SM66 or SM50 from OS level

Hello All,
we are on Ecc6, with 3 app servers and 1 CI with OS AIX .
I would like to know whats d command we can execute to see all the workprocesses from OS level.
Suppose i want to see wat all are the WP in App1 are running. So how to see that.
Its Just i want to see SM66 or SM50 from OS level.
how to achieve this.
Regards,
Sr

Try this DPMON. Its exact equivalent for SM50 in terms of killing WP/seeing the status of WP/current execution state etc..
There is option to give you more details. check that for full view.
dpmon pf=/usr/sap/SID/profile/SID_DVEBMSGXXX.pfl
Regards,
Sandeep.

Similar Messages

  • Error : Reading from Aggregation Level not permitted

    Hello Gurus,
          Could somebody please give some help or advice regarding this?
    I have a multiprovider on a regular cube and an aggregation level, for some reason the multicube gives me the following error message when I try to display data using listcube.
    Reading from Aggregation Level is not permitted
    Message no. RSPLS801
    Also the  Query on the multicube does not display data for any of the KF's in the Agg Level but when I create a query on the Agg level itself it is fine.
    Any suggestions?
    Thanks.
    Swaroop.
    Edited by: Swaroop Chandra on Dec 10, 2009 7:29 PM

    Hi,
    transaction LISTCUBE does not support all InfoProviders, e.g. aggregation level are not supported. LISTCUBE is a 'low level' to read data from the BW persistence layer, e.g. InfoCubes. Since aggregation level always read transaction data via the so called planning buffer and the planning buffer technically is a special OLAP query LISTCUBE does not support aggregation level.
    Regards,
    Gregor

  • How to include a default value in Dynamic cascading prompt from 2nd Level.

    Hi,
      I use Command Object in 'Datbase Expert' to create 'Custom Tables'  and use these tables to fetch LoVs. I use Dynamic Cascading Prompts in the reports.  I have a peculiar requirement using DCP.
      There are Four Levels as in the Example:
      Continent
       Country
       State
       City
      In the Custom Table, requirement is to create an additinal row with '' that represents 'All Values selected' for that level starting from second.  and The default selection should be '' . I defined that '*' means 'All Vales Selected in the report' This si not a problem. But the problem how to show a default value in a Dynamic Cascading Prompt i.e. how we can make sure in an default value can be selected in DCP from Second Level?
    how can the examples 1,2,3 can be achieved detaisled below beacsuse we need to show a default value in Casacading Propmt
    Eg of Schedules with DCP:
    Schedule 1   
      Continent: Europe
       Country: *
       State: *
        City:  *
      Schedule2:
       Continent: Europe
       Country: England
        State: *
         City: *
    Schedule 3:
        Continent: Europe
       Country: England
        State: Greater London
         City: *
    Schedule 4:
    Continent: Europe
       Country: England
        State: Greater London
         City: City of london

    You won't be able to have a true "default" value in the various cascading levels, since there aren't default values in a dynamic cascading parameter.  That being said, I've created a sample report in Crystal Reports 2008 that has a Command-driven DCP with '*' values for the 2nd and 3rd levels of my 3-tier DCP and have accounted for them in the record selection criteria.  You can find the sample here at https://www.box.net/shared/mav5qp337j

  • KE30 is not picking the data from summarization level

    Hi Techies,
    We are facing one issue in KE30 tcode.
    We are able to run the same report in our QLTY, its showing "Data is getting fetched the data from summarization level 33" and we can see the output within 5 mins, But if we use same parameters in PRO, its showing "Data is getting fetched from segment level".
    So we are not getting data in PRO, its throwing TIME_OUT error....
    Request you to suggest how we can map these summarization level to the particular report.
    *We have already rebuilt and refreshed the summarization levels, then also it is being picked from segment level.
    Thanks in advance,
    NIck Loy

    Hi,
       In KE30 right click on the report. Click on change. Go to the options tab. In the performnace block check if radio button "use a summarization level" is selected.
      If the customizing is correct then the select stamenet generated by the report may not be in sync with the summ level i.e. the chars in the selection of the report must be there in the summ level.
    regards
    Waman

  • How to reset password from sql level

    Dear All,
    I have created a new client 300 which is a copy of 000,
    i have selected only SAP_CUST  profile, no user master profile is selected.
    After creation of client i have created one user,
    now only one user is existing in newly created client 300, unfortunately , i am unable to login using that user,
    for which i have to reset the password,
    how do i proceed to attend this issue.Can i do it from OS level or SQL level,, if so then please let me know how do i proceed for it.
    regards,
    SM

