Skype mic issues even after crating dummy ALSA

hello everyone i'm having a "growling" issue with my head set even after setting up a dummy alsa as mention in this wike page: Monster/low-octave "growling" distortion over mic after trying the stuff on that wiki I had a look here in the forums and found this post Skype + microphone = growling[SOLVED] but I'm still getting the feedback on the other side of the call also if I use the dummy alsa skype crashes below is the output of amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 56 [89%] [-7.50dB] [on]
Front Right: Playback 56 [89%] [-7.50dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 28 [90%] [7.50dB] [on]
Front Right: Playback 28 [90%] [7.50dB] [on]
Simple mixer control 'Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 10 [67%] [-15.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 11 [73%] [16.50dB] [on]
Front Right: Capture 11 [73%] [16.50dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 116 [97%] [28.00dB]
Front Right: Capture 116 [97%] [28.00dB]
Simple mixer control 'Docking-Station',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 3 [100%] [30.00dB]
Front Right: 3 [100%] [30.00dB]
i know is not the headset because I test it on my suse box and it work fain
hope someone can help me thank you in advances :-)
Last edited by gozes (2012-01-22 02:45:02)

Similar Messages

Issues even after updating to build 14.3.A.0.757

List of problems that I am still facing with my Z1 Compact..
1. Walkman widget does not work in lockscreen 8 out of 10 times at least, if not more.
2. Notification sounds still cracks, though the ringer issue appears to be solved.
3. The back key never functions while "IN A CALL". Also, if I try to type something while "IN A CALL" the keyboard never appears no matter how many times I tap on the typing panel.
If this is the standard of your development, then, unfortunately, competing with the likes of IPHONE 5S shall always be a dream.
And as a consumer, spending 35K over a phone shall compel a user to atleast expect the basic functionalities to work properly.
But may be. SONY INDIA does not care about it's customers!! At least both the KITKAT 4.4.2 builds make me feel this.
I have always been a SONY ERICSSON/SONY user since 2004 but this phone is causing me **bleep** lot of troubles.
Guys, my post is sincerely directed towards SONY developers/testers/othersonyexecutives.
I am definitely looking forward to a reply from SONY regarding these above mentioned issues which still persist even after the second update.
P.S. Please do not ask me to repair using PCC or SUS. They didn't work. I cannot do them again and again!!

I have a black Xperia Z1 Compact with a build date of 14W04 (week 4 of 2014) which I have just updated for the first time since purchasing SIM-free from Phones4U, using Sony PC Companion on my Windows 7 PC, to Android 4.4.2 and Sony Software 14.3.A.0.757 and fortunately (and very untypically) I do not seem to have experienced any of the reported problems at all. I have just taken several flash photos in the pitch dark indoors using Superior Auto mode and I cannot identify any flash bleed or uneven flash illumination as reported in other topics and threads. I am really very surprised, because from my past experience with technology in general, if there is a possible potential technical problem around, I always seem to be one of the unlucky people who it affects! However, I do agree that the overall photo quality does not seem to be nearly as good as would be expected from the apparently impressive documented camera specification and is really quite dissapointing! I wondered if a third-party Android camera app would improve photographic performance, or if the obvious shortcomings are too deeply associated with the camera lens and/or the Sony firmware?

Skype mic issues with Beats soud card

Hi All, I am having problems to make use of my internal mic especially to use Skype, I have already changed my first DV6 laptop due to the same issue! can anyone help please? and to HP could you make better laptops, I will throw this kit out if this issue is not sorted with an update ASAP!

I have a similar issue where if any recording takes place, or the microphone is even accessed by a program, I lose all audio until I restart my computer. What's similar is that after this occurs, the microphone and line-in inputs both get muted automatically. Previously, audio in certain games didn't work for me as a result of this, but with a bit of playing around sometimes I can get it working. However, eventually (usually after around half an hour), the sound will just cut out in-game entirely and require me to restart once again (only happens in games that use a microphone in some way; Fallout 3 is unaffected but Call of Duty: World at War is, for example. I think it might be either a really rare driver issue or a hardware problem, at this rate.Message Edited by sear on 2-6-2008 04:0 PM

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

MacBook Pro Retina showing spinning ball issues even after Main Logic Board Replacement

