SMOEAC site settings for material replication

SRM Gurus,
While doing the settings for material replication, in SMOEAC transaction
I am trying to create site 'SRM' of type CRM, In the site attributes if I enter RFC destination 'SRMCLNT001' and click on get values I am getting the following message "RFC destination SRMCLNT001 does not exist. No valid backend system".
Can someone please suggest what I need to check/configure to fix this issue?
Info:
R/3 side : RFC destination SRMCLNT001 (for connecting to SRM 5.0 system) created and remote logon tested OK.
Completed all CRM* table settings
SRM side: RFC destination R3CLNT800 (for connecting to ECC 6.0) created and remote logon tested OK
Thanks,
Arun

Make sure you have created the RFC destination in SRM also. You need to create the following:
RFC destination of SRM in SRM and in R/3.
RFC destination of R/3 in R/3 and SRM.
Regards, IA

Similar Messages

SRM 7.0 - CRM middleware settigns for material replication

Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.

Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa

Where does a sharepoint admin find the site settings for a mysite site collection?

We are using sp 2010 service pack 2.
When I look at another user's mysite, logged in as an admin (spsadmin2 is my daily admin type account), I don't seem to have access to the site settings.
However, if I log in as the fundamental farm admin account (spfarm), I do see the site settings drop down.
The site settings I see are not the site settings for a specific user's site collection. It is, instead, the settings for "mysites" in general.
So, how can I look at the site settings for a specific user's site collection?
I wanted to be able to look at their site collection recycle bin to see if something deleted was still there.
Thank you!

So, our mysites are associated with a web application separate from our other sharepoint sites.
The mysites root site collection has our SharePoint admins listed as full control owners.
The SharePoint admins also are listed as Farm admins.
Because there is only 1 secondary site collection owner permitted, if that is the means by which someone gets access to the site collection settings and permissions, then it seems like we would have to keep changing the secondary owner quite frequently.
You mentioned being able to set permissions on "the group" to have rights.
Which group? The Personal Sites Owners group of our mysites web app? Or another group?
Thank you for your help!

"Settings for material number conversion not found" occurs when ...

After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          11/28/2005 14:43:13
ShrtText
    Statement "CALL SCREEN" is not allowed in this form.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSHL2" had to be terminated because on
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    There is probably an error in the program
    "SAPLSHL2".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
    - COMMUNICATION RECEIVE
    - STOP
    - REJECT
    - EXIT FROM STEP-LOOP
    Moreover, conversion exits for output conversion
    (implemented by function modules called
    CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
    - MESSAGE E...
    to be used.
Trigger Location of Runtime Error
Program                                 SAPLSHL2
Include                                 LSHL2F19
Row                                     3
Module type                             (FORM)
Module Name                             TECHNISCHE_INFO5
rce Code Extract
e SourceCde
1 ***INCLUDE LSHL2F19 .
2 form technische_info5.
>>   call screen 1900 starting at 5 8.
4 endform.
5
6 &----
7 *&      Form SHRINK_VALUES
8 &----
9 *       text                                                           *
10 ----
11 * --> p1        text
12 * <-- p2        text
13 ----
14 form shrink_values.
15
16   loop at dynpselect.
17     clear checktable.
18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
19       move 'EQ' to checktable-op.
20       move dynpvaluetab-lowvalue to checktable-low_value.
21       append checktable.
22     endif.
What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content? What does that mean by this STOP msg "Settings for material number conversion not found"?
Thanks

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

Why we need crm middleware for material replication?

Hi Experts,
Why we need CRM middleware for material replication from ECC to SRM when we can do the vendor replication from ECC to SRM with ABAP report? IS there any technical limitation?
Thanks and regards,
Ranjan

Hello,
Vendors and locations, for example, you can replicate from ECC to SRM using ABAP reports.
However, if you want to replicate the following information, you should use the middleware:
- DNL-CUST-BASIS3 - Basis CRM online
- DNL-CUST-PROD0 - Material number conversions
- DNL-CUST-PROD1 - Product : categories
- DNL_CUST_SRVMAS - Customizing: Service Master
- MATERIAL - R/3 Material Master
- SERVICE_MASTER - R/3 Service Master
Check note 872533. It provides more information.
Regards,
Ricardo

Why do we need to define RFC destination and user for material replication

Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
Ranjan

Hello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo

Settings for material number conversion not found

"Settings for material number conversion not found"
This is the error that came out. I was everytime i try to access the activated business content 0material, the system comes up with this error. Please help me with this! Thank you!
-Peter

Hi Peter,
try oss note 555675, it tells you to use transaction OMSL.
regards
Siggi
Message was edited by: Siegfried Szameitat

Settings for Material shortage status (MSPT) in PM orders

For the purpose of material availability check in PM order, i have made the settings in IMG (OPJJ,OIOI).
Still i am getting error that "No Checking group maintained for production (Component) in Plant xxxx. I have maintained the availability check in Sales: General plant data of Material change mode (MM02). then i am getting the PM order status MSPT for material status.
To avail this status i have to maintain availability check all components? any other method to avail the same facility?

Hi
what else you require.
have you tested material mass maintainance. Do you think so that people are giving solution just to get the points.
Please don't be under wrong inmpression. We are here for knowledge enhancement and for getting help from Guru's like Rajesh sir, Pradeep sir and Reddy sir.
Regards,
Anand.

Why the dependency of "Site settings" for the "About me"-button in the top menu?

