Skype to go -- "manage" registered phones in multi...

I use Skype to Go and normally live in the USA. Because I travel I want add different phones from countries I work in, like Sri Lanka and France.
When I go to "manage" registered phones and then try to add a phone, it shows the oiginal US number and does not allow me to change the country. How can I do this?

7piliers wrote:
How can I do this?
Hello,
By changing your location to the relevant country. Your existing contact #s will not be affected.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

Supplier User Management- Register Supplier User

Supplier User Management > Register Supplier User
I do this on the form and it sets up a supplier user with no problem. It even sets up the securing attribute for the user with the iSupplier Portal id.
Is there a way to do this registering on the backend? An API I don't know about? Or some other way to do this?
Thanks

Not sure about APIsor WFlows, but I did some work on iSupplier a while ago, and found this SQL useful.
#       iSUPPLIER APPS.PO_SUPPLIER_USERS_V VIEW
        GENERATES LIST OF iSUPPLIER USERS
        LINKED TO SUPPLIER TABLES
SELECT *
FROM apps.po_supplier_users_v;
#        iSUPPLIER EXTERNAL SUPPLIER REGISTRATIONS
SELECT   *
    FROM pos.pos_supplier_registrations psr
ORDER BY psr.creation_date DESC;
#        iSUPPLIER FND REGISTRATIONS
SELECT fr.registration_id
     , fr.creation_date
     , DECODE(
          fr.registration_type
        , 'POS_REG', 'BY_CCC'
        , 'POS_SUPP_REG', 'ONLINE'
       ) status
     , fr.registration_status
     , fr.user_title
     , fr.first_name
     , fr.middle_name
     , fr.last_name
     , fr.email
     , fr.phone
     , fr.requested_user_name
FROM apps.fnd_registrations fr;
#        iSUPPLIER PRODUCTS AND SERVICES
SELECT *
FROM apps.pos_sup_products_services psps
     , apps.fnd_lookup_values_vl
WHERE psps.vendor_id = '65352'
   AND fnd_lookup_values_vl.lookup_type = 'POS_SUP_PROD_SVC_STATUS'
   AND fnd_lookup_values_vl.lookup_code = psps.status
   AND fnd_lookup_values_vl.enabled_flag = 'Y'
   AND fnd_lookup_values_vl.start_date_active < SYSDATE
   AND (
           fnd_lookup_values_vl.end_date_active IS NULL
        OR fnd_lookup_values_vl.end_date_active > SYSDATE
#        iSUPPLIER BANK ACCOUNT CHECKING
SELECT   psbar.creation_date
       , psbar.request_status
       , fu.description supplier_user
       , fu.user_name supplier_username
       , pv.vendor_name supplier
       , psbar.last_update_date
       , fu2.user_name last_updated_by_userid
       , fu2.description last_updated_by_name
       , psbar.bank_name
       , psbar.bank_number
       , psbar.bank_branch_name
       , psbar.bank_branch_number
       , psbar.bank_branch_type
       , psbar.bank_account_name
       , psbar.bank_account_number
       , psbar.account_description
       , psbar.account_type
       , psbar.account_holder_name
       , psbar.notes_from_supplier
       , psbar.notes_from_buyer
       , psbar.address_line1
       , psbar.address_line2
       , psbar.address_line3
       , psbar.address_line4
       , psbar.city
       , psbar.county
       , psbar.state
       , psbar.zip
    FROM pos.pos_sup_bank_account_requests psbar
       , applsys.fnd_user fu
       , applsys.fnd_user fu2
       , po.po_vendors pv
   WHERE psbar.created_by = fu.user_id
     AND psbar.last_updated_by = fu2.user_id
     AND psbar.vendor_id = pv.vendor_id
     AND pvsa.purchasing_site_flag = 'Y'
ORDER BY 1 DESC;
#       iSUPPLIER APPS.PO_SUPPLIER_USERS_V VIEW
        GENERATES LIST OF iSUPPLIER USERS
        LINKED TO SUPPLIER TABLES
SELECT   fnd_user.user_name user_name
       , fnd_user.creation_date user_creation_date
       , fnd_user.last_logon_date
       , po_vendors.vendor_name supplier
       , po_vendors.vendor_id supplier_id
          user_parties.person_first_name || ' '
          || user_parties.person_last_name
