Smartform output printer
Hello,
The problem is that when printing a smartform, the output device taken by our custo program is always LOCL, and it should be the parameter tddest... the code is similar to:
data:
WA_SSFCOMPOP TYPE SSFCOMPOP, "OUTPUT_OPTIONS
WA_SSFCTRLOP TYPE SFCTRLOP. "CONTROL_PARAMETERS
v_printer TYPE wa_option_print-TDDEST.
WASSFCTRLOP-NO_DIALOG = 'X'.
wa_option_print-TDDEST = v_printer.
CALL FUNCTION l_form_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = lwa_ssfctrlop
output_options = lwa_ssfcompop
USER_SETTINGS =
p_seq = l_seq
p_matnr = l_matnr
p_mat_desc = l_mat_desc
p_bacth = l_bacth
p_qty1 = l_qty1
p_qty2 = l_qty2
p_date_j = l_date_j
p_resource = l_resource
p_proc_ord = l_proc_ord
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
tddes is always populated with right values.
Similar Messages
-
Smartform output printing character 'u0080' wrongly as '#'
Hi All,
I am trying to show this text "SAS au Capital Social 40.000 " , reading from LFA1-TELX1 field on my smartform output. But it the last character is showing wrongly as #. Could any one has idea of this problem ? Thanks in advance.
Thank you,
SuryaRefer the link-
Euro sign in smartform
Regards,
Amit
Reward all helpful replies. -
Two SAP systems, same smartform, different print outputs
We have two SAP systems, because of the different business areas that our company has.
We develop a smartform with a custom style which has Gill Sans MT as default font. The smartform is printed directly into PDF format.
On system A on all environments it works fine and we transported it to system B.
On system B the output on PDF format comes in bold, all the characters are bold. This happens on all environments. On preview we don't see bold font but the spacing between characters is larger than expected (for example, a date is printed in two lines of a cell).
I've checked the settings on SE73 and they are the same on both systems.
I've also created a second style were I've taken out all bold settings. On system A, the smartform' style was changed to this new one. The changes were transported to system B, and still it prints all bold.Thanks for the replys. I think this is an answer to both.
Checked SPAD and differences are:
1. output device LOCL:
System A:
- Device Type: ZSAPWIN
- Host Spool Access Method: F
System B:
- Device Type: SAPWIN
- Host Spool Access Method: G
2. Device Type:
System A:
- has two custom formats (none used on this specific smartform) -
Convert the smartform output to PDF when giving print from vf31
Hi Gurus,
I am facing one problem.I developed the program to chnage smartform output to PDF file when giving invoice print from VF02/VF03.
The same functionality i want to appy when i am giving print for the invoice through VF31.
I put the break-point in the driver program.But it is not stopping there when i am giving print from VF31.
How can i do this one..
Please Help Me.
Thanks &Regards,
R.P.SastryWhich Program you are putting the Breakpoint?
-
How do we view smartform output without clicking print preview
how can we view form without using print preview
Thanks in advanceUse 'TEST' button (F8) that is placed on the toolbar - have to use it few times to get to the preview.
