Smartform output to be sent as pdf when billing document is saved(VF01)
Hello all,
I`m facing a problem in transaction VF01.The requirement is,when user will save the newly created billing document in VF01 transaction ,the corresponding smartform (attached to respective output type ) should be converted and sent as pdf to ship-to party e-mail address.
I`ve done the coding so that smartform is converted and sent through transaction VF02/VF03.
But I`m facing problem in understanding how the program is automatically triggered when billing document is created.In VF02/VF03 it can be understood that on "Issue output To" and selecting respective output type,driver program is triggered and processing starts for mentioned routine in NACE.
waiting for your valuable inputs...
I hope process will go like this...
1) when you use VF01 / VF02 & save, automatically RSNAST00 standard program will be triggered.
2) This program will fetch the driver program & form from NACE transaction & it will execute the driver program.
Similar Messages
-
Send Mail alert to customer when billing document is created
Hi experts,
My requirement is to send email alert to customers when billing document is saved.( in transaction VF01 ).
I don't want to send any pdf format. I just want to intimate customer that the invoice is created.
Searched forum and tried all possible ways. Please send the steps to configure the same.
Request your valuable suggestions in this regard ASAP.
Thanks in Advance.
Regards,
Farha.Hi,
It is also similar to sending the PDF document through email.
But in your case, it becomes easy. The program should take only the invoice number and send the invoice number through email to the desired email address.
You have to configure the output type as normal as any other email output type.
The logic has to be defined in the program.
So there is no difference at the functional consultant level, the technical consultant should accordingly write the code to just send the invoice number. -
Accounting document not cleared when billing document is cancelled.
Hi,
In ECC 6.0 when we cancel a billing document through vf11 in vfo3 we find the status as accounting document not cleared.
The general process is manually going to f-23 and clear customer line items of that invoice. After doing this the status become accounting documet is cleared.
My requirement is how to cancel the billing document without getting this message (accounting document not cleared) and not clearing the customer line items manually.
Can it be done through user exit/enhancement or by copying requirement vofm.
Please suggest.
Thanks
Edited by: sumesh on Jul 29, 2009 6:33 PMThey directly want the accounting document to
be cleared when billing document is cancelled.
Though you can achieve this with the help of ABAPer, why dont you consider having a Posting block for your billing type so that as and when the billing documents are generated, you can release it via VFX3 in bulk or VF02 for individual billing document release to FI.
In order to achieve this, go to VOFA, select your billing type and execute. There you can see a field "Posting block" where maintain a tick there and save. With this control, first of all, you can ensure that before releasing F2 billing documents to FI, it is not cancelled.
thanks
G. Lakshmipathi -
Extract & Store pdf SD billing document from archivelink content Repository
Hello friends,
Can some one give me a hint on this :
I have a requirement to create a program which will extract the pdf SD billing document from archivelink content Repository and will save pdf files on application servers's directory.
We have business Object, Content Repository ID, Document type know for this.
thanks
ashishuse FM : ARCHIVOBJECT_GET_TABLE to get the content in bin format..
then use open dataset, transfer dataset, close dataset to store that in OS level.. task done..
you can even use GUI_DOWNLOAD if you want to download it to presentation server. -
Media file (quicktime) not playing when Pages document is saved as a pdf
I added a quicktime file (a movie trailer) to my presentation and it plays when in Pages - but when I export it to a pdf it is just a black space. 1. are these links/media files are supposed to be active when in a pdf format 2. how can I get the media file to play when it is saved as a pdf? 3. Will those who I email it to be able to play the media file when they open it up on their computer?
thanks so much in advance - I am under a tight deadline so any help would be appreciated!Multimedia is not embedded in exported .pdf files.
You will need to relink them again in the .pdf using Adobe Acrobat Pro.
Peter -
Mac OS X Lion 10.7.5
15" = 2 fans, left & right. HDD in lower-right corner. See here for component placement (click on appropriate model, choose the fan guides): http://www.ifixit.com/Device/MacBook_Pro_15%22
Replacement fan: $60 + shipping. 13 screws altogether.
Determine which one with Old Mechanic's Trick: get a solid metal rod of adequate length 3/16"-1/4" dia., place one end against the bony area next to your good ear and move the other end against different spots on the Mac's body to determine exactly where the noise comes from.
Or replace both to be safe.
99% sure it is a fan.
P.S.: Must Replace Bad Fan. If it fails, MBP can overheat and get permanently damaged. Not User Serviceable. -
How to download a smartform output as excel file WITH EXACT LAYOUT.
