Skype 7.0 has a bug with webcams.

Skype 7.0 has a bug with webcams.
In previous versions there could only be 10 people actively in a call for webcams to work. I constantly have a call where there are 12+ people in the call (not talking, but using the IM features of the group, so not in voice chat). Normally webcams are a non-issue and we can always turn them on.
In the newest version of skype (7.0) you cannot turn on webcams if there are more than 10 people in the call (IM or Voice). Anyone with 7.0 can see the webcams just fine, but cannot enable it themselves. If they turn on video with 10 people in the IM then add more, the webcam will stay on but cannot be reenabled.
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

According to AT&T Technical Support, the "Wireless #" on the tablet box from AT&T is only an identifier for the 3g/4g signal, and cannot be used from by any (known) application as an actual phone number.
If anybody has found a way to use the AT&T "Wireless #:" with Skype or another app, I'd appreciate learning about how to do it.

Similar Messages

  • Your Skype Profile Account has been awarded with t...

    Today i have received a contact request named "Skype Admin" with the following message:
    Congratulations!!! Your Skype Profile Account has been awarded with the sum of  £250,000.00 Pounds. This is to inform you that you have won a prize money of Twe Hundred And Fifty Thousand Great Britain Pounds in the on going SKYPE SWEEP STAKES PROMO 2013 edition.
    For claims and more information's contact us via:
    Email:    <removed for privacy>
    Tel :  <removed for privacy>
    Once again Congratulations.
    Best Regards,
    Dr. Robert Walter
    Cash Department
    SKYPE.COM © 2013  Inc.
    I am wondering how easily they are making fool. Even they dont have the skype email address.

    i also get this in my e-mail 
    SKYPE FREE LOTTERY PROMOTION CLAIMS PROCESS MODE‏‏‏‏‏‏‏‏‏
    Actions
    skype teams (<removed for privacy>)
    Add to contacts
    4:17 PM
    To: Joseph Bowen
    SKYPE FREE LOTTERY PROMO
    <removed for privacy>
    Promo claims officer
    Email:  <removed for privacy>
    Phone: <removed for privacy>
    Dear Lucky Winner Congratulations!!!
    PRIZE CONFIRMATION (CLAIMS PROCEDURE) 
    Skype is a well known and respected company here in UK/. 
    We selected your profile name as one of our lucky winners in our Skype free lottery program. This has been organized to encourage future users in your region against our up-coming improved Skype services coming soon. Your profile name was selected randomly by our sweepstakes Head office in UK. This has been done to promote Skype around the globe, please note that your account name has generated a ticket code number: SK83YPE for your interest. This automatically won you the sum of GBP1,000,000.00 (One Million Great British Pounds Sterling)
    Below are your winning documents which will be presented to you.
    1. WINNING CERTIFICATE FROM THE LOTTERY PROMOTIONS
    2. WINNERS CERTIFIED CHECK OF GBP1,000,000.00 (One Million Great British Pounds Sterling / Cash as you may wish 
    3. CERTIFICATES OF ORIGIN OF FUNDS {C.O.F.} 
    Therefore, To facilitate the release of your Winnings, kindly reply via E-mail to this office with the following information below for verification and processing of your prize, so you can claim your Prize on time.
    1. Your Full Names:.............................................. 
    2. Contact Residential Address:.............................
    3. Sex (Male/Female):......................................... 
    4. Age:................................................................
    5. Occupation:..................................................... 
    6. Mobile Phone Number:...................................... 
    7. Amount won:...................................................
    Thank you for being part of this Skype Free Lottery award program and Congratulations once again from all members of staff of the Skype Team.
    TERMS AND CONDITIONS:
    1. Any falsification of your details will render you disqualified because you will be assumed to be impersonating.
    2. As soon as your details are verified by this office, your Prize will be Officially Approved immediately without delay.
    3. Friends or relatives cannot redeem your won prize on your behalf because the certified Check / Cash is covered by an Irrevocable Guarantee of Payment Bond (IGPB) 
    4. To avoid multiple claims, impersonation and disqualification, all winning information's should be kept strictly confidential. 
    Kindly reply back to this office through E-mail with your verification details as stated above for a quick processing of your Winnings immediately. 
    Congratulations Once again!!!
    Sincerely,
    Mr. Thomas Sultan (Claims Officer) 
    Skype Admin.

  • I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
    So, the options are to upgrade to a newer OS X or use Firefox or  Chrome.
    Be aware, Apple no longer support Snow Leopard v10.6 >  www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
    See if your Mac can run v10.9 Mavericks >  OS X Mavericks: System Requirements
    If so, you can download and install Mavericks for free from the App Store.
    Read prior to upgrading >   Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

  • Has anyone else noticed this bug with multitasking gestures on iOS 5?