You can fill there your data fields (or not) and see preview of the smartform
(use 'Print preview' when it will ask about the printer)
It's also helpful for debugging problems (f.e. table width isn't matching window width) when the form is not printing in it's main program - it writes You the problem. -
Smartforms output as HTML in email
Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSF_SAMPLE_HTML'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
JOB_OUTPUT_INFO = JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
INBUFF = HTML_XSTR
INBUFFLG = 0
INCODE = '4110' "utf-8
OUTBUFFLG = 0
OUTCODE = '0000'
CSUBST = 'X'
SUBSTC_HASH = ' '
SUBSTC_DOT = ' '
SUBSTC_SPACE = 'x'
SUBSTC = '00035'
IMPORTING
INUSED =
OUTBUFF = HTML_STR
OUTOVERFLOW =
OUTUSED = HTML_LEN
SUBSTED =
INPUT_ENDS_IN_CHAR =
ERRMSG =
EXCEPTIONS
INVALID_CODEPAGE = 1
INTERNAL_ERROR = 2
CANNOT_CONVERT = 3
FIELDS_BAD_TYPE = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
L_LENGTH TYPE I,
L_DIFF TYPE I,
LT_SOLI TYPE SOLI_TAB,
LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
CONTENT = LT_SOLI
FILENAME =
DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
GR_XSTR TYPE XSTRING,
L_GR_RAW TYPE BAPICONTEN,
L_CONTENT_ID TYPE STRING,
L_CONTENT_TYPE TYPE W3CONTTYPE,
L_OBJ_LEN TYPE SO_OBJ_LEN,
L_FILENAME TYPE STRING,
LT_SOLIX TYPE SOLIX_TAB,
LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLIX TO LT_SOLIX.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
EXPORTING
CONTENT = LT_SOLIX
FILENAME =
EXTENSION =
DESCRIPTION =
CONTENT_TYPE = L_CONTENT_TYPE
LENGTH = L_OBJ_LEN
CONTENT_ID = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
P_SUBJECT TYPE SO_OBJ_DES,
LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
EXPORTING
I_SUBJECT = P_SUBJECT
I_LANGUAGE = SY-LANGU
I_IMPORTANCE = '5'
I_SENSITIVITY = 'F'
I_MULTIREL_SERVICE = LO_MIME_HELPER
RECEIVING
RESULT = LO_DOC_BCS
CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
RECEIVER TYPE SOMLRECI1,
L_MAIL_ADDRESS TYPE AD_SMTPADR,
LO_BCS TYPE REF TO CL_BCS,
LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
L_USERNAME TYPE UNAME,
SEND_PARTNER TYPE BU_PARTNER,
LI_SENDER TYPE REF TO IF_SENDER_BCS,
LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
RECEIVING
RESULT = LO_BCS
CALL METHOD LO_BCS->SET_DOCUMENT
EXPORTING
I_DOCUMENT = LO_DOC_BCS
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
L_USERNAME = SEND_PARTNER.
TRANSLATE L_USERNAME TO UPPER CASE.
LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
L_FROM_MAIL_ADDRESS = L_USERNAME.
LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
EXPORTING
I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
EXPORTING
I_ADDRESS_STRING = L_MAIL_ADDRESS
I_ADDRESS_NAME =
I_INCL_SAPUSER =
RECEIVING
RESULT = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
EXPORTING
I_RECIPIENT = LO_RECEPIENT
I_EXPRESS =
I_COPY =
I_BLIND_COPY =
I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
I_WITH_ERROR_SCREEN = SPACE
RECEIVING
RESULT = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK.Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSF_SAMPLE_HTML'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CONTROL_PARAMETERS
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = OUTPUT_OPTIONS
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
JOB_OUTPUT_INFO = JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
INBUFF = HTML_XSTR
INBUFFLG = 0
INCODE = '4110' "utf-8
OUTBUFFLG = 0
OUTCODE = '0000'
CSUBST = 'X'
SUBSTC_HASH = ' '
SUBSTC_DOT = ' '
SUBSTC_SPACE = 'x'
SUBSTC = '00035'
IMPORTING
INUSED =
OUTBUFF = HTML_STR
OUTOVERFLOW =
OUTUSED = HTML_LEN
SUBSTED =
INPUT_ENDS_IN_CHAR =
ERRMSG =
EXCEPTIONS
INVALID_CODEPAGE = 1
INTERNAL_ERROR = 2
CANNOT_CONVERT = 3
FIELDS_BAD_TYPE = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
L_LENGTH TYPE I,
L_DIFF TYPE I,
LT_SOLI TYPE SOLI_TAB,
LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
CONTENT = LT_SOLI
FILENAME =
DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
GR_XSTR TYPE XSTRING,
L_GR_RAW TYPE BAPICONTEN,
L_CONTENT_ID TYPE STRING,
L_CONTENT_TYPE TYPE W3CONTTYPE,
L_OBJ_LEN TYPE SO_OBJ_LEN,
L_FILENAME TYPE STRING,
LT_SOLIX TYPE SOLIX_TAB,
LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
IF L_DIFF > L_LENGTH.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
ELSE.
LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLIX TO LT_SOLIX.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
EXPORTING
CONTENT = LT_SOLIX
FILENAME =
EXTENSION =
DESCRIPTION =
CONTENT_TYPE = L_CONTENT_TYPE
LENGTH = L_OBJ_LEN
CONTENT_ID = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
P_SUBJECT TYPE SO_OBJ_DES,
LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
EXPORTING
I_SUBJECT = P_SUBJECT
I_LANGUAGE = SY-LANGU
I_IMPORTANCE = '5'
I_SENSITIVITY = 'F'
I_MULTIREL_SERVICE = LO_MIME_HELPER
RECEIVING
RESULT = LO_DOC_BCS
CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
RECEIVER TYPE SOMLRECI1,
L_MAIL_ADDRESS TYPE AD_SMTPADR,
LO_BCS TYPE REF TO CL_BCS,
LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
L_USERNAME TYPE UNAME,
SEND_PARTNER TYPE BU_PARTNER,
LI_SENDER TYPE REF TO IF_SENDER_BCS,
LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
RECEIVING
RESULT = LO_BCS
CALL METHOD LO_BCS->SET_DOCUMENT
EXPORTING
I_DOCUMENT = LO_DOC_BCS
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
L_USERNAME = SEND_PARTNER.
TRANSLATE L_USERNAME TO UPPER CASE.
LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
L_FROM_MAIL_ADDRESS = L_USERNAME.
LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
EXPORTING
I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
EXPORTING
I_ADDRESS_STRING = L_MAIL_ADDRESS
I_ADDRESS_NAME =
I_INCL_SAPUSER =
RECEIVING
RESULT = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
EXPORTING
I_RECIPIENT = LO_RECEPIENT
I_EXPRESS =
I_COPY =
I_BLIND_COPY =
I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
I_WITH_ERROR_SCREEN = SPACE
RECEIVING
RESULT = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK. -
Convert smartform output in to PDF using CONVERT_OTF function how to do it
Hi Anil , and Hi All
I am trying to display smartforms output in java webdynpro
for that i have got the following code in sdn.
can anybody please clarify these doubts in the below code
1) What are the mandatory input and output parameters
I have to pass here in this code to my application
2) please check my previous post also in this regards please
. Please reply at the very earliest. Check the below code
Convert smartform output in to PDF using CONVERT_OTF function module and you can write pdf using parameter 'binfile' of this function in WebDynpro using the following code:
It is copied from my prg. I hope you understand it.
public void onActionGetQuote(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionGetQuote(ServerEvent)
wdThis.wdGetOppt_QwriterCustController().executeZquote_Writer_Input();
String fileName = wdContext.currentZquote_Writer_InputElement().getOrder().toString().trim() + System.currentTimeMillis() + ".pdf";
String pdfOutput = new String(wdContext.currentOutputElement().getBinfile());
if (pdfOutput != null)
try
String pdfResoucePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(), fileName);
FileOutputStream fileOutputStream = new FileOutputStream(new File(pdfResoucePath));
PrintStream ps = new PrintStream(fileOutputStream);
ps.print(pdfOutput);
ps.close();
//Display the PDF to the browser
String fileURL = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(), fileName);
IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(fileURL, "Pdf Browser", false);
window.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
window.removeWindowFeature(WDWindowFeature.MENU_BAR);
window.removeWindowFeature(WDWindowFeature.STATUS_BAR);
window.removeWindowFeature(WDWindowFeature.TOOL_BAR);
window.open();
// To collect all the file created in the server by user
quoteFiles.add(quoteFiles.size(), pdfResoucePath);
} catch (Exception e)
throw new WDRuntimeException(e);
//@@endHi
ABAPers prepared a BAPI function module which calls Smart form , how can i execute it from java Webdynpro, so that I can display the smart form in Webdynpro. Pleas reply at the very earliest. Every answer will be rewarded.
