Smartforms tittle heading formating

Hello Gurus,
I have a smart form.  In the main window, I am outputting 3 tables. Only the first table contains data like few columns. Other 2 tables just gives the total and invoice amount.
In order to make the heading of the first table appear in all the pages printed, I created a secondary window for the heading. If there are more than one page and the first table outputs its entries in more than the first page, then it is working fine.
But when the first table data are swufficient only in the first page and the second and third table data appears in the second page, I want to avoid the first table heading from being printed in the second page.
How can I control this.
The other issue I have is I need to separate all three tables display. I need borders (box) only to each table and then space and again next table in the next box.
How can I achieve this.
Regards,
B
Edited by: Balu on Aug 16, 2008 4:03 PM

Jagadeesh,
I have 3 tables in main window. Tables 2 and 3 are working fine.
If the entries of the Table 1 are more than one page, I am not getting the border at the bottom of the first page. But the borders are fine in the second page.
Any inputs on what to change.
Regards,
B

Similar Messages

  • Convert Smartform in PDF format and send to SAP Workplace

    Hi to all.
    I need help of somebody expert in SMARTFORM's.
    I need to convert a smartform into PDF format and to send as attachement for SAP workplace
    of the user.
    I developed the next code.
    IT is to function and to send the mail for SAP workplace, but it happens that smartform
    contains images (logos) and tables, when the user tries to open the file pdf in inbox gives
    to error - "An unrecognized token ' q0 ' was found".
    I tried to call a smartform only with text and functioned well.
    Somebody can help me?
    My code:
    Begin ***********************************************
    REPORT zteste_nsa_send_pdf_sap_office.
    DATA: t_print LIKE zeps_fm04 OCCURS 0 WITH HEADER LINE,
          v_size TYPE i.
    DATA: ls_bil_invoice TYPE lbbil_invoice.
    TABLES: nast.
    DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
    i_tline TYPE TABLE OF tline WITH HEADER LINE,
    i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
    i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    Objects to send mail.
    i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
    i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
    Work Area declarations
    wa_objhead TYPE soli_tab,
    w_ctrlop TYPE ssfctrlop,
    w_compop TYPE ssfcompop,
    w_return TYPE ssfcrescl,
    wa_doc_chng TYPE sodocchgi1,
    w_data TYPE sodocchgi1,
    wa_buffer TYPE string,"To convert from 132 to 255
    Variables declarations
    v_form_name TYPE rs38l_fnam,
    v_len_in LIKE sood-objlen,
    v_len_out LIKE sood-objlen,
    v_len_outn TYPE i,
    v_lines_txt TYPE i,
    v_lines_bin TYPE i.
    START-OF-SELECTION.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = 'ZFPS_FICHA_VALORIZACAO'
        IMPORTING
          fm_name            = v_form_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      w_ctrlop-getotf    = 'X'.
      w_ctrlop-no_dialog = 'X'.
      w_compop-tdnoprev  = 'X'.
      CALL FUNCTION v_form_name
        EXPORTING
          control_parameters = w_ctrlop
          output_options     = w_compop
          user_settings      = 'X'
          is_bil_invoice     = ls_bil_invoice
          is_nast            = nast
          is_repeat          = 'X'
        IMPORTING
          job_output_info    = w_return
        TABLES
          t_list             = t_print
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      i_otf[] = w_return-otfdata[].
      CALL FUNCTION 'CONVERT_OTF'
        EXPORTING
          format                = 'PDF'
          max_linewidth         = 132
          bin_filesize          = v_len_in
        TABLES
          otf                   = i_otf
          lines                 = i_tline
        EXCEPTIONS
          err_max_linewidth     = 1
          err_format            = 2
          err_conv_not_possible = 3
          OTHERS                = 4.
      IF sy-subrc EQ 0.
      ENDIF.
    Convert PDF from 132 to 255.
      LOOP AT i_tline.
        TRANSLATE i_tline USING '~'.
        CONCATENATE wa_buffer i_tline INTO wa_buffer.
      ENDLOOP.
      TRANSLATE wa_buffer USING '~'.
      DO.
        i_record = wa_buffer.
        APPEND i_record.
        SHIFT wa_buffer LEFT BY 255 PLACES.
        IF wa_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    SEND MAIL
      REFRESH:  i_reclist,
                i_objtxt,
                i_objbin,
                i_objpack.
      CLEAR wa_objhead.
    Object with PDF.
      i_objbin[] = i_record[].
    Object with main text of the mail.
      i_objtxt = 'Fichas de Valorização e Esquemas Tipo'.
      APPEND i_objtxt.
    Document information.
      wa_doc_chng-obj_name   = 'SMART'.
      wa_doc_chng-expiry_dat = sy-datum + 10.
      wa_doc_chng-obj_descr  = 'Ficha de Valorização'.
      wa_doc_chng-sensitivty = 'F'. "Functional object
      wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
    Pack to main body as RAW.
    Obj. to be transported not in binary form
      DESCRIBE TABLE i_objtxt LINES v_lines_txt.
      READ TABLE i_objtxt INDEX v_lines_txt.
      CLEAR i_objpack-transf_bin.
      i_objpack-head_start = 1.
      i_objpack-head_num   = 0.
      i_objpack-body_start = 1.
      i_objpack-body_num   = v_lines_txt.
      i_objpack-doc_type   = 'RAW'.
      APPEND i_objpack.
    Packing as PDF.
    Obj. to be transported in binary form
      DESCRIBE TABLE i_objbin LINES v_lines_bin.
      READ TABLE i_objbin INDEX v_lines_bin.
      i_objpack-transf_bin = 'X'.
      i_objpack-head_start = 1.
      i_objpack-head_num   = 0.
      i_objpack-body_start = 1.
      i_objpack-body_num   = v_lines_bin.
      i_objpack-doc_type   = 'PDF'.
      i_objpack-obj_name   = 'SMART'.
      CONCATENATE 'Ficha_Valorizacao' '.pdf' INTO i_objpack-obj_descr.
      i_objpack-doc_size = ( v_lines_bin - 1 ) * 255 + STRLEN( i_objbin ).
      APPEND i_objpack.
    e-mail receivers.
      CLEAR i_reclist.
      i_reclist-receiver = sy-uname.
      i_reclist-rec_type = 'B'.
      i_reclist-express  = 'X'.
      APPEND i_reclist.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = wa_doc_chng
          put_in_outbox              = 'X'
          commit_work                = ' '
        TABLES
          packing_list               = i_objpack
          object_header              = wa_objhead
          contents_bin               = i_objbin
          contents_txt               = i_objtxt
          receivers                  = i_reclist
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
      IF sy-subrc EQ 0.
      ENDIF.
    End  *************************************************
    Thanks very much to all and Happy New year...
    Nelson

