Skype business, connection quality and client comp...
Greetings.
Our company operates a citrix environment on 2008 64bit servers.
My manager has recently paid for Skype business but just want to understand a few aspects of it before going any further.
Does the skype business allow you to install unlimited clients in your organisation but you need to have a skype business account for each person logging in?
Also is there a difference with the quality of the connection, comparing free skype to business skype?
ALso I suppose it would be good to know if the free skype and business skype are supported in the environment described above.
bstumpo wrote:
Greetings.
Our company operates a citrix environment on 2008 64bit servers.
My manager has recently paid for Skype business but just want to understand a few aspects of it before going any further.
Does the skype business allow you to install unlimited clients in your organisation but you need to have a skype business account for each person logging in?
There are no restrictions in the number of Skype clients you can use for normal or business releases. You can install Skype on systems that have no current Skype name assigned as well.
Also is there a difference with the quality of the connection, comparing free skype to business skype?
The basic differences are more control but they use the same methods when using the same version levels as far as services go.
ALso I suppose it would be good to know if the free skype and business skype are supported in the environment described above.
Here is an example of using the Skype clients. Please note again, that there is no cost for using any Skype client program normal or business versions to use free Skype services.
http://community.skype.com/t5/Windows/Unattended-install/m-p/184740#M18609
About Me You can also use a IP Camera as your camera for Skype video Example Instructions
Similar Messages
-
Connection between server and client using thread
hi
i am new to java..i hav done a program to connect a server and client...but i hav not used threads in it..
so please tel me how to use threads and connect server and client..i tried it out not getin...i am havin thread exception...my program is as shown below
SERVER PRG:
import java.io.*;
import java.net.*;
public class Server{
String clientsen;
String serversen;
public void go(){
try{
ServerSocket serverSock=new ServerSocket(6789);
while(true) {
Socket sock=serverSock.accept();
BufferedReader inFromClient=new BufferedReader(new InputStreamReader(sock.getInputStream()));
BufferedReader inFromuser=new BufferedReader(new InputStreamReader(System.in));
DataOutputStream outToClient=new DataOutputStream(sock.getOutputStream());
clientsen=inFromClient.readLine();
System.out.println("From Client: "+clientsen);
System.out.println("Reply mess to Client");
serversen=inFromuser.readLine();
outToClient.writeBytes(serversen+'\n');
} catch(IOException ex) {
ex.printStackTrace();
public static void main(String[] args) {
Server s = new Server();
s.go();
CLIENT PRG
import java.lang.*;
import java.util.*;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.net.*;
import java.lang.Thread;
import java.applet.Applet;
class Client1
public static void main(String argv[]) throws Exception
String Sen;
String modsen;
BufferedReader inFromUser=new BufferedReader(new InputStreamReader(System.in));
Socket clientSocket=new Socket("192.168.1.2",6789);
DataOutputStream outToServer=new DataOutputStream(clientSocket.getOutputStream());
BufferedReader inFromServer=new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
System.out.println("Enter the mess to be sent to server");
Sen=inFromUser.readLine();
outToServer.writeBytes(Sen + '\n');
modsen=inFromServer.readLine();
System.out.println("FROM SERVER: " +modsen);
clientSocket.close();
please send me the solution code for my problem...sorry for inconvenience...