regards
jalandhar -
Text from text module is not appearing in smartform output
Hi Experts,
We are using text modules in one of our smartform to print the sender text . The name of this text module is being dynamically determined during the execution and is coming correctly but still the the text inside the text module is not appearing in the output. We checked one more similar form which is working on the similar logic but calling a different text module , there it is working perfectly. I have tried all the possibilties like changing the window size, changing the fonts and other parameters of the text module but still its not appearing . This seems to be something unusual as in both the smartforms(one with text appearing from module and one without the text) the logic is exactly similar for getting the text module name. The name is getting determined in both the cases correctly and the text modules are also maintained in same manner for both these forms but text is appearing on one and not on other.
Kindly help if any one of you have also faced similar issue.
RegardsHi Priyank,
There could be various reasons....
Wrong language for example
An easy way to prove this is, put the text direct into the smartforms and see, if it pops up immediately.
If so, you have to really debug this spot and see if the pased name is correct. (Copy paste it in the debugger, to be really sure, there could be a space in fornt or in the end...)
If that doesn't help, you have to share more details. Your question is not that very specific. You know
~Florian -
Smartforms output in Duplex mode
Hello Gems,
I have defined 3 pages and i had set all the pages to duplex mode.
I need to print set of instructions in my smartform output in duplex mode (front & back of page)
Page1 : next window is Page 2 and i have a command to print Instructions (page INST)
Page2 : next window is blank(or page 2) and i have a command to print conditions (page INST)
Page INST : Does not has main window and next page is Page 2.
My pages flow in the following way:
page1>Page INST>Page2
Page 1 & 2 have main windows.
I need to see the INSTRUCTONS on every page that is printed with data. But i am getting an extra page that is blank
with no INSTRUCTIONS at the back.
when i print, i am 1st page properly but also getting an xtra blank page with no INSTRUCTIONS on the back.
Can some one suggest me ?
Thanks
DanHi,
Define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.
For more details please refer to the below limk
http://help.sap.com/saphelp_nw70/helpdata/en/d1/802e77454211d189710000e8322d00/frameset.htm
Thank U,
Jay.... -
Error in smartform when printing multiple pages
Hi,
I m using a smartform which have two pages in it,
i m able to save and activate it without any error message and when i run the function module generated to chk my smartform
it runs fine and diplays two pages i m using.
but as i m attaching this form with my driver program it is giving an error message while running . the error message is " No other output defined in main window."
Please help me out to resolve the issue.Re: error in smartform when printing multiple pages
dharani tadikonda
Thanks for this answer. It is absolutely correct. -
How to download a smartform output as excel file WITH EXACT LAYOUT.
Hi,
I have searched the forum but could not found any satisfactory answer. I have a smartform with a table, some texts and a logo. I have to write a code which will save the smartform output as excel file in the system keeping the layout of the smartform output EXACT.
i.e., the excel file will contain the output with EXACTLY THE SAME layout as would have been for a pdf file (if the smartform output is converted to a pdf file) and the client can then edit the fields of the table in the excel file. How can I achieve this? Please give a suggestion.. Thanks in advance.Hi Anirban,
Your Requirement is to download a smartform to microsoft Excel .
Well unfortunately we can only download data into excel which is in a tabular format i.e stored in internal tables we have function modules to do the same even u can do that using OLE2.
If u try to download a smartform to Excel only format supported will be ASCII, if u will continue with that the smartforms text's will get downloaded to excel but whole data would be downloaded in a single Cell.
Code to do the same is -
>>>>
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = v_language
i_application = 'SAPDEFAULT'
IMPORTING
e_devtype = v_e_devtype.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = w_form
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = w_fmname
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE E002(zcpm) WITH 'Smartform call fails'.
ENDIF.
wa_outopt-tdprinter = v_e_devtype.
wa_ctrlop-no_dialog = 'X'.
wa_ctrlop-getotf = 'X'.
