SmartFix Not Appearing?

I am relatively new to PRE, but am muddling my way around the program.
I watched a mini-tutorial and read the online reference about SmartFix for video clips.
I ran the auto-analyzer on all the clips in my "project". This seems to have finished successfully (and the "smart tags" are listed for each clip).
However, when I drag any of the clips to the timeline or sceneline, no option to "smartfix" the clip appears. I have tried replacing clips, dragging a clip to the end of the timeline, inserting it in the beginning, etc.
Can someone tell me why the smartfix option is not appearing and/or how I can force it to run or troubleshoot this further???
(This is full version of PRE 9.0.1)
Thanks in advance,
AJ

Hi Sonu,
the code looks ok. But since this code needs exception handling I guess you started it once with only "Maintain Master" and second time the newly added "Maintain Trans" submenu could not be added. An exception is thrown before it reaches the code ( because the first submenu already exists ).
If you restart / relogin your SBO client ( and menu is reseted )it will work.
regrads,
Maik

Similar Messages

I am trying to set up Sharing amongst several computers on my home network. I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up). There is no explanation why.

I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

External Hard Drive does not appear in finder

We purchased a 1 TB G Drive Q from the Apple Store. It is connected to my wife's iMac running the most current update of Leopard by 800 firewire and appears on her desktop and works flawlessly with time machine. I am connected to the same drive intermittently with my MacBookPro also running the most current update of Leopard. i connect with 400 firewire. Initially the drive would not appear in the finder. for the initial backup, i turned the hard drive off and on and then it would appear and i did the backup but now when i connect to the 400 firewire port, it still doesn't appear in the finder. i would much prefer not to need to turn my back up drive off and on each time i want to use time machine. i should also mention that when i connect any of my garmin training devices or my power meter by USB it is recognized very quickly as a device in finder. any ideas? i understand this may be one of the problems fixed with SnowLeopard. thanks.

I am not sure what you are attempting to do. I assume that you are not trying to connect two computers to the same external drive at the same time. That will definitely be problematic. In order to effectively use Time Machine with two Macs, you should partition the drive into two partitions. Also make sure that the drive is using a GUID partition scheme.
bd

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

Tab Strips are not appearing correctly

Hi all,
We are using SAP Portal 7.3 and we are using Custom theme. The tabstrips are not appearing properly (half broken).
I have tried changing the properties "Background color of selected tab" , "Background color of non-selected tab" and others in theme editor but this is not solving my issue.
Any help would be highly appreciated.
Thanks
Harshmeet

Hey,
Thanks for the reply. PFA the screen shot
This is how it is appearing, somewhat broken and some space below the tabs.
Thanks
Harshmeet

File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.

Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast.

Crystal Reports - Charts do not appear on reports in some cases

We have a few reports that include charts on them (created with Crystal 2008 Designer). These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
Wait... This has a curve ball...
The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear!
I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
Thanks for any help - much appreciated.

Nope... Not video corruption... We finally figured it out...
Its the 12_0 runtime. Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
Problem solved.
Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Deployed KM Scheduler Task Does Not Appear in Global Services / Scheduler T

Hi All,
I've deployed a portal service and a KM scheduler task in the same DC but cannot see the scheduler task listed under System Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks.
The service works correctly and performs its periodic processing once on initialisation of the service, and I can see the resulting log statements to make sure it has worked.
Both the service and the scheduler task are packed inside the same DC, which builds and deploys without any errors.
There are no errors in the log regarding the deployment of the DC, or the scheduler task.
There is a log statement about registering the classloader for the DC, which I assume is the statement in the IRFServiceWrapper init() that goes:
CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
But I still dont see the task listed in Global Services -> Scheduler Tasks.
Does anyone know what might be causing this or how to diagnose the problem further?
Cheers,
Steve

Hi Srini,
No it doesn't it just has the run method which is generated automatically.
I have created a local Portal Application project, which is not in a DC, and this also does not have a default constructor ether but appears in the Scheduler Tasks list as soon as it is deployed.
I also tried to create a Portal Applicaiton DC and Portal Applicaiton (Packaged as SDA) DC and despite the scheduler task being the same, both the DC tasks do not appear in the Scheduler Tasks.
The only one I can get to work is the local Portal Application project. This is no use as we cant store this in DTR (unless someone can explain how to do this???).
The Portal Application project packages up the RF Framework JARS inside its PAR file, but the DC and SDA projects dont, so I tried including them via an Assembly Public Part to an External Library DC, which does include the JARs in the deployment files but they still dont appear in the Scheduler Tasks.
Has anyone out there got a working Scheduler Task in a Portal Application DC?
Cheers,
Steve

