SMALL ISSUE WITH ALV HIERARCHY

Hi
Hi ,
I have small doubt in alv hierachail report ,
can anyone tell me how the header and the item level data match
i have iheader and iitem internal tables.
say i have matnr in iheader ,do i need to have the matnr field in iitem also
so if expand the iheader then i needed to get the material desc for that material.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_LAYOUT-EXPAND_FIELDNAME = 'EXPAND'.
iKNOW THAT I HAVE TWO PASS SOMETHING TO S_KEYINFO TO RELATE .CAN ANYONE TELL ME HOW TO DO THIS.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
       EXPORTING
            i_callback_program = v_repid
            is_layout          = s_layout
            it_fieldcat        = t_fieldcatalog
            i_tabname_header   = 'IHEADER'
            i_tabname_item     = 'IITEM'
            is_keyinfo         = s_keyinfo
       TABLES
            t_outtab_header    = iHEADER
            t_outtab_item      = iItEM
       EXCEPTIONS
            program_error      = 1
            OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks

Hi Swathi,
Check out std programs:
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_HIERSEQ_LIST_EVENTS
BALVHD01
BALVHD01_GROUP
BALVHM10
BALVHM12
hope this helps.
Manish
Message was edited by:
Manish Kumar

Similar Messages

Issue with ALV grid print preview/spool

Hello everyone,
I am working on a report and I am having some issues with ALV grid. Currently in our DEV and QA environments the user can run the report, view the ALV grid, and print the grid without any issues.
However this isn't the case in the Prod environment. The user is able to run the report and view the grid without any issues. But when they click print preview or click print, the spool is incorrect. It shows the proper values from the grid, but the first field is reduced in length. Rather than showing a numeric field of length 10 it shows 99999999# or 99999999...
The programs are identical through every environment, including user parameters, formats, and spool settings. I have been told printing grids may have some issues, does anyone have any advice or dealt with this issue before?
I appreciate the help.
Thanks,
C

I was waiting to hear from the functional team on the matter and no one has mentioned any more issues. I am assuming the problem is solved. I just noticed the thread was still un-answered and wanted to give an update.
Thank you for you help Vijay.
Regards
C

Pricing issue with Product hierarchy - Urgent

Hello,
I have an issue on pricing determination with product hierarchy.
I created product hierarchy as following,
level1 - A0001
level2 - A0001B0001
level3 - A0001B0001C0001
Then, assigned A0001B0001C0001 to material D in material master.
I created condition record with A0001B0001C0001(level 3), the system found the condition sucessfully when I created a sales order with material D.
However, I created condition record with A0001(level1) but the system didn't get the price when I created the sales order with material D. Since A0001B0001C0001 belongs to A0001, the system is supposed to get the price from the condition record with A0001...
Could you please let me know how to fix it?

Hi,
Thanks a lot for your kind explanation.
Here is the access sequence I defined. I wonder if there is anyway I can define PRODH1, PRODH2, PRODH3 in access sequnce the same way with customer hierarchy so that the system can check higher level data. If it's not allowed, I think I should define routine in requirement as you advised. Thanks!
*Accesses
AcNo       Description
1           Customer Hierarchy/Product Hiearchy
2           Customer Hierarchy/Product Hiearchy
3           Customer Hierarchy/Product Hiearchy
4           Customer Hierarchy/Product Hiearchy
Fields
AcNo   Condition    Doc. field      field lable
     1      HIENR      HIEBO01     CustomerHierarchy 01
             PRODH     PRODH       Product hierarchy
     2.     HIENR      HIEBO02     CustomerHierarchy 02
             PRODH     PRODH       Product hierarchy
     3      HIENR      HIEBO03     CustomerHierarchy 03
             PRODH     PRODH       Product hierarchy
     4       HIENR      HIEBO04     CustomerHierarchy 04
             PRODH     PRODH       Product hierarchy
I wonder if I can assign product hierachy fields, PRODH1, PRODH2, PRODH3 to access sequence like customer hierarchy so that the system can check higher level data to get the price...