    Please check this link...
    [http://help.sap.com/saphelp_nw04/helpdata/en/27/67443cc0063415e10000000a11405a/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/27/67443cc0063415e10000000a11405a/content.htm]
    -Muktar

  • How to send output of smartform in pdf format as an attachment to email

    how to send output of smartform in pdf format as an attachment to email
    search before posting further and follow Forum rules
    Edited by: Vijay Babu Dudla on Jan 15, 2009 4:50 AM

    Did u check on sdn?
    i dont think so or else there are many posts on this topic and good wikis too.
    look at one of these code tutorial wiki
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/mail%2bsend%2bthrough%2boutput%2bcontrols
    So next time do use the search functionality.
    кu03B1ятu03B9к
    Edited by: kartik tarla on Jan 15, 2009 12:33 PM

  • Smartform In PDF Format

    Hi All,
    Can anyone send me the sample code for attaching a SmartForm in PDF Format.
    Thanks in advance.
    Ulhas

    hi,
    check this
    http://www.****************/Tutorials/Smartforms/OTF2PDF.htm

  • I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I have written a binary file with a specific header format in LABVIEW 8.6 and tried  to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I can think of two possible stumbling blocks:
    What are your 8.6 options for "byte order" and "prepend array or string size"?
    Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
    LabVIEW Champion . Do more with less code and in less time .

