Skipping a table from EXPDP full backup
Hi,
Is it possible to skip a table from FULL expdp backup,if yes what would be command for the same.My database is 10.2.0.4 Windows 64bit.
Regards
Vijay
Hello,
With Datapump, the parameters EXCLUDE and INCLUDE may help you to select finely the Objects (Table, Procedure, ...) you want to export or import.
Please, find enclosed a link about the way to use these useful parameters:
http://www.oraclefaq.net/2007/03/09/expdp-datapump-excludeinclude-parameters/
As previously posted, the parameter EXCLUDE should answer to your request.
EXCLUDE and INCLUDE can be used with a FULL export / import these parameters limit the selection of the Object. More over, these parameters are mutually exclusive.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Jul 1, 2010 8:49 AM
Similar Messages
-
How to restore one table from the previous backup in 9.2.0.8 version.
Hi,
How to restore one table from the previous backup in 9.2.0.8 version.
Thanks
-GangaHi,
What is the table you want to restore?
Using export/import is supported with Oracle Apps database (for full database exp/imp, and certain schemas like custom ones). For the Apps schema, I believe it is not supported due to object dependencies and integrity constraints.
Regards,
Hussein -
Only import constraint from the full backup dump using datapump !
Dear Firends ,
I am using Oracle 10g in my production server . I firstly export the full database backup using expdp . Now I want to import just the constraints of my production server to a test server . Is it possible to import constraints only to a test server from a full dump backup ?
plz inform ... ...Yet another 'I refuse to read the documentation, unless some volunteer spoon feeds me' question.
What happened to the DBA community. Is there some special virus spreading all over the globe?
Or is the virus called 'OTN' and is OTN making DBAs permanently lazy, trying constantly how to do a little as possible for their money.
You can easily construct the answer yourself from this overview.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#sthref389
And please re-read the Forums Etiquette post again, or read it for the first time, stating you need to peruse the documentation prior to asking a question.
Your assistance in diminishing the boot load of RTFM questions is appreciated.
Sybrand Bakker
Senior Oracle DBA -
Is it possible to restore database from a full backup without controlfile?
Hi,
I have done a full backup for the database oracle 11g using:
run{
allocate channel c1 type disk;
set limit channel c1 kbytes 102400;
sql 'alter system archive log current';
backup full tag 'dbfull' format 'd:\dbbackup\f_%d_%u_%s_%p_%t' database include current controlfile;
backup archivelog all delete input format 'd:\dbbackup\al__%d_%u_%s_%p_%t';
release channel c1;
but, I deleted all the datafiles include all control files.
Is it possible to restore the database?
Is there a way to restore the control file from the backup files?Thanks Werner!
I finally find the correct backuppiece for the controlfile.
D:\dbbackup
2010-03-19 18:41 <DIR> .
2010-03-19 18:41 <DIR> ..
2010-03-19 18:41 5,711,872 AL__ORCL_04L8VSN6_4_1_714076902
2010-03-19 18:41 104,857,600 F_ORCL_02L8VSJ0_2_10_714076768
2010-03-19 18:41 104,857,600 F_ORCL_02L8VSJ0_2_11_714076768
2010-03-19 18:41 104,857,600 F_ORCL_02L8VSJ0_2_12_714076768
2010-03-19 18:41 24,535,040 F_ORCL_02L8VSJ0_2_13_714076768
2010-03-19 18:39 104,857,600 F_ORCL_02L8VSJ0_2_1_714076768
2010-03-19 18:39 104,857,600 F_ORCL_02L8VSJ0_2_2_714076768
2010-03-19 18:40 104,857,600 F_ORCL_02L8VSJ0_2_3_714076768
2010-03-19 18:40 104,857,600 F_ORCL_02L8VSJ0_2_4_714076768
2010-03-19 18:40 104,857,600 F_ORCL_02L8VSJ0_2_5_714076768
2010-03-19 18:40 104,857,600 F_ORCL_02L8VSJ0_2_6_714076768
2010-03-19 18:40 104,857,600 F_ORCL_02L8VSJ0_2_7_714076768
2010-03-19 18:40 104,857,600 F_ORCL_02L8VSJ0_2_8_714076768
2010-03-19 18:40 104,857,600 F_ORCL_02L8VSJ0_2_9_714076768
2010-03-19 18:41 9,830,400 F_ORCL_03L8VSMP_3_1_714076889 ---->the controlfile backup piece.the file name contains '03' instead of '02'(datafile).
After run 'start nomount', I restore the controlfiles using 'restore controlfile from 'd:\dbbackup\F_ORCL_03L8VSMP_3_1_714076889';
The key point is to find the right backup file piece for the control file. -
RMAN restore from older full backup.
version. 10gR2
We take full backup every Wednesday (7/2, 7/9, 7/16 and 7/23). I need to restore the database from 7/2 backup. No recovery is needed. How do I do that. Thanks for the help.You can specify the BACKUPSET or TAG you want to restore from on the restore command.
