SL3000 + FC-SCSI connection to Solaris 10 x86, Update 6 won't configure

Hi all,
A summary:
1. New SL3000 installed and configured
2. SL3000 is connected/zoned into FC switches presenting itself over FC-SCSI port to Solaris 10 x86 update 6 (fully patched) hosts
3. Appears on fabric like so:
Jul  4 18:48:05 storehost fctl: [ID 517869 kern.warning] WARNING: fp(2)::N_x Port with D_ID=620200, PWWN=500104f000ae7688 reappeared in fabric
Jul  4 18:48:05 storehost scsi: [ID 243001 kern.info]         Target 0x620200: Nonzero peripheral qualifier: Device type=0x8 Peripheral qual=0x14. Attempts to cfgadm -c configure:
[root@storehost:/] $ cfgadm -c configure c4::500104f000ae7688
cfgadm: Library error: failed to create device node: 500104f000ae7688: Invalid argument
Ports on FC switch suggest thousands of "invalid transmitted word" errors per hour - and this is just the SCSI-FC robot control port!
Tried:
a) Reboots
b) luxadm probe
c) cfgadm -c configure -o force_update blah
d) checking zoning over and over
e) entire library reboot
f) entire switch reboot
Thoughts/comments/what could be going wrong?
Thanks all.
z

hi,guys:
did you check you type of connecting of library?
　is it point to point or fc_loop ?
so you need to change fc_loop for fc_swithc 。
best regards

Similar Messages

  • How to setup  internet connection in  Solaris 10 X86

    All
    I have installed Solaris 10 X86 in my intel laptop. I want to setup internet connection in solaris. Can you please provide me some info on this ? I have Comcast broadband cable modem installed at home.
    Thanks
    Murali

    user8473723 wrote:
    All
    I have installed Solaris 10 X86 in my  intel laptop. I want to setup internet connection in solaris. You need to determine whether your NIC is even supported.
    (but you kept that particular information a secret in your forum post)
    If the Ethernet chipset is supported, you then need to install the drivers.
    By the way, very few wireless networking chipsets are supported.

  • Connect to Oracle database from Perl on Solaris x86

    Hi,
    How can I connect to Oracle database using Perl scripts on Solaris x86. It seems that DBD-Oracle Perl module requires Oracle client installed to work. Is there any Oracle client available for Solaris x86? Any one got a workaround? Thanks.
    Angus Lee

    Yes, you absolutely must have some portions of the rdbms installed before you can proceed. If your Solaris x86 machine is only a client, then you can get away with installing just ?/rdbms/mesg and ?/rdbms/lib.
    I have Oracle 7.3.4, 8.0.5, 8.0.6, and 8.1.6 for Intel Solaris 2.6. I don't know if they'll run on Solaris 8 or 9 but I'm trying to upgrade at this very moment. As long as you conform to Oracle developer license, then you may download them from my machine.
    I believe the reason Oracle dropped their Intel Solaris port is probably because Sun went through a period where they themselves dropped their Intel port. They've picked back up and if enough Oracle on Intel Solaris customers scream, then Oracle might pick it back up again too.
    Send me an email if you're interested in the downloads.

  • Error compiling GCC 4.3.1 on Solaris 10 x86 (Update 5)