    HI,
    use the source client password for SAP*
    suppose you copied 300 client from source client  000 then use 000 sap* password in 300
    if you are still getting problem with login using sap* in client 300
    then  do following
    run query analyzer if you use SQl server 2000
    or run sql server management studio if you use SQL 2005
    connect to database
    use folloiwng query
    in SQL 2005 click on new query
    USE SID
    DELETE sid.USR02 where MANDT='300' and BNAME = 'SAP*'
    where SID = your sap system id ID in uppercase
    sid = your sap system id in lowercase
    query is case sensitive
    after executing query login with sap* user and password 'pass'.
    regards,
    kaushal
    regards,
    kaushal

  • How to retrive the Direct purchase entries from table level? S_ALR_87012050

    Hi All
    In our current project we need to retrieve the direct purchase report from table level. Can you please provide me the direct purchase related table? Normally we are executing the standard report S_ALR_87012050
    to extract the direct purchase entries. We need to know which table has the direct purchase entries.
    Regards
    K.Gunasekar

    K,
    Your problem description is still insufficiently detailed.
    It appears now that you are searching for asset numbers.  Please confirm.
    Your selection criteria "Inventory Number NE 0" doesn't appear to make much sense.  Inventory number is not a quantity, it is the name of an object.  I guess it is meaningful you have some inventory numbers named as '0'.  I don't think this setting is causing your problem though.....
    You didn't mention which table you accessed to discover that you had a perceived discrepancy.  Which table did you browse to see the results you mentioned?  Please describe the selection parameters for each table you reviewed, and the results for each table that you examined.
    It is also the practice of many companies to archive asset data.  If this is the case in your company, then the archived data will not reside in the 'A*" tables.
    You mentioned that you used the same parameters to select the data.  How did you select "Report Date" when you did the table extract?  I am not aware of a field that is named "report date' in any of the tables mentioned.
    Rather than slog through tables, you might want to try SE16, view "V_ANLAZ".  This is a preconstructed linkage of ANLA and ANLZ that is used by S_ALR_87012050 as a starting point.
    I really think you should consult with your ABAPers.  In two minutes they can give you your answers.  It will take me several messages and probably several days to get you the same answers.
    Best Regards,
    DB49

  • How do I prevent all dialog processes in SM50 from being occupied?

    Hi experts,
      I have set rdisp/rfc_min_wait_dia_wp = 4 and I still saw all dialog processes got occupied.
    (PS: This screenshot is captured after a few minutes). Anyway, how do I prevent all dialog processes in SM50 from being occupied?
    Should I increase rdisp/rfc_min_wait_dia_wp ( = 4 now ) and rdisp/wp_no_dia ( = 18 now ) to a higher value?

    Hi Gaurav & Nick,
       If I understand correctly, there are 4 dialog processes running and 14 RFC running at the same time.
    If I want to resolve this problem, I need to reduce paralellism of RFCs and increase dialog work processes, right? Here is my new configuration. Any thoughts?
    new parameters:
    rdisp/wp_no_dia = 20
    rdisp/rfc_min_wait_dia_wp = 10
    rdisp/rfc_check = 3
    old parameters in profile:
    rdisp/wp_no_dia = 18
    rdisp/wp_no_btc = 13
    rdisp/wp_no_enq = 0
    rdisp/wp_no_spo = 2
    rdisp/wp_no_vb = 5
    rdisp/wp_no_vb2 = 2
    rdisp/rfc_min_wait_dia_wp = 4
    rdisp/rfc_check = DEFAULT  (DEFAULT is 2, ASYNC and SYNC RFC)

