Skype setup UI issues with enlarged desktop item s...

The issue is with the latest automatic update.
With enlarged size of desktop items and fonts (Control Panel->Appearance and Personalization->Display->Change the size of all items) the text in the setup window overlaps with some setup options, effectively making them impossible to see and click. I'm using Windows 8.1 (Russian). Screenshot attached.
Setting desktop item size back to 100% fixes the window.
Attachments:
skype_setup2.png ‏135 KB

That's been a known issue for quite some time they have yet to address.  Higher than normal DPI settings will cause that issue.  The only solution is to set your DPI settings to normal temporarily or disable DPI scaling for the executable.

Similar Messages

  • Urgent : Issue with deleting Line Item in ME22N

    Hi all,
    I have an issue with deleting line item in ME22N for some Purchase Orders.
    When I try to delete the line item, a warning message comes up saying that " Quantity invoiced or delivered is less than the quantity ordered". And I am unable to proceed further and save the PO. Could anyone let me know as why this is happening?
    Thanks in advance.
    Regards,
    Adapala.

    Hi
    there is no need of group key.
    if any of these 3 are done, payment will be done in total.
    1.In setup all company codes for payment transactions , DESELECT seperate payment per business area check box
    2.In setup paying company codes for payment transactions , DESELECT seperate payment for each reference check box.
    3.In the Vendor Master got to payment transactions tab and below the payment method , there will be individual payment checkbox. DESELECT that check box.
    try again with first two with DESELECT options , i will check out with DME.
    Cheers

  • Paper Size issues with CreatePDF Desktop Printer

    Are there any known paper size issues with PDFs created using Acrobat.com's CreatePDF Desktop Printer?
    I've performed limited testing with a trial subscription, in preparation for a rollout to several clients.
    Standard paper size in this country is A4, not Letter.  The desktop printer was created manually on a Windows XP system following the instructions in document cpsid_86984.  MS Word was then used to print a Word document to the virtual printer.  Paper Size in Word's Page Setup was correctly set to A4.  However the resultant PDF file was Letter size, causing the top of each page to be truncated.
    I then looked at the Properties of the printer, and found that it was using an "HP Color LaserJet PS" driver (self-chosen by the printer install procedure).  Its Paper Size was also set to A4.  Word does override some printer driver settings, but in this case both the application and the printer were set to A4, so there should have been no issue.
    On a hunch, I then changed the CreatePDF printer driver to a Xerox Phaser, as suggested in the above Adobe document for other versions of Windows.  (Couldn't find the recommended "Xerox Phaser 6120 PS", so chose the 1235 PS model instead.)  After confirming that it too was set for A4, I repeated the test using the same Word document.  This time the result was fine.
    While I seem to have solved the issue on this occasion, I have not been able to do sufficient testing with a 5-PDF trial, and wish to avoid similar problems with the future live users, all of which use Word and A4 paper.  Any information or recommendations would be appreciated.  Also, is there any information available on the service's sensitivity to different printer drivers used with the CreatePDF's printer definition?  And can we assume that the alternative "Upload and Convert" procedure correctly selects output paper size from the settings of an uploaded document?
    PS - The newly-revised doc cpsid_86984 still seems to need further revising.  Vista and Windows 7 instructions have now been split.  I tried the new Vista instructions on a Vista SP2 PC and found that step 6 appears to be out of place - there was no provision to enter Adobe ID and password at this stage.  It appears that, as with XP and Win7, one must configure the printer after it is installed (and not just if changing the ID or password, as stated in the document).

    Thank you, Rebecca.
    The plot thickens a little, given that it was the same unaltered Word document that first created a letter-size PDF, but correctly created an A4-size PDF after the driver was changed from the HP Color Laser PS to a Xerox Phaser.  I thought that the answer may lie in your comment that "it'll get complicated if there is a particular driver selected in the process of manually installing the PDF desktop printer".  But that HP driver was not (consciously) selected - it became part of the printer definition when the manual install instructions were followed.
    However I haven't yet had a chance to try a different XP system, and given that you haven't been able to reproduce the issue (thank you for trying), I will assume for the time being that it might have been a spurious problem that won't recur.  I'll take your point about using the installer, though when the opportunity arises I might try to satisfy my cursed curiosity by experimenting further with the manual install.  If I come up with anything of interest, I'll post again.