Hello, I recently had a customer case where the customer asked why certain users couldn't see the "About me"-button in the top personal actions menu, after they clicked at the user name/avatar. Only user details, "Sign out" and "My
settings" was visible for the user, who had an user license and a my site. There was also no customizations whatsoever in either javascript or css that could cause this, and the masterpage or the personal actions control doesn't seem to actually have
anything to do with the "About me"-button.
After some tracing and testing of Microsoft's code so we now know why the "About me" is not visible to all users. "About me" button depends on whether the "Site
Settings" is available in the menu or not. For the "Visitors" then there is no "Site Settings" because of their "Read"-permission level and thus does the "About me" button not appear in the menu.
In sposuitenav.js there is a loop for all ie:menuitem and inside of that there is these lines:
if(menuItem.id.indexOf("MenuItem_Settings") > 0) {
hasSiteSettingsMenuItem = true;
And a bit further down the code there is this:
if(!hasSiteSettingsMenuItem) {
a.AboutMeLink = null;
Which will cause so that the "About me"-link is null and is not rendered in the personal actions menu. Otherwise the AboutMeLink would have had the default value that is set by the code earlier.
So my question really, is why have Microsoft made the "About me"-button depending on whether or not the "Site settings" is visible for the user?
Because neither I nor my client can understand why there should be any relationship between Site Settings and the About Me link. Shouldn't anyone be able to go to their "my site"? As long as they have one, I can't see any reason to prohibit
anyone else than site administrators to see and use the "About me"-link.

It's a recent change it seems, people on the Office 365 Yammer network have noticed this as well. Microsoft has confirmed this as an issue and will work to fix it.
Join there if you haven't already :)
https://www.yammer.com/itpronetwork/#/Threads/show?threadId=466244664

General Settings for Material Management

Hi,
under Material Management in SPRO under General Settings for Materials Management
1. Set material block for goods movements Lock Exclusively and (ii) Late lock
2. Set Up Material Block for Invoice Verification
Set Up Material Block for Invoice Verification
(ii) Set Up Material Block for Invoice Verification
(iii) Set Up Material Block for Invoice Verification
Pls tell me which option i should select in which case?

Hi,
Each option have some time advantage on the other one, when the subject material is blocked for other users, preventing them from carrying out any IM postings.
For goods movement process, Exclusive block will hold the item code for longer time than Late block.
It is better to go with the stadard settings of 'Exclusive block' for Goods movement and 'blocked at first read' for invoice verification.
Jeeva.

Middleware-Filter settings for the replication of BP from CRM to R/3

Hi Experts,
Can we set filter criteria for the replication of BP's from CRM to R/3 in the delta load.If so how can we achieve it.
Points will be rewarded.
Thanks in advance
Nadh.

Dear Nadh,
Pls go through the followings:
http://help.sap.com/bestpractices/crossindustry/crm/v240/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc
http://help.sap.com/bestpractices/BBLibrary/documentation/D63_BB_ConfigGuide_EN_UK.doc
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
C03
Thanks,
Atin

XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

Settings for transactions replication from CRM to ERP

Hi,
Can you explain or point to documentation on what settings we need to configure in CRM and ERP side to replicate the transactions such as quotation, Sales Order etc from CRM to ERP?
As I understand we can use Adapter Business objects in CRM to transfer the ERP documents to CRM transactions?
What is the method for transferring in the other direction?
What are the customization things we need to maintain in both systems? Such as having the same transaction and item category types defined in both systems etc..
Please clarify this replication process.
Thanks

Take a look at the following notes:
620139
642944
888665
889051
And for replication of customazing and data take a look at building blocks B09 and C03.
However be aware that you will have to create transaction types and item category types on CRM, because this customazing can't be synchronized from ERP. So it has to be done manualy.
Regards.

Settings for material for PS

Dear All,
I have three scenarios for Procurement.
Scenario 1:
Assigning the WBS Element in the PR or PO and running the MM Cycle which will post the costs to WBS Elements.
Scenario 2:
Assigning the material component to the Activity and generating an auto PR and running the MM Cycle which will post the costs to WBS Elements.
Scenario 3:
Assigning a BOM to the Activity and generating an auto PR and generating PO's for Materials to be procured and generating planned orders for materials to be produced in house.
For all the above scenario's I can handle the PS configuration. But I want to know if there are some separate settings to be done in the material master for the materials to be used in the above mentioned scenario's.
Any help would be appreciated. Please provide any links if any.
Thanks & Regards
Sagar

Hi,
Please go throgh sap help link on material in projects
http://help.sap.com/saphelp_erp60_sp/helpdata/en/d7/b8853488601e33e10000009b38f83b/frameset.htm
Regards,
Sandeep

Error in Master Site Setup for Oracle Replication

Hi Guys,
While i was trying to setup the Master Site for Oralce 8.1.7
replication, a error is poping up like this :
ORA-06550:LINE 2, CLOUMN 4:
PLS-00201: IDENTIFIER 'DBMS_REPCAT_ADMIN.GRANT_ADMIN_ANY_SCHEMA'
MUST BE DECLARED
ORA-06550: LINE2, CLOUMN 4:
PL/SQL: STATEMENT IGNORED
looking forward to your kind help. If you have any idea about
solving this error then do contact me at my personal email :
[email protected]
Thanks in advince.
Souren

Niels,
1st check the storage prerequisites: http://itnewscast.com/chapter-6-oracle-vm-22-san-iscsi-and-nfs-backend-storage-configurations
2nd clean each servers cluster configs as show in the prerequisites section then create the pool.
Respectfully,
Roddy

SMOEAC site settings for material replication

Similar Messages

Maybe you are looking for