Should I buy a new MBP? (Lots of small issues with mine)

Hi,
There are a number of small but irritating problems with my MBP. Talking with a friend who has had her macbook into apple service 3 times now for replacements a lot more serious than my problems, I'm sure Apple won't replace the computer. A friend who has bought a couple MBPs now (later week version) has had very little problem with his.
Specifically, the issues I'm having are as follows:
1) CPU whine (I know this can't be fixed)
2) Fan "moo"/clunk. The computer sounds like a small helicopter at times and at the best of times is always noisy..
3) Heat issues - using the comp anywhere but on a flat surface (i.e. on my lap) and it heats up intensely. I know this is an issue with all computers, but compared to my powerbook it's night and day.
4) Lag Issues. Doing ANYTHING takes a "long" time. I need to reformat but from opening firefox to booting up the computer or even sometimes mousing over the icon tray.
5) Red headphone led. My internal speakers no longer work. I've read the problem has something to do with the headphone jack being stuck. Some fixes I've read include using a match stick, plugging in the headphones again (doesn't work).
6) My display flickers slightly now also. Seems to synch with the fan "moo"ing.
I'm using macintosh now because I like avoiding hassles. I switched from PC a few years ago after going through lots of issues and the powerbook was AWESOME. I'm assuming the macbookpro is going to eventually stabilize and work well also, is it there yet? Shall I buy a new one and just dump the current or will it be the same thing all over?
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Thanks for all the advice, it's appreciated. Particularly the advice to go down to the mac store and talk to a guru. I'm going to do that tomorrow.
I've been able to tolerate things up until the latest bug, the fan now periodically starts spinning like a helicopter. It's way beyond anything I've dealt with.. I can't listen to music it's so loud and it disturbs anyone else around (clearly needs a fix).
I can't send it in to be repaired as I can't do without a computer for that long. This said I thought to connect the new and old machine and copy the most important files over.
(No I won't dump this lemon on someone else without letting them know about the issues. It may well be worthwhile to someone willing to nurse it through the various mac warranty & update issues. Eventually they may well end up with a new MBP).
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Having 2 small issues with 10.4.3 interface - shift click & control click

I am having two issues with 10.4.3 on my mom's computer.
1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
2) I am in iPhoto and would like to select multiple film rolls (consecutive rolls) by clicking the first and then clicking the last one that I would like and it is working like I am comand clicking and only selecting the two rolls that I have clicked on and not the ones in between.
Any help in how to work this out would be great.
Happy Turkey Day!
K

1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
Do you have any third-party items in:
/Library/Contextual Menu Items/
/Users/YourUsername//Library/Contextual Menu Items/
If you do, try dragging them onto your Desktop and then retry control-clicking.

Small issue with CS3 / CS4 in Vista 64

Hello,
Recently made the move from XP 32 to Vista 64 and I'm having
issues with CS3 and CS4 when it comes to inserting images and/or
browsing for background images in a CSS file.
The first issue I have is where the cursor starts out. See
the image below:
http://img391.imageshack.us/my.php?image=ps1hb9.png
Currently when the select image dialog appears, my cursor is
nowhere to be found. This is easy enough to get around with the
n key but annoying none the less.
My second issue is more upsetting. When I type in the name of
a folder (for example the Downloads folder from the previous
picture) and press the enter key, a strange character followed by a
colon and a backslash is added (:\). The character changes but the
colon and backslash is always the same.
See:
http://img513.imageshack.us/my.php?image=ps2cm6.png
This never happened on XP32 but for some reason Vista (and I
tried out server 2008 as well) 64 bit causes this issue.
Any help would be greatly appreciated,
Mike

Zoodia, do you have the same problem with Vista 32 and what
version of vista do you have?
Or does nayone else has the same problem with Vista and
please include version and 32 or 64 bits.
thanks
Frenchy ASP

Issue with ALV sceen called using BDC in new task and in background mode

Hi Gurus,
Need your expert advice. I am trying to call one transaction (IS AUTO - VELO) which has ALVs on screen. VELO is being called through BDC in NEW TASK in background. So, the new session is a Dialog session and SY-BATCH is initial here.
In two different scenarios, I am getting error at two different places:
a) As I can't call ALV directly, I am using docking container. This is giving issue during 'CREATE OBJECT' -> CONSTRUCTOR for cl_gui_alv_grid -> if offline( ) is initial. (AS SY-BATCH is initial) -> call method me->set_registered_events_internal exporting events = lt_events. -> call method get_registered_events importing events = lt_events. -> IF H_CONTROL IS INITIAL. RAISE CNTL_ERROR. ENDIF.
b) Call to OLE_FLUSH_CALL is happening, which is resulting into dump.
I tried to search SDN and google, but couldn't find the solution. Thanks for your help :).
Regards,
Alok

I'm not sure what is eating up your system resources, but .wmv files
are considered to be a delivery format, and are not ideal for editing.
I have never tried to edit screen capture video from any source, but you might consider
upgrading to Expression Encoder 4 Pro (with codecs)... at least it includes H.264.
Expression Encoder 4 Pro

