SLD - Define a new Product / SC

Hello everybody,
anyone know, how to define a new product which has different Software Units among them? (E.g. Product: SAP ERP 2004)
When i define a new product and attach SCs to this product they will all get stored under the same Software Unit. I dont get the seperation like in product SAP ERP 2004 done.
Any idea how to get it done?
System: WAS 6.40 SPS14
regards,
Markus

Thanks to Both SG and Muthu,
Are you mentioning about the IMG activity,
Define the Objects in backbend system ?
It is already in configured as we are using ECC the target system is set as R/3 system.
Could you please confirm.
I have performed all the steps which you have mentioned and I have run the extract few times and the status is green.
Still I am not able to see the description of the Product category in SRM and not able to create a SC with new Product category.
Regards,
Pradeep

Similar Messages

  • Migrate product to another new product

    Hi,
    I have the following situation on NWDI CE 7.11:
    - Product "xy" version 0.1 of "vendor.com"
      -SC1 (version 0.1) developed with some dependencies to other SCs (e.g. WD SCs)
      -SC2 (version 0.1) developed with some dependencies to other SCs
    Now I want to create a new product as a new version of product "xy" and create an according track to start further developent on this new track.
    - Product "abc" version 1.0 of "vendor.com"
      -SC1 (version 1.0) developed with some dependencies
      -SC2 (version 1.0) developed with some dependencies
    Hope can I do this? Are there any tutorials? I think the problem is to change the product name and version at the same time and migrate the developed SCs with new version numbers...
    Thanks ahead,
    Bernd

    So you mean I have to define a new product first. After that I should create new SCs in the SLD and assign them to the product. There is no copy mechanism where I can change version numbers and names?
    When I create the new SCs there are different options:
    - Create new version for an existing SC
    - Copy my SC with dependencies to a new Version
    Where is the difference?
    After that I could create a new development track and add new newly created SCs? The other required SCs are added automaticaly?
    Thanks ahead!
    Bernd

  • Defining New product type in CRM 5.0

    Hi Guys,
    Can anyone tell me how to define new Product Type for CRM(Standalone Products) like material, Service, warranty, financing .
    Thanks in advance
    amar

    Hi Kovela,
    I haven't come across any IMG activity which allows to create a new product type in CRM. Why do you want to have a separate product type. It is not so easy to create a product type because you also need to create additional attributes and set types. In general all existing product types are stored to table COMC_PR_TYPE. Also you need to maintain a separate structure (COMT_PROD_MAT_MAINTAIN_API) for each product type.
    Why don;t you enhance the existing product type by creating new attributes and set types as per your requirement.
    <b>Do not forget to reward if it helps,
    </b>
    Regards,
    Paul Kondaveeti

  • How to make the new products on SLD to show on the PI?

    We have a PI7.0 connected to a remote centralized SLD.
    Whenever there is a new product on the SLD , we want to have it show up at the PI7.0.
    We do not know how to make it happen.
    What we know is (perhaps) once a new product is installed on the PI, SE70 will inform SLD about this.
    Please help. Thanks!

    Hi Ashley,
      As you are mentioning that SLD has been connected to PI7.0 No special mechanism is requred to access products .Every thing that is created in SLD will be in synchronised automaticaly and you will be able to see them in IR(ex.Import ing sofware compnent from SLd).
    Thanks,
    Ram.

  • Creation of new product hierarchy and products in SAP CRM.

    Dear all,
    please help with resolving of following issue:
    In CRM system base hierarchies were replicated from R/3 system with materials. Current requirement is to create new materials in CRM directly (as standalone scenario). As far as I understand, I have to create new hierarchy with required list of set types in order to allow creation of products in CRM directly (product type = material). Can anybody describe changes in the system step by step, what should be changed and where?
    As a result I need to have a possibility to create products in CRM directly for sales scenario processing.
    Thank you in advance!