  • Issue with Setting Application Item

    Hi All,
    I have an issue with setting the value of application item G_USER_ID as part of the login process.
    I use customized authentication for login. I have created an application item G_USER_ID, and in my CUSTOM_AUTH procedure, I am setting its value as APEX_UTIL.SET_SESSION_STATE('G_USER_ID', l_user_id);
    For some reason, the value is not set to G_USER_ID the first time I login. When I log out and login again without closing the browser, the value is set. Note that I even tested with a static value instead of l_user_id like APEX_UTIL.SET_SESSION_STATE('G_USER_ID', '5555555'); but still fails to set during the first login.
    I hope someone can guide me as to what I am doing wrong here.
    Thanks!
    JMcG

    What does this do?
    :SVR_FLAG := NVL(l_mult_svr,'N');
    Scott

  • Skype Sign In Issue with Nokia E5

    Hi Friends,
    I am facing skype log in problem in my mobile Nokia E5 where as via PC i can logged in successfully. Through mobile whenever i try to log in skype it shows skype sining and later on after few seconds it stop working. Plz suggest how can i resolve this issue with my Nokia E5 ?

    Hi kishor12345,
    To further verify, are you using the internet browser when trying to access the Skype? If so, have you tried browsing the other website wherein you need to sign in your account first before you can proceed? In case that you are using mobile data, please use Wi-Fi connection instead. You may also restart your phone by switching the phone off, take the battery out, put it back in after a few seconds and switch your phone on.
    Let us know how it will go. 

  • Datagrid sorting issues with 1/0 items to consider

    Hi all,
    I have an issue I can't find a way to fix. I am using a datagrid which I pouplate through a XMListCollection based on some XML datas.
    XML:
    var prefs:XML = <files>
    <file name="@toto" favourite="1"/>
    <file name="@toto"favourite="0"/>
    </files>;
    XMLListCollection
    var xlc:XMLListCollection = new XMLListCollection( new XMLList ( prefs.file) );
    MXML
    <mx:DataGrid id="filesList" width="100%" height="100%" dataProvider="{xlc}">
    <mx:columns>
    <mx:DataGridColumn width="25" dataField="@favourite"sortCompareFunction="favourite_sortCompareFunc"/>
    </mx:columns>
    </mx:DataGrid>
    Sorting fucnction:
    private function favourite_sortCompareFunc(itemA:Object, itemB:Object):int {
        var value1:Number = Number( itemA.@favourite );
        var value2:Number = Number( itemB.@favourite );
        if(value1 < value2){
             var n:Number = -1;
             return n;
        else if(value1 > value2){
             return 1;
        else{
             return 0;
        return 1;
    Once loaded, the datagrid appears in a "normal state":
    But if I try to sort first column, it becomes messy
    I think it might be related to the fact that the data to be sorted is only made of 0 & 1. But I can't imagine this kind of situations is not fixable.
    Any hint ?
    Thanks in advance for any advice,
    Loic

    Hi guys,
    First of all, all my apologizes for my silence. I had technical issues with Yahoo mail that made me miss 3 months mail ! So I just missed your posts and I can only come today to thank you all for your care and answers.
    In the meanwhile, I finally got it working by doing…nothing. Let me explain. The issue was caused by equal datas ( 1 or 0 ). So Flex couldn't sort 1 and 1 or 0 and 0 by itself. But these 0 and 1 were flags for an itemrenderer made of a button in toggle mode. 1 standed for on, 0 for off.
    Doing so I did override updateDisplayList and then the issue went away. But if I had to stick with pure datas ( 1 or 0 ) I think I would have had to do a custom sort function to deal with equal datas like a few of you offered.
    @DonMitchinson the @ stands for the xml attribute as the datagrid is populated with XMLListCollection from an XML file.
    Thanks for your sharing,
    Best,
    Loic