  • Function to fade audio smoothly from one level to another in AS2

    Greetings all.
    I'm a newcomer to Actionscript programming and trying to modify a Flash site template downloaded from TemplateMonster.com (which is an AS2 template).  I've almost succeeded at what I need to do but have run into a couple of brick walls.  One is that I've added a video player to the site and need to make the background music track smoothly fade out when the video starts and fade back in when it ends (or is stopped).  I set up a listener object for the video player that works.  It's the smooth fade of audio levels that doesn't.
    I found an excellent thread from last year (http://forums.adobe.com/message/3236495) in which kglad address the issue of fading audio from one level to another.  Since TemplateMonster's templates set up a master movie clip and then load pages to play within it, and I need to call the function from within the pages, I tried setting it up as a global function.
    So when the overall site initializes, I have this:
    this.createEmptyMovieClip("mcMusictrackHolder", this.getNextHighestDepth());
    var sndAudio:Sound = new Sound(mcMusictrackHolder);
    var nMaxMusicVolume:Number = new Number(mcMusictrackHolder);
    nMaxMusicVolume = 30;
    sndAudio.attachSound("MusicTrack");
    sndAudio.setVolume(nMaxMusicVolume);
    sndAudio.start(0,9999);
    // Here is kglad's function converted to a global function
    _global.fadeSoundF = function(mc:MovieClip,s:Sound,vol:Number,sec:Number):Void
         trace("Getting here with sound at " + s.getVolume());
         clearInterval(mc.fadeI);
         var volumeInc:Number = vol-s.getVolume()/(10*sec);
         mc.fadeI=setInterval(fadeF,100,mc,s,volumeInc,vol);
         trace("Leaving with sound at " + s.getVolume());
    function fadeF(mc:MovieClip,s:Sound,inc:Number,endVol:Number):Void
         s.setVolume(s.getVolume()+inc);
         if(Math.abs(s.getVolume-endVol)<inc)
              clearInterval(mc.fadeI);
    Then within the page that contains the video player (a child of the above), I have this:
    var listenerObject:Object = new Object();
    var sCurrentState:String;
    listenerObject.stateChange = function(eventObject:Object):Void
    sCurrentState = my_FLVPlybk.state;
    if (sCurrentState == "playing")
      fadeSoundF(_root.mcMusictrackHolder,_root.sndAudio,0,1);
    else
      fadeSoundF(_root.mcMusictrackHolder,_root.sndAudio,_root.nMaxMusicVolume,1);
    my_FLVPlybk.addEventListener("stateChange", listenerObject);
    The listener object is working fine - so if instead of calling fadeSoundF I simply do _root.sndAudio.setvolume(0) to mute and _root.sndAudio.setvolume(30) to restore it works fine except that the volume changes abruptly instead of ramping.
    But obviously there's a problem with my effort to convert kglad's function to global and use it that way, because the trace statements tell me the audio is getting set to random levels.  It smoothly ramps all right - but tries to get to -472 or +8212 or other insane numbers.
    Any help with where I'm going wrong would be deeply appreciated.  Keep in mind that although I have some long-ago programming experience in other languages, this environment is completely alien to me and you can feel free to assume I'm completely ignorant.  What I've managed to piece together is largely pulled from online research, which is why there's probably an obvious glaring error in there.  Feel free to provide a response that assumes I know nothing.
    Best,
    Pete

    I added a few more traces.  Here's the new main page:
    this.createEmptyMovieClip("mcMusictrackHolder", this.getNextHighestDepth());
    var sndAudio:Sound = new Sound(mcMusictrackHolder);
    var nMaxMusicVolume:Number = 30;
    sndAudio.attachSound("MusicTrack");
    sndAudio.setVolume(nMaxMusicVolume);
    sndAudio.start(0,99999);
    _global.fadeSoundF = function(mc:MovieClip,s:Sound,vol:Number,sec:Number):Void
              trace("Getting here with level at " + sndAudio.getVolume());
              trace("asking to set it to " + vol + " in " + sec + " second(s).");
              clearInterval(mc.fadeI);
              var volumeInc:Number = vol-s.getVolume()/(10*sec);
              mc.fadeI=setInterval(fadeF,100,mc,s,volumeInc,vol);
              trace("Leaving with sound at " + sndAudio.getVolume());
              trace(" ");
    function fadeF(mc:MovieClip,s:Sound,inc:Number,endVol:Number):Void
              s.setVolume(s.getVolume()+inc);
              if(Math.abs(s.getVolume-endVol)<inc)
                        clearInterval(mc.fadeI);
    Here's sample trace output:
    Getting here with level at 30                  <---- this is on first visiting the page where the listener object initializes and asks it to ramp the audio from its
    asking to set it to 30 in 1 second(s).             current level to the same level (probably because the video is buffering or rewinding and that counts as a state change).
    Leaving with sound at 30
    Getting here with level at 111                <---- this is a second triggering of the function (probably because the video is STOPPED and that counts as a
    asking to set it to 30 in 1 second(s).            state change after buffering).  As of yet the video hasn't been asked to play.
    Leaving with sound at 111
    Getting here with level at 3765               <---- This is what happens when the video is asked to play; since it is asking to leave the level at 30 I'm guessing it is buffering
    asking to set it to 30 in 1 second(s).              again but not playing yet, which is why it's still being asked to set the background to 30 instead of 0.
    Leaving with sound at 3765
    Getting here with level at 3765                <---- NOW the video is actually playing, so it asks to set the background audio to 0.
    asking to set it to 0 in 1 second(s).
    Leaving with sound at 3765
    Getting here with level at -41740             <---- ... and I hit STOP, which generates a request to bring the background audio back to 30.
    asking to set it to 30 in 1 second(s).
    Leaving with sound at -41740
    I should probably replace the if/else on the video player page with a switch/case so the function ONLY gets called when playback actually stops and starts, and doesn't get triggered for every state change.  But I think I still have an error in here someplace...
    Many thanks to kglad for your help!
    Pete

