SMS Notification Issue with ISE 1.3

We have a problem with SMS notification. Please find the attached snapshot of current SMS email gateway configuration. Guest is receiving notification when I am providing the exact mobile number instead of 974$mobilenumber$ in SMTP API destination address: field.
We are running ISE 1.3 with patch level 2.
We are using the the default option (Global Default) SMS Gateway providers for our configuration rather creating a custom. Any luck??
Also i would like to notice If the guest portal is a self-registration portal, we can choose the providers. But there is no such configuration if it’s a sponsored guest portal. Please find the second attachment.

[email protected] is addressed by CSCtu25982. We do not put $mobilenumber$ while defining a SMTP-to-SMS gateway.
<Prefix>[email protected] is being addressed by CSCus78802, which is being included in ISE 1.3 patch 3.

Similar Messages

E-Mail notification issue with date

Hi All,
i am facing following email notification issue, could please clarify.
E-mail notification that was sent to employee this morning, March 17, 2009, but actually the email is dated February 3rd and refers to the January timecard, but she received it today, for the February timecard.
Please let me know why this was happening. I don't know if this issue on email server or workflow design.Thanks.
Regards,
Prasad

Hi,
any updates on this issue?
is there any possibility to resend the old notifications manually?
Thanks,
Prasad

OIM Email Notification issue with custom E-mail user attribute

Hi All,
We have a requirement where we need to send e-mail notification programmatically after a OIM account is created for the user through trusted reconciliation. Post process event handler is being used for this. We have created our own Custom Notification Event, created new Notification Template of the type Custom Notification Event.
For storing e-mail address for every OIM user we are using custom attribute "Email Home". Now the problem is NotificationService is by default picking e-mail address from OTB attribute "Email". Is there a simple way to pick the E-mail address from custom attribute? Below is sample code that we are working on. Any ideas on this would be very helpful.
NotificationService notService = Platform.getService(NotificationService.class);
NotificationEvent event = new NotificationEvent();
String[] receiverUserIds= {"<<*Comma separated list of OIM USER IDs to whom notification is to be sent*>>" }; sets the email address in the OTB "Email" attribute as receivers
LOGGER.info("Receiver User ID set");
event.setUserIds(receiverUserIds);
event.setTemplateName(poTemplateName);
event.setSender("<<*OIM User ID of sender*>>"); /// sets the email address in the OTB "Email" attribute as sender
HashMap<String, Object> templateParams = new HashMap<String, Object>();
templateParams.put("usr_login",poUserId);
LOGGER.info("template Param set" templateParams);+
event.setParams(templateParams);
notService.notify(event);
Thanks

Hi,
any updates on this issue?
is there any possibility to resend the old notifications manually?
Thanks,
Prasad

SMS message issues with N8!!!

Hey guys. Have the new N8, and want to love this phone, but just CAN'T when it fails send sms messages (with no explanation) without me chasing them around the phone. Only short messages send in conversation mode (say 10 - 20 characters); anything longer and I have to either move it to my drafts, and send from there, or move it to my drafts, change to multimedia message, and send from there... SUCH an inconvenience and causing me to hate this phone and want to get rid of it. Can ANYONE help with this problem?
Thank you.
- Durden

No resolution... Performed hard reset on phone (*#7370#), only added back a couple of important contacts. And the messaging problem is still present. What is going on here? I see that many other people have this problem and are yet to find a plausible fix.. Any other ideas/explanations? Cuz I am going to have to get rid of this if it takes this much effort to send txts.
Thanks.
-Durden

License issue with ISE setup

Good Day All,
For a setup of 2 ISE on 2 site, connected via a WAN Link. A 1000 users license is used.
My question is that if the WAN link is down, how will the license distribution be?
Will the secondary policy cease to accept new connection? or will be allow up to 500? or 1000?
Thanks & Regards
Andrew

This would depend on the ISE structure. If you only have one admin node then the connection to that admin node drops...the other ISE will stop funtioning, but if you have some sort of redundancy builtin to the structure it is possible to continue using both assuming you can use the same license base, but if you have 500 device license on one, and 500 on the other, then that will be the limit for each location.
For instance we have a single admin node, but 2 locations using ISE for VPN users....if the link goes down here, then no one can connect at the remote site. But people that connect to the VPN here will continue to function.