    Hi Jorge,
    thank you so much for your reply!
    Here what I tried to do:
    1. I created new category in hierarchy R3PRODSTYP, added 3 set types: COMM_PR_MAT, COMM_PR_SHTEXT, COMM_PR_UNIT as basic set types.
    2. In the SPRO - Cross-Application Components - SAP Product - Settings for Product Type - Number Assignment - Define Number Ranges for the Product Type "Material" I found my new product category is unassigned, so I assigned it to the "CRM Products" group.
    3. Farther I tried to create a new product for created category in CRM Web UI, but was not able to find it in the Base category search field. All categories correctly displayed from R3PRODSTYP, but my new category is absent. What can be the reason of category absence? Btw, it cannot be found even when I try to display whole hierarchy in Web UI, however, in SAP GUI, it can be seen via tcode comm_hierarchy.
    Here is the setup of hierarchies in the system:
    I have no idea how to check #3 "Ensure the hierarchy is assigned to CRM application".
    Can you please suggest, what should be changed in addition? Thank you!

  • Creating new track - software catalog new product not showing up - Help!!!

    Hi,
    Creating a new track for custom development.
    A new product has been added in the software catalog in SLD.
    SLD and NWDI (netweaver 04) are on the same system.
    The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
    Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
    Thanks in advance 
    Regards, Neeta

    Thanks - This did the trick. I have awarded points!!!!
    Regards, Neeta

  • Use old product number for new product.

    Dear all,
    I have to manage the following case.
    From a defined date the engineering releases a new product that will substitute an old product.
    The marketing doesnu2019t want to change material number and would you like to use the old product number also for new product.
    This solution has a great impact for planning because there is not possible to distinguish the old product stock from new product stock.
    Could you help me?
    Regards
    Flavia Borselli

    Hi,
    I think one opption is discontinuation that was invited for such cases I thnk. You can set the new part number as the follow-up material of the old one - in this case planning will run smoothly hopefully...
    That would mean that they should use new part number but there would be some connection between the new and old one...
    Split valuation is another tool to make difference between batches from different origins when the material number is the same. But you wrote batch management is not active...
    If you use WM you can store the new & old goods separatly but I wouldn't prefer such solutions...
    BR
    Csaba

  • How to add new product version in Mopz?

    Hi,
    Can anyone guide me how to add a new product version in maintenance optimizer?
    I am going to get the stack file of Netweaver gateway 7.4, but without the product version, I could not proceed.
    Thanks in advanced.

    Dear Friend,
    1.    Maintain Solution Manager information in the system’s SLD data supplier. In case of ABAP system using tcode RZ70 and incase of Java system using the Visual Administrator/NWA(for NW 7.3 onwards)àSLD data Supplier.
    2.    Once the data supplier jobs gets executed you system will appear under SMSY under Server, Database and (Technical System in case of Java systems).
    The ‘Data Source’ should be LMDB.Note: Please don’t changes to the system in SMSY
    3)Execute transaction code ‘LMDB’ in your solution manager system.Select Technical system(Give Application server ABAP and SID of the Server)
    4)Click on Edit and select Software
    Click ‘Add’ and it will show Product Version screen  and  search for your installed product.
    5)Select your relevant usage types and once done choose ‘Close’ and save the data.
    6)Assignment of Product System :
    Click ‘Assign to Product System’
    Now Product system does not exist, hence we have to create one. Choose ‘Create’ and confirm
    7)After that complete Landscape Verification check..it should be green.
    8)Go to Solman_setup and complete Managed system configuration.
    after that Create Maintainence transaction and generate stack file.
    Before doing all activities make sure that ST-PI and ST-A/PI Patched should be applied in Managed server(NW 7.4) and run rtcctoll.
    Regards
    Maruthi V

  • SLD Configuration to New Technical System is failed.

    When iam trying to create a new technical system in sld after selecting the product i got this error.Please help me on this iam new to Portal SLD.
    CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_InstalledProduct.CollectionID="24457af4-fdf7-e5f4-63ac-00f98079457a",ProductIdentifyingNumber="01200615320900001296",ProductName="SAP ERP",ProductVendor="sap.com",ProductVersion="2005",SystemID="STV.SystemNumber.0020620473.SystemHome.stravist"

    Hi,
    As per the error - the technical system already exists in the SLD. You could check in the list of existing technical systems if system STV already exists. If you want, use the same entry or else delete it first and try registering the system.
    Also, why are you recreating the system manually now? Was there a restore, system copy or any other activity?
    Manually creating the is not recommended. Auto register the system to SLD via RZ70 for ABAP or SLD Data supplier in Visual Admin for Java systems.
    Regards,
    Srikishan

  • Error Message for new production order type

    I have created a new production order type and gone through all the configuration requirements that I'm aware of.  In testing this new order type, I get an error message in transacion CO02 when selecting the printer icon. The error is as follows:
    No reference document type defined for order type ZRWK
    Message no. CO179
    ZRWK being the new order type.
    I've searched through many posts and found nothing relating to this message.  Hopefully someone has encounted this before.
    I'm sure I've missed something, but can't pinpoint what it is.
    Help is greatly appreciated.