Small issues with iOS4, and iOS4.0.1 update

Hello all, I'm posting this as a general area where those using iOS4 / iOS4.0.1 on iPhone 3GS and iPhone 4 ca report any little niggles they've noticed with the most recent updates.
As I'm quite fond of my gadget, and it would be rare to see me glued to anything else, I've noticed a few. So I created this feed to show others these problems, at least to stop some worrying that its just their phone!
This is what I've found thus far:
(1) Firstly, the screen magnification function no longer works. I noticed this on the Messages application. If the 'lens' is active on the screen, with the usual prolonged hold on the screen, the entire thing is white. The same white as behind the message bubbles, wherever on the screen you hold the lens. The only thing you might see is the blue flashing place marker, which itself is not magnified either.
There is obviously some glitch that stops magnification and display within the lens. I use a 3GS, and have looked at 2 other iPhone's, a likewise 3GS and an older 3G both using the first iOS4 update.
(2) Next, I noticed some keyboards were not aligning to the crrect rotations on some third-party applications. When in portrait, if the keyboard is activated and then the phone is rotated, the narrow keyboard is displayed on the far left of the screen, in place of the wider landscape pad. The same is true, in reverse, if the phone is rotated from landscape when the keypad is activated.
(3) One other issue is that some of the text alignment can be off, resulting in images and text and symbols being misplaced. I noticed this on the iPod application, on some music videos the small TV icon Apple uses for denoting videos is halfway across the screen, and the name is pushed away from the track numbering column.
These are the issues I've seen so far. This is not me complaining, it is just a place where fellow users to report issues they've noticed and make others aware.
I don't know if this has been done, and even if it has, its good to have a new comprehensive and up-to-date list.
I would be interested to see what other issues users have encountered so please share. Any issues at all.
I have some screenshot images of the problems I've listed should anyone wish to see what I mean, sadly images cant be uploaded on this forum.

*BUMP* Does anyone have any ideas? Or has anyone managed to fix this problem for themselves?

Issue with ALV Grid and events

Hi,
I am creating an ALV Grid with fields Matnr,Charg,Labst,Meins. The first three fields are editable and the last (MEINS) is read only.
Now I am trying to fill the MEINS field programmaticly after entering the MATNR and confirm with enter/return.
I think that I have to "overload" the enter event of the alv grid to fill the MEINS everytime when a MATNR was entered. But I don't know how I could implementing this. Could you give me a hint how I could solve this problem?
(The behavior should look like in transaction MIGO)
Thanks

Hi Alex
When you press enter an event is triggerd and function code is filled in sy-ucoom or you can say in ok_code. At that time PAI event occurs. In PAI of that screen you need to check ok_code and load new data in table which you passed to ALV and also refresh the ALV.
data: ok_code like sy-ucomm.
PAI----screen 100
case ok_code.
when 'ENTER'.
select data
and refresh ALV
then again call
funtion to display ALV
Regards
Aditya