    I am getting error when building GCC 4.3.1 on Solaris 10 x86.
    Have any of you built GCC 4.3.1 on Sol 10 x86?
    Here's the background:
    $ cat /etc/release
    Solaris 10 5/08 s10x_u5wos_10 X86
    Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 24 March 2008
    $ isainfo -x
    amd64: cx16 mon sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu
    i386: cx16 mon sse3 sse2 sse fxsr mmx cmov sep cx8 tsc fpu
    $ isalist
    amd64 pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
    $ echo $PATH
    /usr/sfw/bin:/usr/local/bin:/usr/X/bin:/etc:/sbin:/usr/sbin:/usr/local/bin:/usr/ccs/bin:/usr/bin
    $ ../gcc-4.3.1/configure program-suffix=-4.3.1 enable-languages=c,c++
    with-mpfr=/usr/local with-gmp=/usr/local
    with-gnu-as with-as=/usr/sfw/bin/gas
    without-gnu-ld with-ld=/usr/ccs/bin/ld
    And here's the failure:
    /usr/local/src/gcc-4.3.1/s10i/./gcc/xgcc
    -B/usr/local/src/gcc-4.3.1/s10i/./gcc/
    -B/usr/local/i386-pc-solaris2.10/bin/
    -B/usr/local/i386-pc-solaris2.10/lib/
    -isystem /usr/local/i386-pc-solaris2.10/include
    -isystem /usr/local/i386-pc-solaris2.10/sys-include
    -O2 -O2 -g -g -O2 -DIN_GCC -W -Wall
    -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
    -Wold-style-definition -isystem ./include -fPIC -g
    -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2
    -D__GCC_FLOAT_NOT_NEEDED -shared
    -nodefaultlibs -Wl,-h,libgcc_s.so.1
    -Wl,-z,text -Wl,-z,defs -Wl,-M,libgcc.map
    -o amd64/libgcc_s.so.1.tmp -g -fkeep-inline-functions
    -m64 -B./ muldi3s.o negdi2s.o lshrdi3s.o ashldi3s.o
    ashrdi3s.o
    cmpdi2s.o ucmpdi2s.o clearcache_s.o enableexecute_stack_s.o
    trampolines.o __main_s.o absvsi2s.o absvdi2s.o addvsi3s.o
    addvdi3s.o subvsi3s.o subvdi3s.o mulvsi3s.o mulvdi3s.o negvsi2s.o
    negvdi2s.o ctorss.o ffssi2s.o ffsdi2s.o clzs.o clzsi2s.o clzdi2s.o
    ctzsi2s.o ctzdi2s.o popcounttab_s.o popcountsi2s.o popcountdi2s.o
    paritysi2s.o paritydi2s.o powisf2s.o powidf2s.o powixf2s.o powitf2s.o
    mulsc3s.o muldc3s.o mulxc3s.o multc3s.o divsc3s.o divdc3s.o
    divxc3s.o divtc3s.o bswapsi2s.o bswapdi2s.o fixunssfsis.o
    fixunsdfsis.o fixunsxfsis.o fixsfdis.o fixdfdis.o fixxfdis.o fixtfdis.o
    fixunssfdis.o fixunsdfdis.o fixunsxfdis.o fixunstfdis.o floatdisfs.o
    floatdidfs.o floatdixfs.o floatditfs.o floatundisfs.o floatundidfs.o
    floatundixfs.o floatunditfs.o divdi3s.o moddi3s.o udivdi3s.o umoddi3s.o
    udivw_sdiv_s.o udivmoddi4s.o unwind-dw2_s.o unwind-dw2-fde_s.o unwind-sjlj_s.o
    gthr-gnat_s.o unwind-c_s.o emutls_s.o -lc && rm -f amd64/libgcc_s.so
    && if [ -f amd64/libgcc_s.so.1 ]; then mv -f amd64/libgcc_s.so.1 amd64/libgcc_s.so.1.backup; else true; fi
    && mv amd64/libgcc_s.so.1.tmp amd64/libgcc_s.so.1
    && ln -s libgcc_s.so.1 amd64/libgcc_s.so
    ld: fatal: unwind table: file /usr/local/src/gcc-4.3.1/s10i/./gcc/amd64/crtend.o: section .eh_frame:
    bad cie version 0: offset 0xfffffd7fffdfb700
    How do I build GCC 4.3.1 on Solaris x86?
    Thanks