  • Checking Swap space from OS level in HPUX

    Hi All,
    We have some issues with swap in our SAP production system when I checked the ST06 Tcode
    Swap
    Configured swap     Kb    20,971,520     Maximum swap-space  Kb    54,389,460
    Free in swap-space  Kb     8,945,160     Actual swap-space   Kb    54,389,460
    And when I checked from the OS level ,it gave me the following result
    swapinfo
                 Kb      Kb      Kb   PCT  START/      Kb
    TYPE      AVAIL    USED    FREE  USED   LIMIT RESERVE  PRI  NAME
    dev     1048576  658208  390368   63%       0       -    1  /dev/vg00/lvol2
    dev     19922944  889824 19033120    4%       0       -    1  /dev/vg00/lvol9
    reserve       - 19423488 -19423488
    memory  33417940 24781076 8636864   74%
    Does it mean that total swap space is (1048576 + 19922944)KB which is 20GB?
    If yes ,then how to increase the swap space in UNIX based systems?
    SWAP SPACE = 3*RAM? If yes ,do we need to put swap size =60 GB?
    In ST06
    what is the difference between CONFIGURED SWAP-SPACE and ACTUAL SWAP-SPACE?
    Regards,
    Prashant
    Edited by: Prashant Shukla on Oct 13, 2008 4:21 AM
    Edited by: Prashant Shukla on Oct 13, 2008 4:23 AM

    Hi,
    Thanks for ur reply but when I checked it from OS level why it is showing only 20GB ?
    What's the diff between configured and actual swap space ?
    I checked SAP Notes :146289 and 153641
    They clearly says that swap space should be atleast 20 GB plus 10 GB for additional Instance for the server.
    In our landscape we have CI and 4 dialog instance connected to it
    that means our swap space should be 20 + 10*4=60 GB
    We are having HPUX server and ST06 Swap values are
    Swap
    Configured swap     Kb    20,971,520   Maximum swap-space  Kb    54,389,460
    Free in swap-space  Kb     8,697,960   Actual swap-space   Kb    54,389,460
    Do we need to increase the SWAP Space to increase the system performance?
    What is difference between configured swap and actual swap space ?
    SAP Note 1112627 clearly says that SWAP SPACE = 2* RAM for HPUX servers.
    What do you guys say about this?
    Regards,
    Prashant
    Edited by: Prashant Shukla on Oct 13, 2008 5:15 AM
    Edited by: Prashant Shukla on Oct 13, 2008 5:53 AM

  • Not able to display the Installation Base of once it unassigned from upper level Installation IBase.

    Hi All
    I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
    Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
    The error I am getting for above is
    Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
    Message no. IQ122
    Diagnosis
    Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
    System Response
    The system cancels processing.
    Hi experts please suggest.
    Regards
    Kesava

    Hello Kesava
    Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
    Regards
    Naresh

  • Shippment cost blocking from shpment level

    Dear Friends,
    I am using the shipment cost to do the payment. For that I am mentioning the Vendor name/code in the Shipment level and that vendor is reflecting in the Shipment cost level.
    My query is that,
    a) I would like to input the code of all vendors in the Shipment, but not always I will raise the Shipment cost against all of them.
    b) For perticular Shipment, for particular vendor, I will not raise the payment invoice, and that I would like to block from shipment level, so that no one can raise the same.
    c) I would like to assign this in each shipment level, not in the Master data level.
    Authorization:
    d) I need the authorization procedure to do the blocking.
    e) not everyone can block or unblock on the above way.
    My main objective is that, there are few shipment for which I would not like to raise the outgoing billing for that to the vendor.
    Please try to guide me.
    Rgds
    Farhad

    Sir/Madam,
    Pls try to help me.
    Rgds
    Farhad

  • Dunning Procedure (FBMP) - Total Due Items from Dunning Level

    Hi,
    In Dunning Procedure (FBMP), there is a field called "Total Due Items from Dunning Level" ...
    Questions: What does this field mean?
    Besides, if possible, kindly explain the following:
    1) Min.days in arrears (acct):
    Days in arrears which at least one item in this account must have for a dunning notice to be created. These minimum days in arrears have no influence on calculating the days overdue.
    If I put 50, then does this mean that system won't generate dunning notice, although in the dunning level 1: 15, dunning level 2: 30, and dunning level 3: 45?
    Thanks.

