating the last couple of seconds of the programme adinfinitum, when the problem is not present the programme pauses for a second and then continues.

Just seen this reply from the official YouView rep
"Our development team have just found the problem, and have sent the software changes to Humax and Huawei. Unfortunately, we're right in the middle of a development cycle so we won't be able to send out an update for a couple of months. Sorry it's not better news on the timing."

Similar Messages

Skip forward on active recording bug is back!

You remember? The one where you go to skip forward on an internet channel recording and instead it throws you back to much earlier in the recording? Well it is back. Just had it while chase playing the Chelsea v Everton match on BT Sport 1 and went to skip over the half-time punditry.
You have to wonder if whatever they did to fix the two minute recording bug has broken this again.

It was never fixed as far as I am concerned. I have always had it, whenever you get to within 10 or 15 minutes of the live the first time you hit ff it jumps back 10 minutes.

How can I disable the mouse button 4 and 5 "forward" and "back" functions through firefox?

I've seen this problem come up on forums before but was unable to find a good solution.
When using Ventrilo, I have my speak button bound to the mouse button 4 of my logitech mouse. This button is conveniently placed for gaming because it makes use of my otherwise unused right thumb, and I have been using it for years and probably couldn't adjust if i tried to change it.
Firefox uses mouse button 4 for the "back" function, meaning that if i'm on ventrilo while browsing the web with firefox, i have to remember to move the cursor to the menu bar at the bottom of my screen or go back a page. it's infuriating if i forgot, especially if i'm playing some sort of browser game at the time, as i basically have to restart whatever i'm doing.
The only solutions i've found for this involve binding mouse button 4 to some other (rarely used) key, which is an annoying solution at best, or changing some vital computer files, which I dont have the expertise to do myself and dont trust anyone else to do for me. It's an absolutely unacceptable solution anyway: why should i have to change my computer's files to disable a function which should be editable through firefox?
does anyone know how this can be fixed? or know how we can get mozilla to put this feature into some future patch, as other people have been asking them to do for YEARS?

This can be a highly frustrating problem. I just spent 45 minutes working on an email. Nearing the end I go to grab my mouse after typing and accidentally hit mouse 4 and lose everything. This isn't the first time I have lost work or an email. I would say the ONLY reason why there currently lacks a strong feedback against this is because the majority of people do not have mouse 4+5 buttons on their mice. Please add the option to just disable this "feature". It's just far to easy to accidentally hit these buttons accidentally and potentially lose a lot. I don't know anyone who actually uses these buttons anyways.

Auto Skip Forward Button appearing to stick

I;ve just started to use my BT Vision box and have a very annoying problem.. whenever I use the skip forward button to get through adverts it just continues to skip right through to the end of the recordning... Is anyboy else getting this issue.??? Should I return the box.???
Any clues.?????

You're not alone - its a bug
http://community.bt.com/t5/YouView-from-BT/Skip-forward-back-function/td-p/758040

How To use the going back function in Safari (multitouch)? Going back on Websites ist only possible using the arrow Key on the left corner but not by using the sweep function like it is possible in macOS.

How can i use the going back function in Safari like it is possible in MacOS? On the Mac i can chance back to previous Websites by sweeping with two Fingers. Unfortuntely is this Not possible on the ipad. I tried with one and to fingers but it doesn't work.
The multitouch function is switched on but still Not working. What is wrong? Thx for help.

To go back a web page in Safari touch the screen with one finger at the extreme left and swipe to the right.
To go forward a web page in Safari touch the screen with one finger at the extreme right and swipe to the left.

How Can Viewers skip forward and backward between timelines!?

You can skip forward and backward through chapters that are on the same timeline but I can't skip backward to a timeline that came before the one I'm on. I thought this was an easy question someone must know the answer to this. I just need to check what I'm saying.
So I have 4 timelines
I put chapter markers at the end of each timeline so that people could skip forward to the next timeline if they wanted to. If there was no chapter marker at the end of the timeline then the timeline would have to be played to completion before going to the next. You would not be able to skip forward at all. The problem I'm having is that you cannot go backward to the timeline that came before.
So if I have a chapter at the end viewers are able to skip forward to the next timeline but they can't skip back.
Alright so Menu Remote settings do not work for Blu-ray discs either so you cannot use that setting to go backward from one timeline to the previous.
Is there anywhere to set that the first chapter of one timeline can somehow link back to the last chapter in a previous timeline or is it just impossible to go backward?
Isn't there anyone who knows how to skip backward from one timeline to the previous? I cannot find a action for this in encore.