SERVER PROGRAM
*import java.io.*;*
*import java.net.*;*
*public class MyRunnable implements Runnable*
*public void run() {*
*go();*
*public void go(){*
*try {*
*String serversen;*
*ServerSocket welcomeSocket=new ServerSocket(6789);*
*while(true)*
*Socket connectionSocket=welcomeSocket.accept();*
*//BufferedReader inFromClient=new BufferedReader(new //InputStreamReader(connectionSocket.getInputStream()));*
*System.out.println("enter the mess to be sent to client");*
*BufferedReader inFromuser=new BufferedReader(new InputStreamReader(System.in));*
*DataOutputStream outToClient=new DataOutputStream(connectionSocket.getOutputStream());*
*//clientsen=inFromClient.readLine();*
*//System.out.println("From Client: "+clientsen);*
*//System.out.println("Reply mess to Client");*
*serversen=inFromuser.readLine();*
*outToClient.writeBytes(serversen+'\n');*
*} catch(IOException ex) {*
* ex.printStackTrace();*
*class Server1{*
*public static void main(String argv[]) throws Exception*
*Runnable threadJob=new MyRunnable();*
*Thread myThread=new Thread(threadJob);*
*myThread.start();*
*}*CLIENT PROGRAM
import java.io.*;
import java.net.*;
class Client2
public static void main(String argv[]) throws Exception
//String Sen;
String modsen;
//BufferedReader inFromUser=new BufferedReader(new InputStreamReader(System.in));
Socket clientSocket=new Socket("192.168.1.2",6789);
//DataOutputStream outToServer=new DataOutputStream(clientSocket.getOutputStream());
BufferedReader inFromServer=new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
//System.out.println("Enter the mess to be sent to server");
//Sen=inFromUser.readLine();
// outToServer.writeBytes(Sen + '\n');
modsen=inFromServer.readLine();
System.out.println("FROM SERVER: " +modsen);
clientSocket.close();
this is the code which i hav used using thread but i am gwetin error..ts is the error
Exception in thread "main" java.lang.NoSuchMethodError : Main -
MOH and Media Bypass no longer working after Skype Business updates
Not using the Skype Business skin but still using the Lync Enterprise 2013 skin
1 - MOH still works ok with call park but not for basic Lync to Lync calls or Lync to PSTN calls. Basically I noticed that CsClientPolicy EnableClientMusicOnHold was now set to false instead of true and so I set it back to True and set the music file path
as per below. Now when I place a call on hold I hear the new soft swoosh sound for going on hold but I don't not hear any music. Under Options>Ringtones and Sounds I have the following file selected: C:\Program Files\Microsoft Lync Server 2013\Application
Host\Applications\Conferencing Attendant\Media\Music\DefaultHold.wma which seems to work fine for call park but not basic call HOLD. Note: the Hold/Resume functionality/sip signalling works ok - any ideas?
2 - My current setup is with a Mitel MiVB PBX connected via a sip trunk (does not support TLS/SRTP and so it is disabled and using TCP/RTP) to Lync Enterprise 2013 with redundant mediation servers Ms-1 and Ms-2. I have Network Configuration > Global
> Enable media bypass and Always bypass selected and enabled, as well, under Voice Routing > Trunk Configuration > [Encryption support level = Not Supported / Refer = 3rd party / Enable media bypass = enabled / Centralized media processing =
enabled] ... after the update the media is not bypassing mediation servers anymore ... any ideas as to why?MOH issue: Thx but i have tried many times without success, I even added and pointed to a new file magicHold.wma (BTW DefaultHold is a .wma file and not .wav) which I have set for both Call Park hold and basic call hold (i can see the file is selected
under the lync client options > Ringtones and Sounds > Play MOH + <.wma file path>. The magicHold.wma file is played ok during call park but for basic call there is still still NO MOH regardless of which file I select for basic call MOH
- I have restarted my VM-Front End server box without any chnage - is there anything else that could possibly be affecting this? Also when I capture the RTP on the mediation server I don't see any MOH RTP being sent from Lync to PSTN when on hold. Please advise
if anyone has any other insight.
Set-CSClientPolicy –Identity Global –EnableClientMusicOnHold $true –MusicOnHoldAudioFile “\\lyncservername\LyncMOH\DefaultHold.wav” -
Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.
-
How to run SAP BUSINESS ONE 8.8 clients on windows and use MaxDB on linux/W
Good day,
As the subject shows we have SAP BUSINESS ONE 8.8 and I want to find out how to use it in combination with MaxDB instead of MS SQL. I find a lot of MaxDB stuff on the net but no guides on how to setup SAP BUSINESS ONE 8.8 clients on windows workstations and connect them to MaxDB.
