SMD within SOLMAN SP15

Hi!
I have problems by running the Setup Wizard for sattelite system for SMD/Root Cause Analysis.
All steps are successfull, besides the first one:
Wilyhost Agent:
Error: Retrieving list of Enterprise Managers failed: No Enterprise Managers configured for Queries
Step Wilyhost Agent Details
Created destination E11_JC00_server0
Created action SAP GC|E11_JC00_server0 - SAP GC|E11_JC00_server0
Created 1 action(s).
Retrieving list of Enterprise Managers failed: No Enterprise Managers configured for Queries
Exceptions
java.sql.SQLException: No Enterprise Managers configured for Queries
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:224)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:377)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:423)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:242)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:417)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:90)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:109)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:309)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:263)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:655)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:28)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:903)
at java.lang.Thread.run(Thread.java:534)
As a consequence of this no data are shown in E2E Workload Analysis.
Can some one help with this issue?
Thank you very much
regards
Thom

Tom,
Make sure that when you ran SMD setup wizard, job CCMSBISETUP completed successfully. Check this in SM37.
Check ABAP runtime errors in ST22.
If you are getting RAISE_EXCEPTION error, apply note 1119766.
Make sure that MultiProvider 0SMD_MPIH is activated. In BI client run transaction RSA1, Modeling, InfoProvider- check if 0SMD_MPIH is active.
If above doesnt solve the issue, try to do Manual activation of BI Content for E2E Diagnostics. (note 1110013)
Hope this helps.
Thanks,
Labinot Bytyqi

Similar Messages

Configuration of SMD on SOLMAN 4.0 (SP-13)

Hi Guru's,
I have given a task to implement EWA for JAVA/Portal systems, therefore, I have to configure Soman Diagnostics. I really need help configuring SMD. So far I have understood that I have to install SMD and Wily Introscope Ent..Server.... where should I step in. I have some questions:
1. Do I need to install SMD agent on SOLMAN system?
2. Do I have to have Wily Introscope Enterprise Server Installed on my soman?
I Have tried the following things. I have done some part of SMSY config...
Else, Can anyone please help me finish this task ..
I would really appreciate your help.
Thanks,

Hi,
Please use Installation and Configuration Guides on http://service.sap.com/diagnostics.
For EWA specific please use SAP Note 976054.
SMD Agents have only to be installed on Satellite Systems.
Wily Enterprise Manager can be installed on the same machine as SolMan or separately.
Regards,
Stephan

SR3 SMD Agent on SP15

Hi
Our Solution Manager is on SP14 and Managed System is on SP15. I want to install the SMD Agent. As per the note 1126895 it is possible and suported. LMSERVICE is SP14.
I used note 1170855 to install it and it was successfull but the status is "in Progress" in http:////<hostname>:<port>/smd page. It says "DEPLOYING APPLICATION". It never finishes.
I checked the log file jvm_SMDAgent.out and it says that
Starting SMDAgent ...
Running SMD Agent ...
Establishing connection to server 'ms://<hostname>:8177/P4
[ms://<hostname>:8177/P4] Waiting for connection ...
[ms://<hostname>:8177/P4] Checking server availability...
[ms://<hostname>:8177/P4] Authentication in progress ...
[ms://<hostname>:8177/P4] Connection established .
[ms://<hostname>:8177/P4] Registering agent on server ...
Exception occured. Please check log files.[Exception ID:1219178405804 ]
[ms://<hostname>:8177/P4] Waiting for connection ...
[ms://<hostname>:8177/P4] Checking server availability...
[ms://<hostname>:8177/P4] Authentication in progress ...
[ms://<hostname>:8177/P4] Connection established .
[ms://<hostname>:8177/P4] Registering agent on server ...
It never finishes.
It is failing at deployment application.
The log file SMDSystem.0.log states following -
Aug 19, 2008 4:30:04 PM [Thread[Thread-2,5,main]] Info
[AgentContext.offlineDeployApplication] ENTERING - deploying file
com.sap.smd.agent.application.runtime_7.0014.20080429115048.0000.war
Aug 19, 2008 4:40:05 PM [Thread[SMDAgent connection thread,5,main]]
Error [Exception ID: 1219178405804 ] java.rmi.RemoteException -
error counter: 1
[EXCEPTION]
java.rmi.RemoteException: Agent Registration failed: Time out occurred
when calling method 'offlineDeployApplication' on object
[com.sap.smd.api.IAgentContext_Stub@1de64fc2] after 600000 ms.
possible cause: com.sap.smd.server.util.concurrent.TimeoutException
at com.sap.smd.SMDServerHandle.internalRegisterAgent
Anybody has experienced it.
Please let me know.
Regards.
SS