Hi,
I have searched the forum but could not found any satisfactory answer. I have a smartform with a table, some texts and a logo. I have to write a code which will save the smartform output as excel file in the system keeping the layout of the smartform output EXACT.
i.e., the excel file will contain the output with EXACTLY THE SAME layout as would have been for a pdf file (if the smartform output is converted to a pdf file) and the client can then edit the fields of the table in the excel file. How can I achieve this? Please give a suggestion.. Thanks in advance.Hi Anirban,
Your Requirement is to download a smartform to microsoft Excel .
Well unfortunately we can only download data into excel which is in a tabular format i.e stored in internal tables we have function modules to do the same even u can do that using OLE2.
If u try to download a smartform to Excel only format supported will be ASCII, if u will continue with that the smartforms text's will get downloaded to excel but whole data would be downloaded in a single Cell.
Code to do the same is -
>>>>
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = v_language
i_application = 'SAPDEFAULT'
IMPORTING
e_devtype = v_e_devtype.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = w_form
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = w_fmname
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE E002(zcpm) WITH 'Smartform call fails'.
ENDIF.
wa_outopt-tdprinter = v_e_devtype.
wa_ctrlop-no_dialog = 'X'.
wa_ctrlop-getotf = 'X'.
CALL FUNCTION w_fmname "'/1BCDWB/SF00000025'
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = WA_CTRLOP
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = WA_OUTOPT
* USER_SETTINGS = ' '
IMPORTING
* DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = T_OTFDATA
* JOB_OUTPUT_OPTIONS =
* document_output_info = st_document_output_info
* job_output_info = st_job_output_info
* job_output_options = st_job_output_options
TABLES
T_FINAL = T_FINAL
T_ZSDT_WAGONS = T_ZSDT_WAGONS_1
T_QTY = T_QTY
T_QTY1 = T_QTY1
T_CON1 = T_CON1
T_CON2 = T_CON2
"T_ZTMM_OUTWB_TXN = T_ZTMM_OUTWB_TXN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
T_OTF[] = T_OTFDATA-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'ASCII'
max_linewidth = 132
* ARCHIVE_INDEX = ' '
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if tabix_m = 1.
*CALL METHOD cl_gui_frontend_services=>file_save_dialog
*CHANGING
*filename = w_FILE_NAME
*path = w_FILE_PATH
*fullpath = w_FULL_PATH
** USER_ACTION =
** FILE_ENCODING =
*EXCEPTIONS
*CNTL_ERROR = 1
*ERROR_NO_GUI = 2
*NOT_SUPPORTED_BY_GUI = 3
*others = 4
*IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
CALL function 'TMP_GUI_BROWSE_FOR_FOLDER'
EXPORTING
WINDOW_TITLE = 'Select A File Folder'
INITIAL_FOLDER = 'C:\'
IMPORTING
SELECTED_FOLDER = W_PATH.
endif.
CONDENSE W_PATH.
concatenate W_PATH '\' wa_final-vbeln '.XLS' into w_FULL_PATH.
****************************************************************************Saving the PDF file on to Application server************************
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = w_bin_filesize
FILENAME = w_FULL_PATH
FILETYPE = 'BIN'
* APPEND = ' '
* WRITE_FIELD_SEPARATOR = ' '
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = w_filesize
TABLES
DATA_TAB = t_pdf_tab
* FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
As u said ,u want to download a smartform to Excel it could be done but only if u r using a internal table and exactly printing line by line values in the smartform, But if u are performing calculation in between, using multiple internal table Work areas, structures, etc i.e if whole smartform is developed with many distributed windows , unfortunately it wont be possible to download a smartform to excel in such cases, because the whole output comes from multiple internal tables, calculations, etc all the data is not printed in a tabular manner so in such a case it would be just impossible to download the smartform to excel.
But we definitely have a workaround which could be done to download the data into excel.
you can develop a ALV report with a header and footer u can define the header and footer of the alv according to the smartform and the middle portion would contain the tabular kind of data which u must be using as Smartform table to print the same.
So if u have a similar kind of smartform with some header data, tabular data, and some footer data, then u can use ALV to do the same thing , advantage with ALV would be that u can easily download the same into excel.
Other alternative is that u can Convert and download the smartform to PDF and copy the same to an Excel wooksheet.
These are all the possibilities with which u can do the same.