CALL FUNCTION w_fmname "'/1BCDWB/SF00000025'
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = WA_CTRLOP
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = WA_OUTOPT
* USER_SETTINGS = ' '
IMPORTING
* DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = T_OTFDATA
* JOB_OUTPUT_OPTIONS =
* document_output_info = st_document_output_info
* job_output_info = st_job_output_info
* job_output_options = st_job_output_options
TABLES
T_FINAL = T_FINAL
T_ZSDT_WAGONS = T_ZSDT_WAGONS_1
T_QTY = T_QTY
T_QTY1 = T_QTY1
T_CON1 = T_CON1
T_CON2 = T_CON2
"T_ZTMM_OUTWB_TXN = T_ZTMM_OUTWB_TXN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
T_OTF[] = T_OTFDATA-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'ASCII'
max_linewidth = 132
* ARCHIVE_INDEX = ' '
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if tabix_m = 1.
*CALL METHOD cl_gui_frontend_services=>file_save_dialog
*CHANGING
*filename = w_FILE_NAME
*path = w_FILE_PATH
*fullpath = w_FULL_PATH
** USER_ACTION =
** FILE_ENCODING =
*EXCEPTIONS
*CNTL_ERROR = 1
*ERROR_NO_GUI = 2
*NOT_SUPPORTED_BY_GUI = 3
*others = 4
*IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CALL function 'TMP_GUI_BROWSE_FOR_FOLDER'
EXPORTING
WINDOW_TITLE = 'Select A File Folder'
INITIAL_FOLDER = 'C:\'
IMPORTING
SELECTED_FOLDER = W_PATH.
endif.
CONDENSE W_PATH.
concatenate W_PATH '\' wa_final-vbeln '.XLS' into w_FULL_PATH.
****************************************************************************Saving the PDF file on to Application server************************
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = w_bin_filesize
FILENAME = w_FULL_PATH
FILETYPE = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = w_filesize
TABLES
DATA_TAB = t_pdf_tab
* FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
As u said ,u want to download a smartform to Excel it could be done but only if u r using a internal table and exactly printing line by line values in the smartform, But if u are performing calculation in between, using multiple internal table Work areas, structures, etc i.e if whole smartform is developed with many distributed windows , unfortunately it wont be possible to download a smartform to excel in such cases, because the whole output comes from multiple internal tables, calculations, etc all the data is not printed in a tabular manner so in such a case it would be just impossible to download the smartform to excel.
But we definitely have a workaround which could be done to download the data into excel.
you can develop a ALV report with a header and footer u can define the header and footer of the alv according to the smartform and the middle portion would contain the tabular kind of data which u must be using as Smartform table to print the same.
So if u have a similar kind of smartform with some header data, tabular data, and some footer data, then u can use ALV to do the same thing , advantage with ALV would be that u can easily download the same into excel.
Other alternative is that u can Convert and download the smartform to PDF and copy the same to an Excel wooksheet.
These are all the possibilities with which u can do the same.
Regards,
Akash Rana -
Smartform output to be send via Email
Hi Guys,
I have a custom report and output generated by Smartform, currently it is printing on printer.
My requirement is to sent this output to customer via Email.(email and perferred communication details are available from customer master)
We have a output management server which will receive this output and convert into PDF format and distribute this output to customer.
I would like to know what are the possible changes require on driver program.
Appriciate your help.
Regards
Pravin
Edited by: Pravin on Apr 16, 2008 9:23 PM
Edited by: Pravin on Apr 16, 2008 9:25 PMHi Pravin,
Check the following sample program. Smartform driver program. It helps you how to convert smartform output as PDF using function module CONVERT_OTF. Once it is converted mail can be sent through function module SO_NEW_DOCUMENT_ATT_SEND_API1.
Wherever u find MAI that should be mail.
REPORT zvenkat_smartform_via_mai.
*& Structures and Infotype Internal tables.
TABLES pernr.
INFOTYPES:
0000,
0001,
0002,
0006,
0022,
0023.
INCLUDE dbpnpmac.
