Smartform in Landscape and fax

Hi all,
I've a smartforms formular which is in lanscape. Using the OTF file, I create a PDF document using FM CONVERT_OTF  and SCMS_XSTRING_TO_BINARY. This part works perfectly. 
Then I want to Fax this PDF document which is in Landscape. Therefore I'm using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
The fax is sent but in Portrait and not in Landscape. Is there any solution to send it in Landscape ?
Thanks in advance for your Help

Hi
Please check settings of FAX. Check whether it allows Landscape format or not.
[This may helpful|Convert Smartform OTF into PDF and write to file;
Shiva

Similar Messages

  • To send smartform output through email and fax

    Hi,
    I need to send smartform output through email if the email address is present else if the email address is present then it has to be sent through fax.If both the email address and fax are present,then it has to send an email.
    Now the issue is I am able to send the email and I am getting the message as 'Output was successfully issued'.But the entry corresponding to this is not shown in SOST transaction.
    Can anyone tell me what would be the reason for this?

    HI,
    Try to look in transaction SCOT
    Regards,
    Egle

  • Email and Fax smartform for Sales Order Confirmation

    Dear friends,
    I have a reqirement to mail and fax Order Confirmation ( Smartform ) to the ship to party.
    In NACE, I have created a Output type ZAU1 in which I have considered 5 External send and assigned the driver program and routine. Also I have selected " send immediatly ". I am unable to debug the driver program. I have put breakpoint in the routine ENTRY as well. Please put some light on this.
    with regards,
    Sathar

    This is for standard t-code 'VA02'. In VA02 goto extras->header->texts->edit
    i have put ZAU1... also selected the communication strategy..
    when i save... no process log appears aslo its giving error status...
    Regards
    Sathar

  • How to set the Mail and Fax options  for the Smartforms ???

    How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

    >
    veera Karthik wrote:
    > How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
    Hi
    Check this Link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
    P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
    Vishwa.

  • Smartforms in Landscape mode not working on page two

    Hi Everybody,
    I am facing a rather special issue with Smartforms about Landscape printing and I'm out of solution. I've looked at other threads but I cannot find the correct solution to my issue.
    I defined only 1 page in my form. It is set with DINA4 and Landscape orientation. The printing works fine for the first page but when my report has a second page it is printed in Portrait mode. The print preview displays all pages in Landscape but when they are physically printed, the second page is Portrait.
    I manually calculate the number of lines to print in a loop and change page with a Command Node. Before starting printing each page I execute a Command Node to force the Landscape orientation (SLAND).
    I use the LOCL printer to print my report.
    Is there any other set up to do? In SPAD, in the ABAP program or physically on the printer or else?
    Thank you for your answers.
    Best regards,
    Sylvain

    Hi Aidan,
    Thank you for your answer and sorry for the late reply but it took a while to find the exact problem and implement it in productive system.
    The problem was related the LOCL printer definition in SPAD but it was linked to "Host Spool Access Method" parameter.
    It was set to "Print on Front End Computer (F)" but this value is not supported by SAP anymore. We had to set it to "Front End Printing with Control Tech. (G)".
    The reports are now printed in Landscape orientation correctly.
    Thank you again for your support.
    Best regards,
    Sylvain

  • Reg Telephone and Fax Number updation in Purchase orders

    Hi Experts,
    I need small information about Telephone Number and Fax numbers updation in Purchase Orders.
    Actually my user requirement is they have been provided the Purchase Organizations XXXX,XXXX.
    From this Two Purchase Orgs the users who are all created the POs the Telephone Number,Fax Number need to pick from the relvant User Master(user profile SU01).
    For this how i can discuss with my Abaper.
    If you have any idea on this please suggest me.
    Brgds,
    RK

    Hi RK
    Where do you need to update this information in the PO or the PO output ( Print / Fax / email)
    If you want to update these in the PO  then you need to use the customer exit.
    Enhancement        MM06E005 - Customer fields in purchasing document
    If you need to determine the details in the PO output then the smartform / script  being used needs to be modified to determine the data of the user derived from table EKKO - ERNAM  created by
    The address number needs to determined from table USR21 using the user ID  - PO created by( EKKO - ERNAM_ and using the address number derive the telephone number and fax number from table ADRC.

  • Smartforms in landscape layout

    Hello  Gurus ,
                           I want to print test certificate in smartforms in landscape layout , i given inch12 in output options of form attributes , but i am getting print out in portrait form , is there any particular reason that i am not getting printout in landscape .
                                                                                    Thanks and Regards
                                                                                    Shrikant Ambulkar

    Dear Mohaiyuddin ,
                                            Thanks for your prompt reply , i have tried setting suggested by you , but steel the print out is coming in portrait , is there any other setting that i am missing .
                                                                                    Thanks and Regards
                                                                                    Shrikant Ambulkar

  • Payment Advice Issue- Print and fax at the same time

    Hi,
    Currently payment advices are being sent to business partners (vendors) thorugh fax/email.   This is because process module Z_SAMPLE_PROCESS_00002040 is active in the system.  
    What I want to do is to be able to also print the payment advices even if vendor has communication data in the master data.  Program RFFoEDI1 is used with a custom form.   IDOCS are sent correctly to bank and remittance advices are faxed to vendor successfully.   With business wanting hard copies of remittance advices, when I try to reprint after first payment run is done and faxes sent running RFFOEDI1 and the payment document number, system says no records selected.   I searched in OSS and all the notes related to this issue are already in our system. 
    I have tried hard to solve this but no luck even I have done this before with other print programs but no RFFOEDI1.  One option is to remove the fax/email addresses from vendor which allows me to print but client does not want to remove fax numbers from vendor master. 
    Any suggestions will be appreciated.
    Dam

    Look into BTE 2050, through which you could possibly e-mail an additional copy to a generic company e-mail as back up electronic filing of RA. And then you can print it if need to print them on Adhoc basis
    Ron

  • HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

    So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

    In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
    Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
    Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

  • Email and fax a form

    Hi ,
           how can we send a form output as email and fax ? How to do the config for this? Can you explain the process to be done?
    Rama.

