SMICM query

Hi,
I am trying to do a file-XI-HTTP scenario.
There seems to be a problem.
When i saw the trace file in SMICM i got the following warnign message.
*[Thr 1] *** WARNING => maximum number of sockets supported on this*
host (1992) less than parameter icm/max_sockets (2048) [icxxman_mt.c 2765]
Does this mean that there will a problem in the HTTP adapter intil the no of sockets is increaded ?
Pls help.
Thanks much,
Vignesh

Hi,
Please check with this thread
can not run webdispatcher as user <sid>adm
also check sap help
http://help.sap.com/saphelp_nw04s/helpdata/en/f9/037894620540188c254804544a52a4/frameset.htm
Thanks!

Similar Messages

Error publishing Query designer report to Web

Hi all,
I am facing error after executing the query in query designer in BI 7. The query fails to open in web and points to standard url:
http://portal-dmb.wdf.sap.corp:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=EX4_TBW20&VARIABLE_SCREEN=X&DUMMY=7
"Link appears broken"
Initially I have configured the web connectivity using the How to guide and carried out config in SMICM as well as SICF (activating BW node). If I enter the url from SMICM manually in IE, it would prompt for user/password for BI server and successfully logs on.
The issue only lies when publishing query from Query designer to web. Please advise if I have missed out some config here.
Thanks.

Hi,
check this notes/links if you have done all steps:
SAP NetWeaver 2004s: Setting Up BEx Web
SAP Note Number: [917950|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393137393530%7d]
[Setting up BEx Web - Short Track|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e]
BI 2004s: Checking Java Connections Web Application Designer
SAP Note Number: [989525|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393839353235%7d]
Regards
Andreas

Error in Running a query on ABAP web portal

Hi Guys,
We are working in a environment where BIW is installed with only WEB AS ABAP. We do not have enterprise portal in our landscape. so we need to run our reports on
url http:
host:8000\sap\bw\Bex? Query=........
But when we run a query fro Query designer it is taking the following path in internet explorer.
/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0FIAP_M30_Q0002&VARIABLE_SCREEN=X&DUMMY=1
So can someone help me to set the properties so that the query can run on path http:
host:8000\sap\bw\Bex?.....
regards,
saurabh

Hi Saurabh,
In SMICM transaction code we have to maintain the parameters in order to run the web report in the specified format.
i am listing some parameters in the below, Please have a look and see whether it can help u out .....
Services
icm/server_port_0     = PROT=HTTP,PORT=8000
icm/server_port_1     = PROT=SMTP,PORT=0
HTTP settings
icm/HTTP/max_request_size_KB   = 102400
icm/HTTP/j2ee_0                = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
icm/HTTP/server_cache_0        = PREFIX=/, CACHEDIR=/usr/sap/BSD/DVEBMGS00/dat
   a/cache
Misc
icm/host_name_full             = cauvery.com
icm/cancel_strategy            = cancel requests without session (stateless)
rdisp/plugin_auto_logout       = 1800
is/HTTP/virt_host_0            = :;
is/SMTP/virt_host_0            = :;
Once after maintain the parameters go and check in the SICF transaction code SAPBW---BEx + right click + test service. And check whether it is opening in the required URL path.
Regards,
Vara Prasad.

Query Designer is not picking the host:port

Dear All
We have installed BI 7.0 on Netweaver 2004s alongwith BI Java. When we run a query and execute it does not pick the hostname:port but come as
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSD_C03_Q009&VARIABLE_SCREEN=X&DUMMY=1
Please check i have activated all services in SICF and SMICM - all the services is running
and i have added the icm/hsotnamefull in the instance profile also.
is there any thing missing.
Whether PI/Xi is to be also installed and u think it is necessry to configure SLD?
regards
balaji