Regards,
Akash Rana -
Output is not coming for a specific billing documnet no
Hi,
I am not able to get the out put of a smartform for a specific billing document number.For othe documents output is coming.
For that specific billing document no ,the field are showing '#' mostly.Evenif i am not giving any conditions then also its showing
#.Its not showing the output for the page no even.
Can u please suggest something..
Thanks.Try to debug the smartform.
Put a break point in the smartform and then try to execute. check for the value. Check it out. -
GL account posting when billing doc saved
Hi to all,
Please make sure the term. How GL account posting when billing document saved or it release to accounting?
Thanks.Hi,
If your question is how the GLs are picked up while the billing doc is released to accounting, then-
GL accounts are derived from the automatic account determination maintained at VKOA.
Regards,
Mike -
When billing doc is reversed what the impact in FI
Dear SAP Experts,
I want to know the impact in FI when the below scenario are covered.
1. When PGI is reversed
2. When billing doc is reversed (Accounting Doc not Cleared)
3. When billing doc is reversed (Accouring Doc is cleared)
Regards.Dear:
Please follow
1...When PGI is reversed Cost of goods sold is credited and Finished goods are debited since the stock it received back into storage location i-e
Finished Goods Dr
COGS CR
2....When billing document is reversed the customer gets credited and all duties along with sales and duties are debited i-e
Sales Dr
Tax Payable Dr
Customer Cr( because his o/s balance is reduced to the extent of reversal)
3.... When billing document that is already cleared is reversed then many things get open
Customer payments for the invoice amount and its clearing will need to be reversed too.
I mean
For payment reversal of cleared invoice using FBRA
Customer Dr
Bank Cr
And subsequently reversing invoice
Sales Dr
Customer Cr
Regards -
Error "number out of range" in pdf sent through mail using smartform output
Hi Experts,
We have a program which sends mail using smartform output in 'PDF' format. We are able to preview smartform correctely in SAP and mail is also getting sent fine with attachment of form as PDF document. But, when we try to open the document, it gives error saying 'Number out of range'. Also, not all of the windows of smartform are appearing in document and some are coming only half.
We are not able to find out the reason for this. Any help would be appriciated.
Gouri.Hello,
How did you solve this one? We are facing the same problem in ECC6.0.
Thanks in advance,
Benjamin de Rijke -
Convert the smartform output to PDF when giving print from vf31
Hi Gurus,
I am facing one problem.I developed the program to chnage smartform output to PDF file when giving invoice print from VF02/VF03.
The same functionality i want to appy when i am giving print for the invoice through VF31.
I put the break-point in the driver program.But it is not stopping there when i am giving print from VF31.
How can i do this one..
Please Help Me.
Thanks &Regards,
R.P.SastryWhich Program you are putting the Breakpoint?
-
Smartform Output To PDF And Send It As External Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file,it is giving error that FILE IS DAMAGED
So please suggest a solution.
Regards,
BhaveshREPORT ZTEST_PDF_MAIL.
Internal Table declarations
PARAMETERS : p_ebeln TYPE ekko-ebeln DEFAULT '4500000003'.
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
DATA:it_pdfdata TYPE TABLE OF tline.
DATA:it_pdf TYPE TABLE OF solisti1.
BREAK-POINT .
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_MM_PO_ORIGINAL'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
P_EBELN = P_EBELN
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = 'XYZ'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF. -
PDF Conversion of Smartform Output
Hi All,
Requirement : Be able to provide customers with reprinting old invoices.
As Is : We have a standard way of doing it by reissuing a print of the Invoice by going into transaction VF02. But in doing so we have a chance that if some master data changes for that customer or the material those changes will get reflected in the new smartform output.
To Be : We want to be able to exactly reproduce the invoice which was sent out at the time of invoice creation, what I mean to say is on initial issue of the print output, is there any way we can store that output(may be as raw data) and retrieve it and issue a print at a later stage.
Any help in this regard would be greatly appreciated.
Karthikhi
check this link...it will help you
https://www.sdn.sap.com/irj/scn/advancedsearch?query=sendalvtomailas+pdf&cat=sdn_all
or
REPORT zsuresh_test.
Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
W_bin_filesize TYPE i, " Binary File Size
w_FILE_NAME type string,
w_File_path type string,
w_FULL_PATH type string.
Internal tables declaration
Internal table to hold the OTF data
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data recd from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
This function module call is used to retrieve the name of the Function
module generated when the SMARTFORM is activated
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Calling the SMARTFORM using the function module retrieved above
GET_OTF parameter in the CONTROL_PARAMETERS is set to get the OTF
format of the output
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
" for print preview
w_cparam-getotf = 'X'.