Small issue with custom table cell editor and unwanted table row selection

I'm using a custom table cell editor to display a JTree. Thing i notice is that when i select a value in the tree pop-up, the pop-up closes (as it should) but then every table row, from the editing row to the row behind the pop-up when i selected the value becomes highlighted. I'm thinking this is a focus issue, but it thought i took care of that. To clairfy, look at this: Before . Notice how the "Straightening" tree item is roughly above the "Stock Thickness" table row? When i select Straightening, this is what happens to my table: After .
My TreeComboBox component:
public class TreeComboBox extends JPanel implements MouseListener {
    private JTextField itemField;
    private TreeModel treeModel;
    private ArrayList<ActionListener> actionListeners = new ArrayList<ActionListener>();
    private Object selectedItem;
     * Creates a new <code>TreeComboBox</code> instance.
     * @param treeModel the tree model to be used in the drop-down selector.
    public TreeComboBox(TreeModel treeModel) {
        this(treeModel, null);
     * Creates a new <code>TreeComboBox</code> instance.
     * @param treeModel the tree model to be used in the drop-down selector.
     * @param selectedItem tree will expand and highlight this item.
    public TreeComboBox(TreeModel treeModel, Object selectedItem) {
        this.treeModel = treeModel;
        this.selectedItem = selectedItem;
        initComponents();
     * Returns the current drop-down tree model.
     * @return the current <code>TreeModel</code> instance.
    public TreeModel getTreeModel() {
        return treeModel;
     * Sets the tree model.
     * @param treeModel a <code>TreeModel</code> instance.
    public void setTreeModel(TreeModel treeModel) {
        this.treeModel = treeModel;
     * Returns the selected item from the drop-down selector.
     * @return the selected tree object.
    public Object getSelectedItem() {
        return selectedItem;
     * Sets the selected item in the drop-down selector.
     * @param selectedItem tree will expand and highlight this item.
    public void setSelectedItem(Object selectedItem) {
        this.selectedItem = selectedItem;
        String text = selectedItem != null ? selectedItem.toString() : "";
        itemField.setText(text);
        setToolTipText(text);
     * Overridden to enable/disable all child components.
     * @param enabled flat to enable or disable this component.
    public void setEnabled(boolean enabled) {
        itemField.setEnabled(enabled);
        super.setEnabled(enabled);
    public void addActionListener(ActionListener listener) {
        actionListeners.add(listener);
    public void removeActionListener(ActionListener listener) {
        actionListeners.remove(listener);
    // MouseListener implementation
    public void mouseClicked(MouseEvent e) {
    public void mouseEntered(MouseEvent e) {
    public void mouseExited(MouseEvent e) {
    public void mousePressed(MouseEvent e) {
    public void mouseReleased(MouseEvent e) {
        showPopup();
    private void initComponents() {
        setLayout(new GridBagLayout());
        itemField = new JTextField();
        itemField.setEditable(false);
        itemField.setText(selectedItem != null ? selectedItem.toString() : "");
        itemField.addMouseListener(this);
        add(itemField, new GridBagConstraints(0, 0, 1, 1, 1.0, 0.0,
                GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, new Insets(0, 0, 0, 0), 0, 0));
    private void showPopup() {
        final TreePopup popup = new TreePopup();
        final TreeComboBox tcb = this;
        final int x = itemField.getX();
        final int y = itemField.getY() + itemField.getHeight();
        int width = itemField.getWidth() + popupButton.getWidth();
        Dimension prefSize = popup.getPreferredSize();
        prefSize.width = width;
        popup.setPreferredSize(prefSize);
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                popup.show(tcb, x, y);
                popup.requestFocusInWindow();
    private void fireActionPerformed() {
        ActionEvent e = new ActionEvent(this, ActionEvent.ACTION_PERFORMED, "TreeComboBoxSelection");
        for (ActionListener listener : actionListeners) {
            listener.actionPerformed(e);
    private class TreePopup extends JPopupMenu {
        private JTree tree;
        private JScrollPane scrollPane;
        public TreePopup() {
            initComponents();
            initData();
        private void initData() {
            if (treeModel != null) {
                tree.setModel(treeModel);
        private void initComponents() {
            setFocusable(true);
            setFocusCycleRoot(true);
            tree = new JTree();
            tree.setRootVisible(false);
            tree.setShowsRootHandles(true);
            tree.setFocusable(true);
            tree.setFocusCycleRoot(true);
            tree.addTreeSelectionListener(new TreeSelectionListener() {
                public void valueChanged(TreeSelectionEvent e) {
                    tree_valueChanged(e);
            scrollPane = new JScrollPane(tree);
            add(scrollPane);
        private void tree_valueChanged(TreeSelectionEvent e) {
            DefaultMutableTreeNode node = (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
            setSelectedItem(node.getUserObject());
            fireActionPerformed();
            this.setVisible(false);
}My TreeComboBoxTableCellEditor:
public class TreeComboBoxTableCellEditor extends AbstractCellEditor implements TableCellEditor, ActionListener {
    protected TreeComboBox treeComboBox;
    protected ArrayList<CellEditorListener> cellEditorListeners = new ArrayList<CellEditorListener>();
    public TreeComboBoxTableCellEditor(TreeComboBox treeComboBox) {
        this.treeComboBox = treeComboBox;
        treeComboBox.addActionListener(this);
    public Object getCellEditorValue() {
        return treeComboBox.getSelectedItem();
    public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected, int row, int column) {
        treeComboBox.setSelectedItem(value);
        return treeComboBox;
    public void actionPerformed(ActionEvent e) {
        stopCellEditing();
}Any thoughts?
Edited by: MiseryMachine on Apr 3, 2008 1:21 PM
Edited by: MiseryMachine on Apr 3, 2008 1:27 PM

As I said, you have to have empty context elements before additional rows will be open for input.
For instance if you want to start with 5 rows available for input do the following to your internal table that you will bind:
data itab type standard table of sflight.
do 5 times.
append initial line to itab.
enddo.
context_node->bind_table( itab ).
The other option if you need n number of rows is to add a button to the table toolbar for adding more rows. When this button is pressed, you add a new context element to the node - thereby creating a new empty row in the table.