    The bootstrap compiler is GCC 3.4.3.
    I tried Sun's assembler (/usr/ccs/bin/as) too and got another error (below)
    I also tried bootstrapping with Sun's Studio 12 compiler but that too failed.
    *$ pkginfo -x SUNWbinutils SMCbinut*
    SMCbinut binutils
    (x86) 2.17
    SUNWbinutils binutils - GNU binutils
    (i386) 11.10.0,REV=2005.01.08.01.09
    *$ whence gcc*
    /usr/sfw/bin/gcc
    *$ gcc -v*
    Reading specs from /usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3/specs
    Configured with: /builds/sfw10-gate/usr/src/cmd/gcc/gcc-3.4.3/configure prefix=/usr/sfw with-as=/usr/sfw/bin/gas with-gnu-as with-ld=/usr/ccs/bin/ld without-gnu-ld enable-languages=c,c++ --enable-shared
    Thread model: posix
    gcc version 3.4.3 (csl-sol210-3_4-branch+sol_rpath)
    The error this time is:
    /big1/usr.local.src/gcc-4.3.1/s10i/./gcc/xgcc -B/big1/usr.local.src/gcc-4.3.1/s10i/./gcc/ -B/usr/local/i386-pc-solaris2.10/bin/ -B/usr/local/i386-pc-solaris2.10/lib/ -isystem /usr/local/i386-pc-solaris2.10/include -isystem /usr/local/i386-pc-solaris2.10/sys-include -g -fkeep-inline-functions -m64 -O2 -O2 -g -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -I. -I. -I../../.././gcc -I../../../../gcc-4.3.1/libgcc -I../../../../gcc-4.3.1/libgcc/. -I../../../../gcc-4.3.1/libgcc/../gcc -I../../../../gcc-4.3.1/libgcc/../include -DHAVE_CC_TLS -o gcov.o -MT gcov.o -MD -MP -MF gcov.dep -DLgcov -c ../../../../gcc-4.3.1/libgcc/../gcc/libgcov.c
    Assembler: libgcov.c
    "/var/tmp//ccYcw90K.s", line 1936 : Syntax error
    Near line: " repz cmpsb"

  • Solaris x86 8 bootdisk

    For some reason my computer fails to boot from scsi cdrom, is there a
    bootdisk for Solaris x86? I have a Tekram DC-390F SCSI adapter and
    Pioneer DR-U24X CDROM-drive.

    Tekram offer a driver for download - this presupposes you have a system already installed and running Solaris so that you can actually install the Tekram driver.
    What Tekram have failed to implement and deliver is the "ITU" version of the driver - Install Time Update is Sun's mechanism \for allowing installation of drivers for devices which need to be bootable duringthe installation of the system - you'll see something like "F4 - use ITU floppy" along the bottom of the install screen.
    Options are: complain to Tekram and ask if they've heard of ITU
    or
    install with IDE CD then add SCSI support after

  • Bundle Patch1 is now available for Solaris (SPARC), Solaris (x86-64), AIX

    [OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
    EM Binaries updated with bundle patch1 are now available on OTN
    OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
    Management Agents for platform::: HP-UX, or HP-UX Itanium
    The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
    http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
    Regards
    Akanksha

    Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
    Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
    The resulting application will be able to connect to databases from Oracle 8.1 onwards.

  • Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful

    Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
    Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
    After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    Gigabyte Technology Co., Ltd. G31M-ES2C
    iTunes 11.3.0.54
    QuickTime not available
    FairPlay 2.6.12
    Apple Application Support 3.0.5
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.2.6
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0012B9F0069DE9C0
    Current user is an administrator.
    The current local date and time is 2014-08-05 01:48:05.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA GeForce 8400 GS 
    **** External Plug-ins Information ****
    No external plug-ins installed.
    The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {14DCBC2B-34CB-431B-8625-1E62D7310533}
    Description:    WAN (PPP/SLIP) Interface
    IP Address:    10.128.133.101
    Subnet Mask:    255.255.255.255
    Default Gateway:    10.128.133.101
    DHCP Enabled:    No
    DHCP Server:  
    Lease Obtained:    Thu Jan 01 06:00:00 1970
    Lease Expires:    Thu Jan 01 06:00:00 1970
    DNS Servers:    8.8.8.8
            156.154.70.1
    Active Connection:    Teletalk
    Connected:    Yes
    Online:        Yes
    Using Modem:    Yes
    Using LAN:    No
    Using Proxy:    No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-08-04 03:23:27.
    **** Device Connectivity Tests ****
    iPodService 11.3.0.54 is currently running.
    iTunesHelper 11.3.0.54 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Hi msahed,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
    iTunes: About the "A secure network connection could not be established" alert
    http://support.apple.com/kb/ts1470
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    I hope this helps.
    -Jason

  • Trying to restore iPhone 4s, and receive "Connection attempt to firmware update server was unsuccessful. The network connection timed out."