  • Different issues with file browse item

    Hi everybody,
    I'm trying to create a file upload page using the file browse item. To achieve this I followed the how-to document :
    http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b16376/up_dn_files.htm.
    I've created my own table to store the documents as I store some extra information.
    When I test this functionality I discovered many issues.
    - If I upload a PDF file this gives me HTTP 404. When I go back, choose the same file with the browse button and upload again this will pass.
    - If I upload a file with spaces in it's name this file will be uploaded twice. (I see the same file two times in the table with 2 different names.
    - At random times I will just arrive at a blank page after clicking the upload button. It appears to me as this will happen more often when I use a double-click to select the file in the browser dialog compared to selecting the file and clicking open. However, I suppose this is just coincidence. It happens in both cases. I'm confronted with the problem with small files (1k, 4k) as well as with larger files (6m)
    - Like I said before, I store some extra information as well. In some cases this information is stored with the document. In some other cases he takes the description from a previous document to store along with the new document. I suppose this is some kind of session problem probably caused by the other problems I currently have and the fact I press back quite often in my browser (each time I arrive at a blank page)
    Version of HTML DB 2.1.0.00.05
    (Included with Oracle 10g express edition)
    I read several posts on this forum before creating my own thread.
    -> I found several discussions about the size of the file but the problem exists for files of 1K as well so I don't see a link with those discussions.
    -> I found several discussions about security and tablespace quota. I granted unlimited tablespace to each and every user : flows_020000, flows_020100, flows_files, htmldb_public_user and the user who is used in the application.
    Tx very much for your help!
    Kris

    Hi Kris,
    I think you're problem is coming from local session info... using the back button is not that good. Put a back button in your application ;-)
    An other thing I wonder is; are you developing and testing on the same machine and at the same time? - I did that before and that gave me some problems. Now I'm developing in Firefox and test with IE or vice-versa.
    Dimitri

  • Ipad mini syncing issues with itunes : (x) items could not be synced

    I'm using ipad mini (non retina) 16GB with itunes 11.2.2.3. I had downloaded some games from itunes like asphalt 8, GT racing 2, infinity blade, real racing 3, dead trigger 2, and apps like garageband. When i tried to sync these games with my ipad. everything happened normally like
    syncing apps to 'superhornet's ipad' (step 6 of 6)
    copying 1 of 8: asphalt 8
    and later 'finished syncing'
    but after syncing is finished on itunes. A message appears on the ipad saying '14 items could not be synced. see itunes for more information'
    there is no message in the itunes that would tell what issue happened here.
    Due to this, the games i mentioned above does not get installed on my ipad. all i get is their greyed out icons which shows their name below them, when i touch any of those greyed icons they start showing 'installing' which never really completes.
    I have also tried to install apps by ifunbox, but it showed some error when i tried to sync those games.
    This issue doesn't happen with all the games. I had also downloaded games like 'the sandbox, ACR drift, shadow gun and they were installed without any issues.
    I had never played any game on my ipad. so far i had only used it as an ebook reader, video player and internet browser. so i have no idea if this problem existed before.
    and yes my computer is authorized, and i successfully sync all videos, music, ebooks with it.
    my PC's specs:
    AMD phenom II X4 B25
    4GB RAM DDR3 133MHz
    AMD radeon HD6770 1GB GDDR5
    Gigabyte GA78LMT-S2P
    my ipad is running iOS 7.1
    and itunes version is 11.2.2.3 (updated yesterday expecting it would solve the issues)
    I would appreciate if anyone could help me with this

    Found another thread with a few possible solutions. The one that worked for me was to delete the ipod photo cache in the "Pictures" folder. Here's the thread: https://discussions.apple.com/thread/3390697

  • Programs Crashing or 'Quit Unexpectedly' Could this be a issue with my desktop?

    I've been having problems with some of my programs crashing the last few days. Including Photoshop CS6, Adobe Application Manager, and Google Chrome. All crash with the problem report saying the program 'quit unexpectedly.' Could this be an desktop issue?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Issue with inserting edit item form using sharepoint designer 2013

    Hi,
    I inserted an edit form of a custom list in a site page using sharepoint designer-2013. But it is giving error "no item exists". 
    I am using default ListItemId Parameter with ID query string and I passed the query string parameter to that page. But still the result is same. But if I give any default value, page is displaying fine for that specific item although I dont pass any querystring
    to the page URL.
    Can you please guide me?
    Thanks in advance.
    Regards,
    Chaitanya

    Hi,
    From your description, I know you get issue when you add “edit form” of custom list to a page.
    I tried to reproduce your issue, and if I added “edit form” to page without “Advanced Mode”.
    I add “edit form” to page with steps below:
    Right click the page, click “Edit File in Advanced Mode”.
    Find source with keywords [ContentPlaceHolderId="PlaceHolderMain"].
    Choose INSERT tab in the Ribbon.
    Click “Edit Item Form”, and choose the custom list that you want to add.
    Save file, and go to the page.
    The screenshot below is my result:
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • AirPort Express setup/configuration issues with FiOS