HI there!
I'm a proud owner of Macbook Pro, 15 inch, late 2013 model. It has 2.6 GHz Intel Core i7 processor; 16 GB Ram, 1 TB PCIe based SSD. The software version is OS X 10.9.4. I have AppleCare.
1. MY mac developed rainbow beach ball issues. Sometimes it'll last for ages. I took several videos of them. I spent hours chatting with online Apple advisors. They did everything they could possibly do: Repair Disk, Repair Disk Permissions, SMC reset, PRAM reset. When nothing worked, I did clean-install the Mac six or seven times. Every time other apps would randomly cause the spinning ball issues. My Mac even restarted all on a sudden because of kernel panic. So at last, I took it to an Apple Store which is a one-mile drive from London. They diagnosed it as a graphics issues and replaced the Main Logic Board and put it to standard testing which revealed no other anomalies. After the repair, I noticed that dock icons remain present for a dew seconds when I restart or shut down the computer. So this time I took it to a London Apple Retail Store. The Genius at first diagnosed it as a display burn-in issues and sent it to be replaced with a new one. However, next day the technician who actually worked on the computer, phoned me saying that they could not reproduce any issues and did not replace the display either. I went to take my Mac back and discovered that the dock icons stuff still persist when restarting or shutting down the Mac. When I drew their attention, they told me that it was a software issue that Apple is aware of. Apple might resolve the issues in the future updates. Well, after getting back to my hotel room, I clean-installed my OS from USB and the dock icon issues were gone. Same version of software, but different behavior.
2. But that's not the reason I'm here. My Mac has again begun to show the rainbow beach ball one day after the repair, when I try to connect to my Airport Time Capsule through Finder in order to selectively transfer files to my Mac. This time the spinning ball would last for a very short time. But if I want, I can regularly reproduce them. I've also noticed this when installing MS Office for Mac 2011 edition. I'm sure I'll get the nasty ball as I use the Mac more and more.
3. I've got some questions: Can it be that during the MLB replacement, some other connectors got harmed? Or the issues are not specific to graphics only? Why didn't Apple find any anomalies during testing? I'll go to Apple Retail Store again, when I get the chance to. Once there, can I ask them for a full replacement of the Mac? Shall they take my request otherwise? I really don't feel comfortable using a shouldered computer which is going to go through many parts replacements.
4. I sincerely need your feedback. Please help me guys out there.

Applecare was no help at all. I called and did the complaint. They confirmed that it is registered to me and everything but essetially told me that they cant give me answers as to what is taking so long. They knew a repair was in progress but wanted to set me up with an appointment at an apple store? (the nearest Apple retail store is Billings which is 240 miles away, or about 4 hours). i tell them its at the repair place and they go on to tell me they can send me a box to mail it in and have it reapir by them.. They are trying to shift the blame to the AASP and his rep. But he said he has been trying with very few answers from Apple as well

Palm TX replacement unit has white screen issues even after hard reset

I hope somebody can help me find a solution.
   I was a happy Palm OS user since the early days of Palm III. After a Palm III and a V, had a Sony Clie that lasted a long time, but finally pooped out, went to a Z22 and broke the screen, then almost but not quite a year ago (in warranty, supposedly), purchased a Palm TX. Worked great for a while but ended up with a unit I couldn't turn on or off because the power switch had died. Worked around that by keeping the sync cord in and powering on by pushing the button and then canceling. Finally sent it in for in-warranty repair. Got back a new-to-me unit.
   This worked fine for almost a month, then it started (with no new software or usage patterns) to have blank screen issues. To solve this I have tried many things. Soft resets, hard resets, leaving it to fully run out its battery for weeks at a time. Nothing works; it continues to go blank on me. In addition, the sound is strange and screechy when it beeps (e.g. accepting time zone after reset). I bought the TX in the US when I was home for a visit last July, but am living in the Netherlands currently.
   I contacted the Palm repair center in the UK that replaced my original unit; they said would pass on word of my troubles to Palm and Palm should contact me, otherwise to e-mail them.  They haven't. I can't find an e-mail address for to explain all of this to anyone with any power to help me. I have tried to use the Palm support website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now is showing up as eligible for warranty repair.  I have tried to call the US Palm support number (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "calling is temporarily unavailable." When I click "here" when asked "If you wish to query the warranty status of your handheld, or would prefer to arrange a repair through our Technical Support service, click here" (https://www.euroservice.palm.com/repair_entry/NLD/EE) I end up on a page that says simply "Please Enter the Source Url." I am hesitant to supply credit card information for an issue that, if it can't be covered under warranty (which I think it should be, since I'm still within the original 12 month warranty period), I may well abandon.
    I am very frustrated in trying to get this fixed. I am disappointed in the dwindling support for a PDA (that is not a phone) with Palm OS. Since I am living (though not comfortably or well) without my calendar, address book, alarm, reader, dbs, cookbook, checklist, etc., I am seriously considering leaving the Palm OS. My preference is to get this fixed, and my idea nearly a year ago was to ride the Palm OS until it disappeared completely (subsumed into phones anyway), but my problems have discouraged me to the point that I am wondering if this is my end.
   Does anyone have a suggestion?
Post relates to: Palm TX
This question was solved.
View Solution.