Hello,
Would you kindly share the solution?
Think I run into a similar issue.
Many Thanks,
Jan

BPM within SOLMAN: Contacts maintenance

Hello!
I am about to set up BPM within SAP Solution Manager (SPS 25).
By doing so I get the problem to add a contacts.
When I go to DSWP --> Solution Landscape Maintenance --> Contacts --> Contacts Maintenance
no contacts can be added or choosed.
Also from tcode solman_directory no Contacts can be added or choosed.
Can some one help to solve this problem?
I need BPM only for the monitoring of aborted jobs.
Thank you very much!

Hi
Please look at the section 4.2 in the below guide for contact mainenance [BPM setup guide|https://websmp102.sap-ag.de/~sapdownload/011000358700006137532006E/BPMon_Setup_Guide.pdf]
and this [guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/97d2e8b3-0b01-0010-b787-b8ce558a51c2?quicklink=index&overridelayout=true] for back ground job monitoring.
Jansi

SMD Version for Solman 7.1 on SLES10.3

Hi
We have set up a Solman 7.1 and need to install an additional SMD because Solman was a distributed install.
We use SLES 10SP3 as operating system, but Solman 7.1 requires SMD 7.30, which requires SLES 11.
What is best practice? Install an earlier SMD or disregard the warning (prerequisite check error) during SMD install?
BR
Kanan

Hi,
I would suggest you to go with SAP recommendation if it does not supported then don't install it otherwise in production environment, you will not get any support from SAP if it does not supported.
Thanks
Sunny

SMD agent communication channel

Hi All,
I am configuring SMD for our landscape.
I have successfully installed Wily Introscope Enterprise Manager 7.2 on our solution manager system.
from what i understand i need to install SMD agent in satellite system to connect to SMD server in Solman system. fyi, my satellite system reside in different segment of solman system. Whats port do i have to use to connect the SMD agent(satellite) & SMD server(Solman system)? Thanks
Ridhwan

The following ports have to be opened up in your firewall prior to End-to-End Diagnostics
installation. It is recommended to place the SAP Solution Manager within the same subnet or
DMZ of your managed landscape. In case you are managing systems in different subnets you
have to adapt your security settings and firewall accordingly.
Connection established u201CServiceu201D on dest. host / Protocol Service port example /from host(s) Format Src. Host to host
Dest. Host
Outside Diagnostics
Server
J2EE engine / HTTP
Ex: 50100 /
5<InstanceNb>00
DMZ Diagnostics Server
ITS / HTTP Default: 8000
Outside Diagnostics Server
Introscope Manager/ HTTP
Default: 8081
Diagnostics Server
IGS / HTTP Ex: 41080 /
4<InstanceNb>80
ALL Managed systems
(Diag. Agent)
Diagnostics Server
J2EE engine / P4 Ex: 50104 / 5<InstanceNb>04
ALL Managed
Diagnostics Server
Message srv. / HTTP
Ex: 8101 / 81<InstanceNb>
Hope this helps,
Thanks
Aditya.

Creation of ZLFN messages for those raised from SolMan, SLFN for SAP ?

Hi experts,
I need your urgent help on this please -
If I copy Transaction Type SLFN and create a ZLFN, is it possible for me to do any setting by which:
- All support messages created from within SolMan (in Testing, Configuration etc>) always picks ZLFN
- All support messages created from Satellite Systems (the 'real' messages after the project goes live) uses the SLFN
The reason for this requirement is to play around with status values, subject, categories etc. for SolMan messages without disturbing the standard settings of SLFN.
Any specific help will be gratefully acknowledged and rewarded.
Warm regards,
Srini

Hi Christian,
I have just been able to find, with a kind ABAP colleague here, that the Function Modules behind NOTIF_CREATE transaction kind of points to SLFN (though not overtly hard-coded, pretty much similar!)
I am trying to ascertain a few more things. If there is no way to open up Customizing entries behind it (I serious doubt), the only possible option would be to do include custom code into the program DSWP_NOTIF_CREATE_DETAIL at appropriate level.
Best regards,
Srini
This has to be a custom development, as per my current findings. This thread is being closed for housekeeping sake.
Edited by: Srinivasan Radhakrishnan on Jun 24, 2008 4:55 PM

Can I Test the Test Package Created in SolMan Directly from ECC?

