Sluggish Wireless Mighty Mouse

Has anyone had trouble with their Mighty Mouse (wireless) become very sluggish after computer awakes from a sleep mode. My symptoms seem to get so bad after that after a day or so I have to restart my computer and then the mouse once again moves freely only to slow down again after about half a day. I have closed as many programs as I could with no improvement. This reminds me of my horrible days when I had a Windows PC and it would slow down too.

This is the serial number to the wireless mighty mouse that I have KY718061ZXXKA. I have tried just about everything. I still have my original wireless mouse that came with my imac and it works fine. Most of the time I find it back in use after my wife has become frustrated with the MM. I have already tried deleting all mouses and keyboard and re-adding them. I have tried just have the MM and nothing works. Like I mention earlier, it will work just fine from anywhere of a day to several days. Then after I awake the computer from a standby mode (screensaver), I then notice the sluggishness. I just switched it out again as I am typing this and it works fine again. I wonder if I should turn off the standby mode of my computer. Seems when it goes into a sleep/standby mode, that is when the trouble starts. As suggested earlier, I also cleaned it in accordance with Apple's recommendations and change the batteries out frequently. At this point I am probably going to go with a wired mouse which I dread given the limited number of USB ports on the imac. I appreciate everyone;s advice. I have read when I googled this that the mighty mouse has always been problematic at best but I really like the right click features and the scroll ball a lot.

Similar Messages

Sluggish Wireless Mighty Mouse on my Macbook.

I have had a wireless Mighty Mouse for about 4-5 months with no problems until now. About a week ago my mouse has started to become slow and unresponsive. If I restart the device the problem goes away for a short time. Why did this start happening and is there any way to fix this???
Thanks.

The batteries was the first thing I checked but to no avail. I have been using the same surface the entire time. I can't pin down when the problem occurs because it only happens occasionally. I will post again once I can pin down exactly when the issue occurs.
Thanks.

Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
Any thoughts?
Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
Ken
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

Hey, thanks! That was fast. I'm impressed by the Mac community.
This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
Ken

Connect Wireless Mighty Mouse to windows xp pro sp2 on bootcamp

I recently installed windows xp pro sp2 on bootcamp i tried to hook up my Wireless Mighty Mouse and I got basically nowhere. I was able to get the computer to recognize it and i typed in the passkey "0000" and it knows that it is a bluetooth device and I changed the settings of the bluetooth to "always" be discoverable and still I have hit a dead end. I can still not seem to connect the wireless mouse in any way. What do I do???

I FUIGURED IT OUT!!! omg im so happy right now. For anyone who might be wondering I'll tell you how to make it work it you had the same problem. Once you establish the mouse a device, highlight it in the devices menu, then click properties, then services, and once it is done searching check the box for the driver and click apply and your mouse should work.

Does Time Machine Backup irritate wireless Mighty Mouse?

Hi there. I'm having a strange issue here. With an iMac that came with bluetooth mouse and keyboard, OS out of the box (no software updates installed because there's no internet connection), each time Time Machine is backuping files, the Mighty Mouse is acting weird. It actually feels like someone else is working with it. Even if I do not use it and leave it alone, the pointer goes wild on the screen. Trying to work during Time Machine backups is impossible, because I cannot use the Mouse properly.
Does anyone of you have a similar, if not, the same issue? Any ideas?
Thanks in advance,
later, Stephan

I am having a similar problem with my IMac and Time Machine. During wireless Time Machine backups, the wireless mighty mouse and wireless keyboard disconnect. If the mighty mouse remains connected, it moves very slowly and is virtually unusable.
So far I've thought of two potential problems to troubleshoot:
1. I experience this problem when I connect to the Time Machine through the "802.11n (802.11b/g compatible)" wireless connection (set in the AirPort Utility), but I don't experience the same problem when I connect to the Time Machine through a wired ethernet connection. So it appears the b/g compatible setting is causing interference. I haven't tested to see if the "802.11n only" wireless connections causes this problem or not.
2. I also wonder if the IMac does not have enough RAM to complete the wireless backup. My IMac has 2gigs of RAM, and during backups it maxes out. I plan to upgrade to 4 gigs to see if the problem continues. (Stephan, how much RAM to you have installed?)
peace,
Marcus

Wireless Mighty Mouse Sputters During Network activity

Has anyone figured this one out yet.
I have a wireless mighty mouse that when you copy files to or from a computer off a network,
it sputters and barely moves when trying to use it. If i plug in a usb mouse there is no problem at all.
Was using a verizon wireless router and just bought an airport extreme. Guess what. Still does it. When I hard wire my computer to the router all works fine.
I just cant think of what this could possibly be. Any help would be appreciated.
Thanks.