         ) user_party_full_name
       , user_parties.email_address
    FROM apps.fnd_user
       , apps.hz_parties user_parties
       , apps.hz_parties company_parties
       , apps.po_vendors
       , apps.hz_relationships vendor_relationship
       , apps.hz_relationships employment_relationship
   WHERE fnd_user.person_party_id = user_parties.party_id
     AND employment_relationship.object_id = company_parties.party_id
     AND employment_relationship.subject_id = user_parties.party_id
     AND employment_relationship.relationship_type = 'POS_EMPLOYMENT'
     AND employment_relationship.relationship_code = 'EMPLOYEE_OF'
     AND employment_relationship.start_date <= SYSDATE
     AND employment_relationship.end_date >= SYSDATE
     AND vendor_relationship.object_id = po_vendors.vendor_id
     AND vendor_relationship.subject_id = company_parties.party_id
     AND vendor_relationship.relationship_type = 'POS_VENDOR_PARTY'
     AND vendor_relationship.relationship_code = 'PARTY_OF_VENDOR'
     AND vendor_relationship.start_date <= SYSDATE
     AND vendor_relationship.end_date >= SYSDATE
     AND fnd_user.last_logon_date IS NOT NULL
ORDER BY 2 DESC;
#        iSUPPLIER SPECIFIC PROFILES
SELECT DECODE(
          fpov.level_id
        , 10001, 'Site'
        , 10002, 'Application'
        , 10003, 'Responsibility'
        , 10004, 'User'
        , NULL, 'Not Set'
       ) profile_level
     , mw_level_values.mw_set_against set_against_id
     , fu.description person
     , fpot.user_profile_option_name
     , fpot.description
     , fpo.profile_option_name
     , fpov.profile_option_value
     , fpov.last_update_date
     , fpov.last_updated_by
FROM applsys.fnd_profile_option_values fpov
     , applsys.fnd_profile_options fpo
     , applsys.fnd_profile_options_tl fpot
     , applsys.fnd_user fu
     -- TABLE BELOW GROUPS ALL DATA INTO A BIG UNION FOR USE LATER ON
     -- ALL RESPS, ALL APPLICATIONS, AND ALL USERS
,      (SELECT '10001 0' mw_level_id
             , 'Set at Site Level' mw_set_against
          FROM DUAL
        UNION
        SELECT '10002 ' || fat.application_id
             , fat.application_name
          FROM applsys.fnd_application_tl fat
        UNION
        SELECT '10003 ' || frt.responsibility_id
             , frt.responsibility_name
          FROM applsys.fnd_responsibility_tl frt
        UNION
        SELECT '10004 ' || fu.user_id
             , fu.user_name
          FROM applsys.fnd_user fu) mw_level_values
WHERE fpo.profile_option_id = fpov.profile_option_id(+)
   AND fpot.profile_option_name = fpo.profile_option_name
   AND fpov.level_id || ' ' || fpov.level_value = mw_level_values.mw_level_id(+)
   AND mw_level_values.mw_set_against = fu.user_name(+)
   AND fpo.end_date_active IS NULL
--   AND LOWER(mw_level_values.mw_set_against) LIKE
--                           '%ccc internet procurement catalog administration%'
--   AND LOWER(fpov.profile_option_value) LIKE '%gov%'
--   AND LOWER(fpot.user_profile_option_name) LIKE '%one%time%'
--   AND fpot.profile_option_name LIKE '%FND_OA_ENABLE_DEFAULTS%'
   AND fpot.user_profile_option_name IN
          ('POS: External Responsibility Flag', 'Apps Servlet Agent'
         , 'Application Framework Agent', 'Applications Servlet Agent'
         , 'Applications JSP Agent', 'Applications Web Agent'
         , 'Default Country', 'Node Trust Level', 'HZ: Generate Party Number'
         , 'Applications Portal Logout', 'GUEST_USER_PWD'
         , 'iSP Default Responsibility For External User'
         , 'POS: Allow Invoice Backdating'
         , 'POS: Default Responsibility for Newly Registered Supplier Users'
         , 'PON: External Application Framework Agent', 'POS: External URL'
         , 'Sourcing Default Responsibility For External User'
         , 'Responsibility Trust Level', 'Default Country'
         , 'GL Set of Books Name', 'Applications Portal Logout');