    hi,
    The dunning intervals are usually meant for two purposes, one to send notices at appropriate intervals, to calculate interest on arrears accordingly for delay in payment.  The dunning days say 45 will not be calculated from the 15th day but from the original date of document posting. Say if you have an open item on 01.01.2008 and the dunning procedure calls for intervals 15.30.45 etc. first dunning is due on 16.05.2008 and second dunning 01.06.2008 third dunning due on 16.06.2008.  
    Some other useful info. whenever a dunning run is complete the vendor master and the line items gets updated automatically. So if you have to run dunning again for the one already run say, you want to generate the dunning notice of the 2nd dunning then you have to delete these details from the base records and schedule dunning once again.  Otherwise you obviously will generate notice of the last dunning run.  Also if you are scheduling dunning for group of vendors then all vendors should have the same dunning levels, otherwise the output will be of the latest dunning level. But the master records and line items gets updated correctly.  Example you are dunning for two vendors one has got the second level due and other has got 3rd level due but the output for the two will be the output of 3rd level . But the vendor master and line items gets updated as 2 and 3 accordingly. This will happen if and only the vendors fall in the same dunning procedure.
    clarify if you have still doubts,
    regards

  • Changing Batch Level from Material Level to Plant Level.

    I want to create the batch class with the class code 22 instead of 23. As the batch class is maintained at the Material Level, not at the Plant Level. So is it possible to change the batch class from Material to Plant Level and create batch class with code 22.
    Kindly suggest.

    Hi, Thanks for ur reply.
    I have applied SAP notes and changed the batch status from material level to plant level...But still i am getting the class type as 23.
    What are the next steps to be done. Currently in OMCT, Batch Level Conversion tab is active and rest all the tabs are in inactive state. so please guide.

  • Determine Max Value from Lower level?

    Hi,
    I have requirement to determine maximum value from lower levels. Please post your ideas to resolve this requirement using BEx Query designer.
    Level_A1         MAX (KF1 of lower level - B1 to B2 or C11 to C1n + C21 to C2n)
        Level_B1     MAX (KF1 of lower level - C11 to C1n)
             Level_C11     KF1
             Level_C12     KF1
             Level_C13     KF1...
             Level_C1n     KF1   
        Level_B2     MAX (KF1 of lower level – C21 to C2n)
             Level_C21     KF1
             Level_C22     KF1
             Level_C23     KF1...
             Level_C2n     KF1
    Thank you very much…
    BW User

    Did you try @ancestval http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?ancestval.html
    Regards
    Celvin
    http://www.orahyplabs.com

  • Service name from user level through any query

    Hi
    One of my user want to find the oracle service name through SQL query from user level. This user is not a DBA.
    With DBA privs this querry
    SELECT NAME, VALUE FROM V$PARAMETER WHERE NAME = 'service_names';
    brings the correct result. But user he will not have the access to read the V$PARAMETER table which is part of sys object.
    select sys_context('USERENV','SERVICE_NAME') from dual;
    SYS_CONTEXT('USERENV','SERVICE_NAME')
    SYS$USERS
    this query is not giving my the correct result. Is there any way we can grab the service name from user level.
    Your cooperation is highly appreciated.
    Rao

    select sys_context('USERENV','SERVICE_NAME') from dual;You need to note that the result of the above depends on how you connect to the database. If you connect using NET Service, it should give you the SERVICE_NAME.
    SQL> conn sys as sysdba
    Enter password:
    Connected.
    SQL> show parameters service_name
    NAME TYPE VALUE
    service_names string testdb
    SQL> select sys_context('USERENV','SERVICE_NAME') from dual;
    SYS_CONTEXT('USERENV','SERVICE_NAME')
    SYS$USERS
    SQL> conn sys@testdb as sysdba
    Enter password:
    Connected.
    SQL> select sys_context('USERENV','SERVICE_NAME') from dual;
    SYS_CONTEXT('USERENV','SERVICE_NAME')
    testdb
    SQL> conn scott@testdb
    Enter password:
    Connected.
    SQL> select sys_context('USERENV','SERVICE_NAME') from dual;
    SYS_CONTEXT('USERENV','SERVICE_NAME')
    testdb
    SQL> conn scott
    Enter password:
    Connected.
    SQL> select sys_context('USERENV','SERVICE_NAME') from dual;
    SYS_CONTEXT('USERENV','SERVICE_NAME')
    SYS$USERS
    SQL>
    So you need to understand the use of sys_context

Maybe you are looking for