[SLD] change SWC production status

Hello,
I created a SWC in SLD with production status planned, but I'm not able to change this status. The documentation has not been extended since this Production State in SWCV SLD WAS 7.0 year.
Is the production status used for something? Which effect got every status? Got anyone experiences with this?
thanks
greetz
chris
Message was edited by:
        Christian Riekenberg

Thanks a lot.
I don't like fields that have no use but just confusing the user
greetz
chris

Similar Messages

  • R12-Please let me know how to change the product status

    Hi,
    We are looking to change the "INV" product status from "shared" to "Fully installed".Please let me know,how to change the same.

    Hi,
    Did you verify the current status of the product?
    Note: 443699.1 - How to check if certain Oracle Applications product/module is implemented?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443699.1
    You can change the status of the product from shared to installed from OAM > License Manager. Once the product is installed, run the following via adadmin for this product (optional but recommended).
    - Generate message files
    - Generate forms files
    - Generate report files
    Regards,
    Hussein

  • Impact of Field Status change in production

    Hello Experts,
    While doing MB1c intial stock upload i got an error that "Fld selection for mvmt type 561/acct 230000 differs for Ext GA amount in LC(023).
    I found that the feild Ext GA amount in LC is made optional for mvnt type 561.
    For gl 230000 the fsg is maintained as ZPL1 and that field is supressed.
    But the GL 230000 is a balance sheet account so i think that we have to maintain the field status group as ZBS1.
    For ZBS1 the field Ext GA amount in LC is optional only.
    In production also for GL 230000 the FSG is maintained as ZPL1.
    If we change the FSG from ZPL1 to ZBS1 in productin system what will be the impact.
    Is this is the correct process or do we need to change the Field status for GL or Mvn=mt type.
    Please guide me with correct solution.
    Thanks in advance,
    Satya

    Hello Atif,
    There are some other differences are also there between ZPL1 and ZBS1.
    Can you please let me know the solution for the below error
    "Fld selection for mvmt type561/acct 230000 differs in Ext GA amount in LC (023)"
    Am getting this error while am doing MB1c intial stock uplaod
    Thanks,
    Satya

  • Mass change on production order (assembly type) to put deletion flag status

    Dear all,
    I've make a mass change on production orders to settle the status DLFL through the Tcode CO78.
    Some of the production orders  are "assembly order" type. Those could not be up-dated with the DLFL because there are linked to customer order. The customers orders are closed.
    What can I do to change the status for this kind of production orders. It is necessary for me to be able to put the DLFL status in order to improve the process of production closure done each month.

    Hi kiran 
    Thanks for the response. As I cannot put deletion indicator on the Assembly order directly, Do we have to put deletion indicator on the sales order item?. If so, Can we put a deletion indicator after the sales order was delivered and invoiced. What exactly have you guys done to put deletion flag on the production order.

  • Mass change of Production Orders status from TECO to CLSD

    Hi All,
    I want to do mass change of Production Orders status from TECO to CLSD. could you tell me is there any t-code by which i can mass change Production orders status from TECO to CLSD. I want Production Orders to be closed, so that further confirmation shouldn't be done for these Production Orders. please let me know the solution.
    Regards,
    Ram

    Hi Girish/Dogboy,
    I can set the status 'Complete' if Order is fully confirmed/fully delivered. When ever i run COHV for partially confirmed/delivered Orders, i get error log saying 'Balance of ORD................ is not zero'. Actually we have lot of Production Orders, where there may be Production Orders released only, partially confirmed etc. so i want them to be closed once for all.
    Regards,
    Ram

  • Apps 11i change product status code from "Installed" to "Shared"

    Hi All,
    is it possible to change product status code from "Installed" to "Shared"?
    Reg
    chirag Patel

    Why would you need to do this?
    Generally, it is not possible (not supported). However, you can do that for certain modules (like HR/Payroll). Refer to the following note for more details:
    Note: 461063.1 - HR and Financials Applications Installed as Full Instead of Shared
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=461063.1
    Note: 461063.1 - Changing Oracle Human Resources Installation from FULL HR/FULL Payroll Install to SHARED HR/SHARED Payroll Install
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=461063.1

  • How track changes in production order which is already Read PP master data

    Hi Gurus,
    Due to some unavoidable reason my client has to do Read PP master data time and again, now my client having a requirement that want to see what has been changes in Production Order.
    We already created 1 report for that which tracks whatever has been changed in Production Order but having a constraint in it.  That It could not be able to distinguish to which order READ PP MASTER DATA done.
    So my query is how to map that in report. As sytem Status directly changed to CRTD phase.
    Any table which can track the changes once the order been through with READ PP MASTER DATA?
    As there are huge number of Production Order so we can go and open each order to see the Status changes in each and every order.
    Hope to get a reply soon.
    Regards,
    Sap User

    Hi,
    A suggestion:
    Change the specification as, log changes at each save instead of Read PP Master Data, as the changes would become effective only upon save. So if this is acceptable then 2 options, 1. Go with OCM feature or 2. Refer note - 390635
    Revert if you face any issues.
    Regards,
    Vivek

  • Block Operation Number Change in Production order

    hello,
    How can i block the operation number change in production order if the operation status is CNF...?
    ie either disable the operation number cell or disable the entire row in the production order.
    rgrds
    Krishna.

    hi prashob
    i can't disable the column, as user need to insert operations in between
    AP, 
    I will check for this...
    regards
    Krishna

  • Availability of products based on product status

    Hello
    I have the following requirement that needs to be implemented in CRM 7.0.
    "Based on product statuses, we'd like to stipulate which product can be used for new orders and which products can be used only for change orders."
    For example let's say product X was created on Jan 1 2009.  Quotes/Sales orders were created for this product.  Buit in June 2009, this product should only be available for change orders.  It should not be available for new quotes/sales orders.
    I've looked through product statuses and read several posts on this forum. But I didn't quite understand what thought process I should have to implement this.
    Any guidance would be greatly appreciated.
    Thanks

    Thanks for your reply.  I see what you're saying.  The product status would still be active.  Otherwise the product won't be available for use at all.
    If that is the case, then which attribute of the product could I use/should I use, to prevent the product from being used on new orders (but usable on change orders)?
    Thanks

  • R12: Is there a Public API to change the LifeCycle Status / Item Status ?

