SMP 3.0 with WM 6.2 Server license Key

Hello All , Older version of syclo agentry , we need to configured sever license (No of User License Key) . But , can we do same thing in SMP 3.0 Server ? Because i could not find any server key things in WM 6.2 Agentry files . can you provide some suggestion here ? Thanks & Regards, Kunal Varaiya

Hi Kunal, Please check more information about licensing in below official help guide.
SAP License Auditing

Similar Messages

Tiger Server license key mismatch

I'm re-installing my OS X Tiger 10.4 server, only to be faced with a prompt for the license key. I entered as according to my "software serial number" sticker - but bizarrely the system requires the fourth field (single character) to be a letter - whereas on my sticker it is most definitely a number (zero).
Why the discrepancy here? Is this a known problem? How does one get around it?

Sometimes it is a letter sometimes a number. It depends on what was entered ahead of it.
Whenever I get a rejected / invalid serial number notice it is usually due to me "fat fingering" something earlier in line.
You know, "i"s that look like "l"s and "1"s.
Seems to happen more often the older I get.

Windows 2008 Server License Key not working on VirtualBox

I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded. What can I do to have this server activate correctly under the VirtualBox?
Thanks,
Tom

Hi Tom,
Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
internet and with KMS method please confirm this vm can communicate with your KMS server.
The related KB:
Understanding MAK Activation
https://technet.microsoft.com/en-us/library/ff793435.aspx
Volume Activation in Disconnected Environments
https://technet.microsoft.com/en-us/library/dd981010.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Leopard Server License Key suddenly becomes invalid after update to 10.5.8

After doing the update to 10.5.8, when I go into Server Admin, it says my License Key is a duplicate and locks me out of all services and only allows ten clients to connect. I tried switching the license to another, and the same thing happens. And both keys work perfectly fine on a different server. Any suggestions as to what may be going on?

Here is a copy of what keeps appearing in the Server Admin log file if that helps at all:
Aug 11 12:17:02 spub /usr/sbin/serialnumberd[146]: MulticastListener(): conflicting serial number from 129.130.29.128
Aug 11 12:17:06 spub servermgrd[55]: servermgr_info: [55] SNCheck() failed with 1 (spub.ksu.edu: )
Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *
Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0xab1c290) failed. *
Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *
Aug 11 12:17:06 spub [0x0-0x36036].com.apple.ServerAdmin[5939]: * ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0xab2b6a0) failed. *
Aug 11 12:17:34 spub postfix/smtpd[5641]: warning: 125.160.151.41: hostname 41.subnet125-160-151.speedy.telkom.net.id verification failed: nodename nor servname provided, or not known
Aug 11 12:17:51 spub postfix/smtpd[5641]: warning: 189.135.192.35: hostname dsl-189-135-192-35-dyn.prod-infinitum.com.mx verification failed: nodename nor servname provided, or not known
Aug 11 12:18:02 spub /usr/sbin/serialnumberd[146]: Conflict found for tag xsvr: local (pid = 55, extra= ); remote (host = spub.ksu.edu, extra = )
Aug 11 12:18:02 spub /usr/sbin/serialnumberd[146]: MulticastListener(): conflicting serial number from 129.130.29.128
Aug 11 12:19:00 spub postfix/smtpd[6166]: warning: 189.169.250.244: hostname dsl-189-169-250-244-dyn.prod-infinitum.com.mx verification failed: nodename nor servname provided, or not known
Aug 11 12:19:00 spub imap[6167]: TLS server engine: cannot load CA data
Aug 11 12:19:00 spub imap[6167]: TLS server engine: No CA file specified. Client side certs may not work
Aug 11 12:19:00 spub imap[6167]: STARTTLS negotiation failed: 213.spub.ksu.edu [129.130.29.213]
Aug 11 12:19:02: --- last message repeated 3 times ---
Aug 11 12:19:02 spub /usr/sbin/serialnumberd[146]: Conflict found for tag xsvr: local (pid = 55, extra= ); remote (host = spub.ksu.edu, extra = )
Aug 11 12:19:02 spub /usr/sbin/serialnumberd[146]: MulticastListener(): conflicting serial number from 129.130.29.128

Data Integration Management (DIM) 9.3.1 server license key is invalid

Hi all,
I am trying to install the Hyperion DIM server 9.3.1 to my Enterprise Redhat Linux 4. I run the setup program without any problem. When I when the configuration utility to configure the DIM, it asks for the connectivity keys. I just grid it from http://licensecodes.oracle.com/hyperion.html. But, it complaints that the license key is invalid.
Does anyone successfully install and configure DIM server in Linux environment? Please help.
nww

Problem sovled after changing LANG=en_US.