Thanks for your help!
I don't know how to tell for certain if this is a US or a UK device, but it looks identical to the one I bought in a store in Seattle, and the first five and the last two num/letters of the serial number are identical.  I do know that when I sent it in originally for the power button failure, that the Palm repair center understood that it was a Palm purchased in the States.  Their description of the goods received is "Palm TX , US and ML" so it seems apparent that they knew it was a US device and rather than refusing to repair it, they had me send it to them. And when my repair was returned, the repair details list "unit exchange" and type of unit is again listed as Palm TX US & ML.
Well, regardless, I appreciate your pointing me in the right directions to someone who can help me.
Ironically, I am no longer having the same issues with the Palm.  The latest round of letting the power run out after a hard reset and sit for a few weeks seems to have "fixed" it.  At least, I have been trying to break it (by using it) without success.  Recharged it, synced it, checked and sent mail with it, used all the programs I used to, and I haven't had a white screen in the past few days. Hope my luck continues, but I don't trust it.  All hail frequent syncing.
Thanks again.

HP ENVY m6 Notebook PC trackpad issue even after HP repair

2 weeks ago i sent my HP ENVY m6 Notebook to the HP Repair center because i was having major issues with the trackpad. It would not move fluidly,and click, and move on its own.
I received my laptop back today anticipating that everything would work perfectly but some of these same issues are still occuring. The touchpad and the cable that connects it were both replace and the laptop was wiped clean.
The toucpad will work for sometime then all of a sudden become glitchy. This is really effecting my usage of the computer. It is a huge inconvenience to pay for a laptop and have a major component malfunctioning. I'm currently using a wireless mouse again.
Since the hardware was replace is there a software problem. This sems to be occuring to so many people.
What is going on?

http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=HP%20ENVY%20m6%20Notebook&search_search...
1. Please click on the above shown link and select the exact notebook model
2. Select the exact and relevant Operating System for your notebook
3. Click on Driver - Keyboard, Mouse and Input Devices
4. Please download and install the Touchpad Drivers on your Notebook
Hope this helps, for any further queries reply to the post and feel free to join us again
"I work for Hewlett-Packard"
* * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * *
* * * * * Please mark Accept As Solution if it solves your problem * * * * *
Regards,
K N R K

Visualisation issues even after changing gfx.direct2d.disabled to be true

I had a really weird defect rendering text and pictures. Searched in the net and found out the resolution to change the value of gfx.direct2d.disabled from false to true. Things went better and now I see pages well. However I still discover issues especially with drop-down menus - I can't see any of them. Also if for example my download finishes the little pop-up window which appears at the bottom right corner is visualized in the same manner - blurred white-blue lines with nothing that can be distinguished. I'd be glad if I could send you a snapshot. The problem does not persist in other browsers , so it's not a hardware one.

Hello, toggle the '''gfx.direct2d.disabled''' to false again, and toggle the '''gfx.content.azure.enabled''' to false, and check firefox again, otherwise try to
disable hardware acceleration in Firefox, go from Firefox button > Options Oprions > Advanced > General > Browsing: "Use hardware acceleration when available" [ ].
thank you

No Service issue even after Iphone Restore

Hi,
I am getting No Service issue on my iPhone 4s. So I restored it in recovery mode by connecting to iTunes. However, there was no luck, the problem persist. Now, I am suspecting that this could be the hardware issue.
My main concern is, 3 years earlier, I bought this device in US and I am in India now. Also the device is out for warranty. I am not sure how do I connect to US support and get this thing repaired or replaced.
Anybody who had done this before?
Regards,
jay

Thanks for reply Lyssa,
Yes, the phone unlocked by the carrier before you relocated to India. And I contacted the carrier in India, they replaced my SIM and its working fine with other phone. However with same SIM I am getting No Service on my iPhone.