An issue with authentication and authorization on ISE 1.2

Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
end

Yes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.

ISE and SMS notification

Environment
ISE 1.1.2
As already stated in other posts in this forum, it appears there is a kind of limitation when configuring SMS Notification options via the ISE GUI interface under the "Administration ==> Web Portal Management ==> Settings ==> Sponsor ==> Language template ==> English ==> Configuring SMS Text message Notification" panel :
the Destination field, in this panel, can only contain explicitely the email address of the SMS Gateway;
it cannot contain an email address with the %mobilenumber% variable, such as %mobilenumber%@domain.com ;
this variable is never replaced by ISE;
I read the ISE User's Guide about that part which explains the Gateway can be an Email/SMS third party service Provider such as clickatell.com ;
but, it would have been more than nice if CISCO could take into account other kind of SMS gateways, especially those based on "off the rack" hard/soft appliances owned by the customer and whose most common way of working is by sending them an email with destination field based on the previously referred format : %mobilenumber%@domain.com ;
Is this a feature that could appear soon in futures ISE releases ?
thanks in advance

Hello, I'm trying with version 1.3.
In "SMTP API destination address:" field I have configured : [email protected]
In body field, I put for example "movil:$mobilenumber$"
Then, when testing, ISE don't put the phone number in "To:" field, but it's ok in the "body" field.
¿I'm doing something wrong or that functionality is not supported ?

Content distribution issue with message "Found package properties updated notification for package '00000123'"

I've got strange issue with 1 of my primary sites that started just recently. I've updated the content of 1 package and this now needs re-distribution to all DPs. I've got 3 primary sites and on 2 of those the update succeeded and my DP's got
updated correctly. One primary site it does not work and checking distrmgr.log I can see following message every xx minutes
Found package properties updated notification for package '000008B7' SMS_DISTRIBUTION_MANAGER 6/21/2014 12:00:31 AM 5836 (0x16CC) ==>
Checking Pkgxfermgr.log does not show anything either, I've tried with 2nd application but again the same result it only shows the the notification message.
I saw similar issue yesterday but with restart of the sms_exec service it eventually distributed the content, obviously this is not something I like to do too often.
does anyone have idea what this could be, suggestions are welcome. Thx.

Jason, I've checked the flow from the CAS down to the primary below is quick overview. The package I'm testing is just small package that we use to check replication is working in our environment it's less then 1MB in size and we run it
1/week basically update content and then check monitoring-content distribution that it has been received on our 260 DP's around the globe
CAS (Located in the US EST Time zone)
Distrmgr.log 11:25am update package and needs to be send to 3x primary sites (A00; B00; C00)
sender.log 11:30am all 3 primary sites have received the content.
C00 (Primary site in Singapore having the issue)
distrmgr.log 11:27pm received notification of the package
despool.log 11:32pm packaged content extracted successfully
distrmg.log started to see message Found notification for package '000008B7' and followed by next message
Package '000008B7' (priority 2) is already in queue.
This goes one until 1:21am (Singapore time)
Start updating the package 000008B7... SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
The Package Action is 1, the Update Mask is 160 and UpdateMaskEx is 0. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Use drive G for storing the compressed package. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Successfully created/updated the package 000008B7 SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SG-INTRA100.na.pg.com SITE=C00 PID=10132 TID=8296 GMTDATE=Fri Jun 20 17:21:45.848 2014 ISTR0="000008B7" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="000008B7"
After that nothing anymore.
When I check monitoring - content distribution I can see the package being updated/distributed to 80% of my DP's and last 20% are the dp connected below this Primary site.
To add to the confusion, there was another package distributed around the same time, and then one actually made it to the remote DP's.
This is first time I see this issue.

2 SMS Issues with Blackberry Curve 8530

Hi, I've had 2 issues with my SMS functions on my BB curve 8530 which is recently purchased.
1) I don't receive any form of notification when I receive SMSes, regardless of whether my BB is in Vibrate or Normal mode. The LED light does not flash either. I know (from other forums) that this is a common problem, but I have yet to find a valid solution for this. This problem occured around 1 month after using the BB.
2) Initially when using SMSes it comes in a chat format (e.g. history of the conversation will appear below as you type a reply) but now it only appears when I am viewing a received message. When I try to send a outgoing message, I am only able to see the history of messages I have typed, and not the ones received. How do I rectify this issue?
Thank you so much

Hello, i'm not sure about a solution for number 1, but i am experiencing the same problem for number 2. Before i changed my theme from the classsic one, everything was going okay with my texts but since i have changed it i can no longer view my messages as a conversation. I can still see my messages but i have to go all the way through the message menu ( sms inbox/outbox ect) I recommend that you open a message from your inbox, hit the blackberry key, scroll down to options, then general, then where it says theme controlled change it to combined. I tried that and it didnt work for me, but it might for you as it did to my friend. Good luck!