  • VF01- invoice smartform in PDF format to be sent thro' mail

    Hello Gurus,
    We have a requirement from our client that we need to trigger a mail of invoice smartform in PDF format on saving in VF01.
    Can any body suggest the steps in NACE and also output..
    Regards

    As per your post, I understood that,
    After saving Invoice , automatically Invoice has to send in PDF format to the respective email id maintained in CMR-Payer master
    if yes, this involves ABAP & BASIS ,
    ABAP- Program & FOrm routine has to created & assigned in respective output type & type-PDF (Check in NACE- Output type)
    for this, you need to maintain the Condition record- VV31 - with medium as "Mail" -
    or else,
    you can do this manually also, in VF31- you can give a print  & save in PDF format- you can send it - but its complete manual process.

  • DOWNLOAD SMARTFORM IN TXT FORMAT

    NORMALLY WE DOWNLOAD SMARTFORM IN PDF FORMAT BUT I HAVE REQUIREMENT TO DOWNLOAD IN TEXT FORMAT.
    PLEASE HELP.
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Jul 24, 2008 6:24 PM

    when you generate the spool you can down load that in txt format
    Function is used RSPO_DOWNLOAD_SPOOLJOB when you want to do that programatically.
    Using the spool number, and provide the path where you want to down load that time mention the name
    C:\smart.txt
    it will be downloaded .

  • Smartforms in HTML Format

    Hi Guru's,
    Please help me.
    I want to display Smartforms in HTML Format.
    i.e when I run my Tcode inspite of Print Preview the data should open in HTML Format.
    Thanks in Advance.

    Chk this..
    http://help.sap.com/saphelp_nw04/helpdata/EN/59/cd7da407d711d5b66f006094192fe3/content.htm
    Re: FM for conversion of graphical display of spool to html
    Regards,
    Midhun Abraham
    Edited by: Midhun Abraham on Oct 11, 2008 9:35 AM

  • Smartform to BIN format

    Hi all,
         I have requirement like attach Smartform into Purchase order .
    So that i want to convert Smartform to BIN format.
    How to do this.
    Thanks in advance.
    Regards,
    Arun.

    Hi all,
         I have requirement like attach Smartform into Purchase order .
    So that i want to convert Smartform to BIN format.
    How to do this.
    Thanks in advance.
    Regards,
    Arun.

  • Hi, I have converted different smartforms to pdf format.How to combine pdf?

    Hi All,
    I have converted different smartforms to pdf format. How to combine all the pdf's into single pdf.
    I need all the smartforms to be in single pdf.
    Please help me in this regard.
    Thanks in advance.

    Hi Keshu,
    Individual pdf should be sent to individual user.
    And at last all the pdfs of the smartform should be combined into one.
    And admin have the provision to download it .
    I mean the requirement is
    For example.
    For the month of september i will generate Pay Slip to each employee. And each pdf will be send to corresponding employee.
    And finally all the pay slips of all the employees will be combined into single PDF and admin will download it and keep it for reference.
    So as of now. I have generated individual pdfs and mailed it accordingly.
    But how to combine it into one PDF is my question.
    Please help me in this regard.
    Thanks in advance.

  • Displaying a smartform in pdf format using webdynpro

    Hi,
    I have created a smartform using t.code smartforms. I have created a function module within which i used the function mocule convert_otf which will convert the smartform into binary format. Now how do i proceed in displaying the form using web dynpro.
    Plz give me your suggestions.
    Thanks in advance.