There are a lot of people with this problem - mostly MacBook owners, but probably because they're more likely to have the wireless and BlueTooth running.
I have the problem with a Logitech mouse on a Mac Mini -- cursor goes bonkers at random intervals, with terrible mouse lag, and I basically can't use the mouse when it's happening. It doesn't correlate with anything I can see in the Activity Monitor, but I can stop it if I turn off BOTH Airport and the router.
Not likely to be RF interference with the signals, IMO, but some have reported that switching to an 802.11n router (or 802.11g with b compatibility disabled) solved the problem.

Bluetooth headset disconnects wireless Mighty Mouse

I have a Jabra bluetooth pair of headphones (BT620S) that I use with my Intel iMac. They work great as headphones since they are connecting via A2DP. But they also have the option of being used as a headset, for example with softphones or similar. Only this is useless!
Every time I connect as a headset, my mouse disconnects and the sound result I get is really bad. It's like an inch thick concrete wall is between the headset and the computer, even though I'm sitting immediately in front of it?!
Any ideas? I've tried to unpair and pair both devices again. I also have a wireless Apple keyboard. Thanks!

"can you tell my why it says that while 2 weeks ago my WIRELESS mighty mouse
was working and that i was able to go into bluetooth icon and it was active???"
http://docs.info.apple.com/article.html?artnum=86496 Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
If the above Article is of no help and DaddyPaycheck does not have any more solutions then I suggest that you cross-post over in the Bluetooth Keyboard/Mouse Forums where the Bluethooth users hang out.

Wireless Mighty Mouse unresponsive during Bluetooth connection to K800i

Whenever I use Bluetooth to sync my Sony Ericsson K800i with my Mac, I notice that my Wireless Mighty Mouse sometimes becomes slow and unresponsive. I have to switch the mouse off and on again, after switching off Bluetooth on the phone, for the mouse to go back to normal.
I am using a third-party plugin to provide iSync support for this phone, but I don't know if that would make a difference. I never had this issue with my K750i.
Any suggestions would be very welcome!
iMac Core 2 Duo 20" Mac OS X (10.4.8)

The combo update rolls up all the patches Apple has released since 10.5 hit the shelves into one monster download; so you don't need to have installed 10.5.3 to install 10.5.4 - you can go from any version. Some users swear that applying the combo update makes for a more reliable Mac, and it fixed my Mac problem.
But beware the combo is over 1/2 Gb in size and will take a good while to download, even on a DSL connection. You can find it on the Apple downloads page at:
http://www.apple.com/downloads/macosx/apple/
There are separate versions for the regular version of MacOS X and the more specialised server edition, so make sure you download the correct version (most people just need the file named Mac OS X 10.5.4 Combo Update).
Once you've got the update, close any applications you are running (remembering to save your data), double-click the update to start and follow the instructions. You will have to restart your machine at the end of the installation and rebooting may take a little longer than normal - this only happens the first time you restart your machine. Hopefully you'll be back in business as soon as you see the login prompt.
HTH.
Mike.

Wireless Mighty Mouse has stopped selecting, cutting or pasting

My batteries ran out two days ago. I changed the batteries but since then my wireless Mighty Mouse will not select text, cut or paste. It has other erratic behavior. Any help and advice welcomed.

Sending back to Apple. Free refund.

Wireless Mighty Mouse has "loose" top shell

Has anyone else observed/been annoyed by the "looseness" of the top shell on the Wireless Mighty Mouse? I've noticed that the top shell has a definite "give" to it that preceeds the intended click of the mouse. This results in an audible "click" as you hear the plastic top shell come into contact with the base of the mouse, as well as a physical "give" that throws off the whole clicking motion and otherwise makes this $70 mouse seem like a cheap plastic toy... I posted a video (ironically filmed using my built-in isight) of the whole thing. It's the first time I've posted a video online so make me feel competent and take a look and see if this is what you're suffering from. If there is a serious issue with this, maybe we could take this info back to apple...
The video of this can be found here:
http://www.youtube.com/watch?v=Ica7xvQ7Noo
Best,
Dustin
MacBook Mac OS X (10.4.6) 2 GHz/1G/80G

Try cleaning it! http://docs.info.apple.com/article.html?artnum=302417

Apple Wireless Mighty Mouse internal speaker not working !!!