Want to delete registered phones not listed in reg...

Due to security concerns I would like to delete all registered phones link to my account in skype to go. I have disabled that feature til I can do that.
Basically I have one registered phone listed but am unable to get the list of all the phones associated with my skypetogo feature. I know I have the following phone number authorized to use skype to go:
+1.703.348.XXXX (this is the only one listed in skype)
+1787505XXXX
+52.1.55.1894.XXXX
+52.55.5354.XXXX
and suspect others more, but right now cant delete nor see a complete list of the phones i added for skype to go . How can i get the complete list or delete all the phones.
Irvin

help?

I'm asked for my registered phone # and PIN

Why am I asked to enter my registered phone # and PIN?
When you call your Skype To Go numbers, you are identified by your registered phone’s caller ID and won’t need to enter your registered phone number and PIN for authentication purposes.
There are several reasons why you could be asked for your registered phone number and PIN:
You are calling your Skype To Go number from a phone which is not registered in your account yet. You can register more phones anytime in your Skype To Go account overview.
You are calling from your registered phone, but you may have made a mistake when entering your phone number in your Skype To Go account. Please check that you entered the correct phone number.
Your phone does not submit its caller ID. In your phone’s settings, ensure your caller ID is enabled. Your phone may also submit a caller ID different from your actual phone number (e.g. when using an office phone).
You may be calling an old Skype To Go number which you previously deleted. Please sigh in to your Skype To Go account to ensure you are calling the right number.
If you are still experiencing problems, then please submit a ticket with customer service, including your Skype To Go number and the time & date you tried calling.
Why does my verification fail after entering my registered phone # and PIN?
If you call your Skype To Go numbers from a phone not registered in your Skype To Go account, then we will ask you to enter one of your registered phone numbers along with your PIN for authentication purposes. Should you experience problems during this verification process then please check the following:
Please ensure you are entering the phone number of one of your registered phones, not the number of the unregistered phone you are actually calling from. You can register more phones in your Skype To Go account.
When prompted, enter your registered phone number in this format:
Country code + phone number + the “#” key
Example 1: You live in the US and your registered phone number is 333-444-5555, then enter:
0013334445555#
Example 2: You live in the UK and your registered phone number is 07777-888-999, then you enter:
00447777888999#
Please check your registered phone in your Skype To Go account. You may have made a mistake when entering your phone number.
If you are unsure whether you entered the correct PIN then create a new one
You may be calling an old Skype To Go number which you previously deleted. Please sigh in to your Skype To Go account to ensure you are calling the right number.
If your selected PIN starts with a "0" then verification may fail. This is due to technical issues which we are in the process of fixing. Please change your PIN to another one which doesn't start with a "0".
If you are still experiencing problems, then please submit a ticket with customer service, including your Skype To Go number and the time & date you tried calling.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

GE - SKYPE - Dect 6.0 Cordless phone doesn't compl...

Hi,
Two days ago, my skype phone model "GE - SKYPE - Dect 6.0 Cordless phone" stopped to complete calls. Weirdly skype (PC version) was with the same problem that day.
The call rings but when the other side answer, both sides can't hear nothing.
Today PC version is working normally however GE phone doesn't work anymore. I have tried other land numbers, but it doesn't work, people get the phone, but we can't hear each other.
I'm wondering if this kind of cordless skype phone has a expiration date of usage, even if is an old phone I believe that Skype should give support for this products.
Coincidence or not, Skype has just announced a new GE cordless phone (GE Digital Cordless Expandable Telephone)
I'm posing here because I can't find any other place to contact skype.