    I recently updated my iPad 2 to iOS 5 and have just noticed this bug with multitasking gestures. 
    If you're currently in an app and use the four-finger swipe up to open the app switcher, and then subsequently close another app that's open in the background from the switcher, the app doesn't seem to fully close.  What I mean is that if you now use the four-finger swipe right/left to switch apps, when you get to the place where that app you closed was, it's still open, and after you view it, it pops back into the app switcher.  It seems like the multitasking gestures feature isn't recognizing that you've closed the app and that it should skip it from now on. 
    If you do the above steps again, but this time after you close the app from the switcher, use the five-finger pinch to go back to the home screen, it seems to clear the "cache" being used by the the gestures feature.  Now if you go back into any app and swipe left to right, the closed app won't load up anymore (which is how it should correctly work). 
    Has anyone else noticed this, or can anyone else reproduce the bug as I described?  I'd appreciate it if an Apple employee could confirm that this is a bug in iOS 5 and not just something wrong on my end.  Thanks in advance. 

    02-May-200702:03 PM
    scoobyman wrote:
    Hi keffa
    After the time spent and attention to detail in replicating this fault, I do think that you should email your findings to Nokia Care to be found on:
    http://www.nokia.co.uk/A4222231
    This is after all a discussion forum and others may find the same bug, but until it is logged at Nokia there is little chance of future modification if required!
    Done already. They may of course have corrected this in the 11.x firmware currently being rolled out but as I don't yet have access to it I can't say.
    Useful links: Phone firmware update | Nokia support site

  • Has anyone seen this BUG with Time Warp and Dissolve?

    I'm doing some real basic slow-mo clips, transitioning with various dissolve wipes. I've come across a problem that is extreemly frustrating! I'm wondering if anyone has insight on a fix or if Adobe does service packs or fixes that I might be able to install.
    If you put two clips adjacent to each other on a timeline, apply time warp, set percentage to say 30% of realtime, then apply a dissolve between the clips, clip B, the outclip will play in reverse for a period equal to about 1/3 of the duration of the clip.
    This is true scrubbing through the timeline and even rendering.
    VERY ANNOYING!
    I'm going to call support tomorrow, but that's not going to help me get my project finished any sooner since this is a critical element in this composition. I've tried the time remapping method, but the frame-blend is no match for the pixel motion of time warp.

    Steve,
    I think your post #11 was being sarcastic, but you left a little wiggle room for it not to be. With the sarcastic interpretation, I must add my thoughts:
    Here is the link to the Adobe bug report form
    . It is important that users who discover bugs with reproducible steps file them - otherwise they don't stand a chance of ever getting fixed. Steven Gotz's advice was sound in this regard.
    As to the discussion of workarounds - since this is a User-to-User forum, the best that we as a community can do is help each other out with workarounds, since none of us here have the power to actually fix anything.
    The important thing to glean from SG's post is the definite need to file a bug report.

  • [svn] 1941: Fix bug with writing out a MorphShape2 line style when it has a fill

    Revision: 1941
    Author: [email protected]
    Date: 2008-06-04 12:13:17 -0700 (Wed, 04 Jun 2008)
    Log Message:
    Fix bug with writing out a MorphShape2 line style when it has a fill
    connected to it. Had been calling encodeMorphFillstyles() directly
    with an array of one element, but that adds a count byte (of value 1)
    which should not be there. So I decomposed new method
    encodeMorphFillstyle() out of encodeMorphFillstyles(). So not a big
    change, but lots of indentation changes.
    Other than that all changes were replacing the use of constant numbers
    with static constants from FillStyle and also adding an equals()
    implementation for FocalGradient.
    reviewed by Pete Farland, passed flex checkin tests
    Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/types/FocalGradient.java

    Hello,
    We also have this problem ...
    We are concluded, (??) When there is a note on the first or second line that starts in the block, justification and rebuilt and the problem happens! even made to change color of text on the blank page occurs ... our solution to an extra line at the beginning of the block without note or make it past the note on the previous page ...
    when in a true solution?
    Translation from French
    Bonjour,
    Nous avons aussi ce problème …
    Nous somme arrivé à la conclusion, (???) quand il y a une note sur la première ou la deuxième ligne qui commence dans le bloc, justification et refaite et le problème arrive !!! même le faite de changé de couleur sur du texte les page blanche survient … notre solution mettre une ligne supplémentaire en début du bloc sans note ou faire passé le note sur la page précédente …
    à quand une vrai solution?
    Philippe