Printer name to be used is provided in the export parameter
OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
CALL FUNCTION w_fmodule
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = w_cparam
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = w_outoptions
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_otf[] = t_otf_from_fm-otfdata[].
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = T_pdf_tab
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Ansumesh -
Send Smartforms Output as pdf Attachment in E-Mail
Hi!
I've searched quite a long time and tried to use different examples I've found in the forum but it doesn't work for me.
I tried to do the following:
Send output of smartforms by mail to a specified e-mail adress. Sometimes there have to be sent 2 pdf's (both are output of smartforms) in one e-mail.
The function to download the output of smartform with FM CONVERT_OTF_2_PDF and GUI_DOWNLOAD works fine for me but I couldn't get the FM SO_NEW_DOCUMENT_SEND_API1 to work.
Can someone give me an example or a description to get from the output of the smartform to the e-mail with attachment?
I'm pretty new to this so it maybe is a very simple question.
Regards,
JackoTry the following code
report zpp430_report_in_pdf no standard page heading line-size 255.
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
tables: tsp01.
parameter: p_email1 like somlreci1-receiver.
p_sender like somlreci1-receiver.
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132', " Paper Format
p_slset like sy-slset, "Variant name
p_odescr like sodocchgi1-obj_descr,
p_adescr type so_obj_nam,
p_delspl as checkbox.
*DATA DECLARATION
data: gd_recsize type i.
* Spool IDs
types: begin of t_tbtcp.
include structure tbtcp.
types: end of t_tbtcp.
data: it_tbtcp type standard table of t_tbtcp initial size 0,
wa_tbtcp type t_tbtcp.
* Job Runtime Parameters
data: gd_eventid like tbtcm-eventid,
gd_eventparm like tbtcm-eventparm,
gd_external_program_active like tbtcm-xpgactive,
gd_jobcount like tbtcm-jobcount,
gd_jobname like tbtcm-jobname,
gd_stepcount like tbtcm-stepcount,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
data: w_recsize type i,
mc_valid(1) type c.
data: gd_subject like sodocchgi1-obj_descr,
it_mess_bod like solisti1 occurs 0 with header line,
it_mess_att like solisti1 occurs 0 with header line,
gd_sender_type like soextreci1-adr_typ,
gd_attachment_desc type so_obj_nam,
gd_attachment_name type so_obj_des,
mi_rqident like tsp01-rqident.
* Spool to PDF conversions
data: gd_spool_nr like tsp01-rqident,
w_spool_nr like tsp01-rqident,
gd_destination like rlgrap-filename,
gd_bytecount like tst01-dsize,
gd_buffer type string.
data:
mstr_print_parms like pri_params.
* Binary store for PDF
data: begin of it_pdf_output occurs 0.
include structure tline.
data: end of it_pdf_output.
constants: c_dev like sy-sysid value 'DEV',
c_no(1) type c value ' ',
c_device(4) type c value 'LOCL'.
*START-OF-SELECTION.
start-of-selection.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
* WRITE 'Hello World'.
* NEW-PAGE.
* COMMIT WORK.
* NEW-PAGE PRINT OFF.
* IF SY-BATCH EQ 'X'.
* PERFORM GET_JOB_DETAILS.
* PERFORM OBTAIN_SPOOL_ID.
*** Alternative way could be to submit another program and store spool
*** id into memory.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
call function 'GET_PRINT_PARAMETERS'
exporting
authority = space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
* in_archive_parameters = space
* in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog = 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
spool parameters mstr_print_parms
using selection-set p_slset
and return.
* Get spool id from program called above
perform get_spool_number using sy-repid sy-uname changing mi_rqident.
* IMPORT w_spool_nr FROM MEMORY ID SY-REPID.
perform convert_spool_to_pdf.
perform process_email.
if p_delspl eq 'X'.
perform delete_spool.
endif.
if sy-sysid = c_dev.
wait up to 5 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
* ELSE.
* SKIP.
* WRITE:/ 'Program must be executed in background in-order for spool'
* 'request to be created.'.
* ENDIF.