    Hi,
    See following code :
    REPORT zmail_att NO STANDARD PAGE HEADING LINE-SIZE 200.
    DATA : BEGIN OF ITAB OCCURS 0,
    PERNR LIKE PA0001-PERNR,
    ENAME LIKE PA0001-ENAME,
    END OF ITAB.
    DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
    receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
    packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
    listobject LIKE abaplist OCCURS 10,
    compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
    w_object_hd_change LIKE sood1,
    compressed_size LIKE sy-index.
    START-OF-SELECTION.
    SELECT PERNR ENAME
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    FROM PA0001
    WHERE PERNR < 50.
    LOOP AT ITAB.
    WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
    SY-VLINE.
    ENDLOOP.
    Receivers
    receiver_list-recextnam = 'XXXXX@X...'. --> EMAIL ADDRESS
    RECEIVER_list-RECESC = 'E'. "<-
    RECEIVER_list-SNDART = 'INT'."<-
    RECEIVER_list-SNDPRI = '1'."<-
    APPEND receiver_list.
    General data
    w_object_hd_change-objla = sy-langu.
    w_object_hd_change-objnam = 'Object name'.
    w_object_hd_change-objsns = 'P'.
    Mail subject
    w_object_hd_change-objdes = 'Message subject'.
    Mail body
    APPEND 'Message content' TO message_content.
    Attachment
    CALL FUNCTION 'SAVE_LIST'
    EXPORTING
    list_index = '0'
    TABLES
    listobject = listobject.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    compressed_size = compressed_size
    TABLES
    in = listobject
    out = compressed_attachment.
    DESCRIBE TABLE compressed_attachment.
    CLEAR packing_list.
    packing_list-transf_bin = 'X'.
    packing_list-head_start = 0.
    packing_list-head_num = 0.
    packing_list-body_start = 1.
    packing_list-body_num = sy-tfill.
    packing_list-objtp = 'ALI'.
    packing_list-objnam = 'Object name'.
    packing_list-objdes = 'Attachment description'.
    packing_list-objlen = compressed_size.
    APPEND packing_list.
    CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
    object_hd_change = w_object_hd_change
    object_type = 'RAW'
    owner = sy-uname
    TABLES
    objcont = message_content
    receivers = receiver_list
    packing_list = packing_list
    att_cont = compressed_attachment.
    Reward points if helpful.
    Regards.
    Srikanta Gope

  • How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files?

    How can I quickly view pdf files like I can do with Windows Picture and Fax viewer for jpg files? I need to look at several thousand PDF files. It takes too long to open each one individually. The only thing I could think of is combining them into large groups and then using the Navigation index. But I like the way windows Picture and Fax Viewer does it because you can keep the files separate. Combining PDFs causes loss of individual file names. That would be a problem since I do need to have the individual file names.

    Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.
    Try to set Windows Picture and Fax Viewer as the default viewer in Windows, then it should be listed automatically in the Mozilla Firefox Browse dialog.
    *http://www.winhelponline.com/articles/115/1/Windows-Picture-and-Fax-Viewer-as-the-default-viewer-in-Mozilla-Firefox.html
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • I need to make Landscape and portrait in the same file ? plz I don't want to go back to word

    Hi there I am trying to have page in landscape and portrait in the same file, but I couldn't, however, if there is a way where we can perform it please advise me as I need to do that for my thesis. Am happy to work only in pages if this feature is not in pages, please find us a solution.
    Regards
    Mohammed

    Export te document to PDf. Open it in Preview. Here you can rotate the a page to horisontal.

  • I have a lock rotation on my iPad 2 and it won't change from landscape and I tried to reset it but nothing and I tried from lock rotation to mute but nothing and I don't no what to do now. Can u help me plz?

    I have a lock rotation next ti my battery on my iPad 2 and it won't change from landscape and I tried to reset it but nothing and I tried from lock rotation to mute but nothing and I don't no what to do now. Can u help me plz?

    With Settings > General > Use Side Switch To set to 'Lock Rotation' have you then moved the switch on the right-hand side of the iPad above the volume control 'off' ?
    Or with the switch set to control 'notification mute' you should be able to unlock rotation via the far left of the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't being controlled by the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • HP Photosmart scan and fax no longer working

    Has anyone had their hp photosmart scan and fax stop working after installing lion os x? And, if so, what can be done to fix it? Thanks!

    Download and run the HP 2.8 update.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.3), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

  • Payment advices not picking accounting clerk phone number and fax number.

    Hi,
       We have executed payment program and payment advices got generated. But in the output it is printing everthing i.e accounting clerk name, vendor number and amount. But it is not filling the accounting clerk phone number and fax number even though we have maintained it in our customized transaction code. Will this values in the payment advices will be picked up from standard t.code OB05, there we don't have option to give these two values.
    Can anyboday help me on this.
    Regards,
    Sree

    goto accunt groups with screen layout,
    after creating the group or existing group, double click on account management, in payment transactions make the required fields are required.
    regards,

Maybe you are looking for