  • Skype says i have a problem with my microphone

    Hi,
    So i bought my first laptop computer and it came with windows 8. At first i said oh w8 looks really neat but after less than a minute i was already hating it. The fact that i cant turn off all this redesigned UI's is really annoying. So i tried to use skype, when i call or receive a call and i answer it, the call gets terminated immediately and skype that " there has been a problem with my microphone ". That is, my mic that is built in the pc.
    If i use mumble teamspeak or even audacity, i can record and use the mic without problems, so its not a hardware problem, its just this crappy software. In my audio settings i have " Microphone (Realtek HD Audio)" selected.
    As if this vomiting minimalistic design wasnt enough, i have to deal with configuration problems that programs that are 5 mb (audacity ) dont have.
    Terrific job.

    Owkey i had the same problem with my computer but i will explain now to you step for step how to solve this and its pretty easy.
    NOTE: this is for the winsdows 8 version not desktop. Yust saying.
    Step 1: Launch Skype in the winsdows 8.
    Step 2: press the flag buttom on you keyboard with the C combined.
    Step 3: Click on settings.
    Step 4: Click on permissions.
    You will see a smal bar that will allouw you to activate is de-activate anny hardware tools from skype.
    Step 5: Make sure webcame and microphone on ON.
    Step 6: Call friends and have a good time 
    Hope you can use this to enjoy your Skype experience.
    Yours sincerely, 
    Chris Nubcake

  • 'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set

    Using 4 internal drives, I have specified the following setup for each:
    2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
    The 4 speed partitions stripe to a single RAID volume correctly.
    The 4 data partitions are used to make a RAID 10 volume as follows:
    The first 2 data partitions are mirrored to make a 'data-A'
    The next 2 data partitions are mirrored to make a 'data-B'
    These complete correctly.
    Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
    "Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
    A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
    Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?

    To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
    Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction.

  • HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

    After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

    Hi 1283ar.
    Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
    However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
    If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

  • Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...

    Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...  When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything...  Very buggy. 

    It appears to me that network file access is buggy in Maverick.
    In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
    It makes impossible navigate a directory tree.
    File access has been trashed in Maverick.
    They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

  • ICal bug with month view

    I primarily use week view on iCal, but sometimes i switch to month view for a larger perspective. Often, i use month view to check for any leftover events from the previous month in case i forgot to delete one or two.
    I just found a bug concerning this. If i click on "month" today, it'll take me to the month view for june 2011, and from there i can navigate forwards or backwards. However, may 2011 seems to have a bug. If i click on < from june, it does nothing; if i click again, it takes me to april 2011. Similarly, if i click on > from april it does nothing and if i click again it takes me to june.
    It doesn't end there. The june/may thing happens only when the selected day (the one shaded light grey on the month and week views and bright blue on the little month tab on the left) is after 04 june. If a day from the first week of june (i have my weeks start on sunday) is selected, the < button does take me to may, but several events which i deleted a long time ago are showing up.
    Now, i have an event set for today (04 june). Since the first four days of june are in the same week as the last three of may, the month view for may shows these four days, as any normal calendar app would.
    If i use the month tab to the left to navigate, i can access may 2011 by selecting any day on that month. However, iCal's behaviour depends on which day was selected previously. If the previous day was in april 2011 or earlier, iCal will show the month of may completely empty, which is great because i have no leftover appointments from may; however, the box for 04 june is also empty, which it shouldn't be. If the previous day was in june 2011, it'll show may with a repeating event on every sunday except the first, which is completely absurd, since i have deleted this event (and why isn't it showing on the first sunday in may?); the box for 04 june, however, will correctly show the event i have set for this day. If the previous day was in july 2011 or later, it'll show may with the repeating event on all sundays (including the first one) and it won't show anything on the box for 04 june.
    Obviously, there is a bug with may 2011.
    In case it helps, i do have a repeating event set to all sundays until the end of existence, but i have deleted all the entries from may and previously, since they have obviously already happened. Also, i had many other repeating events set to happen on different weekdays; these are to repeat themselves weekly until about halfway through june, and they started on april or may (can't remember right now). Like the sunday one, i have deleted all the entries from may because they have already taken place. Strangely (and thankfully), none of these appear when i visit may from june or later, as does the sunday event.
    Any help would be greatly appreciated. Or am i forever stuck with week view, which has so far proven to be bug-free?
    (I did a search on Google and another on the Apple forums for this issue but could find nothing, so i decided to ask the question myself. I apologise if somebody has already asked this question and i just couldn't find it.)