Is this possible and if so how do I go about doing it ?
Any assistance is greatly appreciated .Hi,
I suggest you to check the supported server for B1 in this link:
http://service.sap.com/smb/sbo/platforms
You will know the sap b1 supported platform.
If you really want to use maxDB on linux/W as B1 server, you can send a development request to SAP AG.
JimM -
Please compare
methods in C # to connect to SQL Server
database (for example,
3-tier architecture of traditional and
entity Framework(linq to entity or linq to sql object model)
and Linq to SQL) in terms of speed, quality and functionality
to give me tips.
Thank you.
Mojtaba Malakouti.That means we need to compare and post the results here?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Anyone know if there are any plans, dates, ... on a Skype Business client for MAC?
Hi ErikHMac,
Currently, only the Windows version has been released.
I am afraid I am not able to answer your question now, but the next version of Office for Mac will be released this year, the Skype for Business for Mac client should be included in it.
From
http://blogs.office.com/2014/10/31/new-outlook-mac-available-office-365-customers/
“In the first half of 2015 we will release a public beta for the next version of Office for Mac, and in the second half of 2015 we will make the final release available.”
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Skype drops connection and cannot reconnect after network change
Whenever I switch between wifi and cable or if I enable my VPN, the skype connection drops and does not reconnect. The problem is not the VPN though because when on VPN I can Quit Skype, and reopen it and then it will connect. The same applies when switching between wifi and cable. Having to quit and restart skype everytime I switch really sucks, its supposed to be more "rugged" i would think.
Besed wrote:
techfreak, many words, but nothing to say about the issue and solution. With all respect.
Guys tell you that when they quit Skype and start it again, it connects well! It means nothing to do with local IT configuration. The problem started few months ago. There is a proxy configuration for VPN defined in Skype settings and it always worked fine, switching connection accordingly to the network. Now it loses connection when we switch between VPN and regular network and vice versa. The Skype restart is required each time to restore connection and it is REALY annoying.
If you claimed it worked differently before what changed on your end? Does it behave differently in an older version of Skype (harder to test since they're discontinuing older versions)? Most people who connect to a VPN use a VPN client to do so like the Windows PPTP VPN, Cisco VPN client, etc.. People use varying VPN servers and VPN client versions and they can behave differently. If users have a Proxy server they define that in the Proxy configuration. I've personally never attempted authenticating to a VPN server using the Skype's proxy configuration in connection settings. Split-tunneling is one setting that affects how traffic is handled and can produce a different result. I wish I could tell you there is one solution to your problem. If you determine the process differed in a earlier release, it would be helpful to post the last release it behaved in the fashion you are accustomed to. A contact of mine uses a VPN connection and toggles it on and off especially when we have bandwidth related issue. That does disrupt his Skype connection momentarily but he hasn't had to ever completely exit Skype. However he relies on the VPN client and does not place that authentication information in the proxy configuration. -
Skype drops connection and cannot reconnect after ...
Whenever I switch between wifi and cable or if I enable my VPN, the skype connection drops and does not reconnect. The problem is not the VPN though because when on VPN I can Quit Skype, and reopen it and then it will connect. The same applies when switching between wifi and cable.
Having to quit and restart skype everytime I switch really sucks, its supposed to be more "rugged" i would think.Besed wrote:
techfreak, many words, but nothing to say about the issue and solution. With all respect.
Guys tell you that when they quit Skype and start it again, it connects well! It means nothing to do with local IT configuration. The problem started few months ago. There is a proxy configuration for VPN defined in Skype settings and it always worked fine, switching connection accordingly to the network. Now it loses connection when we switch between VPN and regular network and vice versa. The Skype restart is required each time to restore connection and it is REALY annoying.