Hi jcantos,
Please be assured that your GE Phone is covered under a 12 month warranty and if the unit is deemed as defective, eBuyNow will reship them a new unit at no cost.
Before taking further steps please allow us to give you this troubleshooting to see if we can help you with your problem. Please ensure that the handset is within range of and linked to the base station. This is necessary for the telephone to charge.
When you put the handset into the charging cradle, you should see the following:
1. Charge indicator (RED LED) will light up permanently until the handset is lifted out of the charging cradle.
2. Handset initially displays "charging" within several seconds when the battery is low.
3. Handset will display scrolling battery icon for charging.
Please let us know the following:
1. Is the RED LED always off? Check if the handset charge pin really contacts to the charge cradle spring, as well as to verify if the sub-adapter connection is loose or not.
2. Is the battery not installed well? The handset will display "no battery". Disconnect and re-connect the battery pack into your phone.
3. Does the handset display "charging"? Wait a few minutes. If the handset starts to enter into stand by mode with the scrolling battery icon, the handset can be charged up.
4. Does the battery icon on the phone indicate battery low, but when put in the charger, indicates battery is fully charged?
5. Have you managed to successfully make a call from the handset?
6. Is the indicator light on of your base station?
The more information you can provide us with, the better we can assist you.
If you already went over the above and are still having problems, please contact our eBuyNow's Support team by visiting ebuynow.info/en/contact/ (add the http:// as this forum does not allow hyperlinks) and one of our agents will gladly assist you.
Best,
eBuyNow.Support.Pro

Skype not working on Android phone

Since installing the latest Skype version onto my Android phone, the application will not load, and always gives the message " The application Skype (process com.skype.raider) has stopped unexpectedly. Please try again. I have reinstalled Skype about 10 times now, and same message over and over. The previous version of Skype worked great on the Android.
10/6: We debugged further and found that Skype will not come up on the phone as long as the wired headset is plugged in. I have to disconnect the headset, and then Skype comes up. But if you connect the wired headset, then Skype will present that "stopped unexpectedly" message. So there is an incompatibility between the latest version of Skype with the wired headset? Why??? It should support it. The previous version of Skype worked fine on my Android phone WITH the headset.
I hope a fix will be provided immediately.

hey guys....
the way to get skyp to work is by CLEARING YOUR DATA from the app.
ive got an htc evo 4g...so i goto to settings, applications, manage applications, then i find skype, and then i press the CLEAR DATA button.
after that youll be able to login just fine...
i have no idea why you have to do that to make it work...you just do, lol...
and, youll have to do it relatively often...again, i have no idea why...
newaz, that shold take care of your login issues....gl!
cwick

Unable to Externally Register Phone Services on Cisco Jabber Client via Expressway E

Hi,
I have currently deployed Cisco Jabber along with Expressway C and E for external regeneration without VPN. I have successfully registered IM and Presence service externally on the internet and I am able to chat with other Jabber users.
I am not able to register phone services for Cisco Jabber client who are registering externally over the internet without VPN.
I have checked that all the users are able to use IM and Presence along with Phone services in the internal network and over the internet using VPN. I have configured the required DNS SRV records on both the internal and external DNS Servers.
I am attaching a screen shot of the Jabber Client that is registered over the internet along with this post for your reference.
Appreciate if you can share your thoughts on the same.
Please do let me know if you need any further informaiton.
Thank you.
Regards,
Joseph Chirayath.

I am testing with an android device, and I had to add a "digest user" on the BOT device in order for this to work. Phone services are now connected.

In my icloud account on my iphone I have three ios devices. How do I manage the backup of my old phone ? I dont want to detete that backup completetly, just manage that phone back up ? Please help!