Japnese yen is maintained in units of 100. Check the entry in TCURX table for Yen. That is why the value is getting multiplied by 100 and getting displayed.
JPY (Japanese Yen) and others have a 0 in the TCURR-CURRDEC field which means 0 decumals. SAP applications will process amounts in these currencies by dividing the input value by 100 for storing in tables. Then, when being displayed, it will do a conversion exit and multiply the stored table value by 100 to show the correct amount.
SAP stores currency values in a data type that has a fixed interpretation of two decimal places. There are some currencies that do not work well with that setting. Usually that is because for some currencies , a fraction o the currency unit is meaningless. That is true of the Japanese Yen, the Turkish Lira, Korean Won and many other currencies whose value is often 10 US cents or less.
Here's a full explanation of the decimal issue in SAP. It is not just
limited to BW but is a system-wide situation.
1. By default there are two decimals on the data base, e.g. 123.45
2. When there is no corresponding entry in TCURX, these two decimals
are displayed in the query.
3. When there is an entry in TCURX, it determines the division factor
when reporting. (default = 2)
Example TCURX = NO ENTRY: Database entry = 123.45
There is no division
The above number is displayed as 123.45
Example TCURX = 3: Database entry = 123.45
There is a division by 10 (because 3 - 2 = 1).
The above number is displayed as 12.345.
example INR currency.
Example TCURX = 0 Database entry = 123.45
There is a division by 0.01 OR Multiplication by 100

BEx Query Designer problem when generate URL to IE

Hello everyone,
When I click the "Execute" button to run a query in Query Designer , it pop-up a IE windows with URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSALESREP01&VARIABLE_SCREEN=X&DUMMY=1
And IE display that "The address is not valid".
I think the reason is that there are some configuration not do.
Could any guys tell me what configuration should be done ?
Thank you!
BR,
Louis

Hi,
I think the Bex service is not confirgured correctly in your system.
For the WEB functionality to work corectly in your BW system there are several configurations that should be done. They are the Host name, listening ports, Protocols and the ICF service should be maintained & activated. The transactions involved are SMICM and SICF where you can check for these settings...
Refer to the hot to document on SDN:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Which gives the complete step by step instructions. check these settings in your system and contact your basis or portal team to configure them correctly.
Regards,Shilpa

To bold the descriptions for the structure members in the BEX Query

HI Experts,
Could any one please advise on how to BOLD the descriptions of the structure members in the BEX query.
Thanks in advance,
Jeswanth

Are you looking at making the same BOLD in the web display ..?
To do this :
Execute your query - go to display source for the page and you will see the structure members identified with a particular CSS class.
Open the CSS file from the MIME repository and then identify the class that is used for the structure elements and then change th CSS to make it bold and then upload the changed CSS into MIME .
Refresh the HTTP global cache from SMICM and then run your report again - you should be able to see the structure elements in BOLD.

Query in web page cannot be displayed

Hi,
When queries are executed on the web, "page cannot be displayed" is returned.
I checked,
SMICM and HTTP is active.
SICF the BEx service is active but, when i test it , it returns page cannot be displayed.
Also, can i know where the setting is made for the port that is used when a query is run on the web from the query designer.
Any suggestions to resolve this.
Raj.

Raj,
the setting is made in the RZ10 parameters - and also you can check the active http ports through SMICM - goto --> HTTP Server details.. or something like that.
Arun

BI to Web connectivity: Query designer's query cannot display in IE

Hi all,
I have configured web connectivity and from SMICM if I type the URL in IE it prompts for user/password and connects to BI, however, from query designer if a query is published on web the URL will point towards standard sap.com at port 50100 and IE will display a broken link message.
After a bit of research I discovered that httpplugin.dll is missing from /usr/sap/sys/exe and there is no folder under /exe where the httpplugin.dll is expected to be.
Any suggestion, please.
Thanks.

Below is the URL that IE points to:
http://portal-dmb.wdf.sap.corp:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=EX4_TBW20&VARIABLE_SCREEN=X&DUMMY=1
Thanks.

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Logical database in adhoc query

Hello All,
Can anyone tell me what is the logical database in adhoc query?

Hi
When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
Infosets are created from Transaction SQ02.
There can be four methods through which an Infoset can become a source of data:
1. Table join ( By joining two or more tables from Data dictionary)
example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
Custom Logical DBs can be created in T_Code SE-36.
4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
Reward Points, if helpful.
Regards
Waseem Imran