Hi,
the test plan and test packages are created in Solution Manager. The Test Packages are comprised of transactions (on ECC).
(The business scenarios and processes are defined in Solar01, ECC is defined as logical component and assigned to every tx, the test case description is uploaded in Solar02,...)
The needed Trusted RFC (to enable the tester to start the tx from within SolMan) is running late, but I can see that STWB_WORK tx is also available in ECC.
Of course - when I open it in ECC (logged on as a test user - defined in test package in SolMan) the test package is empty in ECC.
What kind of connection is there within STWB_WORK in ECC and SolMan?
Can one somehow "transfer" the packages from SM to ECC, so the tester can start to test the transactions from ECC directly?
Is it possible to see the results and status overview in SolMan during and after testing?
Thank you in advance,
cheers,
Nenad

Hi
You getting confused between old ECC test workbench and Solution Manager Test workbench.
Test workbench is present there from r/3 version onwards.
When you are performing testing via solman then you have to use the test packages assign to you in STWB_WORK which has the relevant transaction and doc for you to test
here you upload the test result and update status .Later any PM can generate report for overall testing including entire landscape and not one system.
But remember it has got no connection to ur r/3 workbench
The diff between 2 is...solman test workbench is for entire landscape including BI R/3 ECC any other system ...but in r/3 etc the workbench is alone and obsolete now is used for standalone testing.
Hope it carifies ur doubt completely
Regards
Prakhar

Database exceptions data missing in SMD 7.1

Hello all,
I have configured SMD on SolMan 7.1 SP03. I successfully connected 2 systems (ABAP single and JAVA single) to technical monitoring. Also SolMan self-monitoring was configured successfully. I can see some monitoring data in solman_workcenter, but I don't see any data in section Database Exceptions and Database performance like e.g. tablespace usage, last successful backup, reads per usercall etc... I can see current data in Database availability section - archiver status, instance status etc... There are obviously some data missing in BI as I get an info message : "No data has been transferred to BI system up to now for metric .....". Unfortunately I can't find out where is the problem so far. I can see SMD agents are connected and pushing other data (ABAP and host related) to SMD w/o any problems. Any hint is appreciated.
Thanks.

Hi,
Check this: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/f7/51b87f807344eba0ddca2d2174cbee/frameset.htm
"A remote database connection between the DBA Cockpit and the remote database is configured and available, to gather the data for tablespaces, availability, backup status, etc. remotely. The prerequisites for database administration and monitoring are described in SAP note 1027146."
Cheers,
Diego.

Using Solution Database (IS01) in SolMan without TREX

Hi all,
I just wanted to use the solution database within SolMan, which comes with the standard CRM functionality (IS01). Unfortunately I always receive dumps when creating (SAPSQL_ARRAY_INSERT_DUPREC) and searching (OBJECTS_OBJREF_NOT_ASSIGNED_NO) for problems and solutions.
Afterwards I found that the installation of the TREX server is required and this is maybe the reason. Is this true?
How can I run the solution database without the installation of a TREX? Is this possible?
Please help.
Thank you very much in advance, and have a nice weekend.
Stefan Bauert

Hello Charan,
Thank you very much for your feedback!
I went through the wizard of TCode "CRMC_SAF_WZ_SE" and entered requested program, but I was leaving detailed data for http and so on blank.
After that I went to TCode "CRMC_SAF_ADV_CLIENT" and wanted to enter the recommended description to "Learning Enginge Description". The following 2 entries already exist:
DEFAULT_ASPR Spreading Activation
DEFAULT_PURE Pure Correlation
Do I need to enter a new entry, or just paste the program name into one of these entries?
However the creation of a problem is still failing with dump OBJECTS_OBJREF_NOT_ASSIGNED.
Finally my question: If I do not want to use the service desk for this, can I use the solution DB without TREX?
thanks and regards
stefan

Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

Hi all,
I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
Is someone know if it is normal or if it is necessary to patch solution manager ?
Is ther a documentation existing to configure ERP EHP4 systems ??
Thanks for your answer.
Regards
Gerard

I have not seen any document to configure EHP4 systems specfically.
I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
You might want to have a glance over some notes
Note 1283307 - SMSY: Product version cannot be determined correctly
Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
Note 1320545 - Updating the product version in SMSY