Recently I bought an used Wireless Mighty Mouse (first version with grey side buttons), the mouse is working perfectly minus the single little detail that I can not hear any clicking sound from the internal tiny speaker inside the mouse when I use the little scroll ball above the mouse or when I press the grey side buttons, is this normal or should I hear the clicking sound simulated by the internal speaker? is there a way to enable or disable the internal speaker by software? Maybe is disabled by default, I don't know. I really don't think the speaker could be damaged due to the rest of the mouse is working like a charm but maybe mine came without a speaker, could be? or maybe it got disconnected somehow. Any clues or ideas would be very helpful. Thanks !

I know what a microswitch is, please look at these links, here are the proof there is (or maybe there was) a tiny speaker in some mighty mouse and wireless mighty mouse:
http://arstechnica.com/uncategorized/2005/08/dissect/
and this:
https://discussions.apple.com/message/988965#988965
and this:
https://discussions.apple.com/message/1429358#1429358
and this:
http://www.youtube.com/watch?v=OOw04wTtlIo
and this:
http://macdailynews.com/2005/08/02/apples_new_mighty_mouse_provides_audio_feedba ck_for_clicking_and_scrolling/
and I can keep giving you tens of links to proof you that actually there is (or maybe there was) a tiny speaker inside the mighty mouse and the wireless mighty mouse, If yours came without one it doesn't necessarily mean all came without one, right? That is why I asked you what version you have in order to figure out which ones does have the speaker and which one doesn't.

Latest boot camp + wireless mighty mouse

Hi,
I was using boot camp 1.01, I just upgraded to the latest version of boot camp. Now, my wireless mighty mouse scroll doesn't work on the WinXP side. Does anyone know how to get it working again?
In the bluetooth area in WinXP, it doesn't show the mouse, but the mouse works. I tried to add it but it doesn't find it.

Not correct. I did the complete install with my bluetooth keyboard and mouse. The firmware has low level basic support for bluetooth and it recognized my keyboard and mouse immediately. Once have finished loading xp and installed the apple drivers, you will need a usb mouse. Once the apple bluetooth driver is loaded, you won't beable to pair your keyboard and mouse until you have gone to the bluetooth control panel in xp. All you need is the mouse to do the pairing. Just have it discovery your mouse and keyboard and select to pair without using the code authentication. The caveat to this is that your keyboard loses it pairing when you start up and you will need to turn if off then on to repair. It might loss the pairing later on if you do not use the keyboard for a while. Just turn it off and on again and it will re-pair.
Glor

Wireless Mighty Mouse on Windows PC (one last time). Any luck?

Anyone with any luck trying to pair a wireless Mighty Mouse with a Windows PC?
I'm trying to get the wireless Mighty Mouse to work on a PC (not a Mac with Boot Camp). I thought it should have been easy enough since I have other Bluetooth devices that work fine. I know that topic has been discussed before but I haven't come across anything definitive that shows a way to get it to work. Would someone please point me in the right direction. If not I'll be returning it for the wired Mighty Mouse.
As it stands now my Bluetooth software recognizes the Mighty Mouse but it can't pair it. I'm pretty sure it's a Bluetooth software issue. Your thought? Thanks.

I've installed 'Bluetooth Stack for Windows by Toshiba' to pair my bluetooth headset with XP to get music from iTunes. It's working great.
I've just tried to pair the Mighthy Mouse with XP and it's working!!!
Link: http://aps.toshiba-tro.de/bluetooth/pages/download.php
Message was edited by: Henk Puister

Wireless Mighty Mouse Pointer not moving

Need some advice. My 7 month old IMAC wireless mighty mouse is scrolling fine but does not move the pointer...can someone help? Thanks!

Hi Rich:
That file is located in Macintosh HD>library>preferences. Sometimes (rare, but it happens) preference files become corrupted - causing all sorts of odd behavior.
If that does not help, try resetting the PRAM:
http://support.apple.com/kb/HT1379
If that does not fix the problem, take the mouse to an Apple store or call Applecare and indicate you have a warranty issue. Apple does replace things under warranty at no cost (shipping paid both ways). I have had a mouse and keyboard replaced in the past and was pleased with the service.
Barry
Barry

Wireless Mighty Mouse Disc

I left my install disc in a hotel room in San Francisco.
I can not find the drivers for the Wireless Mighty Mouse anywhere on Apple's site. Do I have to buy another mouse just to get the drivers? Why doesn't Apple have the option to download them?
Am I missing something?

Have you tried with the disc. Drivers for the wired Mighty Mouse are in Tiger 10.4.7. Maybe they will work with the wireless. If it doesn't work, and Apple won't send you a new disk, you could try SteeerMouse
<http://plentycom.jp/en/steermouse/index.html>
There is a free trial, and it costs a lot less than a new mouse. It might not work without the Apple drivers, but it won't cost anything to try it.

Sluggish Wireless Mighty Mouse

Similar Messages

Maybe you are looking for