Query help on Goods Receipt Query with AP Invoice

Looking for a little help on a query. I would like to list all the goods receipts for a given date range and then display the AP Invoice information (if its been copied to an AP Invoice). I think my problem is in my where clause, I plagerized an SAP query to show GR and AP from a PO as a start. SBO 2005 SP01. Any help would be great appreciated. Thanks
SELECT distinct 'GR',
D0.DocStatus,
D0.DocNum ,
D0.DocDate,
D0.DocDueDate,
D0.DocTotal,
'AP',
I0.DocStatus,
I0.DocNum ,
I0.DocDate,
I0.DocDueDate,
I0.DocTotal,
I0.PaidToDate
FROM
((OPDN D0 inner Join PDN1 D1 on D0.DocEntry = D1.DocEntry)
full outer join
(OPCH I0 inner join PCH1 I1 on I0.DocEntry = I1.DocEntry)
on (I1.BaseType=20 AND D1.DocEntry = I1.BaseEntry AND D1.LineNum=I1.BaseLine))
WHERE
(D1.BaseType=22 AND D1.DocDate>='[%0]' AND D1.DocDate<='[%1]')
OR (I1.BaseType=20 AND I1.BaseEntry IN
(SELECT Distinct DocEntry
FROM PDN1 WHERE BaseType=22 AND DocDate>='[%0]' AND DocDate<='[%1]'))

Hi Dalen ,
I believe it is because of the condition
(D1.BaseType=22 AND D1.DocDate>='%0' AND D1.DocDate<='%1')
OR (I1.BaseType=20 AND I1.BaseEntry IN
(SELECT Distinct DocEntry FROM PDN1 WHERE PDN1.BaseType=22 AND DocDate>='%0' AND DocDate<='%1'))
Try changing
D1.BaseType=22 OR D1.DocDate>='%0' AND D1.DocDate<='%1
PDN1.BaseType=22 OR DocDate>='%0' AND DocDate<='%1'))
Lets see what would be the result . Lets have some fun with troubleshooting
See what would be the difference in the result .
Thank you
Bishal

Can you check for data in one table or another but not both in one query?

I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID     Name
123               John Doe
124               Jane Donaldson
125               Harold Douglas
MARKETER_ACCOUNT
Key     AccountID     Marketer    StartDate     EndDate
1001     123               10526          8/3/2008     9/27/2009
1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
1023     124               10541          12/03/2010     12/31/4712
ARCHIVE
Key     AccountID     Marketer    StartDate     EndDate
1015     124               10526          8/3/2008     12/02/2010
1033     125               10987         01/01/2011     01/31/2012
So my query needs to return the following:
123     John Doe                        10526     8/3/2008     9/27/2009
124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
          select AccountID
          from
                 ACCOUNT A,
                 MARKETER_ACCOUNT M,
                 ARCHIVE R
           where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                where M2.AccountID = A.AccountID),
                                                  (select max(R.EndDate) from Archive R2
                                                where R2.AccountID = A.AccountID)
               and upper(A.Name) like parameter || '%'
<can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)

if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
    id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
     , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
     , a.name
     , b.MktKey
     , b.FromDt
     , b.ToDate
from account a
join filtered_basedata b
    on (a.id = b.AccountId)
ID NAME                     MKTKEY FROMDT     TODATE
123 John Doe                  10987 28.09.2009 31.12.4712
124 Jane Donaldson            10541 03.12.2010 31.12.4712
125 Harold Douglas            10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin

Query help : Query to get values SYSDATE-1 18:00 hrs to SYSDATE 08:00 hrs

Hi Team
I want the SQl query to get the data for the following comparison : -
Order Created is a Date Column , and i want to find out all the values from (SYSDATE-1) 18:00 hours to SYSDATE 08:00 hours
i.e.
(SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 08:00:00.
Regards

Hi, Rohit,
942281 wrote:
If i want the data in the below way i.e.
from (SYSDATE-1) 18:00 hours to SYSDATE 17:59 hours ---> (SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 07:59:00.If you want to include rows from exactly 18:00:00 yesterday (but no earlier), and exclude rows from exatly 08:00:00 today (or later), then use:
WHERE   ord_dtl.submit_dt >= TRUNC (SYSDATE) - (6 / 24)
AND     ord_dtl.submit_dt < TRUNC (SYSDATE) + (8 / 24)
So can i use the below format : -
ord_dtl.submit_dt BETWEEN trunc(sysdate)-(6/24) and trunc(sysdate)+(7.59/24) . Please suggest . .59 hours is .59 * 60 * 60 = 2124 seconds (or .59 * 60 = 35.4 minutes), so the last time included in the range above is 07:35:24, not 07:59:59.
If you really, really want to use BETWEEN (which includes both end points), then you could do it with date arithmentic:
WHERE   ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - (6 / 24)
                  AND         TRUNC (SYSDATE) + (8 / 24)
                                           - (1 / (24 * 60 * 60))but it would be simpler and less error prone to use INTERVALs, as Karthick suggested earlier:
WHERE   ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - INTERVAL '6' HOUR
                  AND         TRUNC (SYSDATE) + INTERVAL '8' HOUR
                                           - INTERVAL '1' SECONDEdited by: Frank Kulash on Apr 17, 2013 9:36 AM
Edited by: Frank Kulash on Apr 17, 2013 11:56 AM
Changed "- (8 /24)" to "+ (8 /24)" in first code fragment (after Blushadown, below)