*& Declaration part
* Types
TYPES:
BEGIN OF t_emp_info,
pernr TYPE pa0001-pernr,
ename TYPE pa0001-ename,
bukrs TYPE pa0001-bukrs,
persk TYPE pa0001-persk,
stell TYPE pa0001-stell,
gblnd TYPE pa0002-gblnd,
END OF t_emp_info,
BEGIN OF t_mard,
matnr TYPE mard-matnr,
werks TYPE mard-werks,
labst TYPE mard-labst,
meins TYPE mara-meins,
END OF t_mard.
* Work areas
DATA:
w_emp_info TYPE t_emp_info.
* Internal tables
DATA:
i_emp_info TYPE STANDARD TABLE OF t_emp_info,
i_mard TYPE STANDARD TABLE OF t_mard.
" Mai related declarations
"Variables
DATA :
g_sent_to_all TYPE sonv-flag,
g_tab_lines TYPE i.
"Types
TYPES:
t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1,
t_pdf TYPE tline.
"Workareas
DATA :
w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers,
w_pdf TYPE t_pdf.
"Internal Tables
DATA :
i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers,
i_pdf TYPE STANDARD TABLE OF t_pdf.
PARAMETERS:
p_mai_id(99) TYPE c.
*& Start-of-selection.
START-OF-SELECTION.
GET pernr.
PERFORM get_data.
PERFORM show_smartform.
*& End-of-selection.
END-OF-SELECTION.
*& Form get_data
FORM get_data .
rp-provide-from-last p0000 space pn-begda pn-endda.
rp-provide-from-last p0001 space pn-begda pn-endda.
rp-provide-from-last p0002 space pn-begda pn-endda.
MOVE-CORRESPONDING: p0000 TO w_emp_info,
p0001 TO w_emp_info,
p0002 TO w_emp_info.
SELECT matnr werks labst
FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard.
ENDFORM. " get_data
*& Form show_smartform
FORM show_smartform .
DATA :
l_sform_name TYPE tdsfname,
l_fm_name TYPE rs38l_fnam.
DATA :
l_sf_control TYPE ssfctrlop,
l_sf_options TYPE ssfcompop.
DATA: i_otf LIKE itcoo OCCURS 100 WITH HEADER LINE.
* i_pdf LIKE tline OCCURS 100 WITH HEADER LINE.
DATA: op_option TYPE ssfctrlop,
job_output TYPE ssfcrescl.
* op_option-getotf = 'X'.
l_sform_name = 'ZVENKAT_SMARTFORM'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = l_sform_name
IMPORTING
fm_name = l_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION l_fm_name
EXPORTING
control_parameters = op_option
output_options = l_sf_options
w_emp_info = w_emp_info
IMPORTING
* DOCUMENT_OUTPUT_INFO =
job_output_info = job_output
TABLES
p0006 = p0006
p0022 = p0022
p0023 = p0023
i_mard = i_mard.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
TABLES
otf = job_output-otfdata
lines = i_pdf.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM send_mai.
ENDIF.
ENDFORM. " show_smartform
*& Form send_mai
FORM send_mail .
"Subject of the mai.
w_document_data-obj_name = 'MAI_TO_HEAD'.
w_document_data-obj_descr = 'Regarding Mai Program by SAP ABAP'.
"Body of the mai
PERFORM build_body_of_mai
USING:space,
'Hi,',
'I am fine. How are you? How are you doing ? ',
'This program has been created to send simple mai',
'with Subject,Body with Address of the sender. ',
'Regards,',
'Venkat.O,',
'SAP HR Technical Consultant.'.
"Write Packing List for Body
DESCRIBE TABLE i_body_msg LINES g_tab_lines.
w_packing_list-head_start = 1.
w_packing_list-head_num = 0.
w_packing_list-body_start = 1.
w_packing_list-body_num = g_tab_lines.
w_packing_list-doc_type = 'RAW'.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Write Packing List for Attachment
w_packing_list-transf_bin = 'X'.
w_packing_list-head_start = 1.
w_packing_list-head_num = 1.
w_packing_list-body_start = 1.