IPhone Locks with AT&T PrePay SMS Notification

iPhone Locks with AT&T PrePay SMS Notification.
I wanted to know if anyone else has experience this issue? Most of symptions are follows:
1.) I get the SMS notification all time whether I use the phone or not.
2.) Once I get the SMS notification, I have to constantly keep tapping on the screen until the phone decides to let me login. Note: Sometimes I have to hit the power buttom and re-tap the screen over and over again til it works.
I was just curious if I am only have this issue's or others to?

It will notify you for every lil' thing you do. If your sending a txt msg, it will let you know, after every call, surfing the internet, checking your email. On your email settings, how often do you have it to check your emails? Manually? Every 15 min? Half hour? One Hour? For example, if you have it checking your emails more frequently (ex. 15 min) you will notice more of them as oppose to checking them every Hour.

Iphone 4s siri and notifications issue? Maybe a problem with one of my processors??

Okay, so let me try to lay this out. Bottom line is, I am pretty sure it's an issue with something in my phone, but it isn't consistant enough to show to someone at the apple store, I've already tried haha.
So it's a relativly new phone, I got it late June of this year, 32 GB black (if those matter for anything) 4s. Before we continue, YES, I am exiting all my apps fully, quite often (nearly every hour or two). And I restart my phone every 3 or 4 days, I sync it with i-tunes pretty regularly, etc.
Some of the issues I'm having
1. Notifications
     When I get notifications (almost always texts, and I think I may have figgured this one out but it's ****** if I'm right) and I swipe THE NOTIFICATION in my lock screen, to open the message thread or call someone back, it will swipe, but it's like I only swipe it halfway, even when it show it being swiped all the way, and it just flys back to the left and doesn't react (doesn't go to the message). i'll swipe a few times and sometimes it will finally work. As it's gone on (for 2 months or so now) it's gotten so that it drops the message halfway throgh, even though I'm sure I didn't let go of the screen. I thought maybe my touch overlay there might be going bad or somehting but it happens all over the screen (top, middle, bottom, etc) when the notification is in a different location because of how many notifications i have.
     It doesn't seem to be related to the amount of notifications I have, or how long I've had them, or battery life, etc.
     It does seem to happen most with my girlfriends texts, I'd imagine the only corolation here is either that she texts me more often so just overall I do it more often to her, or that our text thread is really long. But it still happens even with short threads, or when there are no previous messages from that person. Just an idea.
2. Siri.
     I'll give siri a command. Very simple commands, and very complex alike, she (well i changed it to he, but it happens on both) won't react. "Call Laura" and the little circle orbiting the microphone will just spin. and spin. and spin. No "I didn't catch that" or "calling laura" or "calling craig". Just spinning. I hit the home button, try again, same story. Close all my apps. Same story. It used to be that I could re-start my phone and that would help, but even that doesn't work probably 80% of the time anymore.
Both of these problems happened in both IOS 5 and 6... So I'm lead to believe it's some sort of hardware problem. The reason I'm guessing processor is simply because I feel like my phone is not a LOT slower than other 4s', but noticably slower, It doesn't just react, it takes a second.
Also, this happened for the first time today, but with my Iphone luck i feel like it might happen again, I had something opened and needed to get to my home screen, so obviously I pushed the home button, nothing happened instantly, so I waited a second or so, nothing still so I pushed home again and the popup for open apps came up. So OBVIOUSLY it registered my first home button push, if it counded the second as a second push, but I am sure I waited long enough for it to have gone home after the first push. I pushed home for a third time, the menu went away and my home screen came up. No other crazy stuff going on.
and finaly, the reason I was prompted to finaly ask this. Back to the notification thing, I had a text (not my girlfriend so like i said, this happens with all texts). Swiped the notification over, phone shuts off. Not imedatly, it shows the apple surounded by black. then it turned itsself back on.
I love apple products, simply because they are simple and work. Androids always seem to slow down, they freeze up with age, etc. But this is very un-apple product-like. And I'm sure there's some fix for it.