    Bob, did you check your print parameters?..Maybe you don't have your sap forms..You can check it with Tx. COPI
    The path is Print - Print Settings - Configuration Menu.
    Diego

  • New products reporting

    I have this requirement for loding budget data for new products . The issue is that at the moment the business does not know what would be the Product id associated with such new products . They want to put them under a dummyid and later when the product id is defined , they want to move all the data associated from the dummy id to this new product id.
    Please let me know if this is feasible in BW , if so what is the solution.
    Thanks

    Hi,
    Try this ,
    take <i>0MATERIAL</i> info object as Navigational attribute for the info object <i>dummyid</i>. So when ever the <i>dummyid</i> get the orginal Material number then the Navigational attribute <i>0MATERIAL</i> has to filled with that value.
    With rgds,
    Anil Kumar Sharma .P

  • I am having trouble with my Mac Mini's ethernet connection.   Defining a new network interface shows no ethernet adaptor.  Reloading SL from DVD repaired.  But SL update lost ethernet again.  Will Lion Fix?

    I am having trouble with my mac mini ethernet.  It had been working for weeks after an update to SL 10.6.8.
    Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
    But yesterday, after a power up.  my ethernet was not working again. I tried this old trick to repair it, but the interface choices
    listed for '+' a new service did not include Ethernet any more.  And the Utilities->System Profiler->Ethernet Cards shows
    no ethernet available.
    As a last ditch effort i reloaded my original SL from DVD.  (I think it was version 10.6.4 but i could be mistaken on the version).
    The ethernet worked!  But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
    So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
    Now the Ethernet is not working again.  I see the same symptoms as before with the Ethernet seeming not installed.
    Is this a problem seen by others?
    Would going to Lion fix the problem?
    Could AirPort actually be the culprit and not SL?
    If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

    Have you reset the SMC?
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

  • Strategy 82----How to stop creation of New Production Order

    Hi All,
    My client is facing problem with the material which having Strategy 82- Assembly to Order,  As when they make a sales order  , w,.r.t that a Production order is made automatically by system,. User complete the production process and deliver this material , now when ever the Sales user change "Credit Block: in that particular sales order again a New production order created to this sales order, How to control his creation of new Production order? As if new production Order create it brakes the link between Sales order and the previous Production order which is already in delivered status.
    Your Prompt response will be appreciated.

    HI ,
    I am closing this thread , as I know how to got a control on trhis, As of behaviour, startegy 82 says every time u change in sales order it will create a new Production order during saving, if the previous order is not been in ONLY REL status.   So the only option to control this is in S.O ,change the Item category to "CN" i.e NO MRP when if required there has been any modification to S .O.  In std SAP system item catageory has to be congiured , in SPRO SALES we can do the necessary settings.

  • How can I modify an incorrect mailing address on my AppleCare Protection Plan certificate? After I registered a new product with AppleCare I realised that I'd entered the wrong postal address and I need to update it to show my correct address.

    I need to modify an incorrect mailing address on my AppleCare Protection Plan certificate. After I registered a new product with AppleCare I realised that I'd entered the wrong postal address during the registration process and now I need to update my details to show my correct address. I've been trying for several hours to find a way to modify my address on the AppleCare site, with no success. Any help/advice would be greatly appreciated!

    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57
    Apple Contact USA
    http://www.apple.com/contact/

  • Goodnight. as you know apple has evolved considerably until today but there are people who do not have ability to buy new products. in my case I would like to know why the apple do not let the iphone 3g update to iOS 4.3 as are several applications that c

    goodnight. as you know apple has evolved considerably until today but there are people who do not have ability to buy new products. in my case I would like to know why the apple do not let the iphone 3g update to iOS 4.3 as are several applications that can not put on my iphone 3g due to this reason. Why does not Apple make a repository with applications for ios 4.2.1? or else do not work in an update to ios 4.3 on iphone 3g?

    This has nothing to do with Apple, as Apple does not make the apps.
    This is the decision of the app maker.
    Contact those app makers and ask them why they do this.

Maybe you are looking for