If you claimed it worked differently before what changed on your end? Does it behave differently in an older version of Skype (harder to test since they're discontinuing older versions)? Most people who connect to a VPN use a VPN client to do so like the Windows PPTP VPN, Cisco VPN client, etc.. People use varying VPN servers and VPN client versions and they can behave differently. If users have a Proxy server they define that in the Proxy configuration. I've personally never attempted authenticating to a VPN server using the Skype's proxy configuration in connection settings. Split-tunneling is one setting that affects how traffic is handled and can produce a different result. I wish I could tell you there is one solution to your problem. If you determine the process differed in a earlier release, it would be helpful to post the last release it behaved in the fashion you are accustomed to.
A contact of mine uses a VPN connection and toggles it on and off especially when we have bandwidth related issue. That does disrupt his Skype connection momentarily but he hasn't had to ever completely exit Skype. However he relies on the VPN client and does not place that authentication information in the proxy configuration. -
Connection between SDM client and server is broken
Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best RegardsHaving same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM -
Connection Problem while client is behind proxy and server out side proxy
hello
i implemented ChatApplication in JAVA, for that i used socket connection when client and server both are in same network then it's working fine.
but when my server is on internate and client is behind proxy and try to connect with server
it not able to connect i get exception.
i serch most of forum i got same answer and i try it but i was not success.
any kind of help is appriciated.
i attached my code(which i implement for testing ) pls reply me
thanks in advance.
Server.java
import java.lang.*;
import java.io.*;
import java.net.*;
class Server {
public static void main(String args[]) {
String data = "you are successfully connected with server.";
try {
ServerSocket srvs = new ServerSocket(1234);
Socket skt = srvs.accept();
System.out.print("Server has connected!\n");
PrintWriter out = new PrintWriter(skt.getOutputStream(), true);
System.out.print("Sending string: '" + data + "\n");
out.print(data);
out.close();
skt.close();
srvs.close();
catch(Exception e) {
System.out.print("Whoops! It didn't work!\n");
ProxyClient.java
import java.io.*;
import java.net.*;
import java.util.*;
class ProxyClient{
public static void main(String args[]) {
String host="61.17.212.29";
int port=1234;
String line;
Properties properties = System.getProperties();
/*properties.put("firewallSet", "true");
properties.put("firewallHost", "192.168.0.1");
properties.put("firewallPort", "808");*/
properties.put("socksProxySet","true");
properties.put("socksProxyHost", "192.168.0.1");
properties.put("socksProxyPort", "1080");
System.setProperties (properties);
try {
/*SocketAddress addr = new InetSocketAddress("192.168.0.1", 1080);
Proxy proxy = new Proxy(Proxy.Type.SOCKS, addr);
Socket skt = new Socket(proxy);
InetSocketAddress dest = new InetSocketAddress("61.17.212.29",1234);
skt.connect(dest);*/
System.out.println("before socket taken");
Socket skt = new Socket(host,port);
System.out.println("after socket taken");
BufferedReader networkBin = new BufferedReader(new InputStreamReader(skt.getInputStream()));
System.out.println("Received string: '");
line = networkBin.readLine(); // Read one line
while(true)
System.out.println(line); // Output the line
line = networkBin.readLine(); // Read the next line, if any
catch(Exception e) {
System.out.print("Whoops! It didn't work!\n");
e.printStackTrace();
}Now look here. I could not care less about this
code. I don't know anything about it, I don't
want to know, I have already recommended you don't
use it, and I have also given you a simpler and
better solution. If you don't want to take my advice
that is your privilege and your problem.ya i has understand system propertis i have setted and u can see it in the code i have tried by both system properties and also J2SE 5.0 proxy class but i got a same problem malformed Exception server refuse to connection.
is there any problem at sever side?
can u tell me in which way u r teling to set the propery i m looking forward for ur reply.
ya i m sure u will give me.................reply "ejp".
Thnx in advance. -
Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.
Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.
-
how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????