    CALL FUNCTION LV_FUNC_MOD_NAME
        EXPORTING
          CONTROL_PARAMETERS = LS_SSFCTRLOP
          OUTPUT_OPTIONS     = LS_OUTPUT_OPTIONS
          USER_SETTINGS      = ' '
          RRNUM              = IM_RRNUM
        IMPORTING
          JOB_OUTPUT_INFO    = LT_RETURN
        EXCEPTIONS
          FORMATTING_ERROR   = 1
          INTERNAL_ERROR     = 2
          SEND_ERROR         = 3
          USER_CANCELED      = 4
          OTHERS             = 5.
      IF SY-SUBRC <> 0.
      ENDIF.
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        FORMAT                = 'PDF'
        MAX_LINEWIDTH         = 132
      IMPORTING
        BIN_FILESIZE          = LV_LENGTH
        BIN_FILE              = LV_XSTRING
      TABLES
        OTF                   = LT_RETURN-OTFDATA
        LINES                 = LT_TLINE
      EXCEPTIONS
        ERR_MAX_LINEWIDTH     = 1
        ERR_FORMAT            = 2
        ERR_CONV_NOT_POSSIBLE = 3
        ERR_BAD_OTF           = 4
        OTHERS                = 5.
    IF SY-SUBRC <> 0.
    ENDIF.
    LV_FUNC_MOD_NAME is your smartform function module name.
    LV_XSTRING contains the stream of the pdf , send this to the browser using the following code.
        LV_FILENAME = 'RebateRequest.pdf'.
        LV_CTYPE = 'pdf'.
        CL_WD_RUNTIME_SERVICES=>ATTACH_FILE_TO_RESPONSE(
                  EXPORTING I_FILENAME = LV_FILENAME
                            I_CONTENT  = LV_XSTRING
                            I_MIME_TYPE = LV_CTYPE
                            I_INPLACE = ABAP_TRUE
                            I_IN_NEW_WINDOW = ABAP_TRUE ).
    Abhi

  • Smartform and date format

    if i need the change the date format according to country how can i do it
    ( i.e ) I am creating a smartform, the date format i use is normally dd/mm/yyyy
    if the same smartform is printed in some other country( using format yyyy/mm/dd or any format)
    i want my date format to change based on where it is printed.
    In SAPScripts there is a command SET COUNTRY.
    Can I use this command for my requirement. If so How?

    hi check this referred link and do the coding accordinly...please search before you post ..
    Country specific date format
    and try this C14N_COUNTRY_DATE_DECF_GET too
    Edited by: Venkat Appikonda on Jan 28, 2009 12:37 PM

  • Excel Header Format using GUI_DOWNLOAD

    Hi Experts,
    I need to download the excel file with the below shown header format.
    I can able to download as excel using GUI_DOWNLOAD. But I don't know how to bring the first row of the above pasted image.
    Please advice any way to download the file with the above header format.
    Thanks,
    Srini

    Here is some sample code of someone who has done this... i know lazy of me just to paste a link but I think it is the code that will fit your requirement.
    http://scn.sap.com/message/6048823#6048823

  • INVALID END HEADER FORMAT error

    I have just installed the Oracle 9i database on windows NT server, but the
    Oracle Database Configuration Assistant returns INVALID END HEADER FORMAT error, eachtime i attempt to create a new database.
    Oracle 9i software is installed, but no database was created. How can i solve this problem?
    or how can i create the database manaully?
    kayode,
    [email protected]

    Hi,
    If you don't have a database error (ORA-), then you're probably hitting some sort of DBCA bug. I'd use the DBCA to generate scripts and then run the scripts manually to see if you can create a database that way.
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci1054696,00.html
    Are you able to create scripts through DBCA if yes then you can create your database with help of scripts.
    go through below link for manually database creation ( it is also some working in Oracle 9i. After scripts creation. Script creation is different then oracle 10g.)
    http://dbataj.blogspot.com/search/label/Database%20Creation
    if not then you hit bug ( according to above mention link) raise a iTAR.
    regards
    Taj

  • Analyzer - Table header formatting

    Hi @ll,
    I`ve formatted a BEx Analyzer workbook to our requirements. The only thing I can`t change is the table header.. Could anybody tell me how to change the table header formatting?
    Regards,
    Flo

    Hi,
    Open your workbook. Go to design mode, select the design item in the header and delete the design item.
    Again click on design mode to come back to original workbook and click on header and delete the header bar and give the table header as per your requirement.
    To format the table header, right click on header and use excel foramatting(Font size, font & font style).
    Hope it is helpful.
    Thanks,
    Ashok

Maybe you are looking for