Smartforms display and email functionality

Hi all!
Can i convert smartforms into pdf, and then send to particular recipient while at the same time the smartforms can be displayed on screen?
My problem right now is when i set my smartforms to be converted to pdf, e.i. ctrlparam-getotf = X, the smartforms is converted into PDF and is sent to the recipient but won't be displayed on screen, it just came back to the selection-screen.
And when i comment-out ctrlparam-getotf = 'X', the smartforms is displayed on screen but it wasn't converetd into PDF and is not emailed to its recipient.
I wan't  this 2 functionality to be working together. How will it be done?
Thanks.

Hi navi,
You can't show the forms and screen and convert it as PDF at the same time .
You must do the process 2 times.
Best regards.

Similar Messages

  • PDF and Email Functionality

    Hi all
    Please guide me how to send smartform as an attachment through email.and the attachment should be PDF. I am new to this kind of thing. please guid me step wise.
    regards
    Pkumar

    Hi,
    Check this prog...
    *& Report ZSPOOLTOPDF *
    *& Converts spool request into PDF document and emails it to *
    *& recipicant. *
    *& Execution *
    *& This program must be run as a background job in-order for the write *
    *& commands to create a Spool request rather than be displayed on *
    *& screen *
    REPORT zspooltopdf.
    PARAMETER: p_email1 LIKE somlreci1-receiver
    DEFAULT '[email protected]',
    p_sender LIKE somlreci1-receiver
    DEFAULT '[email protected]',
    p_delspl AS CHECKBOX.
    *DATA DECLARATION
    DATA: gd_recsize TYPE i.
    Spool IDs
    TYPES: BEGIN OF t_tbtcp.
    INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
    wa_tbtcp TYPE t_tbtcp.
    Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
    gd_eventparm LIKE tbtcm-eventparm,
    gd_external_program_active LIKE tbtcm-xpgactive,
    gd_jobcount LIKE tbtcm-jobcount,
    gd_jobname LIKE tbtcm-jobname,
    gd_stepcount LIKE tbtcm-stepcount,
    gd_error TYPE sy-subrc,
    gd_reciever TYPE sy-subrc.
    DATA: w_recsize TYPE i.
    DATA: gd_subject LIKE sodocchgi1-obj_descr,
    it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    gd_sender_type LIKE soextreci1-adr_typ,
    gd_attachment_desc TYPE so_obj_nam,
    gd_attachment_name TYPE so_obj_des.
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
    gd_destination LIKE rlgrap-filename,
    gd_bytecount LIKE tst01-dsize,
    gd_buffer TYPE string.
    Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
    INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
    c_no(1) TYPE c VALUE ' ',
    c_device(4) TYPE c VALUE 'LOCL'.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Write statement to represent report output. Spool request is created
    if write statement is executed in background. This could also be an
    ALV grid which would be converted to PDF without any extra effort
    WRITE 'Hello World'.
    new-page.
    commit work.
    new-page print off.
    IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    Alternative way could be to submit another program and store spool
    id into memory, will be stored in sy-spono.
    *submit ZSPOOLTOPDF2
    to sap-spool
    spool parameters %_print
    archive parameters %_print
    without spool dynpro
    and return.
    Get spool id from program called above
    IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
    PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
    wait up to 5 seconds.
    SUBMIT rsconn01 WITH mode = 'INT'
    WITH output = 'X'
    AND RETURN.
    ENDIF.
    ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
    'request to be created.'.
    ENDIF.
    FORM obtain_spool_id *
    FORM obtain_spool_id.
    CHECK NOT ( gd_jobname IS INITIAL ).
    CHECK NOT ( gd_jobcount IS INITIAL ).
    SELECT * FROM tbtcp
    INTO TABLE it_tbtcp
    WHERE jobname = gd_jobname
    AND jobcount = gd_jobcount
    AND stepcount = gd_stepcount
    AND listident <> '0000000000'
    ORDER BY jobname
    jobcount
    stepcount.
    READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
    IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
    ELSE.
    MESSAGE s005(zdd).
    ENDIF.
    ENDFORM.
    FORM get_job_details *
    FORM get_job_details.
    Get current job details
    CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
    IMPORTING
    eventid = gd_eventid
    eventparm = gd_eventparm
    external_program_active = gd_external_program_active
    jobcount = gd_jobcount
    jobname = gd_jobname
    stepcount = gd_stepcount
    EXCEPTIONS
    no_runtime_info = 1
    OTHERS = 2.
    ENDFORM.
    FORM convert_spool_to_pdf *
    FORM convert_spool_to_pdf.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
    src_spoolid = gd_spool_nr
    no_dialog = c_no
    dst_device = c_device
    IMPORTING
    pdf_bytecount = gd_bytecount
    TABLES
    pdf = it_pdf_output
    EXCEPTIONS
    err_no_abap_spooljob = 1
    err_no_spooljob = 2
    err_no_permission = 3
    err_conv_not_possible = 4
    err_bad_destdevice = 5
    user_cancelled = 6
    err_spoolerror = 7
    err_temseerror = 8
    err_btcjob_open_failed = 9
    err_btcjob_submit_failed = 10
    err_btcjob_close_failed = 11
    OTHERS = 12.
    CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
    LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
    ENDLOOP.
    TRANSLATE gd_buffer USING '~ '.
    DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
    EXIT.
    ENDIF.
    ENDDO.
    ENDFORM.
    FORM process_email *
    FORM process_email.
    DESCRIBE TABLE it_mess_att LINES gd_recsize.
    CHECK gd_recsize > 0.
    PERFORM send_email USING p_email1.
    perform send_email using p_email2.
    ENDFORM.
    FORM send_email *
    --> p_email *
    FORM send_email USING p_email.
    CHECK NOT ( p_email IS INITIAL ).
    REFRESH it_mess_bod.
    Default subject matter
    gd_subject = 'Subject'.
    gd_attachment_desc = 'Attachname'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
    it_mess_bod = 'Message Body text, line 1'.
    APPEND it_mess_bod.
    it_mess_bod = 'Message Body text, line 2...'.
    APPEND it_mess_bod.
    If no sender specified - default blank
    IF p_sender EQ space.
    gd_sender_type = space.
    ELSE.
    gd_sender_type = 'INT'.
    ENDIF.
    Send file by email as .xls speadsheet
    PERFORM send_file_as_email_attachment
    tables it_mess_bod
    it_mess_att
    using p_email
    'Example .xls documnet attachment'
    'PDF'
    gd_attachment_name
    gd_attachment_desc
    p_sender
    gd_sender_type
    changing gd_error
    gd_reciever.
    ENDFORM.
    FORM delete_spool *
    FORM delete_spool.
    DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
    ld_spool_nr = gd_spool_nr.
    CHECK p_delspl <> c_no.
    CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
    EXPORTING
    spoolid = ld_spool_nr.
    ENDFORM.
    *& Form SEND_FILE_AS_EMAIL_ATTACHMENT
    Send email
    FORM send_file_as_email_attachment tables it_message
    it_attach
    using p_email
    p_mtitle
    p_format
    p_filename
    p_attdescription
    p_sender_address
    p_sender_addres_type
    changing p_error
    p_reciever.
    DATA: ld_error TYPE sy-subrc,
    ld_reciever TYPE sy-subrc,
    ld_mtitle LIKE sodocchgi1-obj_descr,
    ld_email LIKE somlreci1-receiver,
    ld_format TYPE so_obj_tp ,
    ld_attdescription TYPE so_obj_nam ,
    ld_attfilename TYPE so_obj_des ,
    ld_sender_address LIKE soextreci1-receiver,
    ld_sender_address_type LIKE soextreci1-adr_typ,
    ld_receiver LIKE sy-subrc.
    data: t_packing_list like sopcklsti1 occurs 0 with header line,
    t_contents like solisti1 occurs 0 with header line,
    t_receivers like somlreci1 occurs 0 with header line,
    t_attachment like solisti1 occurs 0 with header line,
    t_object_header like solisti1 occurs 0 with header line,
    w_cnt type i,
    w_sent_all(1) type c,
    w_doc_data like sodocchgi1.
    ld_email = p_email.
    ld_mtitle = p_mtitle.
    ld_format = p_format.
    ld_attdescription = p_attdescription.
    ld_attfilename = p_filename.
    ld_sender_address = p_sender_address.
    ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
    w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
    w_doc_data-obj_langu = sy-langu.
    w_doc_data-obj_name = 'SAPRPT'.
    w_doc_data-obj_descr = ld_mtitle .
    w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
    CLEAR w_doc_data.
    READ TABLE it_attach INDEX w_cnt.
    w_doc_data-doc_size =
    ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
    w_doc_data-obj_langu = sy-langu.
    w_doc_data-obj_name = 'SAPRPT'.
    w_doc_data-obj_descr = ld_mtitle.
    w_doc_data-sensitivty = 'F'.
    CLEAR t_attachment.
    REFRESH t_attachment.
    t_attachment[] = it_attach[].
    Describe the body of the message
    CLEAR t_packing_list.
    REFRESH t_packing_list.
    t_packing_list-transf_bin = space.
    t_packing_list-head_start = 1.
    t_packing_list-head_num = 0.
    t_packing_list-body_start = 1.
    DESCRIBE TABLE it_message LINES t_packing_list-body_num.
    t_packing_list-doc_type = 'RAW'.
    APPEND t_packing_list.
    Create attachment notification
    t_packing_list-transf_bin = 'X'.
    t_packing_list-head_start = 1.
    t_packing_list-head_num = 1.
    t_packing_list-body_start = 1.
    DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    t_packing_list-doc_type = ld_format.
    t_packing_list-obj_descr = ld_attdescription.
    t_packing_list-obj_name = ld_attfilename.
    t_packing_list-doc_size = t_packing_list-body_num * 255.
    APPEND t_packing_list.
    Add the recipients email address
    CLEAR t_receivers.
    REFRESH t_receivers.
    t_receivers-receiver = ld_email.
    t_receivers-rec_type = 'U'.
    t_receivers-com_type = 'INT'.
    t_receivers-notif_del = 'X'.
    t_receivers-notif_ndel = 'X'.
    APPEND t_receivers.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
    document_data = w_doc_data
    put_in_outbox = 'X'
    sender_address = ld_sender_address
    sender_address_type = ld_sender_address_type
    commit_work = 'X'
    IMPORTING
    sent_to_all = w_sent_all
    TABLES
    packing_list = t_packing_list
    contents_bin = t_attachment
    contents_txt = it_message
    receivers = t_receivers
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    Populate zerror return code
    ld_error = sy-subrc.
    Populate zreceiver return code
    LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
    ENDLOOP.
    ENDFORM.
    reward points if it is helpful..
    regards,
    Omkar.