Virtual systems within Transport system landscape

Hi!
I should map the existing transport management system landscape into ChaRM approach within SOLMAN.
The existing transport management system landscape has a lot of virtual systems with virtual transport routes.
Can some one of you explain the usage of such virtual systems with their virtual transport routes?
Thank you very much!
regards
Thom

read,
http://help.sap.com/saphelp_nw04s/helpdata/en/44/b4a0db7acc11d1899e0000e829fbbd/frameset.htm
Regards
Juan

Solman 7.0 with Willy Interscope 8.0 Upgrading EHP1

Hello Every body,
I am looking for the pre- requisites for Upgrading Solman 7.0 to EHP1And we have Willy Interscope 8.0 installed.
Do we have any impact for Sattilite Systems as they have Kernel 7.0.
And we are palnning to Install SMD in Solman and Sattilite system, So Which version is Compatible for our Scenario.
I have checked in Sap and found 7.11 is Suitable for EHP1.
I need some Suggestions.
Appriciate Quick Response,
Thank You,
SK.

Hi,
I am looking for the pre- requisites for Upgrading Solman 7.0 to EHP1
I would recommend to follow Upgrade Guide for the same and specially this [SAP Note 1146578 - Central Note: Upgrade to Systems on SAP NetWeaver 7.0 EHP1|https://service.sap.com/sap/support/notes/1146578] to get more information. You will requried to use latest SAPup and correction pachkages for Upgrade.
we have Willy Interscope 8.0 installed.
Do we have any impact for Sattilite Systems as they have Kernel 7.0.
I think it will not affect. The main concern is that the version of Introscope Agents (on managed systems) should not be newer than the Introscop Enterprise Manager version (on solman host). To get more info, refer [FAQs - Willy Introscope|https://websmp110.sap-ag.de/~sapidb/012003146900000709302008E/IntroscopeFAQ.pdf] and SAP No[Note 797147 - Wily Introscope Installation for SAP Customers|https://service.sap.com/sap/support/notes/797147]
And we are palnning to Install SMD in Solman and Sattilite system,
So Which version is Compatible for our Scenario.
I have checked in Sap and found 7.11 is Suitable for EHP1.
With Solman 7.0 EhP1 >= SP 18 , SMD 7.01, 7.02 and 7.11 can be compitable. To get more information , refer point 2.2 of [Diagnostic Setup guide|https://websmp209.sap-ag.de/~sapidb/011000358700000952852009E.PDF].
Regards,
Bhavik G. Shroff

How many SLD's require for 2 solman system requirements?

Scenario1:
One solman system for entire landscape->One SLD is required.
Is this SLD should be a seperate system or can be within solman?
Scenario2:
One solman system for DEV/QAS and other solman system for PRD.
How many SLDs are required? Can we manage with single SLD?
If two SLDs, Then both should be seperate systems. i.e, One SLD -> DEV/QAS Solman, Another SLD ->PRD Solman.
If only one SLD, Then it should be seperate system or can be within solman?
We do have EP in client enviroinment. Can we use SLD of EP?

Hi,
you can use one SLD for all your systems if you want. You can either use an existing one or the one which comes with Sol Man. That's up to you.
Any scenario is possible.
/cheers

SAP HTTP Plug-in- no connection to SMD

Dear all,
I have started the E2E-Trace analysis from Solution Manager Diagnostics.
I have downloaded the last plug-in based on OSS Note : 1041556
I start this tool by clicking on SAPIEPlugin.exe.
I got the screen to login to SMD before starting my transaction in my web page.
SMD Host : solman
SMD HTTP port : 58000.
The SID of SMC system, where the SMD run, is 80.
I have also tried with communication 8080, 8080, 58004 without success.
It refuses to connect to SMD, even if all communcation ports are opened.
Do you have any explanation ?
Best regards
P. Cuennet

Dear all,
I have started the E2E-Trace analysis from Solution Manager Diagnostics.
I have downloaded the last plug-in based on OSS Note : 1041556
I start this tool by clicking on SAPIEPlugin.exe.
I got the screen to login to SMD before starting my transaction in my web page.
SMD Host : solman
SMD HTTP port : 58000.
The SID of SMC system, where the SMD run, is 80.
I have also tried with communication 8080, 8080, 58004 without success.
It refuses to connect to SMD, even if all communcation ports are opened.
Do you have any explanation ?
Best regards
P. Cuennet

SMD within SOLMAN SP15

Similar Messages

Maybe you are looking for