DESCRIBE TABLE i_attachment LINES w_packing_list-body_num.
w_packing_list-doc_type = 'PDF'.
w_packing_list-obj_descr = 'PDF Attachment'.
w_packing_list-obj_name = 'PDF_ATTACHMENT'.
w_packing_list-doc_size = w_packing_list-body_num * 255.
APPEND w_packing_list TO i_packing_list.
CLEAR w_packing_list.
"Fill the document data and get size of attachment
w_document_data-obj_langu = sy-langu.
READ TABLE i_attachment INTO w_attachment INDEX g_tab_lines.
w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( w_attachment ).
"Receivers List.
w_receivers-rec_type = 'U'. "Internet address
w_receivers-receiver = p_mai_id. "here mai Id should be given
w_receivers-com_type = 'INT'.
w_receivers-notif_del = 'X'.
w_receivers-notif_ndel = 'X'.
APPEND w_receivers TO i_receivers .
CLEAR:w_receivers.
"Function module to send mai to Recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_document_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = g_sent_to_all
TABLES
packing_list = i_packing_list
contents_bin = i_attachment
contents_txt = i_body_msg
receivers = i_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0 .
MESSAGE i303(me) WITH 'Mai has been Successfully Sent.'.
ELSE.
WAIT UP TO 2 SECONDS.
"This program starts the SAPconnect send process.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ENDFORM. " send_mai
*& Form build_body_of_mai
* text
* -->L_MESSAGE text
FORM build_body_of_mai USING l_message.
w_body_msg = l_message.
APPEND w_body_msg TO i_body_msg.
CLEAR w_body_msg.
ENDFORM. " build_body_of_mai
I hope that it helps u .
Regards,
Venkat.O -
Converting smartforms output into PDF
Hi ALL,
How to convert the smartforms output into PDF based form. After executing the form, it should directly open in PDF. How to do this?
Points will be awarded.
Thanks and regards,
vinoth.Hi Vinoth Kumar,
Please go throuh the below procedure and sample Code, this might help you.
Procedure
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
variant = ' '
direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
Hope this resolves your query.
Reward all the helpful answers.
Regards
calling the generated function module
call function fm_name
exporting
archive_index =
archive_parameters =
control_parameters = cparam
mail_appl_obj =
mail_recipient =
mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
document_output_info =
job_output_info = tab_otf_data
job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
ENDIF. -
To send smartform output in an email without attachment
Hi All,
How to send smartform output in an email without attachment?
Thanks & Regards,
Mamta Gupta.Try this,
DATA:
ls_control_param TYPE ssfctrlop, "Control paramters
ls_output_options TYPE ssfcompop. "Output options
DATA:
lv_ip_mailaddr TYPE so_name, "Address of a Mail Recipient
lv_ip_type_id TYPE so_escape, "Recipient type
ls_recipient_id TYPE swotobjid, "Structure for recvr obj ID
ls_sender_id TYPE swotobjid. "Structure for sender obj id
CONSTANTS:
lc_ip_type_id TYPE so_escape VALUE 'U', "For internet address.
lc_smartform TYPE tdsfname VALUE 'ZVSF_ASN_DELNOTE', "Smart form name
lc_mail TYPE tddevice VALUE 'MAIL'. "Mail device
Assign recipient
lv_ip_mailaddr = gv_smtp_addr. "CSAM email id
lv_ip_type_id = lc_ip_type_id. "External address
Create Mail title
CONCATENATE text-001
nast-objky
INTO ls_output_options-tdtitle.
Create recipient object
CALL FUNCTION 'CREATE_RECIPIENT_OBJ_PPF'
EXPORTING
ip_mailaddr = lv_ip_mailaddr
ip_type_id = lv_ip_type_id
IMPORTING
ep_recipient_id = ls_recipient_id
EXCEPTIONS
invalid_recipient = 1
OTHERS = 2.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Get sender object id.