    I've tried updating on both my desktop and laptop, neither work. I have the newest version of iTunes as well, so that can't be the problem. When I run diagnostics:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion g7 Notebook PC
    iTunes 11.3.1.2
    QuickTime not available
    FairPlay 2.6.15
    Apple Application Support 3.0.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.2.6
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0038BB880CE6FDE0
    Current user is not an administrator.
    The current local date and time is 2014-09-04 12:48:09.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Advanced Micro Devices, Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    Plug-in Name: Last.fm AudioScrobbler
    Plug-in Loaded: Yes
    Plug-in Version: 4.0.5
    Plug-in File Version: 6.0.5.4
    Plug-in Path: C:\Program Files (x86)\iTunes\Plug-ins\itw_scrobbler.dll
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name: {CE989488-FC81-488B-A970-91D722749820}
    Description: Realtek RTL8188CE 802.11b/g/n WiFi Adapter
    IP Address: 192.168.254.3
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.254.254
    DHCP Enabled: Yes
    DHCP Server: 192.168.254.254
    Lease Obtained: Thu Sep 04 12:18:22 2014
    Lease Expires: Fri Feb 25 02:18:22 2022
    DNS Servers: 192.168.254.254
    Adapter Name: {5E3757D2-481F-4D48-B535-A6A6ACF48517}
    Description: Realtek PCIe FE Family Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 17:00:00 1969
    Lease Expires: Wed Dec 31 17:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-09-04 12:47:39

    Hi christeag,
    The only thing I can identify as an issue is that your Windows Firewall is running and iTunes is not enabled in it, so this may be the source of your issue. Here is an article for you that will help you rectify this situation:
    How to enable iTunes in Windows Vista, Windows 7, and Windows 8 firewall
    http://support.apple.com/kb/HT2553
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Help with evaluation for Solaris x86

    Hello,
    I would like to evaluate Oracle Identity Manager and Access Manager products at the latest version possible -- the host system(s) are Solaris x86 (SunOS .5.10) Unfortunately, I am having a bit of trouble compiling the list of packages/versions to achieve this for this platform. For instance, on the downloads page it appears that OIM is not available for Solaris x86, not even in older versions(?)
    Thank you in advance,
    Scott

    Hi Scott,
    I'm pretty sure that x86 Solaris is not yet certified to run the Identity Management suite. I've been involved in an evaluation process and we ran it all on RedHat Enterprise Server Release 4 Update 5, without too many problems.
    cheers,
    James

  • Unable to regenerate /dev/rmt/0 drivers with cfgadm -c configure on Solaris 10 update 11 (1/13).  How does one do this for SAS HBA StorageTek Autoloader?

    How does one regenerate the /dev/rmt/0 when cfgadm -c configure <device> will not rebuild it?  Have attempted reboot -- -r, with modifing /kernel/drv/st.conf as well as /kernel/drv/sgen.conf.  Running on a SPARC T4-1 Solaris 10 updat3 11, (1/13).

    This has been resolved.  Getting the /etc/driver_aliases set correctly: # update_drv -d -i st; update_drv -d -i sgen; add_drv -m '* 0600 root sys' -i '"scsiclass,01" "scsiclass,08" wa' worked.  Making sure the st and sgen entries are in /etc/name_to_major were needed.  For the Simpana/CommVault WA drivers, in opt/simpana/WA/wa.conf with the name="wa" parent="fp" target=16 lun=0 fc-port-wwn="device's World Wide Number> added for each lun 0 to 7.  Then the touch /reconfigure; reboot worked.  First the c1::rmt/0 tape and c1::scsi/changer/<wwn> med-changer were mapped.  After modifying the minor_perm ('* 0600 root sys') and name_to_major entries, the WA CommValt entries , WA drivers showed up in cfgadm -al as c1::wa0  tape and c1::wa1  med-changer, only recognizable from CommVault.  Also had to update the SAS-2 HBA StoregTek Autoloader driver with patch 145648-05. Solaris 10 update 11 (1/13) comes with 145648-03.  In our particular case, we found cfgadm -al mapped SAS-2 HBA to c1 using the single mini-sas 6gb connector cable, where it mapped to c7 with the four tail connector.