  • Only display and assign function for transport request

    Hi,
    I have a requirement for transport creation. I need to set a restriction on transport creation.the requirements are as per below :
    Group A : Allow to create a transport request - both workbench & customize request.
    Group B : Allow to assign transport request to the one create by Group A. This group is not allowed to create any request be it
                    workbece or customize.
    I found an object - S_TRANSPRT. I have create a role and assign only activity DISPLAY & ASSIGN to group B. However, group B can still create customize request. Is there any other objects that I have to restrict.
    Appreciate your feedback.
    Thanks,
    IAzir.

    Hi
    You can take system trace(ST01) and find out what are the objects and the field values you need to restrict.
    If you are able to find the same, its good , if not let us know.
    Regards,
    RItesh

  • Is it possible to do fax and email through adobe?

    Hi ,
    I would like to know is it possible to implement fax and email functionality through adobe forms like smartforms.
    regards,
    vijay

    hi ,
    check this link ...
    Re: Sending Adobe Interactive Forms via Email
    regards ,
    prashanti

  • More Save as.... and Email... problems

    We have been trying to figure out how to disable the "save a copy" and "email" functions when we publish our e-books. People keep talking on this forum about vouchers--I have no idea what that is and I don't think it applies to us. What's the magic option you check when packaging the e-book so that these functions are turned off?
    If you can save a copy and email it out, what's the point of using this book reader?

    I'm not sure I understand. Let me explain the situation and maybe you can help.
    We are a digital children's library that publishes books for kids free on the web. Some of the publishers who have contributed books have asked that they be encrypted in Adobe. This is so that any print, save, or copy function would be eliminated. Since there are thousands of users from all over the world using our library, each one of them would have a different Passport ID. We don't want to restrict the number of people who can view our books. Since some of them might be viewing them from public machines (but using different Passport IDs), I suppose perhaps even using the "Limit book to one device per user" function wouldn't work for us. We wouldn't want to restrict the number of people per machine who could view a book.
    I believe you're saying that it is completely impossible to disable the "save" and "email" functions. This is making us (and probably our contributors) very uncomfortable.
    I apologize for the low-techiness of this email. I'm just a grad student in library school and really don't understand a lot of the tech stuff.
    Thanks,
    Laura

  • Issues with LiveCycle ES4 - "Distribute Form" greyed out and "email button" not functioning

    Bought this software on 8/1/13.
    Designed my first form, "saved to repository" and proceeded to test. The email function for whatever reason does not work. Went back and examined the properties to the button, I have it set up correctly. In fact the XMS format works perfect, but I want the form to come via PDF when emailed. This feature is not coming through on email.
    I am not sure if the above two issues are related however I did read that in the stand-alone software, the "distribute form" is not offerred which I wonder if this the reason it is greyed out.
    Can anyone help me work through the "email button" issue?