Query help, subtract two query parts

Hi,
I am beginner of PL/SQL and have a problem I couldn’t solve:
Table (op_list):
Item     -     Amount -     Status
Item1     -     10     -     in
Item2     -     12     -     in
Item3     -     7     -     in
Item1     -     2     -     out
Item2     -     3     -     out
Item1     -     1     -     dmg
Item3     -     3     -     out
Item1     -     2     -     out
Item2     -     5     -     out
Item2     -     2     -     in
Item3     -     1     -     exp
Would like to get result of query (subtract amount of 'out/dmg/exp' from 'in' ):
Item - Amount left
Item1     -     5
Item2     -     6
Item3 -     3
I wrote code that returns sum of all incoming items and sum all out/dmg/exp items, but couldn’t solve how to subtract one part of querry from another. Or maybe there is a better way. Also worried what happens if there is no 'out/dmg/exp' only 'in'
select item.name, sum(op_list.item_amount)
from op_list
inner join item
on op_list.item = item.item_id
where op_list.status = 'in'
group by item.name
union
select item.name, sum(op_list.item_amount)
from op_list
inner join item
on op_list.item = item.item_id
where op_list.status = 'out'
or op_list.status = 'dmg'
or op_list.status = 'exp'
group by item.name
Return:
Item1     -     10      [10 in]
Item1     -     5     [2+1+2]
Item2     -     14     [12+2]
Item3     -     7
Item3     -     4     [3+1]
Thanks in advance

Hi,
We can also use simple inline views to get what we need.
select a.item,a.amount-b.amount Balance from
(select item,sum(amount) Amount from op_list
where status = 'in'
group by item) a,
(select item,sum(amount) Amount from op_list
where status in ('out','dmg','exp')
group by item) b
where
a.item=b.item
order by item;
ITEM       BALANCE
Item1                      5
Item2                      6
Item3                      3Regards,
Prazy

Query help: query to return column that represents multiple rows

I have a table with a name and location column. The same name can occur multiple times with any arbitrary location, i.e. duplicates are allowed.
I need a query to find all names that occur in both of two separate locations.
For example,
bob usa
bob mexico
dot mexico
dot europe
hal usa
hal europe
sal usa
sal mexico
The query in question, if given the locations usa and mexico, would return bob and sal.
Thanks for any help or advice,
-=beeky

How about this?
SELECT NAME
FROM    <LOCATIONS_TABLE>
WHERE   LOCATION IN ('usa','mexico')
GROUP BY NAME
HAVING COUNT(DISTINCT LOCATION) >= 2Results:
SQL> WITH person_locations AS
2 (
3          SELECT 'bob' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
4          SELECT 'bob' AS NAME, 'Mexico' AS LOCATION FROM DUAL UNION ALL
5          SELECT 'dot' AS NAME, 'Mexico' AS LOCATION FROM DUAL UNION ALL
6          SELECT 'dot' AS NAME, 'Europe' AS LOCATION FROM DUAL UNION ALL
7          SELECT 'hal' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
8          SELECT 'hal' AS NAME, 'Europe' AS LOCATION FROM DUAL UNION ALL
9          SELECT 'sal' AS NAME, 'USA' AS LOCATION FROM DUAL UNION ALL
10          SELECT 'sal' AS NAME, 'Mexico' AS LOCATION FROM DUAL
11 )
12 SELECT NAME
13 FROM    person_locations
14 WHERE   LOCATION IN ('USA','Mexico')
15 GROUP BY NAME
16 HAVING COUNT(DISTINCT LOCATION) >= 2
17 /
NAM
bob
salHTH!
Edited by: Centinul on Oct 15, 2009 2:25 PM
Added sample results.

SMICM query

Similar Messages

Maybe you are looking for