  • Solaris 10 update 9 - live upgrade issues with ZFS

    Hi
    After doing a live upgrade from Solaris 10 update 8 to Solaris 10 update 9 the alternate boot environment I created is no longer bootable.
    I have completed all the pre-upgrade steps like:
    - Installing the latest version of live upgrade from the update 9 ISO.
    - Create and test the new boot environment.
    - Create a sysidcfg file used by the live upgrade that has auto_reg=disable in it.
    There is also no errors while creating the boot environment or even when activating it.
    Here is the error I get:
    SunOS Release 5.10 Version Generic_14489-06 64-bit
    Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
    NOTICE: zfs_parse_bootfs: error 22
    Cannot mount root on altroot/37 fstype zfs
    *panic[cpu0]/thread=fffffffffbc28040: vfs mountroot: cannot mount root*
    ffffffffffbc4a8d0 genunix:main+107 ()
    Skipping system dump - no dump device configured
    Does anyone know how I can fix this?
    Edited by: user12099270 on 02-Feb-2011 04:49

    Found the culprit... *142910-17*... breaks it
    System has findroot enabled GRUB
    Updating GRUB menu default setting
    GRUB menu default setting is unaffected
    Saving existing file </boot/grub/menu.lst> in top level dataset for BE <s10x_u8wos_08a> as <mount-point>//boot/grub/menu.lst.prev.
    File </etc/lu/GRUB_backup_menu> propagation successful
    Successfully deleted entry from GRUB menu
    Validating the contents of the media </admin/x86/Patches/10_x86_Recommended/patches>.
    The media contains 204 software patches that can be added.
    Mounting the BE <s10x_u8wos_08a_Jan2011>.
    Adding patches to the BE <s10x_u8wos_08a_Jan2011>.
    Validating patches...
    Loading patches installed on the system...
    Done!
    Loading patches requested to install.
    Done!
    The following requested patches have packages not installed on the system
    Package SUNWio-tools from directory SUNWio-tools in patch 142910-17 is not installed on the system. Changes for package SUNWio-tools will not be applied to the system.
    Package SUNWzoneu from directory SUNWzoneu in patch 142910-17 is not installed on the system. Changes for package SUNWzoneu will not be applied to the system.
    Package SUNWpsm-ipp from directory SUNWpsm-ipp in patch 142910-17 is not installed on the system. Changes for package SUNWpsm-ipp will not be applied to the system.
    Package SUNWsshdu from directory SUNWsshdu in patch 142910-17 is not installed on the system. Changes for package SUNWsshdu will not be applied to the system.
    Package SUNWsacom from directory SUNWsacom in patch 142910-17 is not installed on the system. Changes for package SUNWsacom will not be applied to the system.
    Package SUNWmdbr from directory SUNWmdbr in patch 142910-17 is not installed on the system. Changes for package SUNWmdbr will not be applied to the system.
    Package SUNWopenssl-commands from directory SUNWopenssl-commands in patch 142910-17 is not installed on the system. Changes for package SUNWopenssl-commands will not be applied to the system.
    Package SUNWsshdr from directory SUNWsshdr in patch 142910-17 is not installed on the system. Changes for package SUNWsshdr will not be applied to the system.
    Package SUNWsshcu from directory SUNWsshcu in patch 142910-17 is not installed on the system. Changes for package SUNWsshcu will not be applied to the system.
    Package SUNWsshu from directory SUNWsshu in patch 142910-17 is not installed on the system. Changes for package SUNWsshu will not be applied to the system.