RESTORE ... FROM BACKUPSET
RESTORE ... FROM TAG = '..'
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta051.htm#sthref796
Why do you need that specific backup? If you were restoring to a point in time before the 7/9 backup then RMAN will work out to use the 7/9 backup. If no recovery is needed I assume you're testing a restore using VALIDATE and/or PREVIEW? -
Possiblity to import any particular table from the full dmp file
Hi,
I am using Oracle 10G database.
I a have dmp file.
I need to import only a particular from that dmp file.
Is there any possiblity to import a particular table from the whole dump.
Thanks and Regards,
Ansaf.Ansaf wrote:
Hi,
I am using Oracle 10G database.
I a have dmp file.
I need to import only a particular from that dmp file.
Is there any possiblity to import a particular table from the whole dump.
Thanks and Regards,
Ansaf.
You can specify like below example
impdp hr TABLES=employees, xxx, xxxCheers -
Urgent -- need to restore table from full database backup
Hello,
Can somebody tell me the process for restoring just a table from a full database backup?
I did a full online database backup yesterday, and one of my tables got ruined today. I need to restore it as soon as possible, but I don't know how. When I tried flashback tables, it said that feature wasn't enabled. Should I restore the datafile or the tablespace?
Thanks much,
NoraIf you only want to recover the table and not the other objects in the tablespace, and assuming the table was damaged by a user statement (and not, say, block corruption), you would need to recover your backup to a different system, export the table that was damaged, and import the table into your real production database. If you can recover the entire tablespace to an earlier point in time, or if you can lose some committed changes to other database objects, you may have other options.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Problems with DUPLICATE DATABASE when datafile was added after full backup
Hi,
I'm facing a problem when performing database duplication with the RMAN duplicate database command on a 10g database. If I preform the duplication from a full backup that is missing a datafile which was added to the database after the full backup, I get the following error message:
Starting restore at 10-10-2009 18:00:38
released channel: t1
released channel: t2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 43The redo log which was CURRENTat the time of the datafile's 43 creation is also available in the backups. It seems like RMAN can't use the information from the archived redo logs to reconstruct the contents of datafile 43. I suppose that because the failure is reported already in the RESTORE and not in the RECOVER phase, so the archived redo logs aren't even accessed yet. I get the same message even if I make a separate backup of datafile 43 (so a backup that is not in the same backupset as the backup of all other datafiles).
From the script the duplicate command produces, I guess that RMAN reads the contents of the source database's controlfile and tries to get a backup which contains all the datafiles to restore them on the auxiliary database - if such a backup is not found, it fails.
Of course if I try to perform a restore/recover of the source database it works without problems:
RMAN> restore database;
Starting restore at 13.10.09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
.....The datafile 43 is recreated and then redo is applied over.
So, does anyone know if duplicate database can't use archived redo logs to recreate the contents of a datafile as a normal restore/recover does? If it's so, then it means it's necessary to perform a full database backup before every run of duplicate database if a datafile was added after such a backup.
Thanks in advance for any answers.
Regards,
JureHi Jure,
I have hit exactly the same problem during duplication.
Because we backup the archive logs every 6 hours with rman I added an extra run block to this script.
run
backup incremental level 0
format 'bk_%d_%s_%p_%t'
filesperset 4
database not backed up;
(I also than hit a bug in the catalog which was solved by patching up the catalog dbs from 11.1.0.6 to 11.1.0.7.)
This will narrow down the datafile not being part of any rman backup to 6 hours while skipping datafiles for which a backup already exists.
Regards,
Tycho -
Recover table with no export backup
How can I recover a table from the cold backup without resoring all the database?, the dabase running with noarchive mode
I want to retrieve a static data table from my 4 months old database cold backup. Related with I have some question:
1)Is there any other way to restore the table without restoring the whole database?
2)I know the datafile the table belongs to, is there any way to retrive that datafile alone and linking to the existing production database?
3)If I restore the cold backup to different location in the production machine that have already the same database is running, can I start the database(having the same name) with different instant name(Because I don't want to shutdown the running database in any way, and I don't have test machine to load the database for the export of table)?
Expecting your advice...
Thanks -
Recovering a table from backup
Hi,
I have a full back up of rman back up / normal back up.
I wanted to recover a particular table from the back up without disturbing the current activities on DB/User.
DB:11.2.0.1.0
OS Windows 2003 ServerTippu wrote:
Hi,
I have a full back up of rman back up / normal back up.
I wanted to recover a particular table from the back up without disturbing the current activities on DB/User.
DB:11.2.0.1.0
OS Windows 2003 ServerYou can:
1) Take/copy your rman backup to remote server
2) Restore/recover database there
3) Take the logical backup of table through EXPDP/EXP
4) Scp that .dmp file to Target
5) Import that .dmp file into target
But flashback is on? and did you tried to recover from recycle bin? Hope above steps help -
Missing tables in a full=y expdp
Hello !
There are missing tables in an expdp dump of a database we use in a test environnement.
I don't know why ...