In my icloud account on my iphone I have three ios devices. How do I manage the backup of my old phone ? I dont want to detete that backup completetly, just manage that phone back up ? Please help!

It will be backed up on your computer and can later be restored to an iOS device using iTunes, if desired. Of course, if your hard drive crashes you'll lose it if it isn't backed up somewhere else. If you want to included it in your computer backup, it will be located at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup

How to get the list of registered phones from RTMT

I need to get the list of the registered phones from RTMT in excel sheet or text file how i can do this ?????

The approach you need to take depends on your CM/CUCM version. In Windows based systems (3.3.3 to 4.2.3 at least, not sure about 4.3 actually) you can get data using devicelistx.asp. This is discussed in the thread that James provided (+5 James).
If you are dealing 5.x or later then you need to look at using RISport. It is a little more involved but more powerful than devicelistx.asp. Actually, I think RISport and the associated API was available in later 4x releases but was "hidden").
I have a brief intro here:
http://www.netcraftsmen.net/component/content/article/70-unified-communications/452-good-bye-devicelistxasp-hello-risport.html
I probably need to get some of my notes together and put some examples on my blog now that I think about it. Anyway, the above link is a quick intro with links to devicelistx.asp info and RISport API info.
HTH.
Regards,
Bill
Please remember to rate helpful posts.

Using file manager and phone browser without email...

I have nokia 6021, PC suite version 6.5.12 and windows xp home SP2 and I connect the phone to PC via bluetooth.
I just want to be able to view my phone "contacts" (just names and phone numbers) on my PC, edit my "contacts" on the PC and then load them back to the phone, but I do not want to synch with my email program because that is full of other contacts stuff that I do not want to clutter the phone memory with.
The bluetooth connection seems to work fine, but......
When I set up PC suite it wanted me to synch with an email program, but I just by-passed that. However, I cannot see my contacts files on the PC using file manager and phone browser. Is the only way to do this to actually synch with another email program that I use purely for the phone contacts?

ok guys, problem solved.
I just do a firmware update on my phone, though the firmware version was the same one, yet it's now able to back it up..

Failed Job Query on Central Management Registered Servers - Host Server is not included in results

The following standard query works great for showing failed jobs on servers. Executing this in Central Management Registered Servers works as expected, but the Host Server results are not listed, and the same query needs to be executed against the host server
too.
e.g.
Registered Servers are defined on Server A
Results are displayed from servers B, C, D & E - but results are not displayed for Server A.
How do we receive results from Server A without having to execute a separate query ?
DECLARE @PreviousDate datetime
DECLARE @Year VARCHAR(4)
DECLARE @Month VARCHAR(2)
DECLARE @MonthPre VARCHAR(2)
DECLARE @Day VARCHAR(2)
DECLARE @DayPre VARCHAR(2)
DECLARE @FinalDate INT
-- Initialize Variables
SET @PreviousDate = DATEADD(dd, -7, GETDATE()) -- Last 7 days
SET @Year = DATEPART(yyyy, @PreviousDate)
SELECT @MonthPre = CONVERT(VARCHAR(2), DATEPART(mm, @PreviousDate))
SELECT @Month = RIGHT(CONVERT(VARCHAR, (@MonthPre + 1000000000)),2)
SELECT @DayPre = CONVERT(VARCHAR(2), DATEPART(dd, @PreviousDate))
SELECT @Day = RIGHT(CONVERT(VARCHAR, (@DayPre + 1000000000)),2)
SET @FinalDate = CAST(@Year + @Month + @Day AS INT)
-- Final Logic
SELECT j.[name],
s.step_name,
h.step_id,
h.step_name,
h.run_date,
h.run_time,
h.sql_severity,
h.message,
h.server
FROM msdb.dbo.sysjobhistory h
INNER JOIN msdb.dbo.sysjobs j
ON h.job_id = j.job_id
INNER JOIN msdb.dbo.sysjobsteps s
ON j.job_id = s.job_id
AND h.step_id = s.step_id
WHERE h.run_status = 0 -- Failure
AND h.run_date > @FinalDate
ORDER BY h.instance_id DESC
John