Adobe reader issue even after latest update

I have installed the recent adobe reader on my windows 7 (g 72- C55DX notebook PC) multiple times but it will not open files. A message comes up: "please update your adobe reader". based on the online support i have fixed my settings and enabled javascript as well but still no improvement I am not able to open files. Please let me know what I should do to resolve this matter.Thank You!

Chrome and Firefox use their own PDF viewer, not the Adobe Reader plugin.
That leaves Internet Explorer; what is the exact message you get in IE - can you post a screenshot?

Skype 6.18 crash even after exception provided for EAF

Hi Support,
We have deployed EMET 5 to our 50 users. We observed that some Windows 7 x64 and Windows 8.1 x64 are facing issues with Skype. We observed that EMET is causing exe to stop. Uninstalling EMET resolve the problem and EMET 4.1 update 1 works fine with Skype
6.18.32.106 version. Our group policy already specify EAF, EAF+ protection are disabled for Skype.
It does not work even after downgrading Skype to any lower version. Can you please suggest best way to resolve the problem?
1. Upgrade EMET 5 from version 4.1 update 1
2. Upgrade Skype from version 6.14 to 6.18
3. Quit Skype and Restart application

Skype throw below error in event viewer
Faulting application name: Skype.exe, version: 6.18.60.106, time stamp: 0x53d154b0
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0xe06d7363
Fault offset: 0x0000c42d
Faulting process id: 0x31ec
Faulting application start time: 0x01cfb0a510194fc2
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 4ea3c722-1c98-11e4-9ab4-f8b156c39b2b
EMET error:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Skype.exe
P2: 6.18.60.106
P3: 53d154b0
P4: KERNELBASE.dll
P5: 6.1.7601.18409
P6: 53159a86
P7: 000006a6
P8: 0000c42d
P9:
P10:
Attached files:
These files may be available here:
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Skype.exe_7e29ea3d4cc8a8552ac2bf4a961b6348a4ac310_314b936e
Analysis symbol:
Rechecking for solution: 0
Report Id: 0a6699c2-1c98-11e4-9ab4-f8b156c39b2b
Report Status: 0
EMET detected DEP mitigation and will close the application: Skype.exe
DEP check failed:
Application : C:\Program Files (x86)\Skype\Phone\Skype.exe
User Name :
Session ID : 1
PID : 0x2FC8 (12232)
TID : 0x2560 (9568)
Module : N/A
Mod Base : 0x00000000
Mod Address : 0x00FAAD78
Mem Address : 0x00FAAD78

Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

Hi Guys,
I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots.
1st Hardware Config:
Intel Core2Quad Q9450
4x2GB DDR2
MSI P43 motherboard
Ati Radeon x550 video card
Software used, that seemed important for me to mention:
NOD32 v4.2
Comodo Firewall 5.12
Chrome
Screenshot Captor
SpeedFan
Other mentions:
Aero is disabled, because I've considered that it's one of the causes.
So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
Intel Core i7 3770k
4x8GB DDR3
Asus P8Z77V-LX motherboard
Intel GPU integrated in the 3770k CPU
The problem just happened 2 times on this rig also, and the RAM was not even coming close to it's maximum capacity of 31.7GB. It was at ~20GB's.
Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
My suspects:
1) some desktop manager bugs, or other similar issue
2) video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think that it is at 256MB.
3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
4) Adobe Shockwave Flash - maybe this one????
I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
http://imgur.com/a/Mc8hI#4
Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
Same thing still happens on the new configuration. Please advise me.
LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

Hi,
First, please be ensured that you have installed the latest drivers and all the updates.
Then check whether this issue will not in
Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
Clean Boot mode.
In addition, try to create a new profile to see how it works.
Hope this helps.
Vincent Wang
TechNet Community Support

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
AndreaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

Skype mic issues even after crating dummy ALSA

Similar Messages

Maybe you are looking for