    Package SUNWgrubS from directory SUNWgrubS in patch 142910-17 is not installed on the system. Changes for package SUNWgrubS will not be applied to the system.
    Package SUNWzoner from directory SUNWzoner in patch 142910-17 is not installed on the system. Changes for package SUNWzoner will not be applied to the system.
    Package SUNWmdb from directory SUNWmdb in patch 142910-17 is not installed on the system. Changes for package SUNWmdb will not be applied to the system.
    Package SUNWpool from directory SUNWpool in patch 142910-17 is not installed on the system. Changes for package SUNWpool will not be applied to the system.
    Package SUNWudfr from directory SUNWudfr in patch 142910-17 is not installed on the system. Changes for package SUNWudfr will not be applied to the system.
    Package SUNWxcu4 from directory SUNWxcu4 in patch 142910-17 is not installed on the system. Changes for package SUNWxcu4 will not be applied to the system.
    Package SUNWarc from directory SUNWarc in patch 142910-17 is not installed on the system. Changes for package SUNWarc will not be applied to the system.
    Package SUNWtftp from directory SUNWtftp in patch 142910-17 is not installed on the system. Changes for package SUNWtftp will not be applied to the system.
    Package SUNWaccu from directory SUNWaccu in patch 142910-17 is not installed on the system. Changes for package SUNWaccu will not be applied to the system.
    Package SUNWppm from directory SUNWppm in patch 142910-17 is not installed on the system. Changes for package SUNWppm will not be applied to the system.
    Package SUNWtoo from directory SUNWtoo in patch 142910-17 is not installed on the system. Changes for package SUNWtoo will not be applied to the system.
    Package SUNWcpc from directory SUNWcpc.i in patch 142910-17 is not installed on the system. Changes for package SUNWcpc will not be applied to the system.
    Package SUNWftdur from directory SUNWftdur in patch 142910-17 is not installed on the system. Changes for package SUNWftdur will not be applied to the system.
    Package SUNWypr from directory SUNWypr in patch 142910-17 is not installed on the system. Changes for package SUNWypr will not be applied to the system.
    Package SUNWlxr from directory SUNWlxr in patch 142910-17 is not installed on the system. Changes for package SUNWlxr will not be applied to the system.
    Package SUNWdcar from directory SUNWdcar in patch 142910-17 is not installed on the system. Changes for package SUNWdcar will not be applied to the system.
    Package SUNWnfssu from directory SUNWnfssu in patch 142910-17 is not installed on the system. Changes for package SUNWnfssu will not be applied to the system.
    Package SUNWpcmem from directory SUNWpcmem in patch 142910-17 is not installed on the system. Changes for package SUNWpcmem will not be applied to the system.
    Package SUNWlxu from directory SUNWlxu in patch 142910-17 is not installed on the system. Changes for package SUNWlxu will not be applied to the system.
    Package SUNWxcu6 from directory SUNWxcu6 in patch 142910-17 is not installed on the system. Changes for package SUNWxcu6 will not be applied to the system.
    Package SUNWpcmci from directory SUNWpcmci in patch 142910-17 is not installed on the system. Changes for package SUNWpcmci will not be applied to the system.
    Package SUNWarcr from directory SUNWarcr in patch 142910-17 is not installed on the system. Changes for package SUNWarcr will not be applied to the system.
    Package SUNWscpu from directory SUNWscpu in patch 142910-17 is not installed on the system. Changes for package SUNWscpu will not be applied to the system.