    I just spent the last 6 hours trying to set up AirPort Express so I can play itunes wirelessly on my stereo system. I came across several issues—some that i overcame and others that i will certainly lose sleep over tonight. I started by connecting the AE to a LAN port on Verizon FiOS wireless router using an ethernet cable, then plugged AE into an outlet (i assume this is the only way AE can get a signal). I then went through the entire configuration process and got to the last screen which said something to the effect of "the settings have been successfully updated. you can close this window or wait for the AE to restart". after a few minutes of seeing "waiting for AE to restart", it timed out and i got an error message: an error occurred while reading the configuration, blah blah blah. the error was -6753, if that's any help. all night i've been resetting the AE with a paper clip and trying it over and over again to no avail. i'm pretty mac fluent, so this has been incredibly frustrating. any advice from anyone would be greatly appreciated. thank you!!

    Not a network guru by any means, but do have some experience with AEs. Try connecting an ethernet cable from the AE directly to your mac to make the initial setup using the Airport Utility (double click the AE in the list to open the configuration; set the settings in each tab). Once your done, 'update' the settings and wait for the AE to show up again in your AE Setup assistant. Now you can unplug from mac and plug into your router.
    As far as settings go. You can either 1) 'join a wireless network' (use existing login/pass from wireless network; no cables required), OR you can connect AE to router via ethernet and 2) 'create a wireless network' (and use this new wifi network for all communication including Airplay) or 3) wireless mode 'off' (only use AE for Airplay connected through the wired network). Lot of options.

  • Ge force 314.22 video driver issue with new desktop

    I bought my Envy Phoenix h9-1340t new from HP in January.  A month and a half ago, I updated the video driver from Nvidia's website and the video card stopped working correctly.  I contacted tech support.  They had me disable all my Windows Drivers and had me run the computer in selective startup.  The video card then worked and they said the problem was fixed.  I told them this did not seem to be a solution to me so they sent me a new video card.  That did not fix the problem.  I was told to send the pc back to HP for a repair.  I just got it back today and I saw the only thing they did was replace the video card again.  I contacted HP and they said the problem was with Nvidia's driver and told me to only update the video driver through HP.  I registered with Nvidia and posted my issue.  The feedback was unanimous, the issue lied with the configuration with my computer and not Nvidia's driver.  Could someone please help me out with this issue?
    This question was solved.
    View Solution.

    Hello again pinktoe.
    If using selective startup allowed the drivers to work properly then there has to be something in that list causing you problems.  You need to determine what exactly is causing the issue.  I suggest trying the following.
    Press the Windows+X keyboard combination.
    Select "Run."
    Type "msconfig" and press Enter.
    Start by using selective startup to boot without services or startup items.  However, only select one.  
    Save the changes and reboot the notebook.
    If the problem persists go back to msconfig and re-enable the disabled item.  Disable the other item, save your changes, and reboot again to verify that the issue does indeed disappear through this option.
    If the issue disappears when disabling the services you'll want to try the following.
    Select the Services tab.
    Check the "hide all Microsoft services" box in the bottom left.
    Disable all services.
    Re-enable the first 5-10 services, save the changes, and reboot the computer.
    If the problem returns then you know it is one of these services and you can continues disabling the enabled services until you find the culprit.
    Repeat as needed until the culprit is discovered.
    Post the result.
    If the issue disappears when disabling the startup items you'll need to repeat the same process.
    Once you determine which item(s) are causing the issue make sure to post the result.
    Have a good day! 
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Issue with purchase order item

    Hi Guys,
    When entering or changing an order in SAP via VA01/VA02, the system will not allow the entry of leading zeros in the Purchase Order Item (VBAP_POSEX) field which is defined as character 6. Leading zeros can be entered in the Customer Material (VBAP_KDMAT) which is also defined as character. Some customer PO Item numbers begin with leading zeros and they want to see them on output. Does SAP have an OSS note for this?  any helpful suggestion would be well appreciated.
    Thanks!
    Edited by: MK18774 on Oct 5, 2009 9:57 PM

    there is a include FV45PF0V_VBAP-POSEX_PRUEFEN
    that checks PO number and item number .... with your own EKPO (purchase order item) table.
    and this include has as well the routines to convert the number: CONVERSION_EXIT_ALPHA_INPUT