    Greetings,
    I have a vague recollection of someone else with this issue but haven't experienced it myself nor encountered it recently.
    Troubleshooting:
    1.) First make an iCal backup: http://support.apple.com/kb/HT2966.
    2.) Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical and / or "ical"
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    __NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps!

  • ICal client with iCal server. Bug with delegation of calendars with plenty

    Hi,
    I have a working setup with an iCal server on OSX 10.5.2 that is also an OD master. I have several users with calendars hosted on the server. Only Mac clients so far. Everything seems to work when managing your own calendars. The problem I see is when I delegate my calendar to another user. None or just a few of the entries show up in the other users view of my calendar.
    I experimented a little and found out that it probably has to do with the number of items in the calendar. I have a calendar that contains several years of historic entries and when I start to delete entries everything eventually start to work. My calendar shows up OK in the other users view.
    I am not completely sure if it is the number of items in the calendar or if it is some specific entry that cause the problem but I can recreate the problem over and over again if I import the exported calendar, delegate and refresh as the other user.
    If I start to edit away entries in the exported iCal file I finally get a working setup.
    If somebody at Apple is interested I can provide the exported iCal file and it should be quite easy to recreate the bug.

    Hi,
    I have a working setup with an iCal server on OSX 10.5.2 that is also an OD master. I have several users with calendars hosted on the server. Only Mac clients so far. Everything seems to work when managing your own calendars. The problem I see is when I delegate my calendar to another user. None or just a few of the entries show up in the other users view of my calendar.
    I experimented a little and found out that it probably has to do with the number of items in the calendar. I have a calendar that contains several years of historic entries and when I start to delete entries everything eventually start to work. My calendar shows up OK in the other users view.
    I am not completely sure if it is the number of items in the calendar or if it is some specific entry that cause the problem but I can recreate the problem over and over again if I import the exported calendar, delegate and refresh as the other user.
    If I start to edit away entries in the exported iCal file I finally get a working setup.
    If somebody at Apple is interested I can provide the exported iCal file and it should be quite easy to recreate the bug.

  • Is this a bug with BoEdge3.1?

    Can anyone help me on the issue which my customer is facing for BoEdge3.1
    Concerning  Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
    This is the error message she was receiving when trying to change an
    existing user from Concurrent to Named under the Connection Type on the
    Properties panel.
    The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
    She have been going through this process of deleting existing users, and then
    re-adding them as Named and it was working okay. Then, it stopped
    working and she started getting the same FWB 00013 error message again.
    She was not able to create any Named users now. Basically, the workaround
    worked for a while - then stopped working.
    She currently has a total of 88 users. 21 of them are named. 67 of them
    are Concurrent. She is licensed for 55 Named.
    Once again, the system thinks she has 55 users marked as Named. But
    there are only 21 marked as Named.
    She did notice that as she was going through all of her existing list of
    users, in alphabetical order, she was opening the Properties tab and
    checking the Named/Concurrent status - as she got to the 55th user in the
    list that is when she started getting the error message again.
    Is this a bug with BoEdge3.1?
    And I got an ADAPT01194692.
    I am not sure that Is the ADAPT related to this issue.
    Please help me its very critical.

    Hi Salena,
    If you are an SAP Employee, request you to post this question at
    https://cw.sdn.sap.com/community/bobjtc
    Cheers,
    Subhodeep

  • TS1702 I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to rein

    I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Possible bug with Triggers tab

    Hi there,
    I'm using 1.0.0.12.15 and think there is a bug with the triggers tab. When I navigate to my table (which has one trigger on it), and then click on the Triggers tab, the trigger shows up multiple times. It's probably not a coincidence that it shows up the same number of times that there are columns :)
    Looks like a missing join condition somewhere.
    Hope this helps

    Tracked this one down too...
    SQL Developer is getting the triggers like this:
    Select dt.trigger_NAME, dt.trigger_type, dt.triggering_Event, dt.status, do.object_id , do.owner sdev_link_owner, dt.trigger_NAME sdev_link_name,'TRIGGER' sdev_link_type
    from all_triggers dt, all_objects do
    where do.owner = :OBJECT_OWNER
    and dt.owner = :OBJECT_OWNER
    and dt.trigger_name = do.object_name
    and dt.table_name = :OBJECT_NAME
    However, we got other objects (mainly tables) with the same name as the trigger. Not specifying the object type will identify them the same way as the trigger, resulting them all to be included in the select!
    Adding "and do.object_type = 'TRIGGER'" will solve the problem.
    K.

Maybe you are looking for