The datafile seems not to be corrupted. The table is listed in a tool like TOAD, and is listed in the catalog view DBA_TABLES.
But the expdp logs doesn't list this table while listing other tables from the same user.
If i try to expdp only a table of these (a missing table in the dumpfile), i get a 39166 Object not found error.
The Oracle Database version is 10.2.0.4.0 and the command line we use is :
expdp "'SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<ip_address>)(PORT=<port>))(CONNECT_DATA=(SID=<oracle_sid>)))'" SCHEMAS=OWNER DIRECTORY=DIR_DP DUMPFILE=dumpfile.dmp FULL=y
What did i miss ?
On a structure-like database on a second test environnement the tables are expdp regularly ...
Thank's for your answers !
Steve.966918 wrote:
Hello !
There are missing tables in an expdp dump of a database we use in a test environnement.
I don't know why ...
The datafile seems not to be corrupted. The table is listed in a tool like TOAD, and is listed in the catalog view DBA_TABLES.
But the expdp logs doesn't list this table while listing other tables from the same user.
If i try to expdp only a table of these (a missing table in the dumpfile), i get a 39166 Object not found error.
which schema owns the "missing" object? -
Importing only tables from full export
hi,
our database is going to get live..
Oracle 10GR2
Windows 2003.
i have full expdp dump file...
i just want to import only tables from that dumpfile..
how can i do that..
there are around 1059 tables...
searched over the net but did not find anythiing..
your help is needed....
thank you ..
wating for yourthnks for the replay..
the schema is different in which the tables needs to be imported.
but this schema in which tables needs to b imported contains the same number of tables with same strutures.
thanks. -
Can not recover table from rman backup
For testing I want to recover deleted table from rman backup.
I have make vm of oracle 11g. the following step i have applied but could not recover the table.
rman> backup database ;
On sqlplus create login as scott/tiger
create table scott.emp1(col1 varchar2(10));
insert into emp1(col1) value('Yasir ') ;
commit ;
select * from emp1 ;
it shows me one row successfully.
Now i have login the sys as sysdba
sqlplus> alter system switch logfile ;
after this i have drop the table .
Now to recover the table i have restored database on same vm.
rman>restore database ;
rman> recover database ;
rman> alter database open ;
on sqlplus i have issued
sqlplus> select * from scott.emp1 ;
table or view does not exist.
any help how to recover the deleted table from rman backupHi,
Check this test case
SQL> create table TEST2 as select * from emp;
Table created.
SQL> select count(*) from TEST2;
COUNT(*)
15
SQL> select TO_CHAR(SYSDATE,'DD-MON-YYYY HH24:MI:SS') from dual;
TO_CHAR(SYSDATE,'DD-
10-SEP-2013 10:57:05
SQL> alter system switch logfile;
System altered.
SQL> drop table TEST2 purge;
Table dropped.
SQL> shu immediate
[oracle@vnode MYSHELL]$ rman target /
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 10 10:58:39 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DDTEST (DBID=1667776968, not open)
RMAN> run{
set until time "to_date('2013 Sep 10 10:57','yyyy mon dd hh24:mi')";
restore database;
recover database;
alter database open resetlogs;
}2> 3> 4> 5> 6>
media recovery complete, elapsed time: 00:00:02
Finished recover at 10-SEP-13
database opened
RMAN> exit
SQL> set lin 200 pages 100
SQL> select count(*) from test2;
COUNT(*)
15
HTH -
I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?
Did you follow the instructions on the page linked below?
OS X Yosemite: Recover your entire system -
Full backup system restore from time machine
Help: I need to rebuild my system from Time Machine.
I am using iMac with 10.6.8. I plan to replace my HDD.
When trying to emulate the system restoration, I used the MAC Install DVD, which allowed accessing the Time Machine external disk.
However, TM suggested only one full backup dated 3/2011......
Can't time machine use all incremental steps between 2011 and today? 3 years......
What should I do before changing my HDD? Any way to force TM to accept a full backup NOW?
And then, will Restore rebuild my system as I see it today?
Thanks,
MosheThe only one I've ever used is SuperDuper. It and Carbon Copy Cloner have free trail periods so you can experiment. I'm not familiar with the others.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Maybe you are looking for
-
Is there any way to force Safari to open a pdf file outside of the browser. Every time I click on a huge pdf file, it tries to open it in a new browser tab or window, and safari locks up. I want it in Reader or Professional, so that I can edit it if
-
Oracle 9i Lite and Satellite Forms on the Palm
I would like to use Oracle 9i Lite 5.0.1with Satellite Forms EE 4.1 on the Palm The docmentation from each company refers to the other company's documentation and no instructions seem to exist. I am begining to suspect that to abilty to use Satellite
-
Reverse billing document on an archived delivery
Do you know how this would be possible? I have a billing document that i would like to reverse but am unable too because the delivery has been archived.
-
What are the tables for Partner Fuction regarding the Vendors Purchasing ?
Hello Gurus, What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number. Thanx in advance, Ramona
-
I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But w