  • Issues with old calendar items after migration from SBS2008R1 to Windows 2012R2+Exchange 2013

    Hello,
    After migrating a customer from Windows Small Business Server 2008 R1 to Microsoft Windows Server 2012 (DC) and Microsoft Windows Server 2012 & Exchange 2013 there are a few issue regarding
    the GAL and old migrated calender items that we are unable to resolve:
    Old calender items which were Exported to PST when the Server 2008 R1 environment was still live were imported to the new mailbox of the user, located on the Exchange 2013 mail database. This
    seemed to be working just fine.
    The problems arise when a user tries to edit or re-send an old calender item. There actually are 2 problems:
    1. When resending an old calender item, OLD GAL entries are used (even when re-entering the contact details) and the emails are send to nobody and you get the mail back from postmaster
    2. When updating an old calender item you get an error that you do not have permissions, probably because you are NOT the 'old' Exchange user.
    Thanks in advance!

    Did you use Exmerge or similar to export?
    You may have an issue like that explained here.
    http://blogs.technet.com/b/sbs/archive/2009/05/21/cannot-reply-to-old-emails-or-modify-old-calendar-items-after-pst-mail-migration.aspx
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Issue with WHEN-VALIDATE-ITEM trigger in Forms 6i

    I am working with a form(A) which displays a modal window(B) with some database fields on it when a button on the form was pressed.
    First as soon as I pressed the button on the form A the modal window B appears with the values as (for example)
    Scenario - 0
    field 1 - OTHER
    field 2 - 123-456
    field 3 - 14-JUN-2006
    field 4 - Old Contract
    Scenario - 1
    If field 1 is changed/updated to a value NONE then the remaining fields should grey out and should not allow the user to edit/update those fields. Also it should clear all the data in the fields and should display only blank fields. Now the only updatable field in this case is field 1 which has value NONE at this moment.
    field 1 - NONE
    field 2 - NULL
    field 3 - NULL
    field 4 - NULL
    Only if the user exits the modal window B and clicks on SAVE button which is on the form A then only the data changes are committed to the database tables.
    At this moment I don't want to exit the modal window B which means the data changes are not yet committed to the database.
    Scenario - 2
    Now if field 1 is again changed/updated to a value ANOTHER then the remaining fields has to be populated accordingly using the values from the form A and B and it should allow the user to edit/update the remaining fields in window B.
    field 1 - ANOTHER
    field 2 - 123-456
    field 3 - 14-JUN-2006
    field 4 - Old Contract
    Now if you observe Scenario - 0 and Scenario - 2 only field 1 is differing. Rest of the three fields are same. As I didn't exit from the modal window the changes were not committed to the database.
    If the order of the scenarios is like below:
    Case1 : Scenario - 1 & Scenario - 2
    Case2 : Scenario - 1 & Scenario - 0
    I am able to successfully handle the above two cases as initially the three other fields are set to NULL and the user will be able to update the data and can commit the data.
    If the order of the scenarios is like below:
    Case3 : Scenario - 0 & Scenario - 1
    Case4 : Scenario - 0 & Scenario - 2
    I am also able to successfully handle the above two cases as finally the three other fileds are set to NULL and the user will be not be able to modify them and obviously NULL values will be stored in the database when committed.
    Now the problem is with the following order.
    Case5 : Scenario - 0 & Scenario - 1 & Scenario - 2
    Case6 : Scenario - 2 & Scenario - 1 & Scenario - 0
    In the above cases we can successfully handle until Scenario - 1 but when comes to Scenario - 2 how can we be able to display the data as shown.
    I have tried to perform this using WHEN-VALIDATE-ITEM on field 1. When the field 1 is changed from OTHER to NONE I have assigned NULL to the remaining fields. So it's working fine as I mentioned earlier. Now if I change field 1 from NONE to ANOTHER its allowing to update the remaining fields but its not populating the data.
    Can anyone help with this?
    Thanks for the patience in reading the problem....

    Yes, if you use the debugger as Gerd said you can get and see the data as the code executes line-by-line. You can also use message statements in your code to display the data.

Maybe you are looking for