To sync photos from a Mac or Windows PC to your device using photo applications
Make sure you have the latest version of iTunes installed.
In iTunes, select your device's icon in the Devices list on the left.
Click the Photos tab.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
Click Apply.
To sync photos from a folder on your hard disk to your device
Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
In iTunes, select the device icon in the Devices list on the left.
Choose "Sync photos from."
Select Choose Folder from the pop-up menu and choose your main image folder.
Click Apply. -
Hi
I checked many treads and still I couldn't get a satisfactory explanation to the difference between Business System and Client. I read in help.sap site that multiple business systems can be assigned to a single technical system and also each numbered client of an SAP system is a Unique Business System ? So are client and business system one ? If so why use it interchangably ? And if many business systems can be assigned to the technical system how do we specify a related Integration Server ? As I understand only one Business System can be assigned Integration server. So if we assign many business systems to one technical system then how can we have related Integration server for all ? I couldn't get a satisfactory explanation to this doubt in any thread in this forum
Midhun>>each numbered client of an SAP system is a Unique Business System ?
It could be. But it is not necessary that each client of SAP system is communicating with PI. If it is then there will be one Business System for each client.
>> So are client and business system one ?
No. Client is more substantial category in SAP system. Business system just defines the logical name to these clients if they communicate with PI.
>> If so why use it interchangably ?
Actually they can't be used interchangably always. The only relation is that for each client of SAP system, there could be only one Business system.
>>And if many business systems can be assigned to the technical system how do we specify a related Integration Server ?
For related Integration Server name, you need to select the PI Business system name which would communicate with your business system. For a single SLD scenario you will see PI Dev, Q and Prod business systems.
>> As I understand only one Business System can be assigned Integration server.
Correct. Its a PI Business system.
>> So if we assign many business systems to one technical system then how can we have related Integration server for all ?
For all Business systems of 1 technical system, you need to select the same PI Business system name.
Regards,
Prateek -
Error to connect oracle 10g client and designer BO 4.0
hello,
I try to connect oracle 10g client and designer BO 4.0.
I created an ODBC connection to function in the administration tools of data sources but I can not connect once in designer.
I tried using the driver directly oracle designer 10 but I have the same error that is this:
DBD: ORA-12154: TNS: connection identifier specified could not be resolved
someone there had the same concerns?
cordiallyHi,
so it looks like that your TNSNAMES.ORA file isn`t properly configured. Thats why you can connect with the IDT to your Oracle Database.
Your DBA`s should sent you the correct TNSNAMES.ORA file or the entry for your DB prior. After the tnsping works, you will be able to use the IDT properly.
Regards
-Seb.
Maybe you are looking for
-
Convert tab delimited file content into an xml
Hi, I am completely new to java and i am trying to create a tree of an output i have. generally the output is tab delimited and i have a sample output in the following link http://jena.sourceforge.net/ontology/examples/class-hierarchy/output.txt I wa
-
See caller's name in an incoming call - Nokia 1600
Hi there, I have just bought a Nokia 1600. I have noticed that the incoming calls show only the number of the caller. I have the caller number and name in the phonebook. Is there anything I must configure in order to see the caller's name? I sure hop
-
What does "LSX-00204: extra data at end of complex element" mean?
When trying to validate an XML instance against a schema definition, we consistenly get: ORA-31154: invalid XML document ORA-19202: Error occurred in XML processing LSX-00204: extra data at end of complex element. Can somebody explain to me, when one
-
SvcHost spikes to 60% with both McAfee Agent/SCCM 2007 Agent on Server 2008
Recently we have identified a thread spiking to 60% and causing the server is lock up. We tracked it down to either the SCCM Agent or the McAfee Agent being the reason. If we have McAfee on the server, everything runs fine. if we have just the SCC
-
i want to be able to put my photos on without having to use icloud....when i usually plug in my phone to the imac it would automatically bring up itunes, then iphoto and continue to automatically ask to import my photographs, but today i plug it in a