    Package SUNWcpcu from directory SUNWcpcu in patch 142910-17 is not installed on the system. Changes for package SUNWcpcu will not be applied to the system.
    Package SUNWopenssl-include from directory SUNWopenssl-include in patch 142910-17 is not installed on the system. Changes for package SUNWopenssl-include will not be applied to the system.
    Package SUNWdtrp from directory SUNWdtrp in patch 142910-17 is not installed on the system. Changes for package SUNWdtrp will not be applied to the system.
    Package SUNWhermon from directory SUNWhermon in patch 142910-17 is not installed on the system. Changes for package SUNWhermon will not be applied to the system.
    Package SUNWpsm-lpd from directory SUNWpsm-lpd in patch 142910-17 is not installed on the system. Changes for package SUNWpsm-lpd will not be applied to the system.
    Package SUNWdtrc from directory SUNWdtrc in patch 142910-17 is not installed on the system. Changes for package SUNWdtrc will not be applied to the system.
    Package SUNWhea from directory SUNWhea in patch 142910-17 is not installed on the system. Changes for package SUNWhea will not be applied to the system.
    Package SUNW1394 from directory SUNW1394 in patch 142910-17 is not installed on the system. Changes for package SUNW1394 will not be applied to the system.
    Package SUNWrds from directory SUNWrds in patch 142910-17 is not installed on the system. Changes for package SUNWrds will not be applied to the system.
    Package SUNWnfsskr from directory SUNWnfsskr in patch 142910-17 is not installed on the system. Changes for package SUNWnfsskr will not be applied to the system.
    Package SUNWudf from directory SUNWudf in patch 142910-17 is not installed on the system. Changes for package SUNWudf will not be applied to the system.
    Package SUNWixgb from directory SUNWixgb in patch 142910-17 is not installed on the system. Changes for package SUNWixgb will not be applied to the system.
    Checking patches that you specified for installation.
    Done!
    Approved patches will be installed in this order:
    142910-17
    Checking installed patches...
    Executing prepatch script...
    Installing patch packages...
    Patch 142910-17 has been successfully installed.
    See /a/var/sadm/patch/142910-17/log for details
    Executing postpatch script...
    Creating GRUB menu in /a
    Installing grub on /dev/rdsk/c2t0d0s0
    stage1 written to partition 0 sector 0 (abs 16065)
    stage2 written to partition 0, 273 sectors starting at 50 (abs 16115)
    Patch packages installed:
    BRCMbnx
    SUNWaac
    SUNWahci
    SUNWamd8111s
    SUNWcakr
    SUNWckr
    SUNWcry
    SUNWcryr
    SUNWcsd
    SUNWcsl
    SUNWcslr
    SUNWcsr
    SUNWcsu
    SUNWesu
    SUNWfmd
    SUNWfmdr
    SUNWgrub
    SUNWhxge
    SUNWib
    SUNWigb
    SUNWintgige
    SUNWipoib
    SUNWixgbe
    SUNWmdr
    SUNWmegasas
    SUNWmptsas
    SUNWmrsas
    SUNWmv88sx
    SUNWnfsckr
    SUNWnfscr
    SUNWnfscu
    SUNWnge
    SUNWnisu
    SUNWntxn
    SUNWnv-sata
    SUNWnxge
    SUNWopenssl-libraries
    SUNWos86r
    SUNWpapi
    SUNWpcu
    SUNWpiclu
    SUNWpsdcr
    SUNWpsdir
    SUNWpsu
    SUNWrge
    SUNWrpcib
    SUNWrsgk
    SUNWses
    SUNWsmapi
    SUNWsndmr
    SUNWsndmu
    SUNWtavor
    SUNWudapltu
    SUNWusb
    SUNWxge
    SUNWxvmpv
    SUNWzfskr
    SUNWzfsr
    SUNWzfsu
    PBE GRUB has no capability information.
    PBE GRUB has no versioning information.
    ABE GRUB is newer than PBE GRUB. Updating GRUB.
    GRUB update was successfull.
    Unmounting the BE <s10x_u8wos_08a_Jan2011>.
    The patch add to the BE <s10x_u8wos_08a_Jan2011> completed.
    Still need to know how to resolve it though...