CALL FUNCTION 'CREATE_SENDER_OBJECT_PPF'
EXPORTING
ip_sender = sy-uname
IMPORTING
ep_sender_id = ls_sender_id
EXCEPTIONS
invalid_sender = 1
OTHERS = 2.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Assign the smart form name
w_ssfname = lc_smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_ssfname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
For Print output:
IF nast-nacha = '1'. "Print output
ls_control_param-preview = 'X'.
ls_control_param-no_dialog = 'X'.
ENDIF.
For Email output.
IF nast-nacha = '2'. "Email
Output options
ls_output_options-tdteleland = gs_kna1-land1.
ls_output_options-tdtelenum = gs_kna1-telfx.
ls_output_options-tdfaxuser = sy-uname.
ls_output_options-BCS_COMMIT = 'X'.
ls_control_param-device = lc_mail.
ENDIF.
dynamically call Fm behind the Smart form
CALL FUNCTION lf_fm_name
EXPORTING
control_parameters = ls_control_param
mail_recipient = ls_recipient_id
mail_sender = ls_sender_id
output_options = ls_output_options
user_settings = ' '
TABLES
delivery = gt_delivery
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc 0.
cf_retcode = sy-subrc.
PERFORM protocol_update.
ENDIF.
Regards,
Joan -
Produce smartform output in word doc
I want to get my smartform output in a word doc instead of PDF. I've gone thorough the previous threads for the same thing but couldn't find any exact solution. can anyone tell me how this is to be done?
<promise removed by moderator>
Moderator message: please do more research before asking.
Edited by: Thomas Zloch on Apr 13, 2011 3:26 PMHi yogesh.,
There is no standard possibility to do Word outputs in SAP.
you can do manually..
After the print preview, Select the menu Goto->List Display.
Now select the menu System->List->Save->Local File.
Now you can select the radio buttion Rich Text Format.
Now you save the document as a .doc file (say test.doc)
That is it!!!!!
Anyway you can develop connection of Mail-merge technology of Microsoft and SAP ABAP class i_oi_document_proxy.
http://help.sap.com/saphelp_sm32/helpdata/EN/e9/0be980408e11d1893b0000e8323c4f/content.htm
with interface get_mail_merge_interface:
http://help.sap.com/saphelp_sm32/helpdata/en/6e/8fc2e3dd0d11d2bdba080009b4534c/content.htm
Refer this use ful link for word output
http://www.sap2word.de/abap.html
hope this helps.,
Thanks & Regards
Kiran
Moderator message: copy/pasted from several sources, please do not repeat if you want to keep your user ID!
http://www.google.com/search?q=%22Aftertheprintpreview%2CSelectthemenu+Goto%22&hl=en&source=hp&lr=&aq=f&aqi=&aql=&oq=
http://www.google.com/search?hl=en&source=hp&q=%22AnywayyoucandevelopconnectionofMail-merge%22&meta=lr%3D&aq=f&aqi=&aql=&oq=
Edited by: Thomas Zloch on Apr 13, 2011 3:35 PM
Maybe you are looking for
-
Bloqueando o Preço Unitario mas liberando o % de desconto...
Boa tarde a todos, Sou iniciante e estou com a seguinte dúvida. Eu sei que no B1 existe a possibilidade estar bloqueando a edição de linhas pra não permitir que o usuário altere seus valores, mas no caso estou querendo liberar o acesso ao usuário no
-
How to set a parameter to sysdate() - 1 in the scheduler?
Hi, I have a report with two parameters. One is the date and in the parameter's definition I have set it to {$SYSDATE()-1$} which works perfectly. However, when I try to schedule the report, it does not accept the default above. How can I schedule a
-
Hello people, I think I have a basic question for you... I have may vendors defined in R3 in some Purchasing Organizations. And I have to transfer this information to EBP. I know I can use BBPUPDVD to update the vendors catalog in EBP from R3. If thi
-
Is my iWeb site capable of online retail?
Is it possible for iWeb to make your site capable of conducting sales? If so, how? Just finished the design phase and this would be the next step. Assuming PayPal but not sure how to proceed?
-
Is there a street view on maps?
Is there a street view on maps?