Actuate Server License Key

Hi,
Did any one know from where can i get a Actuate Server 7 license key ?
Thanks,
Asif

You can find more information on Supportweb:
Actuate License Keys Required for the Installation of the Siebel Reports Server for Siebel Business Applications Versions 7.5.x and Higher [ID 476821.1]

Error ! Unable to continue with N1 SPS Master Server installation.

Product: Sun N1 Service Provisioning System 6.0
I am trying to install sun N1 provsioning Service software. During installation am getting this error.
ERROR! Unable to continue with N1 SPS Master Server installation.
The required OS version is 2.1, and this machine is running .
I am currently using : uname -a
Linux home.org 2.6.9-55.0.12.ELsmp #1 SMP Fri Nov 2 11:19:08 EDT 2007 i686 i686 i386 GNU/Linux
/etc/redhat-release
CentOS release 4.5 (Final)
java-version:java version "1.4.2"
Please any suggestions. Do i have to edit the installation script or install jdk-1.5.

Just change your /etc/redhat-relase to something SPS is aware of...
Something like :
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
or something else (RH4)
This should work, but is NOT supported ;)
Chris

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Create a site collection with dedicated content db with the help of server object model

Hi,
I have a requirement to implement a create a new site collection with dedicated content db. i have got 2 PowerShell scripts which does the same. first i will create a content db and then create the sitecollection with contentdb
parameter with the created contentdb name.
Now the site collection created must contain few doc libs and few splists with look up columns, people picker data type, multiline of text, single line of text,choice field. hence i am thinking the below approach:
1) create a web template and include sp doclibs, splists , site columns in this.
2) i am thinking of a ui design to create the below:
These are called "projects" which is actually the site collection with the doclibs, splists and must be created by sharepoint admin on click of a link in my landing page.end users access these "projects" aka
"site collections" and uploads the documents into these projects and collaborate.
so my question is : On click of a button can I create a site collection with a dedicated content db based on the web template created with the hel of server object model?
The other approach is on click of this button call the power shell script which accepts the sitecollection name and contentdb name as parameter. is this possible in server obj.model ?
passing a paramter from code behind- visual web part ui to power shell ?
and it should create the site collec based on the web template and create the content db.
my doubt #3 : will it not throw error "request timed out" when creating the site collec and contentdb from ui ?

Try below:
http://sharepoint.stackexchange.com/questions/21606/programmatically-create-a-site-collection-in-an-existing-mounted-content-databa
PowerShell is just a wrapper for the object model. You shouldn't need to reference PowerShell in your feature, just create the new site collection with C# inside your feature. There's a blog post here that illustrates some code that may get you started.
http://blog.mastykarz.nl/programmatically-creating-sites-site-collections-custom-web-template/
http://blogs.msdn.com/b/vesku/archive/2014/06/09/provisioning-site-collections-using-sp-app-model-in-on-premises-with-just-csom.aspx
# Enable the remote site collection creation for on-prem in web application level
# If this is not done, unknon object exception is raised by the CSOM code
$WebApplicationUrl = http://dev.contoso.com
$snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
if ($snapin -eq $null)
Write-Host "Loading SharePoint Powershell Snapin"
Add-PSSnapin "Microsoft.SharePoint.Powershell"
$webapp=Get-SPWebApplication $WebApplicationUrl
$newProxyLibrary = New-Object "Microsoft.SharePoint.Administration.SPClientCallableProxyLibrary"
$newProxyLibrary.AssemblyName = "Microsoft.Online.SharePoint.Dedicated.TenantAdmin.ServerStub, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
$newProxyLibrary.SupportAppAuthentication = $true
$webapp.ClientCallableSettings.ProxyLibraries.Add($newProxyLibrary)
$webapp.Update()
Write-Host "Successfully added TenantAdmin ServerStub to ClientCallableProxyLibrary."
# Reset the memory of the web application
Write-Host "IISReset..."
Restart-Service W3SVC,WAS -force
Write-Host "IISReset complete."
If this helped you resolve your issue, please mark it Answered

SharePoint 2013 Enterprise with SP1 on Windows Server 2012??????? What am I missing?

Hi there,
As per MS - SharePoint 2013 Enterprise SP1 is compatible with Windows Server 2012 R2.
I have Windows Server 2012 R2 installed - now it does not let me install SharePoint 2013 Enterprise (Standard without SP1).
AND SP1 can ONLY be installed AFTER SharePoint 2013 Enterprise is installed.
So how to install SharePoint 2013 Enterprise with SP1 on Windows Server 2012?
Thanks.

You can download it at the Microsoft Volume Licensing Service Center:
https://www.microsoft.com/Licensing/servicecenter/default.aspx
or at the Microsoft Developer Network:
http://msdn.microsoft.com/
Please note that if you do not have access to either, you will have to work with the vendor who sold you SharePoint 2013 to get you a new ISO with SP1, or you will have to find a way to make a slipstreamed version on your own. I'm really hoping you
have VLSC or MSDN access, as this will make things much easier for you.