Hi simonfrommount isa,
I'm sorry to hear you are having issues with the most recent iOS update. If you are still having issues with the connection or controls from your iPhone to your car stereo, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting car stereo connections - Apple Support
Regards,
- Brenden

Forward/Back button behavior updated in v. 2 release?

Hi, does anyone know if the button behavior on the remote control has been updated in the new software release? Previously when watching recorded videos it skipped forward in three minute increments. While paused it would jump 10 seconds I think.
Skipping forward thirty seconds would be a lot better for me.
Thanks,
John

Lars Stokholm wrote:
Hi, after I upgraded GTK2 (2.20.1-2 -> 2.22.0-2) my forward and back button in Firefox disappeared. When I start Firefox I get these errors:
(firefox:4659): Gtk-WARNING **: Error loading theme icon 'gtk-go-back-ltr' for stock: Icon 'gtk-go-back-ltr' not present in theme
(firefox:4659): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(firefox:4659): Gtk-CRITICAL **: gtk_default_render_icon: assertion `base_pixbuf != NULL' failed
(firefox:4659): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed
(firefox:4659): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT (object)' failed
(firefox:4659): Gtk-WARNING **: Error loading theme icon 'gtk-go-forward-ltr' for stock: Icon 'gtk-go-forward-ltr' not present in theme
(firefox:4659): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(firefox:4659): Gtk-CRITICAL **: gtk_default_render_icon: assertion `base_pixbuf != NULL' failed
(firefox:4659): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed
(firefox:4659): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT (object)' failed
I just updated my system and I'am now a bit confused. I have exacly same problem. Can anyone help?
Last edited by amen (2010-10-04 20:32:05)

How to achieve Fast-forward/rewind functions when using VideoDisplay

I use "VideoDisplay" instance for progressive download of
videoes from a server. Is anyone know how to add
fast-forward/rewind functions using Actionscript 3 with
VideoDisplay object?
or is there anyway to do it when playing videoes through
progressive download?
Thanks in advance.

Matt,
Thank you very much for your help. The thread is quite
interesting.
I can only make the video jumping forward/backward at the
step of 10 seconds by changing VideoDisplay's "playheadTime"
property. When I set the step down to 1 second,
the video is "frozing", and the playheadTime is going 1
second forward/backward, then return back to where it is, and going
1 second forward/backward, then return back to wheare it is again,
and repeats forever.
For the FLVPlayback class, it is not available in Flex
builder 3, why?
Thanks again,
Regards,
Fan

I have an older nano (4th gen?) and it will not shut off and when you try to skip through songs it skips itself back. Buttons seem to be pushing themselves. I've tried doing a hard reset and it did not work.

My older nano is not working. I have to keep it plugged in all the time because it does not shut off. The buttons only work sometimes and then they scroll and skip forward and backward by themselves. I have checked updates and I have also reset it back to factory and it is not working.

Hello mistymorrill
If after all that you have tried and your iPod nano is still not working, the refer the page below for further options.
Service Answer Center – iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I cannot watch any TV shows on Itunes. The episode will play for a few seconds and then freeze and skip forward randomly. I have a Windows 7 PC and I didn't have problems before the Itunes 11 update. Any ideas?

After updating to ITunes 11 a while back, I am no longer able to watch TV shows on my laptop. If I try to watch an episode, it freezes and then skips forward randomly. I have a Windows 7 laptop and I didn't have any problems before ITunes 11.

I don't use a graphics card, I use on board graphics as my computer case is too small to fit a graphics card inside.
There are no effects applied to the clip, only one layer of video and 1 layer of audio (both from the same file). The video is in MP4 format at 720p.
Before I rendered the sequence, I had a yellow bar above the sequence. Also, I imported the same clip into CC Standard and it played fine (also had a yellow bar) with no lag.
I think I've fixed the issue now as rendering the sequence made the video play smoothly with no apparent issues.
If any other clips have lag or any other problems in CC 2014, I'll just import them into CC standard and see if that works.

Forward/ back button for various sub-folders

Hello all,
Here's the scenario.....
I have a forward and back button that load several images in a sub-folder that load to a UIloader....
next_btn.addEventListener(MouseEvent.CLICK, nextImage);
function nextImage2(evtObj:MouseEvent):void{
imageNumber++;
LargeImageLoader.source = "portfolio/UIloader/bike/00"+imageNumber+".jpg";
checkNumber();
back_btn.addEventListener(MouseEvent.CLICK, backImage);
function backImage2(evtObj:MouseEvent):void{
imageNumber--;
LargeImageLoader.source = "portfolio/UIloader/bike/00"+imageNumber+".jpg";
checkNumber();
Since I have multiple sub-folders for my portfolio, I was wondering how to apply these same buttons to other sub-folder image paths without needing to create a pair of forward/back buttons for each sub-folder.
Thanks!