  • Solaris x86 with card on-board

    Hi all,
    I got a problem when installing Solaris9 x86 on ibm NetVista Machine.
    I have installed 2 other machines with separated network card sucessfully. I can configure to connecto to my LAN network.
    But when install on 2 ibm NetVista machines (which include onboard network card ), It is fail to be configured to connect to the network in both following cases:
    Case 1: I choose proper driver as Sun suggest for Intel VE Pro(R) 10/100 : iprb. And the Solaris detect successfully. I checked by "ifconfig -a" and saw the network card active on "iprb0".
    Next, I following correct instructions to configure the network card to connect to the LAN. But when i ping IP (9.187.186.18) to other computer in our same subnet LAN,
    The system display eg: "No anwer from 9.187.186.18"
    I run the "snoop" command to view broadcasr ARP in an other terminal. The snoop terminal displays ARP signal boradcasting from the Solaris. However, it can nerver get ARPs from other computer in LAN.
    Case 2: I add 3COM network driver to the solaris ( onboard card is no loger used ). The system can auto-detected this card and i can configure to connect to the network. The problem remain unchange.
    Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular configuarion for on-board network card. ???
    Can any boy help me to solve this problem ??
    Best regards,
    Thang,
    Vietsoftware Developer

    However, it can nerver get ARPs from other computer in LAN.Are you perhaps running "snoop" on a box different from the one that you're trying to ping, and are you using
    a switched ethernet? In that case it would be OK if you only see the ARP broadcast, because the ping target
    box will send the ARP reply directly to the MAC of the requesting station (i.e. there's no ARP broadcast reply),
    and an ethernet switch will send the ARP reply directly to the port where the station with the given destination
    MAC is connected - no other port should see the reply.
    If you're trying to ping 9.187.186.18 from the new Solaris x86 box, try to run snoop on the 9.187.186.18
    system. 9.187.186.18 should see the ARP broadcast from the LAN, and the 9.187.186.18 box should list the
    ARP response it sends back to the LAN.
    Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular
    configuarion for on-board network card. ???I guess the interrupt handler for the NIC is not working, so the Solaris x86 sees no incomming packets.
    See the "troubleshooting" section on the following page:
    http://solaris-x86.org/documents/tutorials/rtls.mhtml

  • How to setup Internet connection in Solaris 10

    Hi All,
    I recently installed Solaris 10 in my laptop as a guest OS which is having Host OS of Windows 7 by using Virtual Box.
    I shared all my hardwares and network connection and still I cannot use the internet connection in my guest OS (Solaris 10).
    I'm new to this could anyone please provide steps to set up internet connection in Solaris 10???
    Thanks,
    Mahesh

    user8473723 wrote:
    All
    I have installed Solaris 10 X86 in my  intel laptop. I want to setup internet connection in solaris. You need to determine whether your NIC is even supported.
    (but you kept that particular information a secret in your forum post)
    If the Ethernet chipset is supported, you then need to install the drivers.
    By the way, very few wireless networking chipsets are supported.

  • LSI Megaraid 9260/9261 driver issue on Solaris x86-64

    We have several x4170 M2 machines with either the LSI 9260 or 9261 megaraid cards (same driver) where SUN uses the "SUNWmr_sas" driver, and you can download the latest driver from LSI website as "mr_sas". Using SUN Solaris 10 update 9 with latestl patches, x86 64-bit version .
    Created two RAID arrays in the card BIOS (RAID1 using 2 disks and a RAID5 using 6 disks). Each disk is a 146GB 10k RPM SAS drive. The firmware on the card is the latest version from April 2011.
    A copy from the RAID1 array to the RAID5 array yields a measly 5MB/s transfer speed. Tried both drivers with the same result. Tried all sorts of RAID array settings with no luck.
    Installed Ubuntu Linux 10.04 LTS 64-bit version without touching the RAID array settings and the transfer speed jumped to over 100 MB/s (expected results).
    Network copies to a single array and local copies within a single array perform as expected. Only the copy from one array to the other seems to be effected.
    This leads me to believe the LSI driver for Solaris is at fault. Any thoughts? Anyone else noticing this poor performance?

    Hi.
    Read thread:
    X4x70 (M1) with extremely slow disk I/O
    Try workaround the problem by adding the following line to /etc/system and then reboot:
    set idle_cpu_no_deep_c = 1
    Regards.

  • Where is old Solaris 10 update!!

    Hi Everyone,
    I have a valid contract and can open Oracle Support tickets but I'm not able to download Solaris 10 update 8?
    I searched in the forum and some people are saying that I have to contact my local support to get the old update!
    is this true? Why I can't just download it online !?
    This is also for patches, I can't download old recommend cluster patches.

    Hi.
    Select seach criteria:
    Product - Solaris 10 Operating system
    Type - Patch Set
    Seach results:
    Patch Solaris 10 5/08 SPARC Bundle: Solaris 10 05/08 (Update 5) Patch Bundle for Solaris 10 SPARC (Solaris Operating System patches only)
    Patch Solaris 10 5/08 x86 Bundle: Solaris 10 05/08 (Update 5) Patch Bundle for Solaris 10 x86 (Solaris Operating System patches only)
    Or seach by patch name:
    Solaris 10 5/08 SPARC Bundle
    Solaris 10 5/08 x86 Bundle
    It's realy Solaris Media, not patches to Solaris.
    Regards.

Maybe you are looking for