* FORM obtain_spool_id *
form obtain_spool_id.
check not ( gd_jobname is initial ).
check not ( gd_jobcount is initial ).
select * from tbtcp
into table it_tbtcp
where jobname = gd_jobname
and jobcount = gd_jobcount
and stepcount = gd_stepcount
and listident <> '0000000000'
order by jobname
jobcount
stepcount.
read table it_tbtcp into wa_tbtcp index 1.
if sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
message s004(zdd) with gd_spool_nr.
else.
message s005(zdd).
endif.
endform. "OBTAIN_SPOOL_ID
* FORM get_job_details *
form get_job_details.
* Get current job details
call function 'GET_JOB_RUNTIME_INFO'
importing
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
exceptions
no_runtime_info = 1
others = 2.
endform. "GET_JOB_DETAILS
* FORM convert_spool_to_pdf *
form convert_spool_to_pdf.
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = mi_rqident
no_dialog = c_no
dst_device = c_device
importing
pdf_bytecount = gd_bytecount
tables
pdf = it_pdf_output
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
check sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
loop at it_pdf_output.
translate it_pdf_output using ' ~'.
concatenate gd_buffer it_pdf_output into gd_buffer.
endloop.
translate gd_buffer using '~ '.
do.
it_mess_att = gd_buffer.
append it_mess_att.
shift gd_buffer left by 255 places.
if gd_buffer is initial.
exit.
endif.
enddo.
endform. "CONVERT_SPOOL_TO_PDF
* FORM process_email *
form process_email.
describe table it_mess_att lines gd_recsize.
check gd_recsize > 0.
perform send_email using p_email1.
* perform send_email using p_email2.
endform. "PROCESS_EMAIL
* FORM send_email *
* --> p_email *
form send_email using p_email.
check not ( p_email is initial ).
refresh it_mess_bod.
* Default subject matter
gd_subject = p_odescr.
gd_attachment_desc = p_adescr.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'This is an automated report from SAP.'.
append it_mess_bod.
it_mess_bod = 'Please do not reply to this mail id.'.
append it_mess_bod.
*IT_MESS_BOD = 'For any clarification on the details of this report'
* APPEND IT_MESS_BOD.
* IT_MESS_BOD = 'please contact Business Planning. Thank you'.
* APPEND IT_MESS_BOD.
* If no sender specified - default blank
if p_sender eq space.
gd_sender_type = space.
else.
gd_sender_type = 'INT'.
endif.
* Send file by email as .xls speadsheet
perform send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
p_odescr
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
endform. "SEND_EMAIL
* FORM delete_spool *
form delete_spool.
data: ld_spool_nr type tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
check p_delspl <> c_no.
call function 'RSPO_R_RDELETE_SPOOLREQ'
exporting
spoolid = ld_spool_nr.
endform. "DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
describe table t_attachment lines t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
importing
sent_to_all = w_sent_all
tables
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form GET_SPOOL_NUMBER
* text
* -->P_SY_REPID text
* -->P_SY_UNAME text
* <--P_MI_RQIDENT text
form get_spool_number using f_repid
f_uname
changing f_rqident.
data:
lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(9)
f_uname+0(3)
into lc_rq2name.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform. " GET_SPOOL_NUMBER
there are lot's of posts available on sdn which u can refer to.
tx
ashwa
Maybe you are looking for
-
Nqs error 59001: Binary logical operation error in OBIEE 11g
Hi, Requirement: Need to calculate YTD for invoiced amount and Prior YTD for invoiced amount and last year total invoiced amount. Logic we used: For YTD Invoiced amount we used "Year To Date" time series function in rpd. For Prior YTD we used "Ago fu
-
Debit and credit entry of items in repair order after DP90
Dear All, From the repair order we create a service order, followed by operations and components in service order. We do a DP90 after completing the service order and see that there are entries for in repair order. Once again we go back to service or
-
Fusion middleware 11g installation steps
Hello, I am trying to install Oracle Fusion Middleware 11g and found some of the binaries to be installed.Please let me know if these are the software needed and Also, please confirm which product needs to be installed first. Here, is what my guessin
-
How to retrieve xml file from BLOB and display on browser with css/xslt
Hi All, I am new to xml. I am storing my xml file into BLOB in database. Now in my jsp page I want to retrieve this xml file from BLOB and display in HTML/CSS/XSLT form... Pl. guide me.. any docs..?? Logic...?? Thanks in Advance. Sandeep Oza
-
Do we have the provision to poll the coherence server?
hi, Do we have the provision to poll the coherence server for a particular type of object. Suppose if I have a structure Sample. Can I register the struct Sample with coherence server and let me know when ever it got inserted into the DB? I am seeing