Anything?

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

BYOD Onboarding issue with Redirects on ISE 1.2

Hi there,
I'm having intermittent issues with onboarding endpoints (both wired and wireless) with ISE 1.2 (Patch 12).
I get three differing scenarios upon attempting:
1). I get redirected to the ISE Self Registration Portal, register, download the supplicant OK and then can browse with no problems.
2) I dont get redirected at all and so never see the Self Registration portal. All browsing tries to go to the selected website and fails (presumably as the redirect URL is in place even if the browser is not "seeing" it). If I force the browser URL to to ISE I get the Self Registration Portal displayed but with no MAC details present so I can get no further.
3) I get redirected, and seemingly Register OK, download the profiles etc...but after a "Registered Sucessfully" message, any attempt to browse to external website is again redirected to the Portal. I can then re-register again (it lets me do that as if the first time) but I just end up in that loop forever.
These problems are mostly seen wirelessly (I have a WLC 5508) but also wired clients via 3850 wired ports. I am using a collection of endpoints (Andorid, IPads, Laptops) to test and de-registering them between attempts and the results are entirely random among the three scenarios.
I am not changing any policies in between attempts so they are working fine at times, and not at others.
Any help welcome!

Hi Neno,
Thanks for your reply. I have attached some info as requested. For AuthZ rules they should first hit an EAP-MSCHAPv2 rule via the secure SSID which redirects them to the NSP process and gives them an ACL on the WLC that only allows DHCP, DNS and traffic to from ISE.
Afterward registration they should then get a certificate and then after a COA reauthenticate using EAP-TLS.
All this works fine at times, but at other times Web traffic NEVER gets redirected to ISE to begin the registration process or alternatively endpoints are STUCK in a circle of registration in that the th redirect works OK and you register OK but the redirect is permanently on and you keep getting asked to re-register your device despite the fact you have already done it once.
If you can avoid either of these scenarios, it works absolutely fine. It feels like the endpoints themselves are the issue, as I am using a small set of test devices to register (and then de-register) to test with.
However the same device that wont work at all for many many attempts, will eventually suddenly work OK and the BYOD process completes. I do however seem to have a permanent problem with Surface Pro's in that I can never get them to see the redirect at all.

HT4623 Issue with anniversaries entry in notification drop down bar and calender app

Hi guys,
There is issue with notication dropdown and calender app in ios 7 which was not present in ios 6. The notification sync birthdays from contacts but only birthdays and not anniversaries.
same is with the calender app
what is the solution for this?

The problem is not with the phone per se. The problem is with Android 4.0 and your TB does not have 4.0. Because this phone is the "gold standard" of development for Android 4.0 it makes sense to report the problem here. If Verizon takes notice they will push the bug report up the food chain until some developer at Google or Samsung decides to fix it.

ISE Issue with DNS

Hello Techies,
I am facing challenge while configuring ISE to join AD. Domain Name lookup fails. DNS is working perfectly fine;
nslookup works fine on ISE for simple domain names, but on long domain names it fails while throwing the following error;
;; Truncated, retrying in TCP mode.
;; connection timed out; no servers could be reached
Upon searching on google, may threads discuss that it a common issue with linux, when multiple IP's are returned for DNS query. Solution is to make static entries in;
/etc/resolv.conf
Not able to find it in ISE, as it does not give access to the OS. I am running it on VMware.
Looking forward to get your valuable inputs to resolve this.
Thanks

Thanks for your response. Port 53(TCP) was opened on firewall & voila........nslookup was able to resolve the hostname.
Now there is another challenge because of huge environment. Active Directory forest contains more than 50+ child domain controllers. Policy is open for one particular hostname/ip. But authentication is not successful & ISE is not able to join domain. CISCO forums says that ports for all server should be open for ISE on the intermediate firewall, but it is a huge challenge for testing.
While I tried to give the FQDN of specific server(from whom ports are open on firewall), it is not getting resolved again.
Please sugeest

SMS Notification Issue with ISE 1.3

Similar Messages

Maybe you are looking for