Trying to link SharePoint 2010 Enterprise with SharePoint 2013 Search Server raises error

Hi,
I am currently working for a multinational who has SharePoint 2010 Enterprise Edition installed, 2 WFE SERVERS, 3 APP SERVERS, 1 DB SERVER. They also installed SharePoint 2013 Exterprise recently.
   Microsoft have recently come in and set up the SharePoint 2013 Search Server to crawl content in SharePoint 2010 as the replacement search to SharePoint 2010 Search. So they have gone through process of certificates and permissions
setups I guess. I was told it was working, but recently failed. When I type in the search box on a web site for SharePoint 2010 I get the message:
         The search request was unable to connect to the Search Service.
I checked the Event log and the Critical error (in Task Category:Timer) I get is the notorious:
The Execute method of job definition Microsoft.Office.Server.Search.Administration.CrawlReportJobDefinition (ID fa882704-80d9-415b-9b9d-eae5e9bdefd4) threw an exception. More information is included below.
        The search service is not able to connect to the machine that hosts the administration
        component. Verify that the administration component 'e9172a05-22ec-4904-9508-
        e5431a180c2b' in search application 'Search_Service_Application' is in a good state and
        try again.
I know administration component is the crawler. I am assuming this is permissions.
The SharePoint 2013 Search Server is picking up SharePoint 2010 site collections items fine i.e. The SharePoint 2013 search shows items from 2010 as expected.
On the SharePoint 2010 central admin box the search service enabled and running (checked with powershell). (SharePoint Server Search 14)
The Search Service id: e9172a05-22ec-4904-9508-e5432a180c2b
I also get the message in event log for gatherer on SharePoint 2010 CA and Search Server:
       Could not access the Search database. A generic error occurred while trying to access the database to obtain
       the schema version info.
       Context: Application 'e9172a05-22ec-4904-9508-e5431a180c2b'
Details:
            (0x80040e09)
Is this permissions to delete something from crawler??????
I would appreciate if someone could help on this. I have tried to be as concise as possible.
Thanks.
John.

It was a case that someone had fiddled with the Service App Associations. Hadn't ticked SharePoint 2013 search. Was still point at 2010. Thanks.
The SharePoint 2013 Search works correctly for SharePoint 2010.
Can someone confirm that the Search Service Application on SharePoint 2010 still needs to exist and hence SharePoint Server Search 14 Service still needs to be running? I am guessing it would as you search from 2010 interface not 2013. I am getting a critical
error in the Event Viewer:
CrawlReportJobDefinition (Id <SharePoint 2010 Crawler>)
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component <crawler id> in search application "Search Service Application" is in a good state and try
again.
I think this is related to the fact we have SharePoint 2013 doing the search instead of 2010.
Any ideas?
John.

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

I have problem with login in sql Server give me support .pre login handshake

I have problem with login in sql Server give me support .pre login handshake

The following threads are on the same topic:
http://www.sql-server-performance.com/forum/threads/pre-login-handshake-error-when-connecting-to-db.687/
http://stackoverflow.com/questions/12308340/sql-server-2000-connection-error-pre-login-handshake
http://dbaspot.com/sqlserver-server/458011-error-occurred-during-pre-login-handshake-microsoft-sql-server-error-10054-a.html
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Discoverer Plus associate with the Oracle Application Server Infrastructure

Hi Everyone,
I just install the Oracle BI (v 10.1.2.0.2) into my 2003 server so I could use the Discoverer Plus and Viewer. This is a stand alone BI installation (I guess, I have little knowledge about Discoverer plus or Oracle AS).
My question is how could I connect the Discoverer plus to my ODS database, so I could create report or view report.
and where to find the Oracle Application Server Infrastructure (or How do I know I have the Oracle Application Server Infrastructure?)
I read the Oracle BI Discoverer Configuration Guide, and it tell me to associate the Oracle BI with the Oracle Application Server Infrastructure to deploy the Discoverer. so I went to the BI Application Server Control page, the Infrastructure section, the Identity Management to configure the Internet Directory, so I could I have the public connection, but it didn't work.
Also do I real need the Oracle AS Infrastructure to make the Discoverer Plus work?
Thanks in advance
Kevin C
Kevin
Edited by: cmingl on Feb 11, 2010 1:30 PM

Hi Kevin,
Oracle AS Infrastructure is needed only if you are implementing SSO for Discoverer or using Public connection .
Else only Oracle AS Middle tier is sufficient to work with Discoverer Plus .
Regarding "how could I connect the Discoverer plus to my ODS database, so I could create report or view report"
You need to create the End User Layer (EUL) and then grant privilege to the EUL to users who will be creating the report .
Thanks,
Sutirtha

SMP 3.0 with WM 6.2 Server license Key

Similar Messages

Maybe you are looking for