Idoc not appearing in Xi system

Hi experts,
I have developed a idoc to file scnario but the idoc trgerred in the ECC system i snot comming to XI. I have done all the setting IDX1 and IDX2 and partner profile settings in ECC. the idoc status is 03 in ECC which says the idoc is sent to port successfully, but it is not appearing in SXMB_MONI in XI. It used to work earlier. Is there any batch job or peogram does this transfer. what do i check?/
thanks
sankar

Hi,
Add the Logical System of SAP R/3 in Integration Directory as shown in the Blog and check Now
The specified item was not found.
And also check these Disscussions
No service for system in Integration Directory
No Service for System XYZ,Client 300 in Integartion Directory
Regards
Seshagiri
Edited by: N V Seshagiri on Aug 7, 2008 8:16 AM

GL is not appearing in Report S_ALR_87013326

Hello Gous,
One account is not appearing GL is not appearing in Report S_ALR_87013326 for example:
Account group = Other Expenses
Description = Dividend expense
it has accounting document as well and postings.
Thanks in advance
Ahmed

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Some CGM graphics do not appear when FrameMaker files are converted to PDF

CGM files are exported from ISO (Arbortext Isodraw 7.0 CadProcess) files. Then they are imported into Adobe FrameMaker 7.2, where all elements of the illustration are visible and can be printed. The FrameMaker FM file is converted to a PDF file using the Adobe PDF converter function of Frame. When the PDF file is opened by Adobe Acrobat 8,0 Professional, some, but not all of the illustrations in the file exhibit this problem (The callouts and other text may appear, but the lines, curves, etc. do not). The illustration prints the same way it appears on the screen. When exporting the ISO file as a CGM, the following selections are made.
When importing file into Frame, "Import by Reference" is selected.
When creating PDF in Frame, the following selections are made.
Any Suggestions would be greatly appreciated. Thanks very much.

Thanks, Michael.
I will give it a try.
Avox Systems Web Site: http://www.avoxsys.com
AVOX SYSTEMS
AIRCRAFT SYSTEMS
Rick Barusic
Senior Technical Writer
225 Erie Street - Lancaster, NY 14086 - USA
Tel: 716-686-1706
[email protected]
http://www.zodiacaerospace.com
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination, or other use of or
taking any action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you received this in
error, please contact the sender and delete the material from any
computer.
From:   MichaelKazlow <[email protected]>
To:     rick barusic <[email protected]>
Date:   11/24/2010 10:32 PM
Subject:        Some CGM graphics do not appear when
FrameMakerfiles are converted to PDF
First you should update to the latest version of Acrobat 8, since you say
you are running Acrobat 8, you should update to 8.2.5. Update your
FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
try using a different settings file. Perhaps High Quality or Press
Quality. I would never use Standard for anything where fidelity is
important.

Podcast Cover Image & Recent Podcasts Not Appearing

I know this question has been asked before, but I can't seem to get the Podcast Cover Image to appear on my client's iTunes podcast page both within iTunes and on Apple's iTunes website. When I'm subscribed to it, it does show up. What am I doing wrong?
Additionally I'm having a problem with my last 3 podcasts not appearing, and I can't figure out what happened there.
Below are links to the page on Apple site and the feed I'm using, but please let me know if I need to provide more. Any help would be greatly appreciated!
https://itunes.apple.com/podcast/living-grace-lutheran-church/id348311926?mt=2
feed://livinggraceomaha.org/lg-sermonpodcasts.xml

Your feed is OK, except that most of your episodes do not have 'guid' tags, and your enclosure tags are missing the 'length' attribute which should show the file size in bytes. Neither of these is serious and they would not cause a problem.
The Store does go through slow patches sometimes: there have been numerous occasions when people have complained about not seeing updates for two or three weeks, and I'm afraid that you've probably just hit one of these. There isn't really anything you can do about it. You could try emailing them at podcasts 'at' apple.com, but frankly you are likely to get a form answer telling you how to add episodes (which you already know). I'm afraid that it's just a question of waiting.

SmartFix Not Appearing?

Similar Messages

Maybe you are looking for