It's not entirely clear to me, but what I think you need to do for what I think you are saying you want to do would be to make the folder targeting (portfolio/UIloader/bike/, et al) a variable as well. The only missing link is what you would use to redefine the folders.
Your next/prev buttons can't be that smart unless you have some conditional logic that helps them realize a particular imageNumber range belongs to a particular folder. If your images have the same file names (00#.jpg) across the different folders then that won't help. I believe you would need them to be sequential such that no folder repeats the filenames/numbers of another

TS 4.1 User Interface Forward/Back Buttons

I'd like to the add the Forward/Back Buttons to my User Interface similar to those in the Sequence Editor. I use a modified version of the Full Featured UI on the production floor and often switch to editor mode to work on the sequence. I find it very cumbersome not to be able to jump back and forth between Sequences while doing so.
Were the buttons created using the "Editing Class" proporties and methods to build a stack of recently selected sequences? Or are the buttons already existing with the methods simply needed to be called?
Any suggestions how to impment this functionality while in edit mode?
Thanks

"but keep in mind that the UI is not meant for developing. It instead was designed with operators debugging in mind."
I don't agree with that. The UIs are fine for developing if they meets your needs. If not, then you have to weigh using the sequence editor, which is not nearly as customizable, vs the cost of reimplementing whatever you can't do without that the sequence editor already has.
Note that most of the things that are missing from the UIs would take a fair amount of effort to re-implement (type editing, ...). If there were already simple-user-ready-drop-in-components for the missing features, we probably would have already included them in the UIs.
We want the UIs to be functional, but the top priority is that they be simple enough such that they can be readily modified.
Note that in some cases there are apis to support features that aren't in the UIs, but there isn't a complete control that wraps everything. For example, Engine.SearchFiles() is a huge amount of the implementation for find-and-replace, but there currently isn't a user callable dialog for invoking it or a user accessible control for automatically browsing the results, thus we don't currently include that feature in example code for the UIs. I don't know the specifics of forward/back, so I'm not sure how much of the implementation is exposed as public APIs, beyond the goto-location functionality (see Locations.GotoLocation, ...).
- James

DW5 back button (and go back function) OK in Firefox, go back too far in IE8.

Both the browser window back arrow button and the DW5 javascript "go back" function go back the correct ONE STEP in Firefox, but in Internet Explorer 8 either button jumps too far back, to a main page instead of to the departure point within some opened tab or opened accordion element on that page. Not stepping bcak through "history". Any ideas what is wrong in IE8?

Hi Greg,
before I go back to your "back"-function, I would like to draw your attention to DW's "jump function" (translated from my German DW). It appears to me a greater reliability in use than the other solutions. You can accurately send the people to the desired page.
and there e.g.:
And and among the simultaneous use of "your" your back-function, you certainly come to the goal.
I know these back-solutions and sometimes it is not all to bad toyou have these opportunities:
<a href="javascript:history.back()">one page back</a> or <br><br><a href="javascript:history.back();">
and links forward to do this way:
<a href="javascript:history.forward()">one page forward</a>
I'll look for your informations later.
Hans-G.

Disabling forward/back browser keys

I'm looking for a way to disable the forward/back browser keys located next to the directional keys on my 410.
These keys have been a bad design for years, but this is the first time I haven't been able to disable them (no thinkpad advantage keyboard tool on windows 7 apparently).
Anyone know a way without installing a 3rd party keyboard mapper?

joyotata, you can simply remap that keys for any other function you want. Look at KeyTweak utility, for example (google and find it, v.2.3 is the last), free of charge. With keytweak new function of the keys are global.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

After upgrading to 11.1.2 (31), 'Pause' skips forward a second

Hi, Apple Community!
I'm a journalist, so I spend a lot of my day transcribing. I record either on my iPhone, or with a Belkin dictaphone attachment for a beaten-up old iPod, and then import the file into iTunes. From there, I can manually transcribe the audio into text by listening to a phrase, hitting 'play/pause' on the keyboard, typing it out, then moving onto the next.
But since upgrading to Mavericks - and iTunes 11.1.2 (31), pausing causes the track to skip forward a little over a second. It might seem like a little thing, but this means I miss one or two words and have to rewind the audio every time. It makes what's already a pretty irritiating task another degree more irritating.
How can I fix this? Or can Apple fix this? It's doing my head in!
Thanks, Wondergeeks!
Tim

It's a bummer. As an interim fix, however, I've found that VLC plays and pauses perfectly well without skipping forward - and has the added bonus of being able to slow down playback speed.
T

Skip forward/back function

Similar Messages

Maybe you are looking for