    If the PDF submits to a server-side script URL it can bypass client-side email software.
    Try the online PDF submission examples and see if it works for you in Mozilla FireFox:
    http://www.pdfemail.net/examples/
    You should also make sure the browser is using the Adobe Reader plugin as the default PDF reader.
    http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

  • Display Like and Share functionality in SharePoint 2013 search result

    Hello Experts,
    I dont Know whether i am asking a good question or bad one . but i am not very much expert in search.
    I have to display No of Likes , Share functionality in SharePoint Search Results. 
    i know little basic about how display templates works. i want to implement these like and share functionality as actions  in Item_common_hoverpanel_Actions template. show that i can see in preview.
    please if any body can help me . i will be highly thankful to you.
    Mukesh

    This will be difficult. The number of likes has a managed property called LikesCount but it is not populated by the search crawler. So your JavaScript will have to read the "LikesCount" field of the corresponding list item. That would be a
    lot of code to execute in the item display template just to display the number of likes. You could have a button that displayed a callout that would get the information and display it. The Sharing could be done via JavaScript in your item display template
    using a REST call. You can see an example of code to do that here:
    http://sharepointfieldnotes.blogspot.com/2014/09/sharing-documents-with-sharepoint-rest.html?showComment=1428595550241#c3227376854590814312
    Just remember the user must have permission to share these documents, so your code will have to handle this.
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • When my iPhone 5s is paired with my 2014 Lexus Rx350 I am able to view text messages but cannot view email messages in the car display screen. My previous Blackberry Torch would read both text and email messages. Does anybody know how to fix?

    When I pair my new iPhone 5S in my 2014 Lexus it displays and allows me to read the SMS messages off my phone on the car display but it does not display or allow me to read email messages. When pairing my previous Blackberry Torch the car displayed and allowed me to read both. Lexus have told me it is an Apple problem and not a Lexus problem which may be true as the BB phone worked great. Does anybody know if Apple is planning an iPhone update for this? 

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • When I try to send a link to a page from Safari, I get a message saying that sending the message to the server failed.  It places a copy in the outbox.  All other email and safari functions work properly.  Ipad 2 IOS 7.1

    My Ipad2 works fine except when I try to email myself a link to a safari webpage.  I get an error message saying that the message failed to connect to the server.  It says that a copy of the message has been left in the outbox.  I cannot get the message from the outbox.  All other email and safari functions work as expected.
    I have cleared data and cookies, powered down, and done a reset.  Nothing seems to help.

    Typing in additional text seems to get the job done.  This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
    I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest.  Adding the extra text seems like a pointless step, but it does work.
    Thanks.

  • Is there a way to disable 'Save as' and 'Send Email' function in Acrobat XI?

    Hi,
    Is there a way to disable 'Save as' and 'Send Email' function in Acrobat XI?
    Thnx in advance.

    I would hope there would be no way to disable Save AS that would reduce the applicationss capability. What are you trying to prevent happening?

  • How to change the password and username in the scan to email function of a HP laserjet 300

    Trying to set up the scan to email function. Using the printer pad, I get as far as getting to  SMTP outgoing and then I get an error message that the username or password is incorrect.    I do not know what the correct  username or password is.
    I would like to get rid of what ever the incorrrect information is and  redo the information.  NO one seems to understand the problem.  Any help?

    @Ray2905 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Email address hacked via iphone. iphone locked home screen displaying my email password! and has been reset. now unable to restore iphone, saying i do not have permission

    Email address hacked via iphone. iphone locked home screen displaying my email password! and has been reset. now unable to restore iphone, saying i do not have permission

    If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • Links in email aren't working and ads aren't displaying in email either

    Links in email aren't working and ads aren't displaying in email either.  What settings should be changed to correct this.?

    Go to settings>general> restrictions and see if anything has been turned on.

  • How to show users display name and email address in open social widget?

    Hello experts,
    Is it possible to retrieve users display name and email address with opensocial javascript e.g. Login widget seems to load user data (and userData.firstname) during the site init. Is this something that could be consumed or is there some opensocial data request that could/should be used. Any working sample widget spec would be appreciated.
    Best regards,
    Ville

    Hi Ville,
    in the logon widget, we also use the data retrevied from siteInit.loadData.data.user. However, this widget is part of the out of the box openSocial widgets, it is being released with the product code, not as a separate OS widget deployed on HANA Cloud Platform.
    If you'll do window.parent.siteInit you'll probably will get the data you are looking for, but this isn't the official public API, so you can use it but we cannot commit on keeping this structure.
    Why do you need this information in the widget level? Does your widget require authentication or is it for personalization needs?
    The best way is to retrieve this info on the java side using HAHA Cloud Platform APIs and send them back to the client.
    Look at this - SAP HANA Cloud Platform SDK >
    Package com.sap.security.um.user
    Interface:
    User
    This interface provides read access to user data and is an extension of Principal.
    UserAttribute
    The interface represents abstraction over a user general attribute, such as an e-mail address.
    UserProvider
    This interface represents the service interface which provides read access to a user implementation.
    Inbal 

  • Send smartforms as fax and email

    Hi SAP gurus,
    Can you please tell me on how to send smartforms as fax and email?
    I would really appreciate your help.
    Thanks in advance.

    Hi,
    Check the below link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/content.htm
    Thanks,
    Sankar M

Maybe you are looking for