Hi vsla,
According to your description, I do a test. When I designate a Central Management Servers and create server groups, then execute statements against
multiple configuration targets simultaneously, it
indeed only contains the results of server groups, you need to execute again on the host server (Central Management Servers) then display the results of Central Management Servers, because the Central Management Server cannot be a member
of a group that it maintains.
If you want to get all servers results by executing the statement one time. I recommend you use Local Server Groups, create new register server and add all servers to the Local Server Groups, then right click “new query
“, execute the statements, it will display all results about all servers. There are more details about administering multiple servers using Central Management Servers, you can review the following article.http://technet.microsoft.com/en-us/library/bb895144
http://technet.microsoft.com/en-us/library/bb964743
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I want to set the device manager to phone‏‎ Nokia ...

Hye
Please help
I want to set the device manager to phone‏‎ Nokia E71

I think this might be what you are after..
Select Options > Server profiles > Options > New server profile > Copy = No
Server Name
Nokia
Server ID
Nokia
Server password
firmupservpass
Access point
[select your preferred AP]
Host address
https://dms.update.nokia.com/dms/omadm
Port
443
User name
nokiams
DM password
nokiamspass
Allow configuration
Yes
Auto accept all requests
Yes
Hope that helps
Cheers

SAP CRM - Genesys: ICI: Cannot register phone line

Hi,
I am working on SAP CRM to Genesys integration over ICI and I am stuck at the first step. We have Genesys setup and I have followed SAP instruction on configuring SAP CRM in site /people/john.burton/blog/2009/11/11/how-to-implement-computer-telephony-integration-cti-with-the-sap-crm-interaction-center
However I get the following error as seen on ICI trace.
Exception CX_CRM_MCM_EXCEPTION
Exception text General error in the multichannel layer
Message class CRM_IC_APPL_UI_CHMSG
message number 551
message Cannot register phone line
Program name CL_CRM_MCM_SESSION============CP
Include name CL_CRM_MCM_SESSION============CM01P
row number 78
The ICI trace error is
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
- <SOAP-ENV:Body>
- <SOAP-ENV:Fault>
<faultcode>Server</faultcode>
<faultstring>fault. see details</faultstring>
- <detail>
- <IciErrorCodes>
<areaCode>2</areaCode>
<errorCode>15</errorCode>
<errorText>1 is not available</errorText>
<errorRetry>false</errorRetry>
</IciErrorCodes>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Has anyone come across this issue and what would the possibel issue be?
Best Regards
Loy
Edited by: Loy Pereira on Jul 19, 2010 10:29 PM

HI,
We resolved the issue. It was Genesys config. It was defined as user defined seating instead of free seating.
Regards
Loy
Edited by: Loy Pereira on Jul 20, 2010 11:49 AM

Imessage - change registered phone number

How do u change the registered phone number on iMessage on iPhone? It still shows old number even after a reset and the number is grayed out.

There are no registered phone numbers in iMessage on the iPad. I'll assume you must be talking about iPhone. So, try this (on iPhone):
Go to Settings > Phone > My Number and make sure it's your correct phone number. Then, Settings > Messages and turn iMessage off. Turn iPhone off (hold sleep/wake button until the red slider appears on screen, then slide it). Turn iPhone on. Go to Settings > Messages and turn iMessage back on.
Did that help?

How do you change the original registered phone number on the 3GS?

I am using a new sim in the 3Gs but the registered phone number on the device details remains the same so when you use imessaging it displays the old phone number. How do I change this?

Usually phone picks up this information automatically from the SIM.
You can change it from SETTINGS - PHONE - MY NUMBER

Skype to go -- "manage" registered phones in multi...

Similar Messages

Maybe you are looking for