    Hi,
    R12.1.3 Advance Product Catalog :
    Is there any Public API to change the LifeCycle Status / Item Status from one phase to
    next phase specific to Product Information Management ?
    Thanks,

    Hi;
    All APIs are listed in Oracle Integration Repository
    http://irep.oracle.com/index.html
    http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e10652/toc.htm
    API User Notes - HTML Format [ID 236937.1]
    R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
    Oracle Trading Community Architecture API User Notes, June 2003 [ID 241320.1]
    Technical Uses of Customer Interface and TCA-API [ID 269121.1]
    Pelase also check below:
    Api's in EBS
    Re: Api's in EBS
    http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
    API
    Fixed Asset API
    List of API
    Re: List of APIs
    Oracle Common Application Components API Reference Guide
    download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
    List of APIs and open interface R12
    Re: List of APIs and open interface R12
    Regard
    Helios

  • Sales order as complete and change the delivery status.

    Hello All,
    We  produces an order but then the customer calls and does not want the material so we in turn will scrap the material against the production order using transaction MB1A mvmt type 951 E. 
    Since the material were scrapped and no material were shipped against the sales order, the sales order u201Coverall statusu201D remains open and the delivery status is u201Cnot deliveredu201D.
    To close the order  we u201CRejected line itemu201D and moved on.
    I would like to know if there is another way we can set the sales order as complete and change the delivery status. 
    Regards
    Amit

    Hello,
    you can use the status profile for the same. but a better way would still be to use the rejection reasons . the rejectionr reasons are very well integrated with the document flow as well as transfer of requreiemnts to Production
    so a best practise would be to use rejection reason
    hope this helps
    Thanks
    akasha

  • OIM 9.1 DB Recon Changes Locked Account status in OIM back to Provisioned

    Hi,
    I have a scheduled task that runs the OIM DBAccessReconTask but am seeing some unexpected behavior. Here are the steps to produce the error:
    1. Provision a DB account to a user in OIM (this creates an account in the target database and the account shows in the user's resource profile with a status of "Provisioned")
    2. Disable the DB account in OIM from the User's Resource profile screen (this successfully disables the account in the database and changes the account status to "Disabled")
    3. Run the DBAccessReconTask
    4. After the DBAccessRecon task completes the status of the DB account in the database is still disabled but in OIM on the user's resource profile screen it is marked as "Provisioned"
    I did not expect this to be changed to provisioned in OIM since it is disabled in the database. Has anyone seen similar issues when running the DBAccessReconTask or know a way to fix this?

    Hi Suren,
    Thanks for the reply. Originally I thought your solution would work but after analyzing it closer there is a more fundamental problem we are having with the DBReconTask. We only want the reconciliation to take place going from OIM to the database and not vice versa (i.e. changes to an account in OIM should be pushed to the database but not from the database to OIM). However, currently if a change is made in the database (a role is added, the profile is changed, etc...) and the DBReconTask is run then it will be updated in OIM. Do you know how this can be achieved? These are the properties we currently use when creating the task:
    Properties props = new Properties();
    props.put("Target System Login Recon - Resource Object name:", ro.getName());
    props.put("Target System User Recon - Resource Object name:", ro.getName());
    props.put("Trusted Source Recon - Resource Object name:", "Xellerate User");
    props.put("Server", itResource.getName());
    props.put("Record Size", "ALL");
    props.put("isTrusted", "NO");
    props.put("DBName", "nodata");
    props.put("ExcludeSystemUsers", "nodata");
    props.put("ReconcileLockedUser", "YES");
    props.put("Login Name", "nodata");

  • Change the transaction status when creating a follow up activity

    Hello All
    We need to change the activity status if a follow up document is created from. E.g. If an activity is created type 001  then a follow-up activity type 003 as a follow up document from 001 the system automatically changes the activity status from open to in process. I need detailed steps regarding how to reach this
    Regards
    Jacopo

    See if you can "exploit" CRM_COPY_BADI and function modules CRM_STATUS_CHANGE_EXTERN to change the User status or CRM_STATUS_CHANGE_INTERN for System status.

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • Assembly to order: change in sales order with change in Production order

    I want to activate change in the sales order data when a production order(which is created w.r.t the sales order) data is changed (Strategy 82 used); I have de-activated "No Update" for the corresponding requirement class 201; also the material for which SO created ,is not a part of any Delivery group.
    But when I am changing the production order (date/qty.), SO isn't getting updated accoringly.
    Please tell me the reason why it isn't happening!!

    Hi
    The sales order requirement can be made as the production order receipt once you save the order in the system.
    so it is possible to change the receipt according to the sales order reqmt if any changes made in the sales order,
    in every entry or changes in the sales order ( if you use the stategy 82) . in back end system explode the BOM and the create the production order as per the order reqmt,
    even while you do the changes mad in the sales and save that time sytem re explode the BOM once again and change the production order qty.
    but if you change the production order , system not re run or explode the BOM , Routing . such setting is not made in the system . so obviously updation will not happen for the sales order .
    Edited by: raj on Jun 9, 2009 11:22 AM

Maybe you are looking for