Small issue with media player after install of 4.5 OS

I have the BB Curve 8330 and recently upgraded the OS to the new 4.5.0.56
So before the upgrade I could be listening to tunes and when a call or email or message came in the tunes would only stop during the notification. Now however the tunes will not restart and I have to manually navigate back to the media player.
Is there a setting somewhere that I can not find or am I stuck with this now?
Solved!
Go to Solution.

Unless your sitting BEHIND your monitor it's OUR left
(Muppets line; the bear is driving Kermit is navigating) Bear left!.....right FROG!!
Okay I couldn't resist.
Let me try some searches.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Hi Experts, I have small issue with Mime object in webdynpro component?

Issue: i have imported mime object with some changes on existing mime object, But this is not reflecting it was displaying old one only,New changes are not reflecting.
Requirement : We are creating buttons with some CSS style and that image type .PNG and that image we are importing into web dynpro component as a Mime object , This same image we are creating for defferenet languages(EX : image name : Searcch_EN.png , Search_DE.png), this images we are binding the button image source property . and we are calling this image through the code.
Now problem : I want change one image Ex : Sumbit_EN.png . i need to change this button i image like " SUBMIT_EN.png". So i have created this image as per requirement and i have imported into mime object. But it was not reflecting.
Please Help me on this...
Regards,
Venugopal.P

Hi Venu,
You need to clear the cache of mime object to see the changes done.
Please follow the below steps
Right click on mim object or your image
Choose option "Expiration Time client cache" from menu
Check the individual expiry date check box and un-check the Expiry active as below
Note: you can do it for individual imange or for all mimes in a component
Hope this helps you.
Regards,
Rama

Issue with ALV output in production

Hi ,
Iam using REUSE_ALV_GRID_DISPLAY function module to display the alv output.
But the ALV is not displaying the data in production, where as it is working fine in Development and Quality.
I have checked the version there is no change.
Please advice how to fix this issue?

I have checked all the Transport request for this particular report,
Even i did the Version management .
I didnt find any change in the versiopn management.
We didnt miss any Transport related to this Report.
Please see my coding for the same.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   I_CALLBACK_PROGRAM                = V_REPID
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
     IS_LAYOUT                         = V_ALV_LAYOUT
     IT_FIELDCAT                       = V_ALV_FIELDCAT
     I_DEFAULT                         = C_X
   I_SAVE                            = 'A'
   IT_EVENTS                         = V_ALV_EVENTS
    TABLES
      T_OUTTAB                          = IT_FINAL[]
   EXCEPTIONS
     PROGRAM_ERROR                     = 1
     OTHERS                            = 2 .
IF SY-SUBRC <> 0.
Edited by: vinay raj on Nov 23, 2010 11:34 AM

Love the new version! Just one small issue with pixelpoint stylus

love the new version with different width strokes - makes a huge difference!
one minor issue is the undo button on the Adonit pixelpoint stylus only works intermittently. I find when it doesn't work I do one or two more strokes after which it works. So its not entirely unworkable but is a bit annoying.

love the new version with different width strokes - makes a huge difference!
one minor issue is the undo button on the Adonit pixelpoint stylus only works intermittently. I find when it doesn't work I do one or two more strokes after which it works. So its not entirely unworkable but is a bit annoying.

A small issue with iCloud, Address Book, and Admin accounts

Ok, I have a Macbook Pro running Lion/iCloud, and my wife has an iMac running Lion/iCloud.
I first noticed this issue when I went to Airdrop a file to her, and her picture in Airdrop turned into my picture that I have as my User account & "Me" in Address Book.
So I went to the iMac and noticed that the "Me" in Address Book was no longer my wife, but me. Not a big deal. I figure it must be the "new way" of iCloud. Whatever.
But I went to change her Admin account back to her normal picture and it worked. But then it changed back by itself. Annoying. I tried it again and it changed itself back again. So, it must be reading the default picture from Address Book/iCloud.
I guess the overall issue is that iCloud wants 1 identity for an entire family of devices. I understand this for syncing purposes, but it's annoying because my wife and I are not 1 person. She has her personality on her iMac, and I have mine on my MBP. That's why we have 2 different computers. (Steps off soap box).
I hope Apple loosens up a bit with iCloud and makes it a little more customizable.

I'm having the same frustration. Ugggh.

SMALL ISSUE WITH ALV HIERARCHY

Similar Messages

Maybe you are looking for